summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2015-06-05ARM: fix missing syscall trace exitRussell King
commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by: Josh Stone <jistone@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-05ARM: dts: imx27: only map 4 Kbyte for fec registersPhilippe Reynes
commit a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce upstream. According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-17ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTCGregory CLEMENT
commit 750e30d4076ae5e02ad13a376e96c95a2627742c upstream. There is no crystal connected to the internal RTC on the Open Block AX3. So let's disable it in order to prevent the kernel probing the driver uselessly. Eventually this patches removes the following warning message from the boot log: "rtc-mv d0010300.rtc: internal RTC not ticking" Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-17ARM: dts: imx23-olinuxino: Fix dr_mode of usb0Stefan Wahren
commit 0fdebe1a2f4d3a8fc03754022fabf8ba95e131a3 upstream. The dr_mode of usb0 on imx233-olinuxino is left to default "otg". Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the same pin as USB_OTG_ID it's possible to disable USB host by LED toggling: echo 0 > /sys/class/leds/green/brightness [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1 [ 1068.890000] usb usb1: USB disconnect, device number 1 [ 1068.920000] usb 1-1: USB disconnect, device number 2 [ 1068.920000] usb 1-1.1: USB disconnect, device number 3 [ 1069.070000] usb 1-1.2: USB disconnect, device number 4 [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 This patch fixes the issue by setting dr_mode to "host" in the dts file. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Peter Chen <peter.chen@freescale.com> Fixes: b49312948285 ("ARM: dts: imx23-olinuxino: Add USB host support") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-17ARM: dts: imx28: Fix AUART4 TX-DMA interrupt nameMarek Vasut
commit 4ada77e37a773168fea484899201e272ab44ba8b upstream. Fix a typo in the TX DMA interrupt name for AUART4. This patch makes AUART4 operational again. Signed-off-by: Marek Vasut <marex@denx.de> Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-17ARM: dts: imx25: Add #pwm-cells to pwm4Markus Pargmann
commit f90d3f0d0a11fa77918fd5497cb616dd2faa8431 upstream. The property '#pwm-cells' is currently missing. It is not possible to use pwm4 without this property. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Fixes: 5658a68fb578 ("ARM i.MX25: Add devicetree") Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13ARM: dts: dove: Fix uart[23] reg propertySebastian Hesselbarth
commit a74cd13b807029397f7232449df929bac11fb228 upstream. Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on CragganmoreCharles Keepax
commit 4e330ae4ab2915444f1e6dca1358a910aa259362 upstream. There are two PMICs on Cragganmore, currently one dynamically assign its IRQ base and the other uses a fixed base. It is possible for the statically assigned PMIC to fail if its IRQ is taken by the dynamically assigned one. Fix this by statically assigning both the IRQ bases. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASEAndrey Ryabinin
commit 8defb3367fcd19d1af64c07792aade0747b54e0f upstream. Usually ELF_ET_DYN_BASE is 2/3 of TASK_SIZE. With 3G/1G user/kernel split this is not so, because 2*TASK_SIZE overflows 32 bits, so the actual value of ELF_ET_DYN_BASE is: (2 * TASK_SIZE / 3) = 0x2a000000 When ASLR is disabled PIE binaries will load at ELF_ET_DYN_BASE address. On 32bit platforms AddressSanitzer uses addresses [0x20000000 - 0x40000000] for shadow memory [1]. So ASan doesn't work for PIE binaries when ASLR disabled as it fails to map shadow memory. Also after Kees's 'split ET_DYN ASLR from mmap ASLR' patchset PIE binaries has a high chance of loading somewhere in between [0x2a000000 - 0x40000000] even if ASLR enabled. This makes ASan with PIE absolutely incompatible. Fix overflow by dividing TASK_SIZE prior to multiplying. After this patch ELF_ET_DYN_BASE equals to (for CONFIG_VMSPLIT_3G=y): (TASK_SIZE / 3 * 2) = 0x7f555554 [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerAlgorithm#Mapping Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reported-by: Maria Guseva <m.guseva@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26ARM: at91: pm: fix at91rm9200 standbyAlexandre Belloni
commit 84e871660bebfddb9a62ebd6f19d02536e782f0a upstream. at91rm9200 standby and suspend to ram has been broken since 00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06hx4700: regulator: declare full constraintsMartin Vajnar
commit a52d209336f8fc7483a8c7f4a8a7d2a8e1692a6c upstream. Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped working. This patch enables the "replacement" for REGULATOR_DUMMY and allows the touchscreen to work even though there is no regulator for "vcc". Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06ARM: pxa: add regulator_has_full_constraints to poodle board fileDmitry Eremin-Solenikov
commit 9bc78f32c2e430aebf6def965b316aa95e37a20c upstream. Add regulator_has_full_constraints() call to poodle board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on poodle if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06ARM: pxa: add regulator_has_full_constraints to corgi board fileDmitry Eremin-Solenikov
commit 271e80176aae4e5b481f4bb92df9768c6075bbca upstream. Add regulator_has_full_constraints() call to corgi board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on corgi if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 corgi-audio corgi-audio: ASoC: failed to instantiate card -517 Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06ARM: 8284/1: sa1100: clear RCSR_SMR on resumeDmitry Eremin-Solenikov
commit e461894dc2ce7778ccde1c3483c9b15a85a7fc5f upstream. StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset by entering the sleep mode. After we have resumed, there is little point in having that bit enabled. Moreover, if this bit is set before reboot, the bootloader can become confused. Thus clear the SMR bit on resume just before clearing the scratchpad (resume address) register. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAESteven Capper
commit ded9477984690d026e46dd75e8157392cea3f13f upstream. For LPAE, we have the following means for encoding writable or dirty ptes: L_PTE_DIRTY L_PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writeable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writeable but not dirty. This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58, and adds additional logic to set AP[2] whenever the pte is read only or not dirty. That way we can distinguish between clean writeable ptes and read only ptes. HugeTLB pages will use this new logic automatically. We need to add some logic to Transparent HugePages to ensure that they correctly interpret the revised pgprot permissions (L_PTE_RDONLY has moved and no longer matches PMD_SECT_AP2). In the process of revising THP, the names of the PMD software bits have been prefixed with L_ to make them easier to distinguish from their hardware bit counterparts. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [hpy: Backported to 3.10 - adjust the context - ignore change related to pmd, because 3.10 does not support HugePage ] Signed-off-by: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclearSteven Capper
commit f2950706871c4b6e8c0f0d7c3f62d35930b8de63 upstream. Long descriptors on ARM are 64 bits, and some pte functions such as pte_dirty return a bitwise-and of a flag with the pte value. If the flag to be tested resides in the upper 32 bits of the pte, then we run into the danger of the result being dropped if downcast. For example: gather_stats(page, md, pte_dirty(*pte), 1); where pte_dirty(*pte) is downcast to an int. This patch introduces a new macro pte_isset which performs the bitwise and, then performs a double logical invert (where needed) to ensure predictable downcasting. The logical inverse pte_isclear is also introduced. Equivalent pmd functions for Transparent HugePages have also been added. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [hpy: Backported to 3.10: - adjust the context - ignore change to pmd, because 3.10 does not support HugePage.] Signed-off-by: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: DMA: ensure that old section mappings are flushed from the TLBRussell King
commit 6b076991dca9817e75c37e2f0db6d52611ea42fa upstream. When setting up the CMA region, we must ensure that the old section mappings are flushed from the TLB before replacing them with page tables, otherwise we can suffer from mismatched aliases if the CPU speculatively prefetches from these mappings at an inopportune time. A mismatched alias can occur when the TLB contains a section mapping, but a subsequent prefetch causes it to load a page table mapping, resulting in the possibility of the TLB containing two matching mappings for the same virtual address region. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 7931/1: Correct virt_addr_validLaura Abbott
commit efea3403d4b7c6d1dd5d5ac3234c161e8b314d66 upstream. The definition of virt_addr_valid is that virt_addr_valid should return true if and only if virt_to_page returns a valid pointer. The current definition of virt_addr_valid only checks against the virtual address range. There's no guarantee that just because a virtual address falls bewteen PAGE_OFFSET and high_memory the associated physical memory has a valid backing struct page. Follow the example of other architectures and convert to pfn_valid to verify that the virtual address is actually valid. The check for an address between PAGE_OFFSET and high_memory is still necessary as vmalloc/highmem addresses are not valid with virt_to_page. Cc: Will Deacon <will.deacon@arm.com> Cc: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: fix asm/memory.h build errorRussell King
commit b713aa0b15015a65ad5421543b80df86de043d62 upstream. Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is not defined: In file included from arch/arm/include/asm/page.h:163:0, from include/linux/mm_types.h:16, from include/linux/sched.h:24, from arch/arm/kernel/asm-offsets.c:13: arch/arm/include/asm/memory.h: In function '__virt_to_phys': arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function) arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in arch/arm/include/asm/memory.h: In function '__phys_to_virt': arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function) Fixes: ca5a45c06cd4 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions") Tested-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [hpy: Backported to 3.10: - adjust the context - MPU is not supported by 3.10, so ignore fix to MPU compared with the original patch.] Signed-off-by: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' ↵Chen Gang
in atomic_cmpxchg(). commit 4dcc1cf7316a26e112f5c9fcca531ff98ef44700 upstream. For atomic_cmpxchg(), the type of 'oldval' need be 'int' to match the type of "*ptr" (used by 'ldrex' instruction) and 'old' (used by 'teq' instruction). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.hChen Gang
commit 237f12337cfa2175474e4dd015bc07a25eb9080d upstream. atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so 32-bit arm need use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\<u64\>/long long/g" command. remove '__aligned(8)' which is useless for 64-bit. be sure of 80 column limitation after replacement. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: lpae: fix definition of PTE_HWTABLE_PTRSWill Deacon
commit e38a517578d6c0f764b0d0f6e26dcdf9f70c69d7 upstream. For 2-level page tables, PTE_HWTABLE_PTRS describes the offset between Linux PTEs and hardware PTEs. On LPAE, there is no distinction (since we have 64-bit descriptors with plenty of space) so PTE_HWTABLE_PTRS should be 0. Unfortunately, it is wrongly defined as PTRS_PER_PTE, meaning that current pte table flushing is off by a page. Luckily, all current LPAE implementations are SMP, so the hardware walker can snoop L1. This patch fixes the broken definition. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: fix type of PHYS_PFN_OFFSET to unsigned longCyril Chemparathy
commit 5b20c5b2f014ecc0a6310988af69cd7ede9e7c67 upstream. On LPAE machines, PHYS_OFFSET evaluates to a phys_addr_t and this type is inherited by the PHYS_PFN_OFFSET definition as well. Consequently, the kernel build emits warnings of the form: init/main.c: In function 'start_kernel': init/main.c:588:7: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat] This patch fixes this warning by pinning down the PFN type to unsigned long. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: LPAE: use phys_addr_t in alloc_init_pud()Vitaly Andrianov
commit 20d6956d8cd2452cec0889ff040f18afc03c2e6b upstream. This patch fixes the alloc_init_pud() function to use phys_addr_t instead of unsigned long when passing in the phys argument. This is an extension to commit 97092e0c56830457af0639f6bd904537a150ea4a (ARM: pgtable: use phys_addr_t for physical addresses), which applied similar changes elsewhere in the ARM memory management code. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: LPAE: use signed arithmetic for mask definitionsCyril Chemparathy
commit 926edcc747e2efb3c9add7ed4dbc4e7a3a959d02 upstream. This patch applies to PAGE_MASK, PMD_MASK, and PGDIR_MASK, where forcing unsigned long math truncates the mask at the 32-bits. This clearly does bad things on PAE systems. This patch fixes this problem by defining these masks as signed quantities. We then rely on sign extension to do the right thing. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: mm: correct pte_same behaviour for LPAE.Steve Capper
commit dde1b65110353517816bcbc58539463396202244 upstream. For 3 levels of paging the PTE_EXT_NG bit will be set for user address ptes that are written to a page table but not for ptes created with mk_pte. This can cause some comparison tests made by pte_same to fail spuriously and lead to other problems. To correct this behaviour, we mask off PTE_EXT_NG for any pte that is present before running the comparison. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tablesDouglas Anderson
commit 849b882b52df0f276d9ffded01d85654aa0da422 upstream. It appears that gcc may put some code in ".text.unlikely" or ".text.hot" sections. Right now those aren't accounted for in unwind tables. Add them. I found some docs about this at: http://gcc.gnu.org/onlinedocs/gcc-4.6.2/gcc.pdf Without this, if you have slub_debug turned on, you can get messages that look like this: unwind: Index not found 7f008c50 Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [wangkai: backport to 3.10 - adjust context ] Signed-off-by: Wang Kai <morgan.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-29crypto: prefix module autoloading with "crypto-"Kees Cook
commit 5d26a105b5a73e5635eae0629b42fa0a90e07b7b upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-29ARM: dts: imx25: Fix PWM "per" clocksFabio Estevam
commit 7ecd0bde5bfea524a843ad8fa8cb66ccbce68779 upstream. Currently PWM functionality is broken on mx25 due to the wrong assignment of the PWM "per" clock. According to Documentation/devicetree/bindings/clock/imx25-clock.txt: pwm_ipg_per 52 ,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock. With this change PWM can work fine on mx25. Reported-by: Carlos Soto <csotoalonso@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instancesGeert Uytterhoeven
commit b0ddb319db3d7a1943445f0de0a45c07a7f3457a upstream. The sh73a0 INTC can't mask interrupts properly most likely due to a hardware bug. Set the .control_parent flag to delegate masking to the parent interrupt controller, like was already done for irqpin1. Without this, accessing the three-axis digital accelerometer ADXL345 on kzm9g through /dev/input/event1 causes an interrupt storm, which requires a power-cycle to recover from. This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 341eb5465f67437a ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27ARM: omap5/dra7xx: Fix frequency typosLennart Sorensen
commit 572b24e6d85d98cdc552f07e9fb9870d9460d81b upstream. The switch statement of the possible list of SYSCLK1 frequencies is missing a 0 in 4 out of the 7 frequencies. Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter") Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27ARM: clk-imx6q: fix video divider for rev T0 1.0Gary Bisson
commit 81ef447950bf0955aca46f4a7617d8ce435cf0ce upstream. The post dividers do not work on i.MX6Q rev T0 1.0 so they must be fixed to 1. As the table index was wrong, a divider a of 4 could still be requested which implied the clock not to be set properly. This is the root cause of the HDMI not working at high resolution on rev T0 1.0 of the SoC. Signed-off-by: Gary Bisson <bisson.gary@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27ARM: imx6q: drop unnecessary semicolonDmitry Voytik
commit d2a10a1727b3948019128e83162f22c65859f1fd upstream. Drop unnecessary semicolon after closing curly bracket. Signed-off-by: Dmitry Voytik <voytikd@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27ARM: dts: imx25: Fix the SPI1 clocksFabio Estevam
commit 7a87e9cbc3a2f0ff0955815335e08c9862359130 upstream. From Documentation/devicetree/bindings/clock/imx25-clock.txt: cspi1_ipg 78 cspi2_ipg 79 cspi3_ipg 80 , so fix the SPI1 clocks accordingly to avoid a kernel hang when trying to access SPI1. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-16ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/375/38x/XPThomas Petazzoni
commit e55355453600a33bb5ca4f71f2d7214875f3b061 upstream. Enabling the hardware I/O coherency on Armada 370, Armada 375, Armada 38x and Armada XP requires a certain number of conditions: - On Armada 370, the cache policy must be set to write-allocate. - On Armada 375, 38x and XP, the cache policy must be set to write-allocate, the pages must be mapped with the shareable attribute, and the SMP bit must be set Currently, on Armada XP, when CONFIG_SMP is enabled, those conditions are met. However, when Armada XP is used in a !CONFIG_SMP kernel, none of these conditions are met. With Armada 370, the situation is worse: since the processor is single core, regardless of whether CONFIG_SMP or !CONFIG_SMP is used, the cache policy will be set to write-back by the kernel and not write-allocate. Since solving this problem turns out to be quite complicated, and we don't want to let users with a mainline kernel known to have infrequent but existing data corruptions, this commit proposes to simply disable hardware I/O coherency in situations where it is known not to work. And basically, the is_smp() function of the kernel tells us whether it is OK to enable hardware I/O coherency or not, so this commit slightly refactors the coherency_type() function to return COHERENCY_FABRIC_TYPE_NONE when is_smp() is false, or the appropriate type of the coherency fabric in the other case. Thanks to this, the I/O coherency fabric will no longer be used at all in !CONFIG_SMP configurations. It will continue to be used in CONFIG_SMP configurations on Armada XP, Armada 375 and Armada 38x (which are multiple cores processors), but will no longer be used on Armada 370 (which is a single core processor). In the process, it simplifies the implementation of the coherency_type() function, and adds a missing call to of_node_put(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: e60304f8cb7bb545e79fe62d9b9762460c254ec2 ("arm: mvebu: Add hardware I/O Coherency support") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1415871540-20302-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ARM: sched_clock: Load cycle count after epoch stabilizesStephen Boyd
commit 336ae1180df5f69b9e0fb6561bec01c5f64361cf upstream. There is a small race between when the cycle count is read from the hardware and when the epoch stabilizes. Consider this scenario: CPU0 CPU1 ---- ---- cyc = read_sched_clock() cyc_to_sched_clock() update_sched_clock() ... cd.epoch_cyc = cyc; epoch_cyc = cd.epoch_cyc; ... epoch_ns + cyc_to_ns((cyc - epoch_cyc) The cyc on cpu0 was read before the epoch changed. But we calculate the nanoseconds based on the new epoch by subtracting the new epoch from the old cycle count. Since epoch is most likely larger than the old cycle count we calculate a large number that will be converted to nanoseconds and added to epoch_ns, causing time to jump forward too much. Fix this problem by reading the hardware after the epoch has stabilized. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06ARM: 8222/1: mvebu: enable strex backoff delayThomas Petazzoni
commit 995ab5189d1d7264e79e665dfa032a19b3ac646e upstream. Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06ARM: 8216/1: xscale: correct auxiliary register in suspend/resumeDmitry Eremin-Solenikov
commit ef59a20ba375aeb97b3150a118318884743452a8 upstream. According to the manuals I have, XScale auxiliary register should be reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to also use c1, c0, 1. The issue was primarily noticed thanks to qemu reporing "unsupported instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255 XScale Core manuals and in PXA270 and PXA320 Developers Guides. Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21arch: mm: pass userspace fault flag to generic fault handlerJohannes Weiner
commit 759496ba6407c6994d6a5ce3a5e74937d7816208 upstream. Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: azurIt <azurit@pobox.sk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21arch: mm: do not invoke OOM killer on kernel fault OOMJohannes Weiner
commit 871341023c771ad233620b7a1fb3d9c7031c4e5c upstream. Kernel faults are expected to handle OOM conditions gracefully (gup, uaccess etc.), so they should never invoke the OOM killer. Reserve this for faults triggered in user context when it is the only option. Most architectures already do this, fix up the remaining few. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: azurIt <azurit@pobox.sk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21ARM: Correct BUG() assembly to ensure it is endian-agnosticBen Dooks
commit 63328070eff2f4fd730c86966a0dbc976147c39f upstream. Currently BUG() uses .word or .hword to create the necessary illegal instructions. However if we are building BE8 then these get swapped by the linker into different illegal instructions in the text. This means that the BUG() macro does not get trapped properly. Change to using <asm/opcodes.h> to provide the necessary ARM instruction building as we cannot rely on gcc/gas having the `.inst` instructions which where added to try and resolve this issue (reported by Dave Martin <Dave.Martin@arm.com>). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21ARM: probes: fix instruction fetch order with <asm/opcodes.h>Ben Dooks
commit 888be25402021a425da3e85e2d5a954d7509286e upstream. If we are running BE8, the data and instruction endianness do not match, so use <asm/opcodes.h> to correctly translate memory accesses into ARM instructions. Acked-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> [taras.kondratiuk@linaro.org: fixed Thumb instruction fetch order] Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> [wangnan: backport to 3.10 and 3.14: - adjust context - backport all changes on arch/arm/kernel/probes.c to arch/arm/kernel/kprobes-common.c since we don't have commit c18377c303787ded44b7decd7dee694db0f205e9. - After the above adjustments, becomes same to Taras Kondratiuk's original patch: http://lists.linaro.org/pipermail/linaro-kernel/2014-January/010346.html ] Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21ARM: 8198/1: make kuser helpers depend on MMUNathan Lynch
commit 08b964ff3c51b10aaf2e6ba639f40054c09f0f7a upstream. The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f5f41 (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Reported-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocksLudovic Desroches
commit cfa1950e6c6b72251e80adc736af3c3d2907ab0e upstream. When introducing support for sama5d3, the write to PMC_PCDR register has been accidentally removed. Reported-by: Nathalie Cyrille <nathalie.cyrille@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05arm: multi_v7_defconfig: Enable Zynq UART driverSoren Brinkmann
commit 90de827b9c238f8d8209bc7adc70190575514315 upstream. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 7748/1: oabi: handle faults when loading swi instruction from userspaceWill Deacon
commit 1aa2b3b7a6c4f3dbd3671171113a20e6a6190e3b upstream. Running an OABI_COMPAT kernel on an SMP platform can lead to fun and games with page aging. If one CPU issues a swi instruction immediately before another CPU decides to mkold the page containing the swi instruction, then we will fault attempting to load the instruction during the vector_swi handler in order to retrieve its immediate field. Since this fault is not currently dealt with by our exception tables, this results in a panic: Unable to handle kernel paging request at virtual address 4020841c pgd = c490c000 [4020841c] *pgd=84451831, *pte=bf05859d, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: hid_sony(O) CPU: 1 Tainted: G W O (3.4.0-perf-gf496dca-01162-gcbcc62b #1) PC is at vector_swi+0x28/0x88 LR is at 0x40208420 This patch wraps all of the swi instruction loads with the USER macro and provides a shared exception table entry which simply rewinds the saved user PC and returns from the system call (without setting tbl, so there's no worries with tracing or syscall restarting). Returning to userspace will re-enter the page fault handler, from where we will probably send SIGSEGV to the current task. Reported-by: Wang, Yalin <yalin.wang@sonymobile.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 8165/1: alignment: don't break misaligned NEON load/storeRobin Murphy
commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by: Simon Hosie <simon.hosie@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernelDave Martin
commit e2ccba49085ab5d71b092de2a5176eb9b19cc876 upstream. Copying a function with memcpy() and then trying to execute the result isn't trivially portable to Thumb. This patch modifies the kexec soft restart code to copy its assembler trampoline relocate_new_kernel() using fncpy() instead, so that relocate_new_kernel can be in the same ISA as the rest of the kernel without problems. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Tested-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Integrated-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 8133/1: use irq_set_affinity with force=false when migrating irqsSudeep Holla
commit a040803a9d6b8c1876d3487a5cb69602ebcbb82c upstream. Since commit 1dbfa187dad ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f01d8 ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de64012 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 8128/1: abort: don't clear the exclusive monitorsMark Rutland
commit 85868313177700d20644263a782351262d2aff84 upstream. The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d0084 ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-30 21:30:38 +0000