summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2025-07-16mips: remove unused function mc146818_set_rtc_mmssMateusz Jończyk
I have checked carefully: this function is unused, so remove it. The last caller appears to have been removed in 2007 in commit 4b550488f894 ("[MIPS] Deforest the function pointer jungle in the time code.") mc146818-time.h is included only in three files: - arch/mips/mti-malta/malta-time.c - arch/mips/loongson64/numa.c - arch/mips/loongson2ef/common/time.c Also, remove unused macros USEC_AFTER/USEC_BEFORE. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: CPS: Optimise delay CPU calibration for SMPGregory CLEMENT
On MIPS architecture with CPS-based SMP support, all CPU cores in the same cluster run at the same frequency since they share the same L2 cache, requiring a fixed CPU/L2 cache ratio. This allows to implement calibrate_delay_is_known(), which will return 0 (triggering calibration) only for the primary CPU of each cluster. For other CPUs, we can simply reuse the value from their cluster's primary CPU core. With the introduction of this patch, a configuration running 32 cores spread across two clusters sees a significant reduction in boot time by approximately 600 milliseconds. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: CPS: Improve mips_cps_first_online_in_cluster()Gregory CLEMENT
The initial implementation of this function goes through all the CPUs in a cluster to determine if the current CPU is the only one running. This process occurs every time the function is called. However, during boot, we already perform this task, so let's take advantage of this opportunity to create and fill a CPU bitmask that can be easily and efficiently used later. This patch modifies the function to allow providing the first available online CPU when one already exists, which is necessary for delay CPU calibration optimization. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: disable MMID when not supported by the hardwareGregory CLEMENT
It is possible that MMID is supported at the CPU level, but its integration in a SoC prevents its usage. For instance, if the System-level Interconnect (also known as Network on Chip) does not support global invalidation, then the MMID feature is not usable. The current implementation of MMID relies on the GINV* instructions. This patch allows the disabling of MMID based on a device tree property, as this issue cannot be detected at runtime. MMID is set up very early during the boot process, even before device tree data can be accessed. Therefore, when we determine whether MMID needs to be disabled, some MMID setup has already been performed for the boot CPU. Consequently, we must revert the MMID setup on the first CPU before disabling the feature for the subsequent CPUs that will be initialized later. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driverThéo Lebrun
Enable I2C support on the EyeQ5 platform. The evaluation board has a temperature sensor mounted which helps test the integration. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: eyeq5_defconfig: add GPIO subsystem & driverThéo Lebrun
Enable GPIO support on the EyeQ5 platform. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: mobileye: eyeq5: add two GPIO bank nodesThéo Lebrun
This platform uses the same GPIO controller as Nomadik. It however has its own pinconf & pinmux controller. EyeQ5 is the first platform to use gpio-nomadik independently from pinctrl-nomadik. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: mobileye: eyeq5: add evaluation board I2C temp sensorThéo Lebrun
Declare the temperature sensor on I2C bus 2. Its label is the schematics identifier. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: mobileye: eyeq5: add 5 I2C controller nodesThéo Lebrun
Add the SoC I2C controller nodes to the platform devicetree. Use a default bus frequency of 400kHz. They are AMBA devices that are matched on PeriphID. Set transfer timeout to 10ms instead of Linux's default of 200ms. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: eyeq5_defconfig: Update for v6.16-rc1Théo Lebrun
- Sort by moving CONFIG_PAGE_SIZE_16KB=y. - Drop CONFIG_MACH_EYEQ5=y because it is the default: # arch/mips/mobileye/Kconfig choice prompt "Mobileye EyeQ SoC selection" default MACH_EYEQ5 - Drop CONFIG_SPARSEMEM_MANUAL=y because: # mm/Kconfig choice prompt "Memory model" depends on SELECT_MEMORY_MODEL default SPARSEMEM_MANUAL if ARCH_SPARSEMEM_DEFAULT default FLATMEM_MANUAL # arch/mips/Kconfig config EYEQ select ARCH_SPARSEMEM_DEFAULT if 64BIT Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-16MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}Shiji Yang
These functions are exported but their prototypes are not defined. This patch adds the missing function prototypes to fix the following compilation warnings: arch/mips/kernel/vpe-mt.c:180:7: error: no previous prototype for 'vpe_alloc' [-Werror=missing-prototypes] 180 | void *vpe_alloc(void) | ^~~~~~~~~ arch/mips/kernel/vpe-mt.c:198:5: error: no previous prototype for 'vpe_start' [-Werror=missing-prototypes] 198 | int vpe_start(void *vpe, unsigned long start) | ^~~~~~~~~ arch/mips/kernel/vpe-mt.c:208:5: error: no previous prototype for 'vpe_stop' [-Werror=missing-prototypes] 208 | int vpe_stop(void *vpe) | ^~~~~~~~ arch/mips/kernel/vpe-mt.c:229:5: error: no previous prototype for 'vpe_free' [-Werror=missing-prototypes] 229 | int vpe_free(void *vpe) | ^~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-15mips: loongson3_defconfig: Update HD-audio configsTakashi Iwai
Since the reorganization of HD-audio drivers, Realtek driver has been split. Update to the new Kconfigs to catch up. Fixes: aeeb85f26c3b ("ALSA: hda: Split Realtek HD-audio codec driver") Link: https://patch.msgid.link/20250715075237.28476-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-07-14MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note namesDave Martin
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: linux-mips@vger.kernel.org Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-12-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org>
2025-07-14lib/crypto: mips/sha1: Migrate optimized code into libraryEric Biggers
Instead of exposing the mips-optimized SHA-1 code via mips-specific crypto_shash algorithms, instead just implement the sha1_blocks() library function. This is much simpler, it makes the SHA-1 library functions be mips-optimized, and it fixes the longstanding issue where the mips-optimized SHA-1 code was disabled by default. SHA-1 still remains available through crypto_shash, but individual architectures no longer need to handle it. Note: to see the diff from arch/mips/cavium-octeon/crypto/octeon-sha1.c to lib/crypto/mips/sha1.h, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250712232329.818226-10-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org>
2025-07-13mm/hugetlb: remove prepare_hugepage_range()Peter Xu
Only mips and loongarch implemented this API, however what it does was checking against stack overflow for either len or addr. That's already done in arch's arch_get_unmapped_area*() functions, even though it may not be 100% identical checks. For example, for both of the architectures, there will be a trivial difference on how stack top was defined. The old code uses STACK_TOP which may be slightly smaller than TASK_SIZE on either of them, but the hope is that shouldn't be a problem. It means the whole API is pretty much obsolete at least now, remove it completely. Link: https://lkml.kernel.org/r/20250627160707.2124580-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Muchun Song <muchun.song@linux.dev> Cc: Jann Horn <jannh@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-07-10Merge tag 'nf-next-25-07-10' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next (v2) The following series contains an initial small batch of Netfilter updates for net-next: 1) Remove DCCP conntrack support, keep DCCP matches around in order to avoid breakage when loading ruleset, add Kconfig to wrap the code so it can be disabled by distributors. 2) Remove buggy code aiming at shrinking netlink deletion event, then re-add it correctly in another patch. This is to prevent -stable to pick up on a fix that breaks old userspace. From Phil Sutter. 3) Missing WARN_ON_ONCE() to check for lockdep_commit_lock_is_held() to uncover bugs. From Fedor Pchelkin. * tag 'nf-next-25-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: adjust lockdep assertions handling netfilter: nf_tables: Reintroduce shortened deletion notifications netfilter: nf_tables: Drop dead code from fill_*_info routines netfilter: conntrack: remove DCCP protocol support ==================== Link: https://patch.msgid.link/20250710010706.2861281-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08af_unix: Introduce SO_INQ.Kuniyuki Iwashima
We have an application that uses almost the same code for TCP and AF_UNIX (SOCK_STREAM). TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an alternative. Let's introduce the generic version of TCP_INQ. If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that contains the exact value of ioctl(SIOCINQ). The cmsg is also included when msg->msg_get_inq is non-zero to make sockets io_uring-friendly. Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to override setsockopt() for SOL_SOCKET. By having the flag in struct unix_sock, instead of struct sock, we can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq. Note also that supporting custom getsockopt() for SOL_SOCKET will need preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP). Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-04lib/crypto: sha256: Consolidate into single moduleEric Biggers
Consolidate the CPU-based SHA-256 code into a single module, following what I did with SHA-512: - Each arch now provides a header file lib/crypto/$(SRCARCH)/sha256.h, replacing lib/crypto/$(SRCARCH)/sha256.c. The header defines sha256_blocks() and optionally sha256_mod_init_arch(). It is included by lib/crypto/sha256.c, and thus the code gets built into the single libsha256 module, with proper inlining and dead code elimination. - sha256_blocks_generic() is moved from lib/crypto/sha256-generic.c into lib/crypto/sha256.c. It's now a static function marked with __maybe_unused, so the compiler automatically eliminates it in any cases where it's not used. - Whether arch-optimized SHA-256 is buildable is now controlled centrally by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain the same as before, and it remains enabled by default. - Any additional arch-specific translation units for the optimized SHA-256 code (such as assembly files) are now compiled by lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250630160645.3198-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org>
2025-07-04lib/crypto: sha256: Remove sha256_is_arch_optimized()Eric Biggers
Remove sha256_is_arch_optimized(), since it is no longer used. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250630160645.3198-12-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org>
2025-07-04lib/crypto: sha256: Propagate sha256_block_state type to implementationsEric Biggers
The previous commit made the SHA-256 compression function state be strongly typed, but it wasn't propagated all the way down to the implementations of it. Do that now. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250630160645.3198-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org>
2025-07-03netfilter: conntrack: remove DCCP protocol supportPablo Neira Ayuso
The DCCP socket family has now been removed from this tree, see: 8bb3212be4b4 ("Merge branch 'net-retire-dccp-socket'") Remove connection tracking and NAT support for this protocol, this should not pose a problem because no DCCP traffic is expected to be seen on the wire. As for the code for matching on dccp header for iptables and nftables, mark it as deprecated and keep it in place. Ruleset restoration is an atomic operation. Without dccp matching support, an astray match on dccp could break this operation leaving your computer with no policy in place, so let's follow a more conservative approach for matches. Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP as deprecated too and also set it to 'n' by default. Code to match on DCCP protocol from ebtables also remains in place, this is just a few checks on IPPROTO_DCCP from _check() path which is exercised when ruleset is loaded. There is another use of IPPROTO_DCCP from the _check() path in the iptables multiport match. Another check for IPPROTO_DCCP from the packet in the reject target is also removed. So let's schedule removal of the dccp matching for a second stage, this should not interfer with the dccp retirement since this is only matching on the dccp header. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-07-03mips: boot: use 'targets' instead of extra-y in MakefileMasahiro Yamada
vmlinux.bin.* files are built as prerequisites of other objects. There is no need to use extra-y, which is planned for deprecation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: Don't crash in stack_top() for tasks without ABI or vDSOThomas Weißschuh
Not all tasks have an ABI associated or vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL ABI pointer and crash. This can for example happen when using kunit: mips_stack_top+0x28/0xc0 arch_pick_mmap_layout+0x190/0x220 kunit_vm_mmap_init+0xf8/0x138 __kunit_add_resource+0x40/0xa8 kunit_vm_mmap+0x88/0xd8 usercopy_test_init+0xb8/0x240 kunit_try_run_case+0x5c/0x1a8 kunit_generic_run_threadfn_adapter+0x28/0x50 kthread+0x118/0x240 ret_from_kernel_thread+0x14/0x1c Only dereference the ABI point if it is set. The GIC page is also included as it is specific to the vDSO. Also move the randomization adjustment into the same conditional. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03mips: dts: qca: add wmac supportRosen Penev
Now that OF ahb support was added to the ath9k driver, we can use it to enable and use the SoC wireless found in these chipsets. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: eyeq5_defconfig: add cadence MMC/SDHCI driverBenoît Monin
Enable MMC support on eyeQ5 platform so it can be used as the root partition. Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: mobileye: dts: eyeq5: add the emmc controllerBenoît Monin
Add the MMC/SDHCI controller found in the eyeQ5 SoC. It is based on the cadence sd4hc controller and support modes up to HS400 enhanced strobe. Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: eyeq6_defconfig: add cadence MMC/SDHCI driverBenoît Monin
Enable MMC support on eyeQ6 platform so it can be used as the root partition. Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: mobileye: dts: eyeq6h: add the emmc controllerBenoît Monin
Add the MMC/SDHCI controller found in the eyeQ6 SoC. It is based on the cadence sd4hc controller and support modes up to HS400 enhanced strobe. Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: falcon: sysctrl: fix request memory check logicShiji Yang
request_mem_region() will return NULL instead of error code when the memory request fails. Therefore, we should check if the return value is non-zero instead of less than zero. In this way, this patch also fixes the build warnings: arch/mips/lantiq/falcon/sysctrl.c:214:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 214 | res_status.name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:216:47: error: ordered comparison of pointer with integer zero [-Werror=extra] 216 | res_ebu.name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:219:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 219 | res_sys[0].name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:222:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 222 | res_sys[1].name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:225:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 225 | res_sys[2].name) < 0)) | Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: falcon: sysctrl: add missing header prom.hShiji Yang
"prom.h" includes the prototype of ltq_soc_init(). Fix warning: arch/mips/lantiq/falcon/sysctrl.c:185:13: error: no previous prototype for 'ltq_soc_init' [-Werror=missing-prototypes] 185 | void __init ltq_soc_init(void) | ^~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: falcon: sysctrl: remove unused falcon_trigger_hrst()Shiji Yang
This is a defined but unused function. Fix warning: arch/mips/lantiq/falcon/sysctrl.c:75:6: error: no previous prototype for 'falcon_trigger_hrst' [-Werror=missing-prototypes] 75 | void falcon_trigger_hrst(int level) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: falcon: fix misc missing-prototypes warningsShiji Yang
Fix the following build warnings: arch/mips/lantiq/falcon/prom.c:39:13: error: no previous prototype for 'ltq_soc_nmi_setup' [-Werror=missing-prototypes] 39 | void __init ltq_soc_nmi_setup(void) | ^~~~~~~~~~~~~~~~~ arch/mips/lantiq/falcon/prom.c:46:13: error: no previous prototype for 'ltq_soc_ejtag_setup' [-Werror=missing-prototypes] 46 | void __init ltq_soc_ejtag_setup(void) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: xway: add prototype for ltq_get_cp1_base()Shiji Yang
ltq_get_cp1_base() is an exported function, we must define its prototype on header file. Fix warning: arch/mips/lantiq/xway/vmmc.c:22:15: error: no previous prototype for 'ltq_get_cp1_base' [-Werror=missing-prototypes] 22 | unsigned int *ltq_get_cp1_base(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: xway: gptu: mark gptu_init() as staticShiji Yang
Fix the following missing-prototypes warning: arch/mips/lantiq/xway/gptu.c:197:12: error: no previous prototype for 'gptu_init' [-Werror=missing-prototypes] 197 | int __init gptu_init(void) | ^~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-03MIPS: lantiq: xway: mark ltq_ar9_sys_hz() as staticShiji Yang
Fix the following missing-prototypes warning: arch/mips/lantiq/xway/clk.c:77:15: error: no previous prototype for 'ltq_ar9_sys_hz' [-Werror=missing-prototypes] 77 | unsigned long ltq_ar9_sys_hz(void) | ^~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02fs: introduce file_getattr and file_setattr syscallsAndrey Albershteyn
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-07-02MIPS: lantiq: irq: fix misc missing-prototypes warningsShiji Yang
Fix the following build warnings: arch/mips/lantiq/irq.c:340:12: error: no previous prototype for 'icu_of_init' [-Werror=missing-prototypes] 340 | int __init icu_of_init(struct device_node *node, struct device_node *parent) | ^~~~~~~~~~~ arch/mips/lantiq/irq.c:418:5: error: no previous prototype for 'get_c0_perfcount_int' [-Werror=missing-prototypes] 418 | int get_c0_perfcount_int(void) | ^~~~~~~~~~~~~~~~~~~~ arch/mips/lantiq/irq.c:424:14: error: no previous prototype for 'get_c0_compare_int' [-Werror=missing-prototypes] 424 | unsigned int get_c0_compare_int(void) | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: lantiq: xway: mark dcdc_init() as staticShiji Yang
Fix the following missing-prototypes build warning: arch/mips/lantiq/xway/dcdc.c:49:12: error: no previous prototype for 'dcdc_init' [-Werror=missing-prototypes] 49 | int __init dcdc_init(void) | ^~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: pci: lantiq: marks pcibios_init() as staticShiji Yang
Fix the following missing-prototypes build warning: arch/mips/pci/pci-lantiq.c:239:12: error: no previous prototype for 'pcibios_init' [-Werror=missing-prototypes] 239 | int __init pcibios_init(void) | ^~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: lantiq: xway: mark dma_init() as staticShiji Yang
Fix the following missing-prototypes build warning: arch/mips/lantiq/xway/dma.c:293:1: error: no previous prototype for 'dma_init' [-Werror=missing-prototypes] 293 | dma_init(void) | ^~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS/Loongson: Fix build warnings about export.hHuacai Chen
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1"), we get some build warnings with W=1: arch/mips/loongson64/setup.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present So fix these build warnings for MIPS/Loongson. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: txx9: Constify bin_attribute arguments of txx9_sram_{read,write}()Geert Uytterhoeven
If CONFIG_MACH_TX49XX=y: arch/mips/txx9/generic/setup.c: In function ‘txx9_sramc_init’: arch/mips/txx9/generic/setup.c:839:32: error: assignment to ‘ssize_t (*)(struct file *, struct kobject *, const struct bin_attribute *, char *, loff_t, size_t)’ {aka ‘long int (*)(struct file *, struct kobject *, const struct bin_attribute *, char *, long long int, long unsigned int)’} from incompatible pointer type ‘ssize_t (*)(struct file *, struct kobject *, struct bin_attribute *, char *, loff_t, size_t)’ {aka ‘long int (*)(struct file *, struct kobject *, struct bin_attribute *, char *, long long int, long unsigned int)’} [-Werror=incompatible-pointer-types] 839 | dev->bindata_attr.read = txx9_sram_read; | ^ arch/mips/txx9/generic/setup.c:840:33: error: assignment to ‘ssize_t (*)(struct file *, struct kobject *, const struct bin_attribute *, char *, loff_t, size_t)’ {aka ‘long int (*)(struct file *, struct kobject *, const struct bin_attribute *, char *, long long int, long unsigned int)’} from incompatible pointer type ‘ssize_t (*)(struct file *, struct kobject *, struct bin_attribute *, char *, loff_t, size_t)’ {aka ‘long int (*)(struct file *, struct kobject *, struct bin_attribute *, char *, long long int, long unsigned int)’} [-Werror=incompatible-pointer-types] 840 | dev->bindata_attr.write = txx9_sram_write; | ^ Fixes: 97d06802d10a2827 ("sysfs: constify bin_attribute argument of bin_attribute::read/write()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: pci-rt2880: make pcibios_init() staticMieczyslaw Nalewaj
This function is only used in the current source file. Mark it as static to fix the compilation error: arch/mips/pci/pci-rt2880.c:267:12: error: no previous prototype for 'pcibios_init' [-Werror=missing-prototypes] 267 | int __init pcibios_init(void) | ^~~~~~~~~~~~ Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: ralink: add missing header includeMieczyslaw Nalewaj
Add the missing header "asm/time.h" which defines the function prototypes of get_c0_perfcount_int() and get_c0_compare_int(). This patch fixes the following build warnings: arch/mips/ralink/irq.c:86:5: error: no previous prototype for 'get_c0_perfcount_int' [-Werror=missing-prototypes] 86 | int get_c0_perfcount_int(void) | ^~~~~~~~~~~~~~~~~~~~ arch/mips/ralink/irq.c:92:14: error: no previous prototype for 'get_c0_compare_int' [-Werror=missing-prototypes] 92 | unsigned int get_c0_compare_int(void) | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02mips: dts: realtek: Add gpio blockChris Packham
The RTL9300 has a block of GPIOs included in the SoC. Add these to the devicetree. This is taken from openwrt[1] the differences are removing the unnecessary second cell from the interrupt and removing the -controller from the node name to conform to the dtschema. [1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/dts/rtl930x.dtsi Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02mips: dts: realtek: Add watchdogChris Packham
The RTL9300 has an integrated watchdog. Add this to the devicetree. This is taken from openwrt[1] the only difference is removing the unnecessary second cell from the interrupts. [1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/dts/rtl930x.dtsi Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02mips: dts: realtek: Add switch interruptsChris Packham
Add interrupts for the rtl9301-switch. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02mips: dts: cameo-rtl9302c: Add switch blockChris Packham
Add the switch port and phys to the cameo-rtl9302c-2x-rtl8224-2xge board. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: dts: ralink: gardena_smart_gateway_mt7688: Fix power LEDEzra Buehler
When starting up, the GARDENA smart Gateway's power LED should be flashing green. It is unclear why it was initially set to "off". The LED frequency cannot be configured in the devicetree. Luckily, the default is 1 Hz, which is what we want. Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-07-02MIPS: dts: ralink: mt7628a: Update watchdog node according to bindingsEzra Buehler
Most notably, add the mediatek,sysctl phandle and remove the redundant reset/interrupt-related properties from the watchdog node. This is in line with the corresponding devicetree (mt7628an.dtsi) used by the OpenWrt project. This has been tested on the MT7688-based GARDENA smart Gateway. Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-24 17:36:06 +0000