summaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon
AgeCommit message (Collapse)Author
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-11-25USB: host: Remove ehci-octeon and ohci-octeon driversAlan Stern
Remove special-purpose octeon drivers and instead use ehci-platform and ohci-platform as suggested with http://marc.info/?l=linux-mips&m=140139694721623&w=2 [andreas.herrmann: fixed compile error] Cc: David Daney <david.daney@cavium.com> Cc: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24MIPS: Replace use of phys_t with phys_addr_t.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Octeon: Mark octeon_model_get_string() with __initAaro Koskinen
Mark octeon_model_get_string() with __init and make internal functions static. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7668/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Octeon: Move code to avoid forward declarationAaro Koskinen
Move code to avoid forward declarations. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7667/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Octeon: Move cvmx_fuse_read_byte()Aaro Koskinen
Move cvmx_fuse_read_byte() into a .c file. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Aaro Koskinen <aaro.koskinen@nsn.com> Patchwork: https://patchwork.linux-mips.org/patch/7666/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-20treewide: fix typo in printk and KconfigMasanari Iida
This patch fix spelling typo in printk and Kconfig within various part of kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-27MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-awareAlexander Sverdlin
Make Octeon GPIO IRQ chip CPU hotplug-aware Seems that irq_cpu_offline callbacks were forgotten in v1 and v2 CIU GPIO chips. There is such a callback for octeon_irq_chip_ciu2_gpio, covering CIU2 chips. Without this callback GPIO IRQs are not being migrated during core offlining. Patch is tested on Octeon II. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22MIPS: Octeon: Remove special case for simulator command line.David Daney
There is no reason to have the kernel to append commands when running under the simulator, the simulator is perfectly capable of supplying the necessary command line arguments. Furthermore, if the simulator needs something different than what is hard coded in the kernel, it cannot get it if the kernel overrides it. Fix/Simplify the whole thing by removing this bit. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the MIPS pull request for the next kernel: - Zubair's patch series adds CMA support for MIPS. Doing so it also touches ARM64 and x86. - remove the last instance of IRQF_DISABLED from arch/mips - updates to two of the MIPS defconfig files. - cleanup of how cache coherency bits are handled on MIPS and implement support for write-combining. - platform upgrades for Alchemy - move MIPS DTS files to arch/mips/boot/dts/" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (24 commits) MIPS: ralink: remove deprecated IRQF_DISABLED MIPS: pgtable.h: Implement the pgprot_writecombine function for MIPS MIPS: cpu-probe: Set the write-combine CCA value on per core basis MIPS: pgtable-bits: Define the CCA bit for WC writes on Ingenic cores MIPS: pgtable-bits: Move the CCA bits out of the core's ifdef blocks MIPS: DMA: Add cma support x86: use generic dma-contiguous.h arm64: use generic dma-contiguous.h asm-generic: Add dma-contiguous.h MIPS: BPF: Add new emit_long_instr macro MIPS: ralink: Move device-trees to arch/mips/boot/dts/ MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/ MIPS: sead3: Move device-trees to arch/mips/boot/dts/ MIPS: Lantiq: Move device-trees to arch/mips/boot/dts/ MIPS: Octeon: Move device-trees to arch/mips/boot/dts/ MIPS: Add support for building device-tree binaries MIPS: Create common infrastructure for building built-in device-trees MIPS: SEAD3: Enable DEVTMPFS MIPS: SEAD3: Regenerate defconfigs MIPS: Alchemy: DB1300: Add touch penirq support ...
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
2014-09-26treewide: Fix typos in KconfigMasanari Iida
This patch fix spelling typos found in Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-22MIPS: Octeon: Move device-trees to arch/mips/boot/dts/Andrew Bresticker
Move the Octeon device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. Since Octeon requires the device-tree to be built into the kernel, select BUILTIN_DTB as well. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7556/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-26mips: Replace __get_cpu_var usesChristoph Lameter
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-19MIPS: OCTEON: make get_system_type() thread-safeAaro Koskinen
get_system_type() is not thread-safe on OCTEON. It uses static data, also more dangerous issue is that it's calling cvmx_fuse_read_byte() every time without any synchronization. Currently it's possible to get processes stuck looping forever in kernel simply by launching multiple readers of /proc/cpuinfo: (while true; do cat /proc/cpuinfo > /dev/null; done) & (while true; do cat /proc/cpuinfo > /dev/null; done) & ... Fix by initializing the system type string only once during the early boot. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: stable@vger.kernel.org Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7437/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2014-08-19MIPS: Add common plat_irq_dispatch declarationSergey Ryazanov
Add common declaration to get rid of following sparse warning: "symbol 'plat_irq_dispatch' was not declared. Should it be static?" Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7539/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-08-02MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursiveFabian Frederick
Fix checkpatch warning: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7224/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: add interface & port definitions for D-Link DSR-1000NAaro Koskinen
Add interface & port definitions for D-Link DSR-1000N. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7219/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: add USB clock type for D-Link DSR-1000NAaro Koskinen
Add USB clock type for D-Link DSR-1000N. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7218/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: disable HOTPLUG_CPU if the bootloader version is incorrectAaro Koskinen
Disable HOTPLUG_CPU functionality if the bootloader version is incorrect. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: support disabling HOTPLUG_CPU run-timeAaro Koskinen
If nosmp kernel option given, we can assume HOTPLUG_CPU is disabled. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7202/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02MIPS: OCTEON: SMP: delete redundant checkAaro Koskinen
The same check is already done earlier in octeon_smp_hotplug_setup(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/7199/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-19staging: octeon-ethernet: Move PHY activation to .ndo_open().David Daney
This prevents PHY not found types of errors for PHY drivers that are probed after the Ethernet driver is probed, because the ifconfig UP is done from userspace after all drivers have been probed. Also avoid the cvmx-helper-board.c PHY code if a real PHY driver is present, this allows a bootloader supplied device tree to specify the PHY information rather than having to modify the code for each different board. Tested-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: devel@driverdev.osuosl.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
2014-06-04MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XXEunbong Song
In octeon_3xxx.dts file, there is a definiton for twsi/twsi2 interrupts. But there is no code for initialization of this interrupts. This patch adds code for initialization of twsi interrupts. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6816/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: OCTEON: Move CAVIUM_OCTEON_CVMSEG_SIZE to CPU_CAVIUM_OCTEONDavid Daney
CVMSEG is related to the CPU core not the SoC system. So needs to be configurable there. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-29MIPS: octeon: Add interface mode detection for Octeon IIAlex Smith
Add interface mode detection for Octeon II. This is necessary to detect the interface modes correctly on the UBNT E200 board. Code is taken from the UBNT GPL source release, with some alterations: SRIO, ILK and RXAUI interface modes are removed and instead return disabled as these modes are not currently supported. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Tested-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7039/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-27MIPS: SMP: Remove plat_smp_ops cpus_done method.Ralf Baechle
Nothing was using the method and there isn't any need for this hook. This leaves smp_cpus_done() empty for the moment. As suggested by Paul Bolle <pebolle@tiscali.nl>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23MIPS: Octeon: Remove checks for CONFIG_CAVIUM_GDBPaul Bolle
Three checks for CONFIG_CAVIUM_GDB were added in v2.6.29. But the Kconfig symbol CAVIUM_GDB was never added to the tree. Remove these checks. Also remove the last reference to octeon_get_boot_debug_flag(). There is no definition of that function anyway. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>) Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6976/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-23MIPS: Remove check for CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECCPaul Bolle
A check for CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC was added in v2.6.29, but without the related Kconfig symbol. Remove this check. Also remove the test for an "ecc_verbose" kernel parameter. It is undocumented and has no effect anyway. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-13Merge branch 'dt-bus-name' into for-nextRob Herring
2014-04-30mips: octeon: convert to use unflatten_and_copy_device_treeRob Herring
The octeon FDT code can be simplified by using unflatten_and_copy_device_tree function. This removes all accesses to FDT header data by the arch code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Tested-by: Grant Likely <grant.likely@linaro.org>
2014-04-17genirq: Allow forcing cpu affinity of interruptsThomas Gleixner
The current implementation of irq_set_affinity() refuses rightfully to route an interrupt to an offline cpu. But there is a special case, where this is actually desired. Some of the ARM SoCs have per cpu timers which require setting the affinity during cpu startup where the cpu is not yet in the online mask. If we can't do that, then the local timer interrupt for the about to become online cpu is routed to some random online cpu. The developers of the affected machines tried to work around that issue, but that results in a massive mess in that timer code. We have a yet unused argument in the set_affinity callbacks of the irq chips, which I added back then for a similar reason. It was never required so it got not used. But I'm happy that I never removed it. That allows us to implement a sane handling of the above scenario. So the affected SoC drivers can add the required force handling to their interrupt chip, switch the timer code to irq_force_affinity() and things just work. This does not affect any existing user of irq_set_affinity(). Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com>, Cc: Daniel Lezcano <daniel.lezcano@linaro.org>, Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-19MIPS: Octeon: Fix warning in of_device_alloc on cn3xxxAndreas Herrmann
Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Reported-by: Yang Wei <wei.yang@windriver.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2014-01-23MIPS: OCTEON: Supply OCTEON+ USB nodes in internal device trees.David Daney
This will be needed by the next patch to use said nodes for probing via the device tree. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6185/
2014-01-23MIPS: cavium-octeon: export symbols needed by octeon-ethernetAaro Koskinen
Export symbols needed by the octeon-ethernet driver. The patch fixes a build failure with CONFIG_OCTEON_ETHERNET=m. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6166/
2014-01-23MIPS: cavium-octeon: fix early boot hang on EBH5600 boardAaro Koskinen
The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is trying enumerate a non-existant interface. The actual hang happens in cvmx_helper_interface_get_mode(): mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); when interface == 4. We can avoid this situation by first checking that the interface exists in the DTB. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6101/
2014-01-23MIPS: cavium-octeon: fix out-of-bounds array accessAaro Koskinen
When booting with in-kernel DTBs, the pruning code will enumerate interfaces 0-4. However, there is memory reserved only for 4 so some other data will get overwritten by cvmx_helper_interface_enumerate(). Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6102/
2013-10-29MIPS: Panic messages should not end in \n.Ralf Baechle
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17MIPS: Optimize current_cpu_type() for better code.Ralf Baechle
o Move current_cpu_type() to a separate header file o #ifdefing on supported CPU types lets modern GCC know that certain code in callers may be discarded ideally turning current_cpu_type() into a function returning a constant. o Use current_cpu_type() rather than direct access to struct cpuinfo_mips. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5833/
2013-09-03MIPS: Move declaration of Octeon function fixup_irqs() to header.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-26MIPS: cavium-octeon: fix I/O space setup on non-PCI systemsAaro Koskinen
Fix I/O space setup, so that on non-PCI systems using inb()/outb() won't crash the system. Some drivers may try to probe I/O space and for that purpose we can just allocate some normal memory initially. Drivers trying to reserve a region will fail early as we set the size to 0. If a real I/O space is present, the PCI/PCIe support code will re-adjust the values accordingly. Tested with EdgeRouter Lite by enabling CONFIG_SERIO_I8042 that caused the originally reported crash. Reported-by: Faidon Liambotis <paravoid@debian.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5626/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit().
2013-07-19MIPS: Octeon: Fix DT pruning bug with pip portsFaidon Liambotis
During the pruning of the device tree octeon_fdt_pip_iface() is called for each PIP interface and every port up to the port count is removed from the device tree. However, the count was set to the return value of cvmx_helper_interface_enumerate() which doesn't actually return the count but just returns zero on success. This effectively removed *all* ports from the tree. Use cvmx_helper_ports_on_interface() instead to fix this. This successfully restores the 3 ports of my ERLite-3 and fixes the "kernel assigns random MAC addresses" issue. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-14MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 12:50:14 +0000