summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Expand)Author
2014-02-21ARM: dts: imx6q-phytec: Added GPMI-NAND SupportAshutosh singh
2014-02-21ARM: dts: imx6q-phytec: Added USB_HOST SupportAshutosh singh
2014-02-21ARM: dts: imx6q-phytec: Added USB_OTG SupportAshutosh singh
2014-02-20ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabledFabio Estevam
2014-02-20ARM: dts: imx6qdl-sabreauto: Support debug LEDLiu Ying
2014-02-13ARM: dts: imx6q: add 852MHz setpoint for CPU freqAnson Huang
2014-02-10ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interruptSascha Silbe
2014-02-10ARM: dts: imx6sl-evk: Add debug LED supportFabio Estevam
2014-02-10ARM: dts: imx6qdl-sabreauto: Add PFUZE100 supportFabio Estevam
2014-02-10ARM: dts: imx6sl-evk: Add audio supportFabio Estevam
2014-02-10ARM: dts: imx6sl-evk: Add PFUZE100 supportFabio Estevam
2014-02-10ARM: dts: imx6qdl-sabresd: correct gpio key's active stateAnson Huang
2014-02-10ARM: dts: imx6q: Add support for Zealz GK802imx6-dt-3.15Sascha Hauer
2014-02-10ARM: dts: imx6: Add DFI FS700-M60 board supportSascha Hauer
2014-02-10ARM: dts: imx6: use imx51-ssiMarkus Pargmann
2014-02-10ARM: dts: imx6qdl: Add mmc aliasesSascha Hauer
2014-02-10ARM: dts: imx6q: Add spi4 aliasSascha Hauer
2014-02-10ARM: dts: imx6qdl-sabreauto: Add LVDS supportFabio Estevam
2014-02-10ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.Anson Huang
2014-02-10ARM: dts: imx6sl: add ocram device supportAnson Huang
2014-02-10ARM: dts: imx6qdl: enable dma for spiFrank Li
2014-02-10ARM: dts: imx6qdl-sabresd: Add PFUZE100 supportFabio Estevam
2014-02-10ARM: dts: imx6: add mxs phy controller idPeter Chen
2014-02-10ARM: dts: imx6: add anatop phandle for usbphyPeter Chen
2014-02-10ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-10ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-10ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.Troy Kisky
2014-02-09ARM: dts: imx6qdl: use interrupts-extended for fecTroy Kisky
2014-02-09ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQTroy Kisky
2014-02-09ARM: dts: imx6q-sabrelite: PHY reset is active-lowPhilipp Zabel
2014-02-09ARM: dts: imx6: Use 'vddarm' as the regulator nameFabio Estevam
2014-02-09ARM: dts: imx6qdl-sabresd: Add power key supportAnson Huang
2014-02-09ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.John Tobias
2014-02-09ARM: dts: imx6qdl: add necessary thermal clkAnson Huang
2014-02-09ARM: dts: imx6dl: enable cpufreq supportAnson Huang
2014-02-09ARM: dts: imx6q: add vddsoc/pu setpoint infoAnson Huang
2014-02-09ARM: dts: imx6q: update setting of VDDARM_CAP voltageAnson Huang
2014-02-09ARM: dts: imx6qdl-sabrelite: add gpio-keysTroy Kisky
2014-02-09ARM: dts: imx: add nitrogen6x boardTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotgTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: fix ENET groupTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: add skews for Micrel phyTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: add pwms for backlightsTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclkTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enetTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotgTroy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1Troy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3Troy Kisky
2014-02-09ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4Troy Kisky
2014-02-09ARM: dts: imx6qdl: add spdif support for sabreautoNicolin Chen