summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2014-10-31ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocksLudovic Desroches
commit cfa1950e6c6b72251e80adc736af3c3d2907ab0e upstream. When introducing support for sama5d3, the write to PMC_PCDR register has been accidentally removed. Reported-by: Nathalie Cyrille <nathalie.cyrille@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-31ARM: at91: fix at91sam9263ek DT mmc pinmuxing settingsAndreas Henriksson
commit b65e0fb3d046cc65d0a3c45d43de351fb363271b upstream. As discovered on a custom board similar to at91sam9263ek and basing its devicetree on that one apparently the pin muxing doesn't get set up properly. This was discovered since the custom boards u-boot does funky stuff with the pin muxing and leaved it set to SPI which made the MMC driver not work under Linux. The fix is simply to define the given configuration as the default. This probably worked by pure luck before, but it's better to make the muxing explicitly set. Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variantsRajendra Nayak
commit af438fec6cb99fc2e2faf8b16b865af26ce722e6 upstream. Use the corresponding compatibles to identify the devices. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: 8165/1: alignment: don't break misaligned NEON load/storeRobin Murphy
commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by: Simon Hosie <simon.hosie@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: 8148/1: flush TLS and thumbee register state during execNathan Lynch
commit fbfb872f5f417cea48760c535e0ff027c88b507a upstream. The TPIDRURO and TPIDRURW registers need to be flushed during exec; otherwise TLS information is potentially leaked. TPIDRURO in particular needs careful treatment. Since flush_thread basically needs the same code used to set the TLS in arm_syscall, pull that into a common set_tls helper in tls.h and use it in both places. Similarly, TEEHBR needs to be cleared during exec as well. Clearing its save slot in thread_info isn't right as there is no guarantee that a thread switch will occur before the new program runs. Just setting the register directly is sufficient. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: 8133/1: use irq_set_affinity with force=false when migrating irqsSudeep Holla
commit a040803a9d6b8c1876d3487a5cb69602ebcbb82c upstream. Since commit 1dbfa187dad ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f01d8 ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de64012 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: 8128/1: abort: don't clear the exclusive monitorsMark Rutland
commit 85868313177700d20644263a782351262d2aff84 upstream. The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d0084 ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-01ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernelDave Martin
commit e2ccba49085ab5d71b092de2a5176eb9b19cc876 upstream. Copying a function with memcpy() and then trying to execute the result isn't trivially portable to Thumb. This patch modifies the kexec soft restart code to copy its assembler trampoline relocate_new_kernel() using fncpy() instead, so that relocate_new_kernel can be in the same ISA as the rest of the kernel without problems. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Tested-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-09-03ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.Jeremy Vial
commit 9b5f7428f8b16bd8980213f2b70baf1dd0b9e36c upstream. According to the comment “restore_es3: applies to 34xx >= ES3.0" in "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used if the revision of an OMAP34xx is ES3.1.2. Signed-off-by: Jeremy Vial <jvial@adeneo-embedded.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-08-19ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layoutKonstantin Khlebnikov
commit 811a2407a3cf7bbd027fbe92d73416f17485a3d8 upstream. On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2 (pmd) entries map 2MiB. When the identity mapping is created on LPAE, the pgd pointers are copied from the swapper_pg_dir. If we find that we need to modify the contents of a pmd, we allocate a new empty pmd table and insert it into the appropriate 1GB slot, before then filling it with the identity mapping. However, if the 1GB slot covers the kernel lowmem mappings, we obliterate those mappings. When replacing a PMD, first copy the old PMD contents to the new PMD, so that we preserve the existing mappings, particularly the mappings of the kernel itself. [rewrote commit message and added code comment -- rmk] Fixes: ae2de101739c ("ARM: LPAE: Add identity mapping support for the 3-level page table format") Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ARM: dts: imx: Add alias for ethernet controllerMarek Vasut
commit 22970070e027cbbb9b2878f8f7c31d0d7f29e94d upstream. Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29locking/mutex: Disable optimistic spinning on some architecturesPeter Zijlstra
commit 4badad352a6bb202ec68afa7a574c0bb961e5ebc upstream. The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jason Low <jason.low2@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: John David Anglin <dave.anglin@bell.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-18ARM: OMAP2+: Fix parser-bug in platform muxing codeDavid R. Piegdon
commit c021f241f4fab2bb4fc4120a38a828a03dd3f970 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon <lkml@p23q.org> Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02ARM: 8037/1: mm: support big-endian page tablesJianguo Wu
commit 86f40622af7329375e38f282f6c0aab95f3e5f72 upstream. When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02ARM: stacktrace: avoid listing stacktrace functions in stacktraceRussell King
commit 3683f44c42e991d313dc301504ee0fca1aeb8580 upstream. While debugging the FEC ethernet driver using stacktrace, it was noticed that the stacktraces always begin as follows: [<c00117b4>] save_stack_trace_tsk+0x0/0x98 [<c0011870>] save_stack_trace+0x24/0x28 ... This is because the stack trace code includes the stack frames for itself. This is incorrect behaviour, and also leads to "skip" doing the wrong thing (which is the number of stack frames to avoid recording.) Perversely, it does the right thing when passed a non-current thread. Fix this by ensuring that we have a known constant number of frames above the main stack trace function, and always skip these. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02hugetlb: restrict hugepage_migration_support() to x86_64Naoya Horiguchi
commit c177c81e09e517bbf75b67762cdab1b83aba6976 upstream. Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAPPaul Bolle
commit 77c2f02edbeda9409a7cf3fd66233015820c213a upstream. Commit 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built") apparently required that checks for CONFIG_USB_GADGET_OMAP would be replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining checks for CONFIG_USB_GADGET_OMAP, even though these checks have basically been broken since v3.1. And, since we're touching this code, use the IS_ENABLED() macro, so things will now (hopefully) also work if USB_OMAP is modular. Fixes: 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built") Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23ARM: at91: fix at91_sysirq_mask_rtc for sam9x5 SoCsBoris BREZILLON
commit 9dcc87fec8947308e0111c65dcd881e6aa5b1673 upstream. sam9x5 SoCs have the following errata: "RTC: Interrupt Mask Register cannot be used Interrupt Mask Register read always returns 0." Hence we should not rely on what IMR claims about already masked IRQs and just disable all IRQs. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Bryan Evenson <bevenson@melinkcorp.com> Reviewed-by: Johan Hovold <johan@hovold.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Roszko <mark.roszko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: 8064/1: fix v7-M signal returnRabin Vincent
commit 483a6c9d447f625b991fa04a1530493d893984db upstream. According to the ARM ARM, the behaviour is UNPREDICTABLE if the PC read from the exception return stack is not half word aligned. See the pseudo code for ExceptionReturn() and PopStack(). The signal handler's address has the bit 0 set, and setup_return() directly writes this to regs->ARM_pc. Current hardware happens to discard this bit, but QEMU's emulation doesn't and this makes processes crash. Mask out bit 0 before the exception return in order to get predictable behaviour. Fixes: 19c4d593f0b4 ("ARM: ARMv7-M: Add support for exception handling") Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: 8051/1: put_user: fix possible data corruption in put_userAndrey Ryabinin
commit 537094b64b229bf3ad146042f83e74cf6abe59df upstream. According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on ↵Laurent Pinchart
all OMAP3 platforms commit 98d7e1aee6dd534f468993f8c6a1bc730d4cfa81 upstream. Commit 7b2e1277598e4187c9be3e61fd9b0f0423f97986 ("ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5") enabled clock rate back-propagation from cam_mclk do dpll4_m5 on OMAP3630 only. Perform back-propagation on other OMAP3 platforms as well. Reported-by: Jean-Philippe François <jp.francois@cynove.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: omap5: hwmod_data: Correct IDLEMODE for McPDMPeter Ujfalusi
commit 0f9e19ad88eee820f517b85531b555a0fa73e7e4 upstream. McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: imx: fix error handling in ipu device registrationEmil Goode
commit d1d70e5dc2cfa9047bb935c41ba808ebb8135696 upstream. If we fail to allocate struct platform_device pdev we dereference it after the goto label err. This bug was found using coccinelle. Fixes: afa77ef (ARM: mx3: dynamically allocate "ipu-core" devices) Signed-off-by: Emil Goode <emilgoode@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: perf: hook up perf_sample_event_took around pmu irq handlingWill Deacon
commit 5f5092e72cc25a6a5785308270e0085b2b2772cc upstream. Since we indirect all of our PMU IRQ handling through a dispatcher, it's trivial to hook up perf_sample_event_took to prevent applications such as oprofile from generating interrupt storms due to an unrealisticly low sample period. Reported-by: Robert Richter <rric@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddrLiu Hua
commit 8fad87bca7ac9737e413ba5f1656f1114a8c314d upstream. When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will overflow if pfn >= 0x100000 in copy_oldmem_page. So use __pfn_to_phys for converting. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09arm: dts: Fix missing device_type="memory" for ste-ccu8540Leif Lindholm
commit bfaed5abad998bfc88a66e6e71c7b08dcf82f04e upstream. The current .dts for ste-ccu8540 lacks a 'device_type = "memory"' for its memory node, relying on an old ppc quirk in order to discover its memory. Fix the data so that all parsing code can handle it correctly. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device TreeThomas Petazzoni
commit 6e20bae8a39c40d4e03698e4160bad2d2629062b upstream. The mvebu-devbus driver had a serious bug, which lead to a 8 bits bus width declared in the Device Tree being considered as a 16 bits bus width when configuring the hardware. This bug in mvebu-devbus driver was compensated by a symetric mistake in the Armada XP OpenBlocks AX3 Device Tree: a 8 bits bus width was declared, even though the hardware actually has a 16 bits bus width connection with the NOR flash. Now that we have fixed the mvebu-devbus driver to behave according to its Device Tree binding, this commit fixes the problematic Device Tree files as well. This bug was introduced in commit a7d4f81821f7eec3175f8e23dd6949c71ab2da43 ('ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board') which was merged in v3.10. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397489361-5833-5-git-send-email-thomas.petazzoni@free-electrons.com Fixes: a7d4f81821f7 ('ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board') Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: mvebu: fix NOR bus-width in Armada XP DB Device TreeThomas Petazzoni
commit f3aec8f3f05025e7b450102dae0759375346706e upstream. The mvebu-devbus driver had a serious bug, which lead to a 8 bits bus width declared in the Device Tree being considered as a 16 bits bus width when configuring the hardware. This bug in mvebu-devbus driver was compensated by a symetric mistake in the Armada XP DB Device Tree: a 8 bits bus width was declared, even though the hardware actually has a 16 bits bus width connection with the NOR flash. Now that we have fixed the mvebu-devbus driver to behave according to its Device Tree binding, this commit fixes the problematic Device Tree files as well. This bug was introduced in commit b484ff42df475c5087d614c4d477273e1906bcb9 ('ARM: mvebu: Add support for NOR flash device on Armada XP-DB board') which was merged in v3.11. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397489361-5833-4-git-send-email-thomas.petazzoni@free-electrons.com Fixes: b484ff42df47 ('ARM: mvebu: Add support for NOR flash device on Armada XP-DB board') Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: mvebu: fix NOR bus-width in Armada XP GP Device TreeThomas Petazzoni
commit 1a88f809ccb5db1509a7514b187c00b3a995fc82 upstream. The mvebu-devbus driver had a serious bug, which lead to a 8 bits bus width declared in the Device Tree being considered as a 16 bits bus width when configuring the hardware. This bug in mvebu-devbus driver was compensated by a symetric mistake in the Armada XP GP Device Tree: a 8 bits bus width was declared, even though the hardware actually has a 16 bits bus width connection with the NOR flash. Now that we have fixed the mvebu-devbus driver to behave according to its Device Tree binding, this commit fixes the problematic Device Tree files as well. This bug was introduced in commit da8d1b38356853c37116f9afa29f15648d7fb159 ('ARM: mvebu: Add support for NOR flash device on Armada XP-GP board') which was merged in v3.10. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397489361-5833-3-git-send-email-thomas.petazzoni@free-electrons.com Fixes: da8d1b383568 ('ARM: mvebu: Add support for NOR flash device on Armada XP-GP board') Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: dts: i.MX53: Fix ipu register space sizeSascha Hauer
commit 6d66da89bf4422c0a0693627fb3e25f74af50f92 upstream. The IPU register space is 128MB, not 2GB. Fixes: abed9a6bf2bb 'ARM i.MX53: Add IPU support' Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: dts: kirkwood: fix mislocated pcie-controller nodesSebastian Hesselbarth
commit 788296b2d19d16ec33aba0a5ad1544d50bb58601 upstream. Commit 54397d85349f ("ARM: kirkwood: Relocate PCIe device tree nodes") moved the pcie-controller nodes for the Kirkwood SoCs to the mbus bus node. For some reason, two boards were not properly converted and have their pci-controller nodes still in the ocp bus node. As the corresponding SoC pcie-controller does not exist anymore, it is likely that pcie is broken on those boards since above commit. Fix it by moving the pcie related nodes to the correct location. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Fixes: 54397d85349f ("ARM: kirkwood: Relocate PCIe device tree nodes") Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09ARM: orion5x: fix target ID for crypto SRAM windowThomas Petazzoni
commit 1cc9d48145b81e307fab94a5cf6ee66ec2f0de60 upstream. In commit 4ca2c04085a1caa903e92a5fc0da25362150aac2 ('ARM: orion5x: Move to ID based window creation'), the mach-orion5x code was changed to use the new mvebu-mbus API. However, in the process, a mistake was made on the crypto SRAM window target ID: it should have been 0x9 (verified in the datasheet) and not 0x0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1397400006-4315-2-git-send-email-thomas.petazzoni@free-electrons.com Fixes: 4ca2c04085a1 ('ARM: orion5x: Move to ID based window creation') Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15arm: KVM: fix possible misalignment of PGDs and bounce pageMark Salter
commit 5d4e08c45a6cf8f1ab3c7fa375007635ac569165 upstream. The kvm/mmu code shared by arm and arm64 uses kalloc() to allocate a bounce page (if hypervisor init code crosses page boundary) and hypervisor PGDs. The problem is that kalloc() does not guarantee the proper alignment. In the case of the bounce page, the page sized buffer allocated may also cross a page boundary negating the purpose and leading to a hang during kvm initialization. Likewise the PGDs allocated may not meet the minimum alignment requirements of the underlying MMU. This patch uses __get_free_page() to guarantee the worst case alignment needs of the bounce page and PGDs on both arm and arm64. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: dts: am335x: update USB DT referencesLeigh Brown
commit a2f8d6b303213a98436455aece7e14cdd1240629 upstream. In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XPThomas Petazzoni
commit a6e03dd451c724f785277d8ecca5d1a0b886d892 upstream. The mvmdio driver accesses some register of the Ethernet unit. It therefore takes a reference and enables a clock. However, on Armada 370/XP, no clock specification was given in the Device Tree, which leads the mvmdio driver to fail when being used as a module and loaded before the mvneta driver: it tries to access a register from a hardware unit that isn't clocked. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1395790439-21332-2-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfoLiu Hua
commit 56b700fd6f1e49149880fb1b6ffee0dca5be45fb upstream. For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: 8027/1: fix do_div() bug in big-endian systemsXiangyu Lu
commit 80bb3ef109ff40a7593d9481c17de9bbc4d7c0e2 upstream. In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Alex Wu <wuquanming@huawei.com> Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: 8007/1: Remove extraneous kcmp syscall ignoreChristopher Covington
commit 95c52fe063351192e0f4ffb70ef9bac1aa26f5a4 upstream. The kcmp system call was ported to ARM in commit 3f7d1fe108dbaefd0c57a41753fc2c90b395f458 "ARM: 7665/1: Wire up kcmp syscall". Fixes: 3f7d1fe108db ("ARM: 7665/1: Wire up kcmp syscall") Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: Fix default CPU selection for ARCH_MULTI_V5Andrew Lunn
commit 12567bbdee7ea553237085a2bbc0ffa5240f5248 upstream. CPU_ARM926T should be selected if no other CPU is. Put the ! in the right place so this works. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Fixes: 24e860fbfdb1c ("ARM: multiplatform: always pick one CPU type") Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: 7954/1: mm: remove remaining domain support from ARMv6Will Deacon
commit b6ccb9803e90c16b212cf4ed62913a7591e79a39 upstream. CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: dts: Keep G3D regulator always on for exynos5250-arndaleTomasz Figa
commit bfeda827278f09f4db35877e5f1ca9c149ca2890 upstream. Apparently, if G3D regulator is powered off, the SoC cannot enter low power modes and just hangs. This patch fixes this by keeping the regulator always on when the system is running, as suggested by Exynos 4 User's Manual in case of Exynos4210/4x12 SoCs (Exynos5250 UM does not have such note, but observed behavior seems to confirm that it is true for this SoC as well). This fixes an issue preventing Arndale board from entering sleep mode observed since commit 346f372f7b72a0 clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock that landed in kernel 3.10, which has fixed the clock driver to make the SoC actually try to enter the sleep mode. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: dts: am33xx: correcting dt node unit address for usbMugunthan V N
commit 8abcdd680d543fb582371e146e62ba9f2af8a816 upstream. DT node's unit address should be its own register offset address to make it a unique across the system. This patch corrects the incorrect USB entries with correct register offset for unit address. Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP3: hwmod data: Correct clock domains for USB modulesRoger Quadros
commit c6c56697ae4bf1226263c19e8353343d7083f40e upstream. OMAP3 doesn't contain "l3_init_clkdm" clock domain. Use the proper clock domains for USB Host and USB TLL modules. Gets rid of the following warnings during boot omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm Reported-by: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Fixes: de231388cb80a8ef3e779bbfa0564ba0157b7377 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Partha Basak <parthab@india.ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUMNishanth Menon
commit 07484ca33ef83900f5cfbde075c1a19e5a237aa1 upstream. Just like IS_PM34XX_ERRATUM, IS_PM44XX_ERRATUM is valid only if CONFIG_PM is enabled, else, disabling CONFIG_PM results in build failure complaining about the following: arch/arm/mach-omap2/built-in.o: In function `omap4_boot_secondary': :(.text+0x8a70): undefined reference to `pm44xx_errata' Fixes: c962184 (ARM: OMAP4: PM: add errata support) Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.ocm> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP2+: INTC: Acknowledge stuck active interruptsStefan Sørensen
commit 698b48532539484b012fb7c4176b959d32a17d00 upstream. When an interrupt has become active on the INTC it will stay active until it is acked, even if masked or de-asserted. The INTC_PENDING_IRQn registers are however updated and since these are used by omap_intc_handle_irq to determine which interrupt to handle, it will never see the active interrupt. This will result in a storm of useless interrupts that is only stopped when another higher priority interrupt is asserted. Fix by sending the INTC an acknowledge if we find no interrupts to handle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-05ARM: 7840/1: LPAE: don't reject mapping /dev/mem above 4GBSergey Dyasly
commit 3159f372354e8e1f5dee714663d705dd2c7e0759 upstream. With LPAE enabled, physical address space is larger than 4GB. Allow mapping any part of it via /dev/mem by using PHYS_MASK to determine valid range. PHYS_MASK covers 40 bits with LPAE enabled and 32 bits otherwise. Reported-by: Vassili Karpov <av1474@comtv.ru> Signed-off-by: Sergey Dyasly <dserrg@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-31ARM: tegra: only run PL310 init on systems with oneStephen Warren
commit 8859685785bfafadf9bc922dd3a2278e59886947 upstream. Fix tegra_init_cache() to check whether the system has a PL310 cache before touching the PL310 registers. This prevents access to non-existent registers on Tegra114 and later. Note for stable kernels: In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-26ARM: ignore memory below PHYS_OFFSETRussell King
commit 571b14375019c3a66ef70d4d4a7083f4238aca30 upstream. If the kernel is loaded higher in physical memory than normal, and we calculate PHYS_OFFSET higher than the start of RAM, this leads to boot problems as we attempt to map part of this RAM into userspace. Rather than struggle with this, just truncate the mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-26ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_tMagnus Damm
commit 6d7d5da7d75c6df676c8b72d32b02ff024438f0c upstream. Use CONFIG_ARCH_PHYS_ADDR_T_64BIT to determine if ignoring or truncating of memory banks is neccessary. This may be needed in the case of 64-bit memory bank addresses but when phys_addr_t is kept 32-bit. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-26ARM: 7950/1: mm: Fix stage-2 device memory attributesChristoffer Dall
commit 4d9c5b89cf3605bbc39c6e274351ff25f0d83e6a upstream. The stage-2 memory attributes are distinct from the Hyp memory attributes and the Stage-1 memory attributes. We were using the stage-1 memory attributes for stage-2 mappings causing device mappings to be mapped as normal memory. Add the S2 equivalent defines for memory attributes and fix the comments explaining the defines while at it. Add a prot_pte_s2 field to the mem_type struct and fill out the field for device mappings accordingly. Cc: <stable@vger.kernel.org> [3.12] Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 12:35:27 +0000