summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)Author
2011-02-16m68knommu: add optimize memmove() functionGreg Ungerer
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68k: remove arch specific non-optimized memcmp()Greg Ungerer
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-23m68k/amiga: Fix "debug=mem"Geert Uytterhoeven
`debug=mem' on Amiga has been broken for a while. early_param() processing is done very/too early, i.e. before amiga_identify() / amiga_chip_init(), causing amiga_savekmsg_setup() not to find any Chip RAM. As we don't plan to free this memory anyway, just steal it from the initial Chip RAM memory block instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-23m68k/atari: Rename "scc" to "atari_scc"Geert Uytterhoeven
It's a way too generic name for a global #define and conflicts with a variable with the same name, causing build errors like: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary | | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary & | make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-22m68k: Uninline strchr()Geert Uytterhoeven
Some versions of gcc replace calls to strstr() with single-character "needle" string parameters by calls to strchr() behind our back. If strchr() is defined as an inline function, this causes linking errors like ERROR: "strchr" [drivers/target/target_core_mod.ko] undefined! As m68k is the only architecture that has an inline strchr() and this inline version is not an optimized asm version, uninline strchr() and use the standard out-of-line C version in lib/string.c instead. This also decreases the defconfig/allmodconfig kernel image sizes by a few hundred bytes. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits) m68knommu: fix broken setting of irq_chip and handler m68knommu: switch to using -mcpu= flags for ColdFire targets m68knommu: arch/m68knommu/Kconfig whitespace cleanup m68knommu: create optimal separate instruction and data cache for ColdFire m68knommu: support ColdFire caches that do copyback and write-through m68knommu: support version 2 ColdFire split cache m68knommu: make cache push code ColdFire generic m68knommu: clean up ColdFire cache control code m68knommu: move inclusion of ColdFire v4 cache registers m68knommu: merge bit definitions for version 3 ColdFire cache controller m68knommu: create bit definitions for the version 2 ColdFire cache controller m68knommu: remove empty __iounmap() it is no used m68knommu: remove kernel_map() code, it is not used m68knommu: remove do_page_fault(), it is not used m68knommu: use user stack pointer hardware on some ColdFire cores m68knommu: remove command line printing DEBUG m68knommu: remove fasthandler interrupt code m68knommu: move UART addressing to part specific includes m68knommu: fix clock rate value reported for ColdFire 54xx parts m68knommu: move ColdFire CPU names into their headers ...
2011-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: Add MCF548x watchdog driver. watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCs watchdog: Add TCO support for nVidia chipsets watchdog: Add support for sp5100 chipset TCO watchdog: f71808e_wdt: add F71862FG, F71869 to Kconfig watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCH watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDs watchdog: ks8695_wdt: include mach/hardware.h instead of mach/timex.h. watchdog: Propagate Book E WDT period changes to all cores watchdog: add CONFIG_WATCHDOG_NOWAYOUT support to PowerPC Book-E watchdog driver watchdog: alim7101_wdt: fix compiler warning on alim7101_pci_tbl watchdog: alim1535_wdt: fix compiler warning on ali_pci_tbl watchdog: Fix reboot on W83627ehf chipset. watchdog: Add watchdog support for W83627DHG chip watchdog: f71808e_wdt: Add Fintek F71869 watchdog watchdog: add f71862fg support watchdog: clean-up f71808e_wdt.c
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-12watchdog: Add MCF548x watchdog driver.Philippe De Muyter
Add watchdog driver for MCF548x. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-07m68knommu: Switch to saner sigsuspendAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Check __get_user()/__put_user() return valueAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Missing syscall_trace() on sigreturnAl Viro
If we leave sigreturn via ret_from_signal, we end up with syscall trace only on entry, leading to very unhappy strace, among other things. Note that this means different behaviours for signals delivered while we were in pagefault and for ones delivered while we were in interrupt... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Fix stack mangling logics in sigreturnAl Viro
a) we should hold modifying regs->format until we know we *will* be doing stack expansion; otherwise attacker can modify sigframe to have wrong ->sc_formatvec and install SIGSEGV handler. b) we should *not* mix copying saved extra stuff from userland with expanding the stack; once we'd done that manual memmove, we'd better not return to C, so cleanup is very hard to do. The easiest way is to copy it on stack first, making sure we won't overwrite on stack expansion. Fortunately that's easy to do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: If we fail to set sigframe up, just leave regs alone...Al Viro
Same principle as with the previous patch - do not destroy the state if sigframe setup fails. Incidentally, it's actually _less_ work - we don't need to go through adjust_stack dance on failure if we don't touch regs->stkadj until we know we'd written sigframe out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Don't lose state if sigframe setup failsAl Viro
If we'd failed in setup_frame(), we've no place to store the original sigmask. It's not an unrecoverable situation - we raise SIGSEGV, but that SIGSEGV might be successfully handled (e.g. on altstack). In that case we really don't want sa_mask of original signal permanently slapped on the set of blocked signals. Standard solution: have setup_frame()/setup_rt_frame() report failure and don't mess with the signal-related state if that has happened... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Simplify the singlestepping handling in signalsAl Viro
Instead of checking the return value of do_signal() we can just do the work (raise SIGTRAP and clear SR.T1) directly in handle_signal(), when setting the sigframe up. Simplifies the assembler glue and is closer to the way we do it on other targets. Note that do_delayed_trace does *not* disappear; it's still needed to deal with single-stepping through syscall, since 68040 doesn't raise the trace exception at all if the trap exception is pending. We hit it after returning from sys_...() if TIF_DELAYED_TRACE is set; all that has changed is that we don't reuse it for "single-step into the handler" codepath. As the result, do_signal() doesn't need to return anything anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Switch to saner sigsuspend()Al Viro
and saner do_signal() arguments, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Resetting sa_handler in local copy of k_sigaction is pointlessAl Viro
... and had been such since the introduction of get_signal_to_deliver() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-05m68k/sun3: Kill pte_unmap() warningsGeert Uytterhoeven
Since commit 31c911329e048b715a1dfeaaf617be9430fd7f4e ("mm: check the argument of kunmap on architectures without highmem"), we get lots of warnings like arch/m68k/kernel/sys_m68k.c:508: warning: passing argument 1 of ‘kunmap’ from incompatible pointer type As m68k doesn't support highmem anyway, open code the calls to kmap() and kunmap() (the latter is a no-op) to kill the warnings, like is done on most other architectures without CONFIG_HIGHPTE. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net>
2011-01-05m68knommu: create optimal separate instruction and data cache for ColdFireGreg Ungerer
Create separate functions to deal with instruction and data cache flushing. This way we can optimize them for the vairous cache types and arrangements used across the ColdFire family. For example the unified caches in the version 3 cores means we don't need to flush the instruction cache. For the version 2 cores that do not do data cacheing (or where we choose instruction cache only) we don't need to do any data flushing. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: support ColdFire caches that do copyback and write-throughGreg Ungerer
The version 3 and version 4 ColdFire cache controllers support both write-through and copy-back modes on the data cache. Allow for Kconfig time configuration of this, and set the cache mode appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: support version 2 ColdFire split cacheGreg Ungerer
The newer version 2 ColdFire CPU cores support a configurable cache arrangement. The cache memory can be used as all instruction cache, all data cache, or split in half for both instruction and data caching. Support this setup via a Kconfig time menu that allows a kernel builder to choose the arrangement they want to use. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make cache push code ColdFire genericGreg Ungerer
Currently the code to push cache lines is only available to version 4 cores. Version 3 cores may also need to use this if we support copy- back caches on them. Move this code to make it more generic, and useful for all version ColdFire cores. With this in place we can now have a single cache_flush_all() code path that does all the right things on all version cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: clean up ColdFire cache control codeGreg Ungerer
The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: move inclusion of ColdFire v4 cache registersGreg Ungerer
Move the inclusion of the version 4 cache controller registers so that it is with all the other register bit flag definitions. This makes it consistent with the other version core inclusion points, and means we don't need "#ifdef"ery in odd-ball places for these definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: merge bit definitions for version 3 ColdFire cache controllerGreg Ungerer
All version 3 based ColdFire CPU cores have a similar cache controller. Merge all the exitsing definitions into a single file, and make them similar in style and naming to the existing version 2 and version 4 cache controller definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: create bit definitions for the version 2 ColdFire cache controllerGreg Ungerer
The version 2 ColdFire CPU based cores all contain a similar cache controller unit. Create a set of bit flag definitions for the supporting registers. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: remove empty __iounmap() it is no usedGreg Ungerer
The empty __iounmap() function is not used on m68knommu at all. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: use user stack pointer hardware on some ColdFire coresGreg Ungerer
The more modern ColdFire parts (even if based on older version cores) have separate user and supervisor stack pointers (a7 register). Modify the ColdFire CPU setup and exception code to enable and use this on parts that have it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: move UART addressing to part specific includesGreg Ungerer
The ColdFire UART base addresses varies between the different ColdFire family members. Instead of keeping the base addresses with the UART definitions keep them with the other addresses definitions for each ColdFire part. The motivation for this move is so that when we add new ColdFire part definitions, they are all in a single file (and we shouldn't normally need to modify the UART definitions in mcfuart.h at all). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: fix clock rate value reported for ColdFire 54xx partsGreg Ungerer
The instruction timings of the ColdFire 54xx family parts are different to other version 4 parts (or version 2 or 3 parts for that matter too). Move the instruction timing setting into the ColdFire part specific headers, and set the 54xx value appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: move ColdFire CPU names into their headersGreg Ungerer
Move the ColdFire CPU names out of setup.c and into their repsective headers. That way when we add new ones we won't need to modify setup.c any more. Add the missing 548x CPU name. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: make Coldfire 548x support more genericGreg Ungerer
The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Use symbolic constants for cache operations on M54xxPhilippe De Muyter
Now that we have meaningfull symbolic constants for bit definitions of the cache registers of m5407 and m548x chips, use them to improve readability, portability and efficiency of the cache operations. This also fixes __flush_cache_all for m548x chips : implicit DCACHE_SIZE was exact for m5407, but wrong for m548x. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Move __flush_cache_all definition for m54xx in m54xxacr.hPhilippe De Muyter
__flush_cache_all for m54xx is intrinsically related to the bit definitions in m54xxacr.h. Move it there from cacheflush_no.h, for easier maintenance. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05m68knommu: Create new m54xxacr.h from m5407sim.h subpartPhilippe De Muyter
The MCF548x have the same cache control registers as the MCF5407. Extract the bit definitions for the ACR and CACR registers from m5407sim.h and move them to a new file m54xxacr.h. Those definitions are not used anywhere yet, so no other file is involved. This is a preparation for m54xx cache support cleanup. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-03m68k: fix comment typo diable -> disable.Justin P. Mattock
The below patch fixes a typo "diable" to "disable". Please let me know if this is correct or not. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-10fix comment typos concerning "consistent"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-03m68k, m68knommu: Do not include linux/hardirq.h in asm/irqflags.hPhilippe De Muyter
Recent changes to header files made kernel compilation for m68k/m68knommu fail with : CC arch/m68knommu/kernel/asm-offsets.s In file included from /archives/linux/git/arch/m68k/include/asm/system.h:2, from include/linux/wait.h:25, from include/linux/mmzone.h:9, from include/linux/gfp.h:4, from include/linux/irq.h:20, from include/asm-generic/hardirq.h:12, from /archives/linux/git/arch/m68k/include/asm/hardirq_no.h:17, from /archives/linux/git/arch/m68k/include/asm/hardirq.h:2, from include/linux/hardirq.h:10, from /archives/linux/git/arch/m68k/include/asm/irqflags.h:5, from include/linux/irqflags.h:15, from include/linux/spinlock.h:53, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from arch/m68knommu/kernel/asm-offsets.c:12: /archives/linux/git/arch/m68k/include/asm/system_no.h: In function ‘__xchg’: /archives/linux/git/arch/m68k/include/asm/system_no.h:79: error: implicit +declaration of function ‘local_irq_save’ /archives/linux/git/arch/m68k/include/asm/system_no.h:101: error: implicit +declaration of function ‘local_irq_restore’ Fix that Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-03m68knommu: add back in declaration of do_IRQGreg Ungerer
The cleanup and merge of machdep should not have removed the do_IRQ declaration. It is needed by the 68328 based targets. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-28Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-27ptrace: cleanup arch_ptrace() on m68kNamhyung Kim
Use new 'regno', 'datap' variables in order to remove duplicated expressions and unnecessary castings. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: change signature of arch_ptrace()Namhyung Kim
Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26m68k{nommu}/blackfin : remove old assembler-only flags bit definitionsPhilippe De Muyter
Long ago, PT_TRACESYS_OFF and friends were introduced as hard defines to avoid straight constants in assembler parts of linux m68k. They are not used anymore, and were not updated to follow changes in linux kernel. Remove them. When similar constants are needed, they are now generated using asm-offsets.c. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26mm: remove pte_*map_nested()Peter Zijlstra
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68knommu: convert to using tracehook_report_syscall_* m68knommu: some boards use fixed phy for FEC ethernet m68knommu: support the external GPIO based interrupts of the 5272 m68knommu: mask of vector bits in exception word properly m68knommu: change to new flag variables m68knommu: Fix MCFUART_TXFIFOSIZE for m548x. m68knommu: add basic mmu-less m548x support m68knommu: .gitignore vmlinux.lds m68knommu: stop using __do_IRQ m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. m68knommu: add support for Coldfire 547x/548x interrupt controller m68k{nommu}: Remove unused DEFINE's from asm-offsets.c m68knommu: whitespace cleanup in 68328/entry.S m68knommu: Document supported chips in intc-2.c and intc-simr.c. m68knommu: fix strace support for 68328/68360 m68knommu: fix default starting date arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option arch/m68knommu: Removing dead RAM_{16,32}_MB config option arch/m68knommu: Removing dead M68KFPU_EMU config option arch/m68knommu: Removing dead RELOCATE config option ...
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA m68k: Remove big kernel lock in cache flush code m68k: __pa(): cast arg to long fbdev: atafb - Remove undead ifdef ATAFB_FALCON zorro: Fix device_register() error handling fbdev/m68k: Fix section mismatches in q40fb.c m68k/m68knommu: merge the MMU and non-MMU traps.h m68k/m68knommu: merge MMU and non-MMU thread_info.h m68k/m68knommu: merge MMU and non-MMU atomic.h m68k/m68knommu: clean up page.h m68k/m68knommu: merge machdep.h files into a single file m68k/m68knommu: merge MMU and non-MMU string.h m68k/m68knommu: Remove dead SMP config option m68k: move definition of THREAD_SIZE into thread_info_mm.h m68k: Use asm-generic/ioctls.h (enables termiox) m68k: Remove dead GG2 config option