summaryrefslogtreecommitdiff
path: root/arch/c6x/platforms
AgeCommit message (Collapse)Author
2012-07-18C6X: add basic support for TMS320C6678 SoCKen Cox
This patch adds support for the TMS320C6678 SoC on an EVMC6678LE evaluation board. The 6678 is a C66x family CPU which is very similar to the already supported C64x CPUs with the addition of floating point instructions. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> CC: Aurelien Jacquiot <a-jacquiot@ti.com> CC: linux-c6x-dev@linux-c6x.org
2012-07-18C6X: remove megamod-pic requirement on direct-mapped core picMark Salter
The megamodule PIC cascades a number of interrupt sources into the core priority PIC. The megamodule code depends on the core hardware interrupt numbers being mapped one-to-one with regard to linux interrupt numbers. This patch removes that dependence in order to pave the way for removing the direct mapping in the core PIC code. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-03-28Disintegrate asm/system.h for C6XDavid Howells
Disintegrate asm/system.h for C6X. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com> cc: linux-c6x-dev@linux-c6x.org
2012-02-16irq_domain/c6x: Use library of xlate functionsGrant Likely
The c6x irq controllers don't need to define custom .xlate hooks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-02-16irq_domain/c6x: constify irq_domain structuresGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-02-16irq_domain/c6x: Convert c6x to use generic irq_domain support.Mark Salter
The C6X IRQ support was copied almost verbatim from the PowerPC virtual IRQ code. The PowerPC code was used as the basis for generic irq_domain support, so this patch mostly copies what what done to arch/powerpc by Grant Likely in his irq_domain patch series. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-01-08C6X: fix timer64 initializationMark Salter
Some SoCs have a timer block enable controlled through the DSCR registers. There is a problem in the timer64 driver initialization where the code accesses a timer register to get the divisor used to calculate timer clock rate. If the timer block has not been enabled when this register read takes place, an exception is generated. This patch makes sure that the timer block is enabled before accessing the registers. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-01-08C6X: fix layout of EMIFA registersMark Salter
Signed-off-by: Mark Salter <msalter@redhat.com>
2011-10-06C6X: DSCR - Device State Configuration RegistersMark Salter
All SoCs provide an area of device configuration registers called the DSCR. The location of specific registers as well as their use varies considerably from implementation to implementation. Rather than having to rely on additional SoC-specific DSCR code for each new supported SoC, this code generalize things as much as possible using device tree properties. Initialization must take place early on (setup_arch time) in case the event timer device needs to be enable via the DSCR. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: EMIF - External Memory InterfaceMark Salter
Several SoC parts provide a simple bridge to support external memory mapped devices. This code probes the device tree for an EMIF node and sets up the bridge registers if such a node is found. Beyond initial set up, there is no further need to access the bridge control registers. External devices on the bus are accessed through their MMIO registers using suitable drivers. The bridge hardware does provide for timeout and other error interrupts, but these are not yet supported. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: cache controlAurelien Jacquiot
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: clocksMark Salter
The C6X SoCs contain several PLL controllers each with up to 16 clock outputs feeding into the cores or peripheral clock domains. The hardware is very similar to arm/mach-davinci clocks. This is still a work in progress which needs to be updated once device tree clock binding changes shake out. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: interrupt handlingAurelien Jacquiot
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: time managementAurelien Jacquiot
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: devicetree supportMark Salter
This is the basic devicetree support for C6X. Currently, four boards are supported. Each one uses a different SoC part. Two of the four supported SoCs are multicore. One with 3 cores and the other with 6 cores. There is no coherency between the core-level caches, so SMP is not an option. It is possible to run separate kernel instances on the various cores. There is currently no C6X bootloader support for device trees so we build in the DTB for now. There are some interesting twists to the hardware which are of note for device tree support. Each core has its own interrupt controller which is controlled by special purpose core registers. This core controller provides 12 general purpose prioritized interrupt sources. Each core is contained within a hardware "module" which provides L1 and L2 caches, power control, and another interrupt controller which cascades into the core interrupt controller. These core module functions are controlled by memory mapped registers. The addresses for these registers are the same for each core. That is, when coreN accesses a module-level MMIO register at a given address, it accesses the register for coreN even though other cores would use the same address to access the register in the module containing those cores. Other hardware modules (timers, enet, etc) which are memory mapped can be accessed by all cores. The timers need some further explanation for multicore SoCs. Even though all timer control registers are visible to all cores, interrupt routing or other considerations may make a given timer more suitable for use by a core than some other timer. Because of this and the desire to have the same image run on more than one core, the timer nodes have a "ti,core-mask" property which is used by the driver to scan for a suitable timer to use. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06C6X: build infrastructureAurelien Jacquiot
Original port to early 2.6 kernel using TI COFF toolchain. Brought up to date by Mark Salter <msalter@redhat.com> Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>