summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm
AgeCommit message (Collapse)Author
2015-04-20Merge tag 'cpumask-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell: "This is the final removal (after several years!) of the obsolete cpus_* functions, prompted by their mis-use in staging. With these function removed, all cpu functions should only iterate to nr_cpu_ids, so we finally only allocate that many bits when cpumasks are allocated offstack" * tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) cpumask: remove __first_cpu / __next_cpu cpumask: resurrect CPU_MASK_CPU0 linux/cpumask.h: add typechecking to cpumask_test_cpu cpumask: only allocate nr_cpumask_bits. Fix weird uses of num_online_cpus(). cpumask: remove deprecated functions. mips: fix obsolete cpumask_of_cpu usage. x86: fix more deprecated cpu function usage. ia64: remove deprecated cpus_ usage. powerpc: fix deprecated CPU_MASK_CPU0 usage. CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region. staging/lustre/o2iblnd: Don't use cpus_weight staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_ staging/lustre/ptlrpc: Do not use deprecated cpus_* functions blackfin: fix up obsolete cpu function usage. parisc: fix up obsolete cpu function usage. tile: fix up obsolete cpu function usage. arm64: fix up obsolete cpu function usage. mips: fix up obsolete cpu function usage. x86: fix up obsolete cpu function usage. ...
2015-04-18Merge tag 'gpio-v4.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.1 development cycle: - A new GPIO hogging mechanism has been added. This can be used on boards that want to drive some GPIO line high, low, or set it as input on boot and then never touch it again. For some embedded systems this is bliss and simplifies things to a great extent. - Some API cleanup and closure: gpiod_get_array() and gpiod_put_array() has been added to get and put GPIOs in bulk as was possible with the non-descriptor API. - Encapsulate cross-calls to the pin control subsystem in <linux/gpio/driver.h>. Now this should be the only header any GPIO driver needs to include or something is wrong. Cleanups restricting drivers to this include are welcomed if tested. - Sort the GPIO Kconfig and split it into submenus, as it was becoming and unstructured, illogical and unnavigatable mess. I hope this is easier to follow. Menus that require a certain subsystem like I2C can now be hidden nicely for example, still working on others. - New drivers: - New driver for the Altera Soft GPIO. - The F7188x driver now handles the F71869 and F71869A variants. - The MIPS Loongson driver has been moved to drivers/gpio for consolidation and cleanup. - Cleanups: - The MAX732x is converted to use the GPIOLIB_IRQCHIP infrastructure. - The PCF857x is converted to use the GPIOLIB_IRQCHIP infrastructure. - Radical cleanup of the OMAP driver. - Misc: - Enable the DWAPB GPIO for all architectures. This is a "hard IP" block from Synopsys which has started to turn up in so diverse architectures as X86 Quark, ARC and a slew of ARM systems. So even though it's not an expander, it's generic enough to be available for all. - We add a mock GPIO on Crystalcove PMIC after a long discussion with Daniel Vetter et al, tracing back to the shootout at the kernel summit where DRM drivers and sub-componentization was discussed. In this case a mock GPIO is assumed to be the best compromise gaining some reuse of infrastructure without making DRM drivers overly complex at the same time. Let's see" * tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits) Revert "gpio: sch: use uapi/linux/pci_ids.h directly" gpio: dwapb: remove dependencies gpio: dwapb: enable for ARC gpio: removing kfree remove functionality gpio: mvebu: Fix mask/unmask managment per irq chip type gpio: split GPIO drivers in submenus gpio: move MFD GPIO drivers under their own comment gpio: move BCM Kona Kconfig option gpio: arrange SPI Kconfig symbols alphabetically gpio: arrange PCI GPIO controllers alphabetically gpio: arrange I2C Kconfig symbols alphabetically gpio: arrange Kconfig symbols alphabetically gpio: ich: Implement get_direction function gpio: use (!foo) instead of (foo == NULL) gpio: arizona: drop owner assignment from platform_drivers gpio: max7300: remove 'ret' variable gpio: use devm_kzalloc gpio: sch: use uapi/linux/pci_ids.h directly gpio: x-gene: fix devm_ioremap_resource() check gpio: loongson: Add Loongson-3A/3B GPIO driver support ...
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
2015-04-17mips: ip32: add platform data hooks to use DS1685 driverJoshua Kinard
This modifies the IP32 (SGI O2) platform and reset code to utilize the new rtc-ds1685 driver. The old mc146818rtc.h header is removed and ip32_defconfig is updated as well. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17mips: switch to using asm-generic for seccomp.hKees Cook
Switch to using the newly created asm-generic/seccomp.h for the seccomp strict mode syscall definitions. COMPAT definitions retain their overrides and the remaining definitions were identical. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15Merge branch 'exec_domain_rip_v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc Pull exec domain removal from Richard Weinberger: "This series removes execution domain support from Linux. The idea behind exec domains was to support different ABIs. The feature was never complete nor stable. Let's rip it out and make the kernel signal handling code less complicated" * 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (27 commits) arm64: Removed unused variable sparc: Fix execution domain removal Remove rest of exec domains. arch: Remove exec_domain from remaining archs arc: Remove signal translation and exec_domain xtensa: Remove signal translation and exec_domain xtensa: Autogenerate offsets in struct thread_info x86: Remove signal translation and exec_domain unicore32: Remove signal translation and exec_domain um: Remove signal translation and exec_domain tile: Remove signal translation and exec_domain sparc: Remove signal translation and exec_domain sh: Remove signal translation and exec_domain s390: Remove signal translation and exec_domain mn10300: Remove signal translation and exec_domain microblaze: Remove signal translation and exec_domain m68k: Remove signal translation and exec_domain m32r: Remove signal translation and exec_domain m32r: Autogenerate offsets in struct thread_info frv: Remove signal translation and exec_domain ...
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: "Here is the crypto update for 4.1: New interfaces: - user-space interface for AEAD - user-space interface for RNG (i.e., pseudo RNG) New hashes: - ARMv8 SHA1/256 - ARMv8 AES - ARMv8 GHASH - ARM assembler and NEON SHA256 - MIPS OCTEON SHA1/256/512 - MIPS img-hash SHA1/256 and MD5 - Power 8 VMX AES/CBC/CTR/GHASH - PPC assembler AES, SHA1/256 and MD5 - Broadcom IPROC RNG driver Cleanups/fixes: - prevent internal helper algos from being exposed to user-space - merge common code from assembly/C SHA implementations - misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits) crypto: arm - workaround for building with old binutils crypto: arm/sha256 - avoid sha256 code on ARMv7-M crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer crypto: sha512-generic - move to generic glue implementation crypto: sha256-generic - move to generic glue implementation crypto: sha1-generic - move to generic glue implementation crypto: sha512 - implement base layer for SHA-512 crypto: sha256 - implement base layer for SHA-256 crypto: sha1 - implement base layer for SHA-1 crypto: api - remove instance when test failed crypto: api - Move alg ref count init to crypto_check_alg ...
2015-04-14mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZEKees Cook
The arch_randomize_brk() function is used on several architectures, even those that don't support ET_DYN ASLR. To avoid bulky extern/#define tricks, consolidate the support under CONFIG_ARCH_HAS_ELF_RANDOMIZE for the architectures that support it, while still handling CONFIG_COMPAT_BRK. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "Main changes: - jump label asm preparatory work for PowerPC (Anton Blanchard) - rwsem optimizations and cleanups (Davidlohr Bueso) - mutex optimizations and cleanups (Jason Low) - futex fix (Oleg Nesterov) - remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter Zijlstra)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define jump_label: Allow jump labels to be used in assembly jump_label: Allow asm/jump_label.h to be included in assembly locking/mutex: Further simplify mutex_spin_on_owner() locking: Remove atomicy checks from {READ,WRITE}_ONCE locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well locking/rwsem: Fix lock optimistic spinning when owner is not running locking: Remove ACCESS_ONCE() usage locking/rwsem: Check for active lock before bailing on spinning locking/rwsem: Avoid deceiving lock spinners locking/rwsem: Set lock ownership ASAP locking/rwsem: Document barrier need when waking tasks locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads locking/mutex: Refactor mutex_spin_on_owner() locking/mutex: In mutex_spin_on_owner(), return true when owner changes
2015-04-13Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle
2015-04-13Merge branch '4.1-fp' into mips-for-linux-nextRalf Baechle
2015-04-12arch: Remove exec_domain from remaining archsRichard Weinberger
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-04-10MIPS: asm: elf: Set O32 default FPU flagsMarkos Chandras
Set good default FPU flags (FR0) for O32 binaries similar to what the kernel does for the N64/N32 ones. This also fixes a regression introduced in commit 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") when MIPS_O32_FP64_SUPPORT is disabled. In that case, the mips_set_personality_fp() did not set the FPU mode at all because it assumed that the FPU mode was already set properly. That led to O32 userland problems. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reported-by: Mans Rullgard <mans@mansr.com> Fixes: 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Tested-by: Mans Rullgard <mans@mansr.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/9344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: lose_fpu(): Disable FPU when MSA enabledJames Hogan
The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the FPU is in use and MSA isn't enabled. This isn't necessarily a problem because KSTK_STATUS(current), the version of CP0_Status stored on the kernel stack on entry from user mode, does always get updated and gets restored when returning to user mode, but I don't think it was intended, and it is inconsistent with the case of only the FPU being in use. Sometimes leaving the FPU enabled may also mask kernel bugs where FPU operations are executed when the FPU might not be enabled. So lets disable the FPU in the MSA case too. Fixes: 33c771ba5c5d ("MIPS: save/disable MSA in lose_fpu") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.Ralf Baechle
This is no longer needed with the fixed, new and improved definition of cpu_has_mips_r2_exec_hazard in <asm/cpu-features.h>. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: Fix cpu_has_mips_r2_exec_hazard.Ralf Baechle
Returns a non-zero value if the current processor implementation requires an IHB instruction to deal with an instruction hazard as per MIPS R2 architecture specification, zero otherwise. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR caseMarkos Chandras
Commit 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction with "addiu") replaced the "sub" instruction with addiu but it did not update the immediate value in the R10000_LLSC_WAR case. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction with "addiu"") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: r4kcache: Use correct base register for MIPS R6 cache flushesMarkos Chandras
Commit 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions") added support for MIPS R6 cache flushes but it used the wrong base address register to perform the flushes so the same lines were flushed over and over. Moreover, replace the "addiu" instructions with LONG_ADDIU so the correct base address is calculated for 64-bit cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions") Cc: linux-mips@linux-mips.org Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9384/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: asm: asm-eva: Introduce kernel load/store variantsMarkos Chandras
Introduce new macros for kernel load/store variants which will be used to perform regular kernel space load/store operations in EVA mode. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9500/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10MIPS: Octeon: Remove udelay() causing huge IRQ latencyAlexander Sverdlin
udelay() in PCI/PCIe read/write callbacks cause 30ms IRQ latency on Octeon platforms because these operations are called from PCI_OP_READ() and PCI_OP_WRITE() under raw_spin_lock_irqsave(). Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Mathias <mathias.rulf@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/9576/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-09jump_label: Allow asm/jump_label.h to be included in assemblyAnton Blanchard
Wrap asm/jump_label.h for all archs with #ifndef __ASSEMBLY__. Since these are kernel only headers, we don't need #ifdef __KERNEL__ so can simplify things a bit. If an architecture wants to use jump labels in assembly, it will still need to define a macro to create the __jump_table entries (see ARCH_STATIC_BRANCH in the powerpc asm/jump_label.h for an example). Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-1-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08MIPS: BCM63xx: Provide a plat_post_dma_flush hookFlorian Fainelli
Broadcom BCM63xx DSL SoCs utilize BMIPS CPUs, and as such are required to perform a read-ahead cache flush after a DMA transfer. Utilize asm/bmips.h to provide a plat_post_dma_flush_hook, and mach-generic/dma-coherence.h for everything else. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/9726/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: DMA: Allow platforms to override only the post DMA hookFlorian Fainelli
Instead of having platforms to copy the entirety of mach-generic/dma-coherence.h, check whether these platforms have already defined a plat_post_dma_flush hook, and if not, provide an inline stub. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/9725/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: BMIPS: Move post DMA flush implementation to common headerFlorian Fainelli
arch/mips/include/asm/mach-bmips/dma-coherence.h contains the plat_post_dma_flush implementation which is not specific to mach-bmips, but required for all BMIPS-based systems. Move plat_post_dma_flush to arch/mips/include/asm/bmips.h, rename it to bmips_post_dma_flush such that other platforms like bcm63xx can utilize it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/9724/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Respect the ISA level in FCSR handlingMaciej W. Rozycki
Define the central place the default FCSR value is set from, initialised in `cpu_probe'. Determine the FCSR mask applied to values written to the register with CTC1 in the full emulation mode and via ptrace(2), according to the ISA level of processor hardware or the writability of bits 31:18 if actual FPU hardware is used. Software may rely on FCSR bits whose functions our emulator does not implement, so it should not allow them to be set or software may get confused. For ptrace(2) it's just sanity. [ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9711/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: math-emu: Define IEEE 754-2008 feature control bitsMaciej W. Rozycki
Define IEEE 754-2008 feature control bits: FIR.HAS2008, FCSR.ABS2008 and FCSR.NAN2008, and update the `_ieee754_csr' structure accordingly. For completeness define FIR.UFRP too. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: math-emu: Implement the FCCR, FEXR and FENR registersMaciej W. Rozycki
Implement the FCCR, FEXR and FENR "shadow" FPU registers for the architecture levels that include them, for the CFC1 and CTC1 instructions in the full emulation mode. For completeness add macros for the CP1 UFR and UNFR registers too, no actual implementation though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Set `si_code' for SIGFPE signals sent from emulation tooMaciej W. Rozycki
Rework `process_fpemu_return' and move IEEE 754 exception interpretation there, from `do_fpe'. Record the cause bits set in FCSR before they are cleared and pass them through to `process_fpemu_return' so as to set `si_code' correctly too for SIGFPE signals sent from emulation rather than those issued by hardware with the FPE processor exception only. For simplicity `mipsr2_decoder' assumes `*fcr31' has been preinitialised and only sets it to anything if an FPU instruction has been emulated, which in turn is the only case SIGFPE can be issued for here. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Correct FP ISA requirementsMaciej W. Rozycki
Correct ISA requirements for floating-point instructions: * the CU3 exception signifies a real COP3 instruction in MIPS I & II, * the BC1FL and BC1TL instructions are not supported in MIPS I, * the SQRT.fmt instructions are indeed supported in MIPS II, * the LDC1 and SDC1 instructions are indeed supported in MIPS32r1, * the CEIL.W.fmt, FLOOR.W.fmt, ROUND.W.fmt and TRUNC.W.fmt instructions are indeed supported in MIPS32, * the CVT.L.fmt and CVT.fmt.L instructions are indeed supported in MIPS32r2 and MIPS32r6, * the CEIL.L.fmt, FLOOR.L.fmt, ROUND.L.fmt and TRUNC.L.fmt instructions are indeed supported in MIPS32r2 and MIPS32r6, * the RSQRT.fmt and RECIP.fmt instructions are indeed supported in MIPS64r1, Also simplify conditionals for MIPS III and MIPS IV FPU instructions and the handling of the MOVCI minor opcode. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Correct MIPS I FP context layoutMaciej W. Rozycki
Implement the correct ordering of individual floating-point registers within double-precision register pairs for the MIPS I FP context, as required by our FP emulation code and expected by userland talking via ptrace(2). Use L.D and S.D assembly macros that do the right thing like LDC1 and SDC1 from MIPS II up, avoiding the need to mess up with endianness conditionals. This in particular fixes the handling of denormals and NaN generation in Unimplemented Operation emulation traps. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Correct `nofpu' non-functionalityMaciej W. Rozycki
The `cpu_has_fpu' feature flag must not be hardcoded to 1 or the `nofpu' kernel option will be ignored. Remove any such overrides and add a cautionary note. Hardcoding to 0 is fine for FPU-less platforms. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9694/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: bitops.h: Avoid inline asm for constant FLSMaciej W. Rozycki
GCC is smart enough to substitute the final result for FLS calculations as implemented in the fallback C code we have in `__fls' and `fls' applied to constant values. The presence of inline asm defeats the compiler though, forcing it to emit extraneous CLZ/DCLZ calculation for processors that support these instructions. Use `__builtin_constant_p' then to avoid inline asm altogether for constants. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9681/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: mips-r2-to-r6-emul.h: Inline empty `mipsr2_decoder'Maciej W. Rozycki
Use `static inline' rather than `static __maybe_unused' for `mipsr2_decoder' in the empty case, making inlining explicit where it will happen anyway. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: mipsregs.h: Reindent CP0 Cause macrosMaciej W. Rozycki
Reindent CP0 Cause macros for a single space after #define, leaving extra indentation for individual Interrupt Pending bits as with CP0 Status register's Interrupt Mask bits. [ralf@linux-mips.org: Fix conflict.] [ralf@linux-mips.org: Fix indentation of the CAUSEB_FDCI and CAUSEF_FDCI definitions.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: mipsregs.h: Move TX39 macros out of the wayMaciej W. Rozycki
TX39 CP0 Configuration Register 3 macro definitions have been randomly thrown in the middle of a block of CP0 Status register value macros. Move them to the end of the whole CP0 register value macro block, complementing the location of the TX39 Cache register name macro at the end of the CP0 register name macro block. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9668/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: mipsregs.h: Reorder CP1 macro definitionsMaciej W. Rozycki
Originally CP1 macros were placed between CP0 register name macros and CP0 register value macros. As changes were applied to the header the position of CP1 macros gradually has become more and more arbitrary and two separate blocks were created. This may only cause confusion. Move them out of the way then and place together after all the CP0 macros. No semantic change. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9667/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: mipsregs.h: Remove broken commentsMaciej W. Rozycki
Remove a duplicate FPU Status Register reference that has been there since forever and a mistakenly copied and pasted R4xx0 manual reference. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9666/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-07MIPS: Cleanup Loongson-2F's gpio driverHuacai Chen
This cleanup is prepare to move the driver to drivers/gpio. Custom definitions of gpio_get_value()/gpio_set_value() are dropped. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-02MIPS: BCM47xx: Devices database update for 4.1 (or 4.2?)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-02MIPS: Remove prototype for copy_user_pageGuenter Roeck
MIPS architecture code does not provide copy_user_page, so it should not provide a prototype for it either. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Loongson-3: Add CPU Hwmon platform driverHuacai Chen
This add CPU Hwmon (temperature sensor) platform driver for Loongson-3. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: PCI: Add a hook for IORESOURCE_BUS in pci_controller/bridge_controllerJoshua Kinard
On SGI Origin 2k/Onyx2 and SGI Octane systems, there can exist multiple PCI buses attached to the Xtalk bus. The current code will stop counting PCI buses after it finds the first one. If one installs the optional PCI cardcage ("shoebox") into these systems, because of the order of the Xtalk widgets, the current PCI code will find the cardcage first, and fail to detect the BaseIO PCI devices, which are on a higher Xtalk widget ID. This patch adds the hooks needed for resolving this issue in the IP27 PCI code (in a later patch). Verified on both an SGI Onyx2 and an SGI Octane. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9074/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Use bool function return values of true/false not 1/0Joe Perches
Use the normal return values for bool functions Signed-off-by: Joe Perches <joe@perches.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9640/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Octeon: Reverse the order of register accesses to the FAUPaul Martin
64 bit access is unaffected but for 32 bit access, swap high and low words. Similarly for 16 bit access, reverse the order of the four possible words, and for 8 bit access reverse the order of byte accesses. Signed-off-by: Paul Martin <paul.martin@codethink.co.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9630/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Octeon: Turn hardware bitfields and structures inside out.Paul Martin
Although the proper way to do this for bitfields would be to use the macro that Ralf has provided, this is a little easier to understand as a diff. Signed-off-by: Paul Martin <paul.martin@codethink.co.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9628/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Add R16000 detectionJoshua Kinard
This allows the kernel to correctly detect an R16000 MIPS CPU on systems that have those. Otherwise, such systems will detect the CPU as an R14000, due to similarities in the CPU PRId value. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: SEAD3: New header file sead3-addr.h with hardware addresses.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: BMIPS: Flush the readahead cache after DMA.Ralf Baechle
BMIPS 3300/435x/438x CPUs have a readahead cache that is separate from the L1/L2. During a DMA operation, accesses adjacent to a DMA buffer may cause parts of the DMA buffer to be prefetched into the RAC. To avoid possible coherency problems, flush the RAC upon DMA completion. Derived from Kevin Cernekee's https://patchwork.linux-mips.org/patch/9602/. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: DMA: Implement platform hook to perform post-DMA cache flushes.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: ath25: Remove unused DMA helper functions.Ralf Baechle
These got merged with the ath25 support after 4e7f72660c39 (MIPS: Remove unnecessary platform dma helper functions) had already removed them for all other platforms. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-06 12:48:45 +0000