| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
"These are various bug fixes that were not considered important enough
for merging into 3.10.
The majority of the ARM fixes are for the OMAP and at91 platforms, and
there is another set of bug fixes for device drivers that resolve
'randconfig' build errors and that the subsystem maintainers either
did not pick up or preferred to get merged through the arm-soc tree."
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
ARM: at91/PMC: fix at91sam9n12 USB FS init
ARM: at91/PMC: at91sam9n12 family has a PLLB
ARM: at91/PMC: sama5d3 family doesn't have a PLLB
ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
ARM: mxs: don't select HAVE_PWM
ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
cpuidle: calxeda: select ARM_CPU_SUSPEND
ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
ARM: at91: cpuidle: Fix target_residency
ARM: at91: fix at91_extern_irq usage for non-dt boards
ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
X.509: do not emit any informational output
mtd: omap2: allow bulding as a module
[SCSI] nsp32: use mdelay instead of large udelay constants
hwrng: bcm2835: fix MODULE_LICENSE tag
ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
ARM: at91: Fix link breakage when !CONFIG_PHYLIB
MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB 3.11-rc1 merge request.
Lots of gadget and finally, chipidea driver updates (they were much
needed), along with a new host controller driver, lots of little
serial driver fixes, the removal of the 255 usb-serial device
limitation, and a variety of other minor things.
All of these have been in the linux-next releases for a while"
* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
usb: musb: omap2430: make it compile again
usb: chipidea: ci_hdrc_imx: access phy via private data
xhci: Add missing unlocks on error paths
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
ehci-atmel.c: prepare clk before calling enable
USB: ohci-at91: prepare clk before calling enable
USB: HWA: fix device probe failure
wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
wusbcore: add sysfs attribute for retry count
wusbcore: add sysfs attribute for DNTS count and interval
usb: chipidea: drop "13xxx" infix
usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
usb: host: xhci-plat: release mem region while removing module
usbmisc_imx: allow autoloading on according to dt ids
usb: fix build error without CONFIG_USB_PHY
usb: check usb_hub_to_struct_hub() return value
xhci: check for failed dma pool allocation
usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
|
|
Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.
Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.
Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
next/fixes-non-critical
From Nicolas Ferre:
Several fixes for:
- external irq on non-DT boards
- cpuidle code in some circumstances
- PMC code in relation with PLLB/PLL_UTMI/USB:
mainly for SAMA5D3 and AT91SAM9N12
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
ARM: at91/PMC: fix at91sam9n12 USB FS init
ARM: at91/PMC: at91sam9n12 family has a PLLB
ARM: at91/PMC: sama5d3 family doesn't have a PLLB
ARM: at91: cpuidle: Fix target_residency
ARM: at91: fix at91_extern_irq usage for non-dt boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We are using this function, now that we have introduced
the support for UTMI clock for computing the USB host rate.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
|
|
at91sam9n12 has Full-speed only USB. So we should add
it to the list in at91_pllb_usbfs_clock_init() function.
Moreover, at91sam9n12 has an unusual PMC in the sense that it
has a PLLB but also has a USB clock register.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
|
|
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
|
|
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
tegra_pmc_parse_dt() references __initconst data. Fix it to be __init.
This matches its only usage; a call from tegra_pmc_init() which is
already __init. This fixes:
WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference
from the function tegra_pmc_parse_dt() to the (unknown reference)
.init.rodata:(unknown)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
into next/fixes-non-critical
From Jason Cooper:
- mv78260: catch missing fix for mvneta register length
* tag 'fixes-non-3.11-2' of git://git.infradead.org/users/jcooper/linux:
ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
We want the USB fixes and other good stuff in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the firmware merge fixes, and other bits, in here now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HAVE_PWM symbol is only for legacy platforms that provide
the PWM API without using the generic framework. MXS actually
uses that framework, and selecting the symbol anyway might
cause build errors like
drivers/built-in.o: In function `pwm_beeper_resume':
:(.text+0x1f4fc0): undefined reference to `pwm_config'
:(.text+0x1f4fc8): undefined reference to `pwm_enable'
drivers/built-in.o: In function `pwm_beeper_suspend':
:(.text+0x1f4ffc): undefined reference to `pwm_disable'
when CONFIG_PWM is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
|
|
When building a kernel without CONFIG_PM, we get a link
error from referencing mxs_pm_init in the machine
descriptor. This defines a macro to NULL for that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
|
|
This commit fixes the regression on Armada 370 (the kernal hang during
boot) introduced by the commit: "ARM: 7691/1: mm: kill unused
TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead".
When coming out of either a Wait for Interrupt (WFI) or a Wait for
Event (WFE) IDLE states, a specific timing sensitivity exists between
the retiring WFI/WFE instructions and the newly issued subsequent
instructions. This sensitivity can result in a CPU hang scenario. The
workaround is to insert either a Data Synchronization Barrier (DSB) or
Data Memory Barrier (DMB) command immediately after the WFI/WFE
instruction.
This commit was based on the work of Lior Amsalem, but heavily
modified to apply the errata fix dynamically according to the
processor type thanks to the suggestions of Russell King and Nicolas
Pitre.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> # 3.2+: 1bc3974: ARM: 7755/1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The __cpu_logical_map array is statically initialized to 0, which is a valid
MPIDR value. To prevent issues with the current implementation, this patch
defines an MPIDR_INVALID value, and statically initializes the
__cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps()
tmp_map array used to stash DT reg properties while parsing DT are initialized
with the MPIDR_INVALID value as well for consistency.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The introduction of the cpu-map topology node in the cpus node implies
that cpus node might have children that are not cpu nodes. The DT
parsing code needs updating otherwise it would check for cpu nodes
properties in nodes that are not required to contain them, resulting
in warnings that have no bearing on bindings defined in the dts source file.
Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
As it was already suggested by Russell King and Arnd Bergmann:
https://lkml.org/lkml/2013/5/16/133
moxart and gemini seem to be the only platforms using CPU_FA526,
and instead of pointing arm_pm_idle to an empty function from
platform code, it makes sense to remove WFI code from the processor
specific idle function.
Applies to arm-soc/for-next (and 3.10-rc1).
Changes since v1:
1. remove WFI but make sure cpu_fa526_do_idle do not fall through
to cpu_fa526_dcache_clean_area
Note: moxart boots and prints to UART without this patch, but input is broken.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The length of the registers area for the Marvell 370/XP Ethernet controller
was incorrect in the .dtsi: 0x2500, while it should have been 0x4000.
This problem wasn't noticed because there used to be a static mapping for
all the MMIO register region set up by ->map_io().
The register length was fixed in all the other device tree files,
except from the armada-xp-mv78260.dtsi, in the following commit:
commit cf8088c5cac6ce20d914b9131533844b9291a054
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue May 21 12:33:27 2013 +0200
arm: mvebu: fix length of Ethernet registers area in .dtsi
This commit fixes a kernel panic in mvneta_probe(), when the kernel
tries to access the unmapped registers:
[ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e
[ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef
[ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c
[ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0
[ 163.668523] pgd = c0004000
[ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000
[ 163.677565] Internal error: Oops: 807 [#1] SMP ARM
[ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11
[ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000
[ 163.695467] PC is at mvneta_probe+0x34c/0xabc
[...]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are two fixes that came in this week, one for a regression we
introduced in 3.10 in the GIC interrupt code, and the other one fixes
a typo in newly introduced code"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
|
|
The following commit:
commit 7e348b9012522fa0efd854d20d210d5e57fcedd1
Author: Robert Lee <rob.lee@linaro.org>
Date: Tue Mar 20 15:22:43 2012 -0500
ARM: at91: Consolidate time keeping and irq enable
Enable core cpuidle timekeeping and irq enabling and remove that
handling from this code.
introduced an additional zero to the state1 (suspend) target residency.
With a periodic tick, the cpu never enters the state1 with both 10000 and
100000.
With a tickless system, it enters to state1 much more often with the
initial value, roughly x7 more.
Fix it by setting the value to 10ms again.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[nicola.ferre@atmel.com: add precisions given by Daniel to commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Since 4b68520dc0ec96153bc0d87bca5ffba508edfcf
ARM: at91: add AIC5 support
we allocate the at91_extern_irq.
This patch makes it static and stores the non-dt extern irq in the soc
structure. It is then possible to use a at91_get_extern_irq() function
to get the value for outside of the irq driver. It is useful for passing
its value to at91_aic_init().
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: rework commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
next/fixes-non-critical
From Nicolas Ferre:
Two non critical fixes that can go in 3.11.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
ARM: at91: Fix link breakage when !CONFIG_PHYLIB
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I got a build error today that made me realize that it is not
possible to build a kernel for a SiRF platform without enabling
CONFIG_PRIMA2, since a lot of common code depends on CONFIG_PRIMA2.
This fixes all occurences that appear like common SiRF code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
|
|
Pull ARM fixes from Russell King:
"The larger changes this time are
- "ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page"
which fixes more data corruption problems with O_DIRECT
- "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" which
gets us back to working shutdown/reboot on SMP platforms
- "ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect"
which fixes a shutdown regression found in v3.10 on Versatile
Express platforms.
The remainder are the quite small, maybe one or two line changes"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7759/1: decouple CPU offlining from reboot/shutdown
ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B
ARM: 7753/1: map_init_section flushes incorrect pmd
ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect
|
|
Because MT_DEVICE is not executable in armv7, we change
the internal SRAM memory type to MT_MEMORY_NONCACHED.
As it seems that caching this internal SRAM memory is not necessary,
we chose the this memory type.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Fixes:
arch/arm/mach-at91/built-in.o: In function `ksz9021rn_phy_fixup':
:(.text+0x1174): undefined reference to `mdiobus_write'
:(.text+0x1188): undefined reference to `mdiobus_write'
:(.text+0x119c): undefined reference to `mdiobus_write'
:(.text+0x11b0): undefined reference to `mdiobus_write'
arch/arm/mach-at91/built-in.o: In function `sama5_dt_device_init':
:(.init.text+0x1e34): undefined reference to `phy_register_fixup_for_uid'
when CONFIG_PHYLIB is not selected.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
We want these fixes here too.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add comments to machine_shutdown()/halt()/power_off()/restart() that
describe their purpose and/or requirements re: CPUs being active/not.
In machine_shutdown(), replace the call to smp_send_stop() with a call to
disable_nonboot_cpus(). This completely disables all but one CPU, thus
satisfying the requirement that only a single CPU be active for kexec.
Adjust Kconfig dependencies for this change.
In machine_halt()/power_off()/restart(), call smp_send_stop() directly,
rather than via machine_shutdown(); these functions don't need to
completely de-activate all CPUs using hotplug, but rather just quiesce
them.
Remove smp_kill_cpus(), and its call from smp_send_stop().
smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling
smp_ops.cpu_die() on the target CPUs first. At least some implementations
of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra,
for example. Since smp_send_stop() is only used for shutdown, halt, and
power-off, there is no need to attempt any kind of CPU hotplug here.
Adjust Kconfig to reflect that machine_shutdown() (and hence kexec)
relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee
that hotplug will work, or even that hotplug is implemented for a
particular piece of HW that a multi-platform zImage runs on. Hence, add
error-checking to machine_kexec() to determine whether it did work.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Zhangfei Gao <zhangfei.gao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
We want the fixes in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch corrects the base address of pinctrl_3 on Exynos5250
platform.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Make sure hyp-stub.S gets removed during make distclean,
this left over file was introduced in commit:
424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only. However, for
example when doing direct I/O, pages with user space mappings may
occur.
Thus, continue to do lazy flushing if there are no user space
mappings. Otherwise, flush the kernel cache lines directly.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This commit fixes the ID and mask for the PJ4B which was too
restrictive and didn't match the CPU of the Armada 370 SoC.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This bug was introduced in commit e651eab0.
Some v4/v5 platforms failed to boot due to this.
Signed-off-by: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR
register returns zero when it should return one. This leads to cache
maintenance operations which rely on this value to not function as
intended, causing data corruption.
The workaround for this errata is to detect affected CPUs and correct
the LoUIS value read.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"These are a little later than I planned on since I got caught up with
handling merges for 3.11 most of the week.
Another week, another batch of fixes for arm-soc platforms.
Again, nothing controversial. A few more than would be ideal, but all
are valid fixes. In particular the prima2 panic patch is critical
since it fixes a problem where multiplatform kernels panic on all but
prima2 hardware."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms
ARM: prima2: fix incorrect panic usage
arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range
ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant().
ARM: omap3: clock: fix wrong container_of in clock36xx.c
ARM: dts: OMAP5: Fix missing PWM capability to timer nodes
ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line
ARM: dts: AM33xx: Fix properties on gpmc node
arm: omap2: fix AM33xx hwmod infos for UART2
ARM: OMAP3: Fix iva2_pwrdm settings for 3703
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/fixes-non-critical
From David Brown:
Some minor fixes for MSM for 3.11
I don't expect these to be necessary for stable, since the fixes are
to recently added code. The strncpy fix is only in debug code that
isn't normally compiled or used (and is being removed in upcoming
patches).
* tag 'msm-fix-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
gpio: msm-v1: Remove errant __devinit to fix compile
mfd: ssbi: Add MODULE_DEVICE_TABLE
ARM: dts: msm: Fix bad register addresses
arch: arm: mach-msm: using strlcpy instead of strncpy
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/fixes-non-critical
From Sekhar Nori:
This pull request contains a trival change
to drop a stale maintainer name and address.
* tag 'davinci-for-v3.11/board' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: remove stale SFFSDR maintainer name
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
From Tony Lindgren:
Non-critical fixes for omaps for v3.11 merge window.
* tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap-usb-host: Fix memory leaks
ARM: OMAP2+: Fix serial init for device tree based booting
arm/omap: use const char properly
ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when DMIC hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when McPDM hwmod lookup fails
ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0
ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0
ARM: OMAP: fix dsi regulator names
+ Linux 3.10-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The maintainer entry for SFFSDR board contained in the
board file is stale (not working). Remove it.
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v3.11 merge window
All function drivers are now converted to our new configfs-based
binding. Eventually this will help us getting rid of in-kernel
gadget drivers and only keep function drivers in the kernel.
MUSB was taught that it needs to be built for host-only and
device-only modes too. We had this support long ago but it
involved a ridiculous amount of ifdefs. Now we have a much
cleaner approach.
Samsung Exynos4 platform now implements HSIC support.
We're introducing support for AB8540 and AB9540 PHYs.
MUSB module reinsertion now works as expected, before we were
getting -EBUSY being returned by the resource checks done on
driver core.
DWC3 now has minimum support for TI's AM437x series of SoCs.
OMAP5 USB3 PHY learned one extra DPLL configuration values because
that PHY is reused in TI's DRA7xx devices.
We're introducing support for Faraday fotg210 UDCs.
Last, but not least, the usual set of non-critical fixes and cleanups
ranging from usage of platform_{get,set}_drvdata to lock improvements.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
Fix memory leaks in the error path.
Also, use platform_device_register_full() to allocate
the platform devices and set platform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We don't want to call omap_serial_early_init() for device
tree based booting as the ports are initialized based on
the .dts entries.
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The itention was probably to make both pointers const but as it is now,
it is just const used twice.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The dss_hdmi hwmod is used to create the HDMI audio device for OMAP4+
When we boot the kernel we can silently ignore the failure since the IP
does not exist on them.
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
