summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2010-01-28MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Streamline access to platform device registersDavid VomLehn
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Fix vmlinuz build for 32bit-only math shellsAlexander Clouter
POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Add support of LZO-compressed kernelsWu Zhangjin
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Ignore vmlinux.*Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Move vmlinux.ecoff to arch/mips/bootYoichi Yuasa
It moves to the same directory as the boot files in other formats. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: cpumask_of_node() should handle -1 as a nodeAnton Blanchard
pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Octeon: Use non-overflowing arithmetic in sched_clockDavid Daney
With typical mult and shift values, the calculation for Octeon's sched_clock overflows when using 64-bit arithmetic. Use 128-bit calculations instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Malta, PowerTV: Remove unnecessary "Linux started"Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/813/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.Yoichi Yuasa
Builtin cmdline is copied by arch_mem_init(). Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: AR7: Remove unused prom_getchar()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove extra r4k_clockevent_init() callDavid VomLehn
A call to r4k_clocksource_init() was added to plat_time_init(), but when init_mips_clock_source() calls the same function, boot fails in clockevents_register_device(). This patch removes the extraneous call. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Patchwork: http://patchwork.linux-mips.org/patch/803/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Cobalt use strlcat() for the command line argumentsYoichi Yuasa
Tested with CoLo v1.22 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Octeon: Add sched_clock() to csrc-octeon.cDavid Daney
With the advent of function graph tracing on MIPS, Octeon needs a high precision sched_clock() implementation. Without it, most timing numbers are reported as 0.000. This new sched_clock just uses the 64-bit cycle counter appropriately scaled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: TXx9: Cleanup builtin-cmdline processingAtsushi Nemoto
Since commit 898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) / 6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance built-in kernel command line") arcs_cmdline[] does not contain built-in command line. The commit introduce CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can use them instead of platform-specific built-in command line processing. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Patchwork: http://patchwork.linux-mips.org/patch/802/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/801/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused platform_die()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/800/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove mips_machine_halt()Yoichi Yuasa
mips_machine_halt() is same as mips_machine_restart(). Also delete the registration of _machine_halt and pm_power_off because mips_machine_halt() is the restart function. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/798/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused ptv_memsizeYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/799/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused prom_getcmdline()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/797/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: AR7: Remove kgdb_enabledYoichi Yuasa
An unused leftover from the old KGDB implementation. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/794/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Alchemy: Correct code taking the size of a pointerJulia Lawall
sizeof(dp) is just the size of the pointer. Change it to the size of the referenced structure. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Patchwork: http://patchwork.linux-mips.org/patch/789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.cFlorian Fainelli
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: VR41xx: Use strlcat() for the command line argumentsYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/784/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Cleanup and Fixup of compressed kernel supportWu Zhangjin
o Remove the .initrd section. The initrd section was already handled when vmlinux was linked. o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note sections. If .MIPS.options is not removed, kernels compiled with gcc 3.4.6 will not boot. o Clean up the file format. o Remove several other unneeded sections. Tested with GCC 3.4.6 and 4.4.1 with and without initrd. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/785/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Cleanup forgotten label_module_alloc in tlbex.cDavid Daney
commit c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp. e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left label_module_alloc unused. Remove it now. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-11mm: make totalhigh_pages unsigned longAndreas Fenkart
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits) MIPS: Lasat: Fix botched changes to sysctl code. RTC: rtc-cmos.c: Fix warning on MIPS MIPS: Cleanup random differences beween lmo and Linus' kernel. MIPS: No longer hardwire CONFIG_EMBEDDED to y MIPS: Fix and enhance built-in kernel command line MIPS: eXcite: Remove platform. MIPS: Loongson: Cleanups of serial port support MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer MIPS: Excite: move iodev_remove to .devexit.text MIPS: Lasat: Convert to proc_fops / seq_file MIPS: Cleanup signal code initialization MIPS: Modularize COP2 handling MIPS: Move EARLY_PRINTK to Kconfig.debug MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function MIPS: Yeeloong 2F: Add LID open event as the wakeup event MIPS: Yeeloong 2F: Add basic EC operations MIPS: Move several variables from .bss to .init.data MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5 MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer ...
2009-12-17Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: kill I_LOCK fold do_sync_file_range into sys_sync_file_range fix up O_SYNC comments VFS/fsstack: handle 32-bit smp + preempt + large files in fsstack_copy_inode_size fsstack/ecryptfs: remove unused get_nlinks param to fsstack_copy_attr_all vfs: remove extraneous NULL d_inode check from do_filp_open fs: no games with DCACHE_UNHASHED fs: anon_inodes implement dname dio: fix use-after-free
2009-12-17fix up O_SYNC commentsChristoph Hellwig
Proper Posix O_SYNC handling only made it into 2.6.33, not 2.6.32. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17Merge branch 'for-33' of git://repo.or.cz/linux-kbuildLinus Torvalds
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits) net: fix for utsrelease.h moving to generated gen_init_cpio: fixed fwrite warning kbuild: fix make clean after mismerge kbuild: generate modules.builtin genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}() score: add asm/asm-offsets.h wrapper unifdef: update to upstream revision 1.190 kbuild: specify absolute paths for cscope kbuild: create include/generated in silentoldconfig scripts/package: deb-pkg: use fakeroot if available scripts/package: add KBUILD_PKG_ROOTCMD variable scripts/package: tar-pkg: use tar --owner=root Kbuild: clean up marker net: add net_tstamp.h to headers_install kbuild: move utsrelease.h to include/generated kbuild: move autoconf.h to include/generated drop explicit include of autoconf.h kbuild: move compile.h to include/generated kbuild: drop include/asm kbuild: do not check for include/asm-$ARCH ... Fixed non-conflicting clean merge of modpost.c as per comments from Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h that needed to be changed to generated/autoconf.h)
2009-12-17MIPS: Lasat: Fix botched changes to sysctl code.Ralf Baechle
Commit 163931922220e4cb5effd5af1e105038c2f0ab7a "sysctl mips/lasat: Remove dead binary sysctl support" obviously wasn't test built ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Cleanup random differences beween lmo and Linus' kernel.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: No longer hardwire CONFIG_EMBEDDED to yMartin Michlmayr
There's no reason for MIPS to select EMBEDDED. In fact, EMBEDDED makes MIPS more awkward to deal with because it makes it different to the majority of architectures for no good reason. [Ralf: Historically disabling EMBEDDED had hid essential options for many MIPS platforms such as serial console and forced crap like VGA support or power managment enabled for platforms where those don't make any sense. The name of the option is also _very_ missleading so many users don't select it even where is was required for a functioning kernel.] Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/663/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Fix and enhance built-in kernel command lineDmitri Vorobiev
Currently, MIPS kernels silently overwrite kernel command-line parameters hardcoded in CONFIG_CMDLINE by the ones received from firmware. Therefore, using firmware remains the only reliable method to transfer the command-line parameters, which is not always desirable or convenient, and the CONFIG_CMDLINE option is thereby effectively rendered useless. This patch fixes the problem described above and introduces a more flexible scheme of handling the kernel command line, in a manner identical to what is currently used for x86. The default behavior, i.e. when CONFIG_CMDLINE_BOOL is not defined, retains the existing semantics, and firmware command-line arguments override the hardcoded ones. [Ralf: I fixed up all the defconfig files so the stay unaffected by this change.] Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/689/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: eXcite: Remove platform.Ralf Baechle
The platform has never been fully merged Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-17MIPS: Loongson: Cleanups of serial port supportWu Zhangjin
This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Suspend CS5536 MFGPT TimerWu Zhangjin
Before putting the Loongson 2F into wait mode, suspend the MFGPT Timer and after wake-up resume it. This may save some power. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Excite: move iodev_remove to .devexit.textUwe Kleine-König
The function iodev_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/710/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lasat: Convert to proc_fops / seq_fileAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: akpm@linux-foundation.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/725/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Cleanup signal code initializationRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/709/
2009-12-17MIPS: Modularize COP2 handlingRalf Baechle
Away with the daemons of ifdef; get ready for future COP2 users. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/708/
2009-12-17MIPS: Move EARLY_PRINTK to Kconfig.debugRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write functionWu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/683/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Add LID open event as the wakeup eventWu Zhangjin
Yeeloong 2F netbook has an KB3310B embedded controller to manage the LID action. When the LID is closed or opened a SCI interrupt is sent out and the corresponding event is saved to an EC register for later query. Allow the LID open interrupt to wake the processor from wait mode if it is in the suspend mode. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Add basic EC operationsWu Zhangjin
YeeLoong2F has a KB3310b embedded controller. Add basic operations for future related drivers and board support. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Move several variables from .bss to .init.dataDmitri Vorobiev
Several static uninitialized variables are used in the scope of __init functions but are themselves not marked as __initdata. This patch is to put those variables to where they belong and to reduce the memory footprint a little bit. Also, a couple of lines with spaces instead of tabs were fixed. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/698/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Make function graph tracer work with -mmcount-ra-addressWu Zhangjin
That thread "MIPS: Add option to pass return address location to _mcount" from "David Daney <ddaney@caviumnetworks.com>" have added a new option -mmcount-ra-address to gcc(4.5) for MIPS to transfer the location of the return address to _mcount. Benefit from this new feature, function graph tracer on MIPS will be easier and safer to hijack the return address of the kernel function, which will save some overhead and make the whole thing more reliable. In this patch, at first, try to enable the option -mmcount-ra-address in arch/mips/Makefile with cc-option, if gcc support it, it will be enabled, otherwise, no side effect. and then, we need to support this new option of gcc 4.5 and also support the old gcc versions. with _mcount in the old gcc versions, it's not easy to get the location of return address(tracing: add function graph tracer support for MIPS), so, we do it in a C function: ftrace_get_parent_addr(ftrace.c), but with -mmcount-ra-address, only several instructions need to get what we want, so, I put into asm(mcount.S). and also, as the $12(t0) is used by -mmcount-ra-address for transferring the localtion of return address to _mcount, we need to save it into the stack and restore it when enabled dynamic function tracer, 'Cause we have called "ftrace_call" before "ftrace_graph_caller", which may destroy $12(t0). (Thanks to David for providing that -mcount-ra-address and giving the idea of KBUILD_MCOUNT_RA_ADDRESS, both of them have made the whole thing more beautiful!) Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/681/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5Wu Zhangjin
A new option -mmcount-ra-address for gcc 4.5 have been sent by David Daney <ddaney@caviumnetworks.com> in the thread "MIPS: Add option to pass return address location to _mcount", which help to record the location of the return address(ra) for the function graph tracer of MIPS to hijack the return address easier and safer. that option used the $12(t0) register by default, so, we reserve it for it, and use t1,t2,t3 instead of t0,t1,t2. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/680/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointerWu Zhangjin
When remove the -fno-omit-frame-pointer, gcc will not save the frame pointer for us, we need to save one ourselves. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 17:42:51 +0000