summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs
AgeCommit message (Collapse)Author
2009-08-27powerpc/ps3: Update ps3_defconfigGeoff Levand
Update ps3_defconfig. o Refresh for 2.6.31. o Remove MTD support. o Add more HID drivers. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-29powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update GE Fanuc sbc310 default configurationMartyn Welch
General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29powerpc/86xx: Update defconfig for GE Fanuc's PPC9AMartyn Welch
General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-06powerpc/44x: Update Warp defconfigSean MacLennan
* Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-17Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-06-16Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: therm_windtunnel: Convert to a new-style i2c driver therm_adt746x: Convert to a new-style i2c driver windfarm: Convert to new-style i2c drivers therm_pm72: Convert to a new-style i2c driver i2c-viapro: Add new PCI device ID for VX855 i2c/chips: Move max6875 to drivers/misc/eeprom i2c: Do not give adapters a default parent i2c: Do not probe for TV chips on Voodoo3 adapters i2c: Retry automatically on arbitration loss i2c: Remove void casts
2009-06-15powerpc/85xx: Add defconfig for X-ES MPC85xx boardsNate Case
Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-1583xx: add support for the kmeter1 board.Heiko Schocher
The following series implements basic board support for the kmeter1 board from keymile, based on a MPC8360. This series provides the following functionality: - The board can boot with a serial console on UART1 - Ethernet: UCC1 in RGMII mode UCC2 in RGMII mode UCC4 in RMII mode UCC5 in RMII mode UCC6 in RMII mode UCC7 in RMII mode UCC8 in RMII mode following patch is necessary for working UCC in RMII mode: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html - Flash accessed via MTD layer On this hardware there is an Intel P30 flash, following patch series is necessary for working with this hardware: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html - I2C using I2C Bus 1 from the MPC8360 cpu Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15i2c/chips: Move max6875 to drivers/misc/eepromWolfram Sang
This driver only reads the user EEPROM of that chip, so we can move it to the eeprom-directory in order to further clean up (and later remove) drivers/i2c/chips. The Kconfig text was updated to match the current functionality, dropping the meanwhile obsoleted parts. Defconfigs have been adapted. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-12Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/kernel/asm-offsets.c
2009-06-04powerpc/40x: Convert AMCC Kilauea/Halekala boards to ppc40x_simpleJosh Boyer
This cleans up the kilauea/halekala board ports to use the ppc40x_simple platform support. Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04powerpc/40x: Convert AMCC Makalu board to ppc40x_simpleJosh Boyer
This cleans up the makalu board port to use the ppc40x_simple platform support. Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04powerpc/4xx: Sequoia: Enable NAND supportStefan Roese
Now that the 4xx NAND driver is available again in arch/powerpc, let's enable it on Sequoia. This patch also disables the early debug messages (CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-03powerpc/4xx: Disable PCI_LEGACYJosh Boyer
The single board defconfig files were missed during the cleanup of CONFIG_PCI_LEGACY in the multi-board config files. This disables the option for the single board configs, as it isn't used by anything for these boards. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-02powerpc/pmac: Update PowerMac 32-bit defconfigBenjamin Herrenschmidt
This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-18powerpc/ps3: Update ps3_defconfigGeoff Levand
Refresh and set these options: CONFIG_SYSFS_DEPRECATED_V2: y -> n CONFIG_INPUT_JOYSTICK: y -> n CONFIG_HID_SONY: n -> m CONFIG_RTC_DRV_PS3: - -> m Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-13powerpc/8xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/embedded6xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/86xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/85xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13powerpc/83xx: Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-22Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into mergePaul Mackerras
2009-04-21powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig coverKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Added SMP defconfigKumar Gala
Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Enabled a bunch of FSL specific drivers/optionsKumar Gala
* Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-21powerpc/85xx: Updated generic mpc85xx_defconfigKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-20powerpc/5200: defconfig updatesGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-07powerpc/85xx: TQM8548: update defconfigWolfgang Grandegger
Enable highmem support for the TQM8548-AG modules and NAND support for the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support because it's not available on the STK85xx starter kit. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc/pseries: Enable relay in pseries_defconfigAnton Blanchard
Enable relay in pseries config, ppc64_defconfig had it enabled but pseries did not. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-27powerpc/85xx: Add support for the "socrates" board (MPC8544).Wolfgang Grandegger
Supported are Ethernet, serial console, I2C, I2C-based RTC and temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime display controller. The multiplexing of FPGA interrupts onto PowerPC interrupt lines is supported through our own fpga_pic interrupt controller driver. For example the SJA1000 controller is level low sensitive connected to fpga_pic line 2 and is routed to the second (of three) irq lines to the CPU: can@3,100 { compatible = "philips,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 2>; interrupts = <2 8 1>; // number, type, routing interrupt-parent = <&fpga_pic>; }; Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24powerpc: Turn on self-tests in ppc64_defconfigMichael Ellerman
Most of the code enabled by these options is __init, and it's much more useful to actually run the tests. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-03-19powerpc/86xx: Default configuration for GE Fanuc's PPC9AMartyn Welch
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's PPC9A, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-18powerpc/ps3: ps3_defconfig updatesGeoff Levand
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11Merge commit 'gcl/next' into nextBenjamin Herrenschmidt
2009-03-11Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-03-09powerpc: fix linkstation and storcenter compilation breakageGuennadi Liakhovetski
Defining flash partition table in platform code is deprecated, and due to recent changes linkstation and storcenter do not compile any more with their default configurations because of undefined references to physmap_set_partitions(). Instead of fixing them by using the correct kernel configuration macro in preprocessor conditional, remove partition table definitions altogether. Instead add support for partition definition on the command-line and in device tree to the default configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-03Merge commit 'jwb/next' into nextBenjamin Herrenschmidt
2009-02-28powerpc/4xx: Enable SERIAL_OF support by default for Virtex platformsGrant Likely
Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26powerpc/5200: Add digsy-mtc support to mpc5200_defconfigGrzegorz Bernacki
The following options are enabled to support the digsy-mtc. - LXT phy - AT24 eeprom - RTC (DS1337) - MTD partitioning based on OF description Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-14AMCC PPC 460SX redwood SoC platform initial frameworkMadhulika Madishetty
This patch contains initial framework for the AMCC Redwood board. Signed-off-by: Madhulika Madishetty <mmadishetty@amcc.com> Signed-off-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Vidhyananth Venkatasamy <vvenkatasamy@amcc.com> Signed-off-by: Preetesh Parekh <pparekh@amcc.com> Acked-by: Loc Ho <lho@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14powerpc/4xx: Add missing USB and i2c devices to CanyonlandsBenjamin Herrenschmidt
This adds the device-tree entries for a handful of devices on the Canyonlands board, such as the EHCI and OHCI controllers, the real time clock and the AD7414 thermal monitor. I also updated the defconfig to enable various options related to these devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-11powerpc/amigaone: Default config for AmigaOne boardsGerhard Pircher
CONFIG_CC_OPTIMIZE_FOR_SIZE is selected, because otherwise the kernel wouldn't boot. The AmigaOne's U-boot firmware seems to have a problem loading uImages bigger than 1.8 MB. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11Merge commit 'kumar/next' into nextBenjamin Herrenschmidt
2009-02-06powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boardsAnton Vorontsov
TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-29powerpc/5200: update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-01-28powerpc/86xx: Extend GE Fanuc GPIO driver for the SBC310Martyn Welch
This patch adds basic support for the 6 GPIO lines found on GE Fanucs SBC310 to the GE Fanuc GPIO driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28powerpc/86xx: Default configutation for GE Fanuc's SBC310Martyn Welch
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's SBC310, a 3U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28Merge commit 'jwb/jwb-merge' into mergeBenjamin Herrenschmidt
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 20:36:35 +0000