summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs
AgeCommit message (Collapse)Author
2009-11-11powerpc: pasemi_defconfig updateOlof Johansson
pasemi_defconfig hasn't been updated for a year. Mostly a refresh of defaults, but this also disables 64K pages. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-05powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala
Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xxKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-28Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-10-27powerpc: Add a Book-3E 64-bit defconfigKumar Gala
This defconfig's purpose at this time is to help catch compile errors between Book-3S and Book-3E support in ppc64. It is based on the ppc64_defconfig with some things disabled that we dont support on Book-3E right now (hugetlbfs, slices, etc.) Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-15powerpc/5200: Update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15mpc5200: support for the MAN mpc5200 based board mucmc52Heiko Schocher
- serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - IDE support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-09-15Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
2009-08-31powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.fkan@amcc.com
This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Acked-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31powerpc/44x: Update Arches defconfigStefan Roese
This patch adds NOR MTD support and I2C HWMON support for the AD7414 to the AMCC Arches defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-27powerpc/ps3: Update ps3_defconfigGeoff Levand
Update ps3_defconfig. o Refresh for 2.6.31. o Remove MTD support. o Add more HID drivers. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-24powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storagePaul Gortmaker
With flash partition entries in the DTS file, MTD might as well be enabled in the defconfig. In a similar vein, enable USB and enough related options (SCSI/ext2/ext3) so that a user can read and write to a generic USB flash drive as well. Also, this board only has the two default SOC UARTs, so adjust the UART config accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24powerpc/85xx: Add support for P2020RDB boardPoonam Aggrwal
Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24powerpc/82xx: mgcoge - updated defconfigHeiko Schocher
- add I2C support - add FCC1 and FCC2 support Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-20powerpc/40x: Update kilauea defconfig to support NAND, RTC and HWMONStefan Roese
This patch adds support for the following devices to the Kilauea defconfig file: - PPC4xx NAND controller (NDFC) - I2C RTC (Dallas DS1338) - I2C HWMON (Dallas DS1775) Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/44x: Update Canyonlands defconfig to support NOR, NAND and RTCStefan Roese
This patch adds support for the following devices to the Canyonlands defconfig file: - NOR FLASH - PPC4xx NAND controller (NDFC) - I2C RTC (M41T80) Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-29powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update GE Fanuc sbc310 default configurationMartyn Welch
General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update defconfig for GE Fanuc's PPC9AMartyn Welch
General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-06powerpc/44x: Update Warp defconfigSean MacLennan
* Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-17Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-06-16Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: therm_windtunnel: Convert to a new-style i2c driver therm_adt746x: Convert to a new-style i2c driver windfarm: Convert to new-style i2c drivers therm_pm72: Convert to a new-style i2c driver i2c-viapro: Add new PCI device ID for VX855 i2c/chips: Move max6875 to drivers/misc/eeprom i2c: Do not give adapters a default parent i2c: Do not probe for TV chips on Voodoo3 adapters i2c: Retry automatically on arbitration loss i2c: Remove void casts
2009-06-15powerpc/85xx: Add defconfig for X-ES MPC85xx boardsNate Case
Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-1583xx: add support for the kmeter1 board.Heiko Schocher
The following series implements basic board support for the kmeter1 board from keymile, based on a MPC8360. This series provides the following functionality: - The board can boot with a serial console on UART1 - Ethernet: UCC1 in RGMII mode UCC2 in RGMII mode UCC4 in RMII mode UCC5 in RMII mode UCC6 in RMII mode UCC7 in RMII mode UCC8 in RMII mode following patch is necessary for working UCC in RMII mode: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html - Flash accessed via MTD layer On this hardware there is an Intel P30 flash, following patch series is necessary for working with this hardware: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html - I2C using I2C Bus 1 from the MPC8360 cpu Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15i2c/chips: Move max6875 to drivers/misc/eepromWolfram Sang
This driver only reads the user EEPROM of that chip, so we can move it to the eeprom-directory in order to further clean up (and later remove) drivers/i2c/chips. The Kconfig text was updated to match the current functionality, dropping the meanwhile obsoleted parts. Defconfigs have been adapted. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-12Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/kernel/asm-offsets.c
2009-06-04powerpc/40x: Convert AMCC Kilauea/Halekala boards to ppc40x_simpleJosh Boyer
This cleans up the kilauea/halekala board ports to use the ppc40x_simple platform support. Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04powerpc/40x: Convert AMCC Makalu board to ppc40x_simpleJosh Boyer
This cleans up the makalu board port to use the ppc40x_simple platform support. Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04powerpc/4xx: Sequoia: Enable NAND supportStefan Roese
Now that the 4xx NAND driver is available again in arch/powerpc, let's enable it on Sequoia. This patch also disables the early debug messages (CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-03powerpc/4xx: Disable PCI_LEGACYJosh Boyer
The single board defconfig files were missed during the cleanup of CONFIG_PCI_LEGACY in the multi-board config files. This disables the option for the single board configs, as it isn't used by anything for these boards. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-02powerpc/pmac: Update PowerMac 32-bit defconfigBenjamin Herrenschmidt
This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-18powerpc/ps3: Update ps3_defconfigGeoff Levand
Refresh and set these options: CONFIG_SYSFS_DEPRECATED_V2: y -> n CONFIG_INPUT_JOYSTICK: y -> n CONFIG_HID_SONY: n -> m CONFIG_RTC_DRV_PS3: - -> m Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-13powerpc/8xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/embedded6xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/86xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/85xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/83xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-22Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into mergePaul Mackerras
2009-04-21powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig coverKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Added SMP defconfigKumar Gala
Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Enabled a bunch of FSL specific drivers/optionsKumar Gala
* Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Updated generic mpc85xx_defconfigKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-20powerpc/5200: defconfig updatesGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-07powerpc/85xx: TQM8548: update defconfigWolfgang Grandegger
Enable highmem support for the TQM8548-AG modules and NAND support for the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support because it's not available on the STK85xx starter kit. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc/pseries: Enable relay in pseries_defconfigAnton Blanchard
Enable relay in pseries config, ppc64_defconfig had it enabled but pseries did not. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-27powerpc/85xx: Add support for the "socrates" board (MPC8544).Wolfgang Grandegger
Supported are Ethernet, serial console, I2C, I2C-based RTC and temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime display controller. The multiplexing of FPGA interrupts onto PowerPC interrupt lines is supported through our own fpga_pic interrupt controller driver. For example the SJA1000 controller is level low sensitive connected to fpga_pic line 2 and is routed to the second (of three) irq lines to the CPU: can@3,100 { compatible = "philips,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 2>; interrupts = <2 8 1>; // number, type, routing interrupt-parent = <&fpga_pic>; }; Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24powerpc: Turn on self-tests in ppc64_defconfigMichael Ellerman
Most of the code enabled by these options is __init, and it's much more useful to actually run the tests. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-03-19powerpc/86xx: Default configuration for GE Fanuc's PPC9AMartyn Welch
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's PPC9A, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-18powerpc/ps3: ps3_defconfig updatesGeoff Levand
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-27 08:40:15 +0000