summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2015-02-20MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUsDavid Daney
The wide multiplier is twice as wide, so we need to save twice as much state. Detect the multiplier type (CPU type) at start up and install model specific handlers. [aleksey.makarov@auriga.com: conflict resolution, support for old compilers] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8933/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: boot: Provide more uImage optionsMarkos Chandras
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.hDavid Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: ip22-gio: Remove legacy suspend/resume supportLars-Peter Clausen
There are currently no gio device drivers that implement suspend/resume and this patch removes the bus specific legacy suspend and resume callbacks. This will allow us to eventually remove struct bus_type legacy suspend and resume support altogether. gio device drivers wanting to implement suspend and resume can use dev PM ops which will work out of the box without further modifications necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20mips: pci: Add ifdef around pci_proc_domainZubair Lutfullah Kakakhel
Without these, there are multiple definitions of pci_proc_domain() and pci_domain_nr() if linux/pci.h and asm/pci.h are included. Add #ifdefs around them Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Markos.Chandras@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: Fix cpu clock calculationManuel Lauss
The current code uses bits 0-6 of the sys_cpupll register to calculate core clock speed. However this is only valid on Au1300, on all earlier models the hardware only uses bits 0-5 to generate core clock. This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll is set as well, which ultimately lead the code to calculate a bogus cpu core clock and also uart base clock down the line. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reported-by: John Crispin <blogic@openwrt.org> Tested-by: Bruno Randolf <br1@einfach.org> Cc: stable@vger.kernel.org [v3.17+] Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9279/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: remove declaration for set_cpuspecManuel Lauss
set_cpuspec() has been dropped with commit 074cf656700ddd1d2bd7f815f78e785418beb898 ("MIPS: Alchemy: remove cpu_table.") in late 2008. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: preset loops_per_jiffy based on CPU clockManuel Lauss
This was lost during the rewrite of clock framework support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: fix Au1000/Au1500 LRCLK calculationManuel Lauss
The Au1000 and Au1500 calculate the LRCLK a bit differently than newer models: a single bit in MEM_STCFG0 selects if pclk is divided by 4 or 5. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9148/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Add set/clear CP0 macros for PageGrain registerSteven J. Hill
Build set and clear macros for the PageGrain register. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Usage and cosmetic cleanups of page table bits.Steven J. Hill
* Clean up white spaces and tabs. * Get rid of remaining hardcoded values for calculating shifts and masks. * Get rid of redundant macro values. * Do not use page table bits directly in #ifdef's. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-19Merge branch 'mipsr6-for-3.20' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next
2015-02-19MIPS: Export MSA functions used by lose_fpu(1) for KVMJames Hogan
Export the _save_msa asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m and CONFIG_CPU_HAS_MSA=y due to commit f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined! Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest) Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/9261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Export FP functions used by lose_fpu(1) for KVMJames Hogan
Export the _save_fp asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m due to commit f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined! Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/9260/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: BCM3384: Fix outdated use of mips_cpu_intc_init()Kevin Cernekee
This function was renamed to mips_cpu_irq_of_init(), so fix it to avoid a compile error. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8834/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Provide correct siginfo_t.si_stimePetr Malat
Provide correct siginfo_t.si_stime on MIPS64 Bug description: MIPS version of copy_siginfo() is not aware of alignment on platforms with 64-bit long integers, which leads to an incorrect si_stime passed to signal handlers, because the last element (si_stime) of _sifields._sigchld is not copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of 4 * sizeof(int). Patch description: Use the generic copy_siginfo, which doesn't have this problem. Signed-off-by: Petr Malat <oss@malat.biz> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8671/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGSMarkos Chandras
We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Makefile: Pass -march option on Loongson3A coresRalf Baechle
The loongson 3A cores do not select a suitable -march option so the build system uses the default one from the toolchain. This may or may not be suitable for a loongson 3A build. In order to avoid that, we explicitly set a suitable -march option for that core. Furthermore, some very old compilers don't support -march= at all and there is the possibility of toolchain combinations such as GCC 4.9 and binutils 2.24 for which -march=loongson3a will result in MIPS64 R2 code being generated but then rejected by GAS. So treat the Longsoon 3A as an R2 CPU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-18MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detrTomeu Vizoso
They were added to this function by mistake when they were added to the clk_ops.determine_rate callback. Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks") Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-17MIPS: Add Malta QEMU 32R6 defconfigMarkos Chandras
Add a Malta defconfig for the 32-bit MIPS R6 core as emulated by QEMU. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Malta: Add support for building MIPS R6 kernelMarkos Chandras
The Malta platform supports MIPS R6 (via QEMU or real bitstreams) so add support for it. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: elf: Improve the overall ABI and FPU mode checksMarkos Chandras
The previous implementation did not cover all possible FPU combinations and it silently allowed ABI incompatible objects to be loaded with the wrong ABI. For example, the previous logic would set the FP_64 ABI as the matching ABI for an FP_XX object combined with an FP_64A object. This was wrong, and the matching ABI should have been FP_64A. The previous logic is now replaced with a new one which determines the appropriate FPU mode to be used rather than the FP ABI. This has the advantage that the entire logic is much simpler since it is the FPU mode we are interested in rather than the FP ABI resulting to code simplifications. This also removes the now obsolete FP32XX_HYBRID_FPRS option. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6Markos Chandras
MIPS32 R6 has a 64-bit FPU so add the necessary MIPS R6 definition. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: process: Do not allow FR=0 on MIPS R6Markos Chandras
A prctl() call to set FR=0 for MIPS R6 should not be allowed since FR=1 is the only option for R6 cores. Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Handle MIPS IV, V and R2 FPU instructions on MIPS R6 as wellMarkos Chandras
MIPS R2 FPU instructions are also present in MIPS R6 so amend the preprocessor definitions to take MIPS R6 into consideration. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Make use of the ERETNC instruction on MIPS R6Markos Chandras
The ERETNC instruction, introduced in MIPS R5, is similar to the ERET one, except it does not clear the LLB bit in the LLADDR register. This feature is necessary to safely emulate R2 LL/SC instructions. However, on context switches, we need to clear the LLAddr/LLB bit in order to make sure that an SC instruction from the new thread will never succeed if it happens to interrupt an LL operation on the same address from the previous thread. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6Leonid Yegoshin
MIPS R6 removed quite a few R2 instructions. However, there is plenty of <R6 userland code so we add an in-kernel emulator so we can still be able to execute all R2 userland out there. The emulator comes with a handy debugfs under /mips/ directory (r2-emul-stats) to provide some basic statistics of the instructions that are being emulated. Below are some statistics from booting a minimal buildroot image: Instruction Total BDslot ------------------------------ movs 236969 0 hilo 56686 0 muls 55279 0 divs 10941 0 dsps 0 0 bops 1 0 traps 0 0 fpus 0 0 loads 214981 17 stores 103364 0 llsc 56898 0 dsemul 150418 0 jr 370158 bltzl 43 bgezl 1594 bltzll 0 bgezll 0 bltzal 39 bgezal 39 beql 14503 bnel 138741 blezl 0 bgtzl 3988 Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: mipsregs: Add support for the LLADDR registerMarkos Chandras
If Config5/LLB is set in the core, then software can write the LLB bit in the LLADDR register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Add LLB bit and related feature for the Config 5 CP0 registerMarkos Chandras
The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructionsMarkos Chandras
MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BEQZC and JIC instructionsMarkos Chandras
MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BALC instructionMarkos Chandras
MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BNVC, BNEC and BNEZLAC instructionsMarkos Chandras
MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and BNEZLAC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructionsMarkos Chandras
MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and BEQZALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 branch compact (BC) instructionMarkos Chandras
MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructionsMarkos Chandras
MIPS R6 added the following four instructions which share the BGTZ and BGTZL opcode: BLTZALC: Compact branch-and-link if GPR rt is < to zero BGTZALC: Compact branch-and-link if GPR rt is > to zero BLTZL : Compact branch if GPR rt is < to zero BGTZL : Compact branch if GPR rt is > to zero BLTC : Compact branch if GPR rs is less than GPR rt BLTUC : Similar to BLTC but unsigned Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 B{L,G}Ε{Z,}{AL,}C instructionsMarkos Chandras
MIPS R6 added the following four instructions which share the BLEZ and BLEZL opcodes: BLEZALC: Compact branch-and-link if GPR rt is <= to zero BGEZALC: Compact branch-and-link if GPR rt is >= to zero BLEZC : Compact branch if GPR rt is <= to zero BGEZC : Compact branch if GPR rt is >= to zero BGEC : Compact branch if GPR rs is less than or equal to GPR rt BGEUC : Similar to BGEC but unsigned. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the BC1{EQ,NE}Z FPU instructionsMarkos Chandras
MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6Markos Chandras
MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6Markos Chandras
The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: scache: Add secondary cache support for MIPS R6 coresMarkos Chandras
The secondary cache initialization and configuration code is processor specific so we need to handle MIPS R6 cores as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: c-r4k: Set the correct ISA levelMarkos Chandras
The local_r4k_flush_cache_sigtramp function uses the 'cache' instruction inside an asm block. However, MIPS R6 changed the opcode for the cache instruction and as a result of which we need to set the correct ISA level. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: tlbex: Use cpu_has_mips_r2_exec_hazard for the EHB instructionLeonid Yegoshin
MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the EHB instruction is available or not. This is necessary for MIPS R6 which also supports the EHB instruction. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: page: Add MIPS R6 supportMarkos Chandras
The MIPS R6 pref instruction only has 9 bits for the immediate field so skip the micro-assembler PREF instruction if the offset does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is no longer valid in MIPS R6, so we change the default for all MIPS R6 processors to bit 5 (Pref_StoreStreamed). Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: lib: memset: Add MIPS R6 supportLeonid Yegoshin
MIPS R6 dropped the unaligned load and store instructions so we need to re-write this part of the code for R6 to store one byte at a time. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: lib: memcpy: Add MIPS R6 supportLeonid Yegoshin
MIPS R6 does not support the unaligned load and store instructions so we add a special MIPS R6 case to copy one byte at a time if we need to read/write to unaligned memory addresses. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: syscall: Set the appropriate ISA level for MIPS R6Markos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: unaligned: Add support for the MIPS R6Leonid Yegoshin
The load/store unaligned instructions have been removed in MIPS R6 so we need to re-implement the related macros using the regular load/store instructions. Moreover, the load/store from coprocessor 2 instructions have been reallocated in Release 6 so we will handle them in the emulator instead. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 17:38:56 +0000