summaryrefslogtreecommitdiff
path: root/arch/m68k/coldfire
AgeCommit message (Collapse)Author
2016-09-26m68k: let clk_disable() return immediately if clk is NULLMasahiro Yamada
In many of clk_disable() implementations, it is a no-op for a NULL pointer input, but this is one of the exceptions. Making it treewide consistent will allow clock consumers to call clk_disable() without NULL pointer check. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-09-26m68k: move ColdFire _bootmem_alloc codeGreg Ungerer
The early ColdFire bootmem_alloc() code is currently only included in the board support for the Coldire 54xx platforms. It will be used on all ColdFire MMU enabled platforms as others are supported. So move the mcf54xx_bootmem_alloc() function to be generally available to all MMU enabled ColdFire parts (and use a more generic name for it). Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-09-26m68k: report correct FPU type on ColdFire MMU platformsGreg Ungerer
Not all ColdFire SoC parts that have an MMU also have an FPU - so set an FPU type (via m68k_fputype) appropriate for the configured platform. With this set correctly /proc/cpuinfo will report FPU "none" on devices that don't have one. And kernel code paths that initialize FPU hardware will now only execute if an FPU is actually present. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-09-26m68k: set appropriate machine type for m5411x SoC platformsGreg Ungerer
Create a new machine type for platforms based around the ColdFire 5441x SoC family. Set that machine type on startup when building for this platform type. Currently the ColdFire head.S hard codes a M54xx machine type at startup - since that is the only platform type currently supported with MMU enabled. The m5441x has an MMU and this change forms part of the support required to run it with the MMU enabled. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-09-26m68knommu: switch to using IO access methods in WildFire board codeGreg Ungerer
Most ColdFire support code has switched to using IO memory access methods (readb/writeb/etc) when reading and writing internal peripheral device registers. The WildFire board specific halt code was missed. As it is now the WildFire code is broken, since all register definitions were changed to be register addresses only some time ago. Fix the WildFire board code to use the appropriate IO access functions. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-09-26m68knommu: fix early setup to not access variablesGreg Ungerer
The early setup code for the ColdFire 53xx platform accesses variables before the RAM and other system initialization steps may have taken place. Currently it has 2 global variables that will end up in the bss section that are accessed during this early setup. There is a special static RAM stack setup at this time, but not necessarily the RAM where kernel data sections will end up. Even on system setups where RAM is setup by a boot loader the access to the early setup variables is before the BSS section has been initialized. This can potentially corrupt a ram loaded root filesystem that sits in that memory area before it has been moved. These 2 variables are not used at all after being set, and can just be removed. Reported-by: Christian Gieseler <christiangieseler@yahoo.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2016-07-03m68k: Assorted spelling fixesAndrea Gelmini
- s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-04-11m68k/gpio: remove arch specific sysfs bus deviceGreg Ungerer
The ColdFire architecture specific gpio support code registers a sysfs bus device named "gpio". This clashes with the new generic API device added in commit 3c702e99 ("gpio: add a userspace chardev ABI for GPIOs"). The old ColdFire sysfs gpio device was never used for anything specific, and no links or other nodes were created under it. The new API sysfs gpio device has all the same default sysfs links (device, drivers, etc) and they are properly populated. Remove the old ColdFire sysfs gpio registration. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-17Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-07m68knommu: fix FEC platform device registration when driver is modularGreg Ungerer
The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can be compiled into the kernel, or as a module. Therefore the platform device support for it is required whenever the driver is enabled - not just when built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional check on only the driver being built into the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-02-19m68k: gpio: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04m68k: coldfire/gpio: Be sure to clamp return valueLinus Walleij
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2015-11-22m68k/mm: m54xx - Add missing initialization of max_pfnGeert Uytterhoeven
If max_pfn is not initialized, the various /proc/kpage* files are empty, and selftests/vm/mlock2-tests will fail. max_pfn is also used by the block layer to calculate DMA masks. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Greg Ungerer <gerg@uclinux.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-08Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k/colfire fixes from Greg Ungerer: "Only a couple of patches this time. One migrating the clock driver code to the new set-state interface. The other cleaning up to use the PFN_DOWN macro" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k/coldfire: use PFN_DOWN macro m68k/coldfire/pit: Migrate to new 'set-state' interface
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-08-31phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24m68k/coldfire: use PFN_DOWN macroAlexander Kuleshov
Replace ((x) >> PAGE_SHIFT) with the predefined PFN_DOWN macro. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2015-08-24m68k/coldfire/pit: Migrate to new 'set-state' interfaceViresh Kumar
Migrate m68k driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in ->set_mode(RESUME) and so tick_resume() isn't implemented. Cc: Greg Ungerer <gerg@uclinux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2015-08-01m68k/irq: Prepare irq handlers for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org
2015-04-20Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k fixes from Greg Ungerer: "Nothing big, spelling fixes and fix/cleanup for ColdFire eth device setup" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix fec setup warning for ColdFire 5271 builds m68knommu: ColdFire 5271 only has a single FEC controller m68k: Fix trivial typos in comments
2015-03-30m68knommu: fix fec setup warning for ColdFire 5271 buildsGreg Ungerer
Building for the ColdFire 5271 produces the following warning: arch/m68k/coldfire/m527x.c: In function ‘m527x_fec_init’: arch/m68k/coldfire/m527x.c:95:6: warning: unused variable ‘par’ Fix it by moving the definition of par inside the 5271 conditional code. Reported-by: ertheb <3rth3bnospam@ethe.fr> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2015-03-12PCI: Assign resources before drivers claim devices (pci_scan_bus())Yijing Wang
Previously, pci_scan_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_bus() and do it after any resource assignment in the callers. [bhelgaas: changelog, check for failure in mcf_pci_init()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: "David S. Miller" <davem@davemloft.net> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Guan Xuetao <gxt@mprc.pku.edu.cn> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com>
2014-09-29m68k/coldfire: remove second asm/mcfclk.h inclusion in m54xx.cFabian Frederick
asm/mcfclk.h was included twice. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2014-09-29m68knommu: fix size of address field for 5272 interrupt controllerGreg Ungerer
Picked up by the 0-day buidler: All warnings: >> arch/m68k/coldfire/intc-5272.c:46:20: warning: large integer implicitly truncated to unsigned type [-Woverflow] /*MCF_IRQ_EINT1*/ { .icr = MCFSIM_ICR1, .index = 28, .ack = 1, }, ... The problem stems from the changes to make all ColdFire register addresses absolute, in commit d72a5abb ("make remaining ColdFire 5272 register definitions absolute"). That change did not take into account that the addresses were stored as offsets in the irqmap of the intc-5272.c code. Make the field that now stores register addresses big enough to hold addresses. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2014-09-29m68k: fix crufty ColdFire intro commentsGreg Ungerer
Quite a few of the ColdFire specific support files have a pathname in the title comments of the file. These files have moved around a bit over the years, and most are no longer accurate. Remove the pathname and fix the comments to include at least a short description of the files contents. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-09-29m68k: move coldfire platform codeGreg Ungerer
Move the m68k ColdFire platform support code directory to be with the existing m68k platforms. Although the ColdFire is not a platform as such, we have always kept all its support together. No reason to change that as this time. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>