summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2020-04-02arm64: smp: fix smp_send_stop() behaviourCristian Marussi
commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream. On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28arm64: fix alternatives with LLVM's integrated assemblerSami Tolvanen
[ Upstream commit c54f90c2627cc316d365e3073614731e17dbc631 ] LLVM's integrated assembler fails with the following error when building KVM: <inline asm>:12:6: error: expected absolute expression .if kvm_update_va_mask == 0 ^ <inline asm>:21:6: error: expected absolute expression .if kvm_update_va_mask == 0 ^ <inline asm>:24:2: error: unrecognized instruction mnemonic NOT_AN_INSTRUCTION ^ LLVM ERROR: Error parsing inline asm These errors come from ALTERNATIVE_CB and __ALTERNATIVE_CFG, which test for the existence of the callback parameter in inline assembly using the following expression: " .if " __stringify(cb) " == 0\n" This works with GNU as, but isn't supported by LLVM. This change splits __ALTERNATIVE_CFG and ALTINSTR_ENTRY into separate macros to fix the LLVM build. Link: https://github.com/ClangBuiltLinux/linux/issues/472 Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'Dirk Behme
commit d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream. Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'. Fix this by adding them to the target list. Make sure to match the order of the recipes in the makefile. Cc: stable@vger.kernel.org # v4.3+ Fixes: 0723c05fb75e44 ("arm64: enable more compressed Image formats") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 fieldWill Deacon
commit 2a355ec25729053bb9a1a89b6c1d1cdd6c3b3fb1 upstream. While the CSV3 field of the ID_AA64_PFR0 CPU ID register can be checked to see if a CPU is susceptible to Meltdown and therefore requires kpti to be enabled, existing CPUs do not implement this field. We therefore whitelist all unaffected Cortex-A CPUs that do not implement the CSV3 field. Signed-off-by: Will Deacon <will.deacon@arm.com> [florian: adjust whilelist location and table to stable-4.9.y] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29arm64: dts: juno: Fix UART frequencyAndre Przywara
[ Upstream commit 39a1a8941b27c37f79508426e27a2ec29829d66c ] Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29arm64: dts: apq8016-sbc: Increase load on l11 for SDCARDLoic Poulain
[ Upstream commit af61bef513ba179559e56908b8c465e587bc3890 ] In the same way as for msm8974-hammerhead, l11 load, used for SDCARD VMMC, needs to be increased in order to prevent any voltage drop issues (due to limited current) happening with some SDCARDS or during specific operations (e.g. write). Tested on Dragonboard-410c and DART-SD410 boards. Fixes: 4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support) Reported-by: Manabu Igusa <migusa@arrowjapan.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23arm64: dts: agilex/stratix10: fix pmu interrupt numbersDinh Nguyen
[ Upstream commit 210de0e996aee8e360ccc9e173fe7f0a7ed2f695 ] Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23arm64: Make sure permission updates happen for pmd/pudLaura Abbott
commit 82034c23fcbc2389c73d97737f61fa2dd6526413 upstream. Commit 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings") disallowed block mappings for ioremap since that code does not honor break-before-make. The same APIs are also used for permission updating though and the extra checks prevent the permission updates from happening, even though this should be permitted. This results in read-only permissions not being fully applied. Visibly, this can occasionaly be seen as a failure on the built in rodata test when the test data ends up in a section or as an odd RW gap on the page table dump. Fix this by using pgattr_change_is_safe instead of p*d_present for determining if the change is permitted. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reported-by: Peter Robinson <pbrobinson@gmail.com> Fixes: 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: Enforce BBM for huge IO/VMAP mappingsWill Deacon
commit 15122ee2c515a253b0c66a3e618bc7ebe35105eb upstream. ioremap_page_range doesn't honour break-before-make and attempts to put down huge mappings (using p*d_set_huge) over the top of pre-existing table entries. This leads to us leaking page table memory and also gives rise to TLB conflicts and spurious aborts, which have been seen in practice on Cortex-A75. Until this has been resolved, refuse to put block mappings when the existing entry is found to be present. Fixes: 324420bf91f60 ("arm64: add support for ioremap() block mappings") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reported-by: Lei Li <lious.lilei@hisilicon.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: mm: Change page table pointer name in p[md]_set_huge()Ben Hutchings
This is preparation for the following backported fixes. It was done upstream as part of commit 20a004e7b017 "arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables", the rest of which does not seem suitable for stable. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: don't open code page table entry creationKristina Martsenko
commit 193383043f14a398393dc18bae8380f7fe665ec3 upstream. Instead of open coding the generation of page table entries, use the macros/functions that exist for this - pfn_p*d and p*d_populate. Most code in the kernel already uses these macros, this patch tries to fix up the few places that don't. This is useful for the next patch in this series, which needs to change the page table entry logic, and it's better to have that logic in one place. The KVM extended ID map is special, since we're creating a level above CONFIG_PGTABLE_LEVELS and the required function isn't available. Leave it as is and add a comment to explain it. (The normal kernel ID map code doesn't need this change because its page tables are created in assembly (__create_page_tables)). Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23arm64: mm: BUG on unsupported manipulations of live kernel mappingsArd Biesheuvel
commit e98216b52176ba2bfa4bdb02f178f4d08832d465 upstream. Now that we take care not manipulate the live kernel page tables in a way that may lead to TLB conflicts, the case where a table mapping is replaced by a block mapping can no longer occur. So remove the handling of this at the PUD and PMD levels, and instead, BUG() on any occurrence of live kernel page table manipulations that modify anything other than the permission bits. Since mark_rodata_ro() is the only caller where the kernel mappings that are being manipulated are actually live, drop the various conditional flush_tlb_all() invocations, and add a single call to mark_rodata_ro() instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12arm64: Revert support for execute-only user mappingsCatalin Marinas
commit 24cecc37746393432d994c0dbc251fb9ac7c5d72 upstream. The ARMv8 64-bit architecture supports execute-only user permissions by clearing the PTE_USER and PTE_UXN bits, practically making it a mostly privileged mapping but from which user running at EL0 can still execute. The downside, however, is that the kernel at EL1 inadvertently reading such mapping would not trip over the PAN (privileged access never) protection. Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce execute-only page access permissions") so that PROT_EXEC implies PROT_READ (and therefore PTE_USER) until the architecture gains proper support for execute-only user mappings. Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions") Cc: <stable@vger.kernel.org> # 4.9.x- Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()Yunfeng Ye
[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ] In cases like suspend-to-disk and suspend-to-ram, a large number of CPU cores need to be shut down. At present, the CPU hotplug operation is serialised, and the CPU cores can only be shut down one by one. In this process, if PSCI affinity_info() does not return LEVEL_OFF quickly, cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores need to be shut down, it will take a long time. Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So change the wait interval from 10 ms to max 1 ms and use usleep_range() instead of msleep() for more accurate timer. In addition, reducing the time interval will increase the messages output, so remove the "Retry ..." message, instead, track time and output to the the sucessful message. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-21arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulatorJon Hunter
commit 1e5e929c009559bd7e898ac8e17a5d01037cb057 upstream. Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") added a regulator for HDMI on the Jetson TX1 platform. This regulator has an active high enable, but the GPIO specifier for enabling the regulator incorrectly defines it as active-low. This causes the following warning to occur on boot ... WARNING KERN regulator@10 GPIO handle specifies active low - ignored The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier which aligns with the presense of the 'enable-active-high' property. Fixes: 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05arm64: smp: Handle errors reported by the firmwareSuzuki K Poulose
[ Upstream commit f357b3a7e17af7736d67d8267edc1ed3d1dd9391 ] The __cpu_up() routine ignores the errors reported by the firmware for a CPU bringup operation and looks for the error status set by the booting CPU. If the CPU never entered the kernel, we could end up in assuming stale error status, which otherwise would have been set/cleared appropriately by the booting CPU. Reported-by: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05arm64: mm: Prevent mismatched 52-bit VA supportSteve Capper
[ Upstream commit a96a33b1ca57dbea4285893dedf290aeb8eb090b ] For cases where there is a mismatch in ARMv8.2-LVA support between CPUs we have to be careful in allowing secondary CPUs to boot if 52-bit virtual addresses have already been enabled on the boot CPU. This patch adds code to the secondary startup path. If the boot CPU has enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the secondary can also enable 52-bit support. If not, the secondary is prevented from booting and an error message is displayed indicating why. Technically this patch could be implemented using the cpufeature code when considering 52-bit userspace support. However, we employ low level checks here as the cpufeature code won't be able to run if we have mismatched 52-bit kernel va support. Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28arm64: fix for bad_mode() handler to always result in panicHari Vyas
commit e4ba15debcfd27f60d43da940a58108783bff2a6 upstream. The bad_mode() handler is called if we encounter an uunknown exception, with the expectation that the subsequent call to panic() will halt the system. Unfortunately, if the exception calling bad_mode() is taken from EL0, then the call to die() can end up killing the current user task and calling schedule() instead of falling through to panic(). Remove the die() call altogether, since we really want to bring down the machine in this "impossible" case. Signed-off-by: Hari Vyas <hari.vyas@broadcom.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-28arm64: makefile fix build of .i file in external module caseVictor Kamensky
[ Upstream commit 98356eb0ae499c63e78073ccedd9a5fc5c563288 ] After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if one will try to build .i file in case of external kernel module, build fails complaining that prepare0 target is missing. This issue came up with SystemTap when it tries to build variety of .i files for its own generated kernel modules trying to figure given kernel features/capabilities. The issue is that prepare0 is defined in top level Makefile only if KBUILD_EXTMOD is not defined. .i file rule depends on prepare and in case KBUILD_EXTMOD defined top level Makefile contains empty rule for prepare. But after mentioned commit arch/arm64/Makefile would introduce dependency on prepare0 through its own prepare target. Fix it to put proper ifdef KBUILD_EXTMOD around code introduced by mentioned commit. It matches what top level Makefile does. Acked-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess faultPavel Tatashin
commit 94bb804e1e6f0a9a77acf20d7c70ea141c6c821e upstream. A number of our uaccess routines ('__arch_clear_user()' and '__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they encounter an unhandled fault whilst accessing userspace. For CPUs implementing both hardware PAN and UAO, this bug has no effect when both extensions are in use by the kernel. For CPUs implementing hardware PAN but not UAO, this means that a kernel using hardware PAN may execute portions of code with PAN inadvertently disabled, opening us up to potential security vulnerabilities that rely on userspace access from within the kernel which would usually be prevented by this mechanism. In other words, parts of the kernel run the same way as they would on a CPU without PAN implemented/emulated at all. For CPUs not implementing hardware PAN and instead relying on software emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately much worse. Calling 'schedule()' with software PAN disabled means that the next task will execute in the kernel using the page-table and ASID of the previous process even after 'switch_mm()', since the actual hardware switch is deferred until return to userspace. At this point, or if there is a intermediate call to 'uaccess_enable()', the page-table and ASID of the new process are installed. Sadly, due to the changes introduced by KPTI, this is not an atomic operation and there is a very small window (two instructions) where the CPU is configured with the page-table of the old task and the ASID of the new task; a speculative access in this state is disastrous because it would corrupt the TLB entries for the new task with mappings from the previous address space. As Pavel explains: | I was able to reproduce memory corruption problem on Broadcom's SoC | ARMv8-A like this: | | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's | stack is accessed and copied. | | The test program performed the following on every CPU and forking | many processes: | | unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE, | MAP_SHARED | MAP_ANONYMOUS, -1, 0); | map[0] = getpid(); | sched_yield(); | if (map[0] != getpid()) { | fprintf(stderr, "Corruption detected!"); | } | munmap(map, PAGE_SIZE); | | From time to time I was getting map[0] to contain pid for a | different process. Ensure that PAN is re-enabled when returning after an unhandled user fault from our uaccess routines. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Fixes: 338d4f49d6f7 ("arm64: kernel: Add support for Privileged Access Never") Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> [will: rewrote commit message] [will: backport for 4.9.y stable kernels] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-25arm64/numa: Report correct memblock range for the dummy nodeAnshuman Khandual
[ Upstream commit 77cfe950901e5c13aca2df6437a05f39dd9a929b ] The dummy node ID is marked into all memory ranges on the system. So the dummy node really extends the entire memblock.memory. Hence report correct extent information for the dummy node using memblock range helper functions instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)]. Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms") Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25arm64: dts: lg: Fix SPI controller node namesRob Herring
[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ] SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Chanho Min <chanho.min@lge.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25arm64: dts: amd: Fix SPI bus warningsRob Herring
[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ] dtc has new checks for SPI buses. Fix the warnings in node names. arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' Cc: Brijesh Singh <brijeshkumar.singh@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supplyAapo Vienamo
[ Upstream commit 6ff7705da8806de45ca1490194f0b4eb07725804 ] On p2180 sdmmc4 is powered from a fixed 1.8 V regulator. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07arm64: fix unreachable code issue with cmpxchgArnd Bergmann
[ Upstream commit 920fdab7b3ce98c14c840261e364f490f3679a62 ] On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined when CONFIG_OPTIMIZE_INLINING is set. Clang then fails a compile-time assertion, because it cannot tell at compile time what the size of the argument is: mm/memcontrol.o: In function `__cmpxchg_mb': memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175' memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175' Mark all of the cmpxchg() style functions as __always_inline to ensure that the compiler can see the result. Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/648 Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Tested-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05arm64: kpti: ensure patched kernel text is fetched from PoUMark Rutland
[ Upstream commit f32c7a8e45105bd0af76872bf6eef0438ff12fb2 ] While the MMUs is disabled, I-cache speculation can result in instructions being fetched from the PoC. During boot we may patch instructions (e.g. for alternatives and jump labels), and these may be dirty at the PoU (and stale at the PoC). Thus, while the MMU is disabled in the KPTI pagetable fixup code we may load stale instructions into the I-cache, potentially leading to subsequent crashes when executing regions of code which have been modified at runtime. Similarly to commit: 8ec41987436d566f ("arm64: mm: ensure patched kernel text is fetched from PoU") ... we can invalidate the I-cache after enabling the MMU to prevent such issues. The KPTI pagetable fixup code itself should be clean to the PoC per the boot protocol, so no maintenance is required for this code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25arm64: compat: Allow single-byte watchpoints on all addressesWill Deacon
commit 849adec41203ac5837c40c2d7e08490ffdef3c2c upstream. Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses") changed the validation requirements for hardware watchpoints on arch/arm/. Update our compat layer to implement the same relaxation. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25arm64/mm: fix variable 'pud' set but not usedQian Cai
[ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ] GCC throws a warning, arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page': arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used [-Wunused-but-set-variable] pud_t pud; ^~~ because pud_table() is a macro and compiled away. Fix it by making it a static inline function and for pud_sect() as well. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25arm64/efi: fix variable 'si' set but not usedQian Cai
[ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ] GCC throws out this warning on arm64. drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry': drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si' set but not used [-Wunused-but-set-variable] Fix it by making free_screen_info() a static inline function. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25bpf: get rid of pure_initcall dependency to enable jitsDaniel Borkmann
commit fa9dd599b4dae841924b022768354cfde9affecb upstream. Having a pure_initcall() callback just to permanently enable BPF JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave a small race window in future where JIT is still disabled on boot. Since we know about the setting at compilation time anyway, just initialize it properly there. Also consolidate all the individual bpf_jit_enable variables into a single one and move them under one location. Moreover, don't allow for setting unspecified garbage values on them. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [bwh: Backported to 4.9 as dependency of commit 2e4a30983b0f "bpf: restrict access to core bpf sysctls": - Drop change in arch/mips/net/ebpf_jit.c - Drop change to bpf_jit_kallsyms - Adjust filenames, context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-11arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}Will Deacon
commit 147b9635e6347104b91f48ca9dca61eb0fbf2a54 upstream. If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have their architecturally maximum values, which defeats the use of FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous machines. Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively saturate at zero. Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers") Cc: <stable@vger.kernel.org> # 4.9.y only Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-11arm64: cpufeature: Fix CTR_EL0 field definitionsWill Deacon
commit be68a8aaf925aaf35574260bf820bb09d2f9e07f upstream. Our field definitions for CTR_EL0 suffer from a number of problems: - The IDC and DIC fields are missing, which causes us to enable CTR trapping on CPUs with either of these returning non-zero values. - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as FTR_HIGHER_SAFE so that applications can use it to avoid false sharing. - [nit] A RES1 field is described as "RAO" This patch updates the CTR_EL0 field definitions to fix these issues. Cc: <stable@vger.kernel.org> # 4.9.y only Cc: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04arm64: compat: Provide definition for COMPAT_SIGMINSTKSZWill Deacon
commit 24951465cbd279f60b1fdc2421b3694405bcff42 upstream. arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value for compat tasks. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04arm64: dts: marvell: Fix A37xx UART0 register sizeallen yan
commit c737abc193d16e62e23e2fb585b8b7398ab380d8 upstream. Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are the UART1 registers that should not be declared in this node. Update the example in DT bindings document accordingly. Signed-off-by: allen yan <yanwei@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04arm64: tegra: Fix AGIC register rangeJon Hunter
commit ba24eee6686f6ed3738602b54d959253316a9541 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Fixes: bcdbde433542 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04arm64: tegra: Update Jetson TX1 GPU regulator timingsJon Hunter
commit ece6031ece2dd64d63708cfe1088016cee5b10c0 upstream. The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which not sufficient because the enable ramp delay has been measured to be greater than 1ms. Furthermore, the downstream kernels released by NVIDIA for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of 160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be 2ms and add a settling delay of 160us. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 5e6b9a89afce ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04crypto: arm64/sha2-ce - correct digest for empty data in finupElena Petrova
commit 6bd934de1e393466b319d29c4427598fda096c57 upstream. The sha256-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: the actual digest, result: initial value of SHA internal state. The error is in sha256_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha2_ce_transform to make the final round. However, in sha256_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 03802f6a80b3a ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04crypto: arm64/sha1-ce - correct digest for empty data in finupElena Petrova
commit 1d4aaf16defa86d2665ae7db0259d6cb07e2091f upstream. The sha1-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: da39a3ee..., result: 67452301... (initial value of SHA internal state). The error is in sha1_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha1_ce_transform to make the final round. However, in sha1_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 07eb54d306f4 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04acpi/arm64: ignore 5.1 FADTs that are reported as 5.0Ard Biesheuvel
[ Upstream commit 2af22f3ec3ca452f1e79b967f634708ff01ced8a ] Some Qualcomm Snapdragon based laptops built to run Microsoft Windows are clearly ACPI 5.1 based, given that that is the first ACPI revision that supports ARM, and introduced the FADT 'arm_boot_flags' field, which has a non-zero field on those systems. So in these cases, infer from the ARM boot flags that the FADT must be 5.1 or later, and treat it as 5.1. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitlyNathan Chancellor
[ Upstream commit aa69fb62bea15126e744af2e02acc0d6cf3ed4da ] After r363059 and r363928 in LLVM, a build using ld.lld as the linker with CONFIG_RANDOMIZE_BASE enabled fails like so: ld.lld: error: relocation R_AARCH64_ABS32 cannot be used against symbol __efistub_stext_offset; recompile with -fPIC Fangrui and Peter figured out that ld.lld is incorrectly considering __efistub_stext_offset as a relative symbol because of the order in which symbols are evaluated. _text is treated as an absolute symbol and stext is a relative symbol, making __efistub_stext_offset a relative symbol. Adding ABSOLUTE will force ld.lld to evalute this expression in the right context and does not change ld.bfd's behavior. ld.lld will need to be fixed but the developers do not see a quick or simple fix without some research (see the linked issue for further explanation). Add this simple workaround so that ld.lld can continue to link kernels. Link: https://github.com/ClangBuiltLinux/linux/issues/561 Link: https://github.com/llvm/llvm-project/commit/025a815d75d2356f2944136269aa5874721ec236 Link: https://github.com/llvm/llvm-project/commit/249fde85832c33f8b06c6b4ac65d1c4b96d23b83 Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Debugged-by: Fangrui Song <maskray@google.com> Debugged-by: Peter Smith <peter.smith@linaro.org> Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [will: add comment] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21arm64: crypto: remove accidentally backported filesMark Rutland
In the v4.9.y backport commit: 5ac0682830b31c4fba72a208a3c1c4bbfcc9f7f8 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") ... I accidentally added unrelated arm64/crypto files which were not part of the upstream commit: b092201e0020614127f495c092e0a12d26a2116e ... and are not used at all in the v4.9.y tree. This patch reverts the accidental addition. These files should not have been backported, and having them in the v4.9.y tree is at best confusing. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10arm64: kaslr: keep modules inside module region when KASAN is enabledArd Biesheuvel
commit 6f496a555d93db7a11d4860b9220d904822f586a upstream. When KASLR and KASAN are both enabled, we keep the modules where they are, and randomize the placement of the kernel so it is within 2 GB of the module region. The reason for this is that putting modules in the vmalloc region (like we normally do when KASLR is enabled) is not possible in this case, given that the entire vmalloc region is already backed by KASAN zero shadow pages, and so allocating dedicated KASAN shadow space as required by loaded modules is not possible. The default module allocation window is set to [_etext - 128MB, _etext] in kaslr.c, which is appropriate for KASLR kernels booted without a seed or with 'nokaslr' on the command line. However, as it turns out, it is not quite correct for the KASAN case, since it still intersects the vmalloc region at the top, where attempts to allocate shadow pages will collide with the KASAN zero shadow pages, causing a WARN() and all kinds of other trouble. So cap the top end to MODULES_END explicitly when running with KASAN. Cc: <stable@vger.kernel.org> # 4.9+ Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: backport to 4.9.y] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10arm64, vdso: Define vdso_{start,end} as arrayKees Cook
Commit dbbb08f500d6146398b794fdc68a8e811366b451 upstream. Adjust vdso_{start|end} to be char arrays to avoid compile-time analysis that flags "too large" memcmp() calls with CONFIG_FORTIFY_SOURCE. Cc: Jisheng Zhang <jszhang@marvell.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22arm64/mm: Inhibit huge-vmap with ptdumpMark Rutland
[ Upstream commit 7ba36eccb3f83983a651efd570b4f933ecad1b5c ] The arm64 ptdump code can race with concurrent modification of the kernel page tables. At the time this was added, this was sound as: * Modifications to leaf entries could result in stale information being logged, but would not result in a functional problem. * Boot time modifications to non-leaf entries (e.g. freeing of initmem) were performed when the ptdump code cannot be invoked. * At runtime, modifications to non-leaf entries only occurred in the vmalloc region, and these were strictly additive, as intermediate entries were never freed. However, since commit: commit 324420bf91f6 ("arm64: add support for ioremap() block mappings") ... it has been possible to create huge mappings in the vmalloc area at runtime, and as part of this existing intermediate levels of table my be removed and freed. It's possible for the ptdump code to race with this, and continue to walk tables which have been freed (and potentially poisoned or reallocated). As a result of this, the ptdump code may dereference bogus addresses, which could be fatal. Since huge-vmap is a TLB and memory optimization, we can disable it when the runtime ptdump code is in use to avoid this problem. Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: 324420bf91f60582 ("arm64: add support for ioremap() block mappings") Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31arm64: cpu_ops: fix a leaked reference by adding missing of_node_putWen Yang
[ Upstream commit 92606ec9285fb84cd9b5943df23f07d741384bfc ] The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm64/kernel/cpu_ops.c:102:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 69, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31arm64: vdso: Fix clock_getres() for CLOCK_REALTIMEVincenzo Frascino
[ Upstream commit 81fb8736dd81da3fe94f28968dac60f392ec6746 ] clock_getres() in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; where 'hrtimer_resolution' depends on whether or not high resolution timers are enabled, which is a runtime decision. The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this by exposing 'hrtimer_resolution' in the vDSO datapage and returning that instead. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variableQian Cai
[ Upstream commit 74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ] When building with -Wunused-but-set-variable, the compiler shouts about a number of pte_unmap() users, since this expands to an empty macro on arm64: | mm/gup.c: In function 'gup_pte_range': | mm/gup.c:1727:16: warning: variable 'ptem' set but not used | [-Wunused-but-set-variable] | mm/gup.c: At top level: | mm/memory.c: In function 'copy_pte_range': | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used | [-Wunused-but-set-variable] | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used | [-Wunused-but-set-variable] | mm/swap_state.c: In function 'swap_ra_info': | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] | mm/madvise.c: In function 'madvise_free_pte_range': | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] Rewrite pte_unmap() as a static inline function, which silences the warnings. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31arm64: Save and restore OSDLR_EL1 across suspend/resumeJean-Philippe Brucker
commit 827a108e354db633698f0b4a10c1ffd2b1f8d1d0 upstream. When the CPU comes out of suspend, the firmware may have modified the OS Double Lock Register. Save it in an unused slot of cpu_suspend_ctx, and restore it on resume. Cc: <stable@vger.kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21arm64: Clear OSDLR_EL1 on CPU bootJean-Philippe Brucker
commit 6fda41bf12615ee7c3ddac88155099b1a8cf8d00 upstream. Some firmwares may reboot CPUs with OS Double Lock set. Make sure that it is unlocked, in order to use debug exceptions. Cc: <stable@vger.kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21arm64: compat: Reduce address limitVincenzo Frascino
commit d263119387de9975d2acba1dfd3392f7c5979c18 upstream. Currently, compat tasks running on arm64 can allocate memory up to TASK_SIZE_32 (UL(0x100000000)). This means that mmap() allocations, if we treat them as returning an array, are not compliant with the sections 6.5.8 of the C standard (C99) which states that: "If the expression P points to an element of an array object and the expression Q points to the last element of the same array object, the pointer expression Q+1 compares greater than P". Redefine TASK_SIZE_32 to address the issue. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [will: fixed typo in comment] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-29 19:30:34 +0000