summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2008-05-09Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) [POWERPC] Remove leftover printk in isa-bridge.c [POWERPC] Remove duplicate #include [POWERPC] Initialize lockdep earlier [POWERPC] Document when printk is useable [POWERPC] Fix bogus paca->_current initialization [POWERPC] Fix of_i2c include for module compilation [POWERPC] Make default cputable entries reflect selected CPU family [POWERPC] spufs: lockdep annotations for spufs_dir_close [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run [POWERPC] 4xx: Fix PCI mem in sequoia DTS [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on 440x6 core [POWERPC] spufs: spu_create should send inotify IM_CREATE event [POWERPC] spufs: handle faults while the context switch pending flag is set [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions [POWERPC] spufs: try to route SPU interrupts to local node [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback [POWERPC] spufs: update master runcntl with context lock held [POWERPC] spufs: fix post-stopped update of MFC_CNTL register ...
2008-05-09Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
2008-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) net: Added ASSERT_RTNL() to dev_open() and dev_close(). can: Fix can_send() handling on dev_queue_xmit() failures netns: Fix arbitrary net_device-s corruptions on net_ns stop. netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request macvlan: Fix memleak on device removal/crash on module removal net/ipv4: correct RFC 1122 section reference in comment tcp FRTO: SACK variant is errorneously used with NewReno e1000e: don't return half-read eeprom on error ucc_geth: Don't use RX clock as TX clock. cxgb3: Use CAP_SYS_RAWIO for firmware pcnet32: delete non NAPI code from driver. fs_enet: Fix a memory leak in fs_enet_mdio_probe [netdrvr] eexpress: IPv6 fails - multicast problems 3c59x: use netstats in net_device structure 3c980-TX needs EXTRA_PREAMBLE fix warning in drivers/net/appletalk/cops.c e1000e: Add support for BM PHYs on ICH9 uli526x: fix endianness issues in the setup frame uli526x: initialize the hardware prior to requesting interrupts ...
2008-05-08[POWERPC] spufs: lockdep annotations for spufs_dir_closeChristoph Hellwig
We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep lockdep happy. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-08[POWERPC] spufs: don't requeue victim contex in find_victim if it's not in ↵Christoph Hellwig
spu_run We should not requeue the victim context in find_victim if the owner is not in spu_run. It's first not needed because leaving the context on the spu is an optimization and second is harmful because it means the owner could re-enter spu_run when the context is on the runqueue and trip the BUG_ON in __spu_update_sched_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-06Merge branch 'for-2.6.26' of ↵Jeff Garzik
git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream
2008-05-06[POWERPC] spufs: spu_create should send inotify IM_CREATE eventChristoph Hellwig
Creating a spufs context or gand using spu_create should send an inotify event so that things like performance monitors have an easy way to find out about newly created contexts. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] Assign PDE->data before gluing PDE into /proc treeDenis V. Lunev
Simply replace proc_create and further data assigned with proc_create_data. No need to check for data!=NULL after that. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05[POWERPC] spufs: handle faults while the context switch pending flag is setLuke Browning
Currently, page fault handlers don't issue a mfc restart if the context switch pending flag is set, which can leave us with a hanging DMA after a context restore. This patch introduces fault pending flag that is set by the fault handler and read by the context switch code, so that the latter can add the restart bit at the right spot, after it has successfuly saved the state of the mfc control register. Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptionsLuke Browning
SPU class 0 & 1 exceptions may occur in parallel, so we may end up overwriting csa.dsisr. This change adds dedicated fields for each class to the spu and the spu context so that fault data is not overwritten. Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: try to route SPU interrupts to local nodeLuke Browning
Currently, we re-route SPU interrupts to the current cpu, which may be on a remote node. In the case of time slicing, all spu interrupts will end up routed to the same cpu, where the spusched_tick occurs. This change routes mfc interrupts to the cpu where the controlling thread last ran, provided that cpu is on the same node as the spu (otherwise don't reroute interrupts). This should improve performance and provide a more predictable environment for processing spu exceptions. In the past we have seen concurrent delivery of spu exceptions to two cpus. This eliminates that concern. Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqsLuke Browning
synchronize_irq() provides the serialization for SPU_CONTEXT_SWITCH_PENDING which is read with a simple load. This routine guarantees that the relevant interrupt handlers are not running, so that the next time they do run they will see the update memory value. This must be done correctly so that exception handling code does not restart the mfc in the middle of a context switch while we are trying to atomically stop it and save state. Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: don't acquire state_mutex interruptible while performing ↵Jeremy Kerr
callback There's currently no way to tell if spu_process_callback has returned with the state mutex held, as -EINTR may be returned by either the syscall or the spu_acquire fail case. Instead, just do a non-interruptible mutex_lock here. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: update master runcntl with context lock heldJeremy Kerr
Currently, we update the SPU master run control bit (ie, spu_enable_spu) in spufs_run_spu before we grab the context mutex. This can result in races with other processes accessing this context's resources. This change moves the spu_enable_spu to after we have acquired the context lock. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: fix post-stopped update of MFC_CNTL registerJeremy Kerr
We currently have two issues with the MFC save code: * save_mfc_decr doesn't handle a transition of 1 -> 0 of the Ds bit * The Q bit may be stale in the CSA This change fixes the first issue by clearing the relevant bits from the MFC_CNTL value in the CSA before or-ing in the updated status. Also, we add the Q bit to the updated status. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: fix save of mfc_cntl registerJeremy Kerr
Currently, we can introduce invalid entries into the MFC queues: 1) context starts a DMA 2) context gets scheduled out during a DMA - kernel saves MFC queue to CSA - kernel saves 0x0 in csa->mfc_control_RW 3) context gets scheduled in - csa->mfc_control[Q] ('queues empty') isn't set, so DMA queues are restored from the CSA 4) context's DMA is completed 5) context gets scheduled out again, no DMA occuring this time - kernel sees that MFC_CNTL[Q] ('queues empty') is set, so doesn't touch saved queue data in CSA - kernel saves 0x0 in csa->mfc_control_RW 6) context gets scheduled in - csa->mfc_control[Q] ('queues empty') isn't set (we saved is as 0!), so DMA queues are restored from the CSA In this last restore, we've restored the queue status from step 2, which are now invalid. This change makes save_mfc_cntl() closer to the save/restore sequence, as specified in the CBE handbook. With changes from Luke Browning. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] spufs: don't touch suspend bits when purging DMA queueJeremy Kerr
When we issue a MFC purge request, we may inadvertantly clear the suspended status. This change adds the MFC_CNTL_SUSPEND_MASK when we issue a purge request, so that the suspend bit is masked out. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05[POWERPC] cell: Fix lost interrupts due to fasteoi handlerJeremy Kerr
We may currently lose interrupts during SPE context switch, as we alter the INT_Route register. Because the IIC uses a per-thread priority status, changing the interrupt routing to a different thread means that the IRQ is no longer masked by the priority status, so we end up with two fasteoi IRQ handlers executing for the one irq_desc. The fasteoi handler doesn't handle multiple IRQs, so drops the second one. Fix this by using our own flow handler. This is based on handle_edge_irq, but issues an eoi after IRQs are handled, and doesn't do any mask/unmasking. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Remove unsupported wakeup sources [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static [POWERPC] PS3: Add time include to lpm [POWERPC] Fix slb.c compile warnings [POWERPC] Xilinx: Fix compile warnings [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c [RAPIDIO] fix current kernel-doc notation [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot Fix a potential issue in mpc52xx uart driver [POWERPC] mpc5200: Allow for fixed speed MII configurations [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-02[POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy staticGeert Uytterhoeven
The routines ps3_virq_setup() and ps3_virq_destroy() are used in only one file, so make them static. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-01[PATCH] split linux/file.hAl Viro
Initial splitoff of the low-level stuff; taken to fdtable.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-30Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix crashkernel= handling when no crashkernel= specified [POWERPC] Make emergency stack safe for current_thread_info() use [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h [POWERPC] spufs: trace spu_acquire_saved events [POWERPC] spufs: fix marker name for find_victim [POWERPC] spufs: add marker for destroy_spu_context [POWERPC] spufs: add sputrace marker parameter names [POWERPC] spufs: add context switch notification log [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200 [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format [POWERPC] mpc5200: Fix FEC error handling on FIFO errors [POWERPC] mpc5200: add Phytec pcm030 board support [POWERPC] mpc5200: add gpiolib support for mpc5200 [POWERPC] mpc5200: add interrupt type function [POWERPC] mpc5200: Fix unterminated of_device_id table
2008-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufsPaul Mackerras
2008-04-30[POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.hKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30[POWERPC] spufs: trace spu_acquire_saved eventsJulio M. Merino Vidal
The sputrace module contained a trace entry for spu_acquire_saved, but this marker was not placed anywhere. Fix this by adding a marker to the routine. Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30[POWERPC] spufs: fix marker name for find_victimJulio M. Merino Vidal
Fix a typo in the marker for the find_victim function, which prevented it from being traced. It previously read find_vitim. Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30[POWERPC] spufs: add marker for destroy_spu_contextJulio M. Merino Vidal
The sputrace module contained a reference to a marker for destroy_spu_context, but this marker did not appear in the code. Fix this by adding a marker in the function. Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30[POWERPC] spufs: add sputrace marker parameter namesJulio M. Merino Vidal
The markers facility defines the marker parameters to be of the form 'name %format'. Add parameter names to sputrace, to specify the context and %spu paramerters, instead of just specifying the '%format' part. Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30[POWERPC] spufs: add context switch notification logChristoph Hellwig
There are userspace instrumentation tools that need to monitor spu context switches. This patch adds a new file called 'switch_log' to each spufs context directory that can be used to monitor the context switches. Context switch in/out and exit from spu_run are monitored after the file was first opened and can be read from it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-29Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [RAPIDIO] Change RapidIO doorbell source and target ID field to 16-bit [RAPIDIO] Add RapidIO connection info print out and re-training for broken connections [RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641 [RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id table [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file [RAPIDIO] Auto-probe the RapidIO system size [RAPIDIO] Add OF-tree support to RapidIO controller driver [RAPIDIO] Add RapidIO multi mport support [RAPIDIO] Move include/asm-ppc/rio.h to asm-powerpc [RAPIDIO] Add RapidIO option to kernel configuration [RAPIDIO] Change RIO function mpc85xx_ to fsl_ [POWERPC] Provide walk_memory_resource() for powerpc [POWERPC] Update lmb data structures for hotplug memory add/remove [POWERPC] Hotplug memory remove notifications for powerpc [POWERPC] windfarm: Add PowerMac 12,1 support [POWERPC] Fix building of pmac32 when CONFIG_NVRAM=m [POWERPC] Add IRQSTACKS support on ppc32 [POWERPC] Use __always_inline for xchg* and cmpxchg* [POWERPC] Add fast little-endian switch system call
2008-04-29powerpc: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29[POWERPC] mpc5200: add Phytec pcm030 board supports.hauer@pengutronix.de
Add board support for the Phytec pcm030 mpc5200b based board. It does not need any platform specific fixups and as such is handled as a mpc5200 simple platform. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[POWERPC] mpc5200: add gpiolib support for mpc5200s.hauer@pengutronix.de
This patch adds gpiolib support for mpc5200 SOCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[POWERPC] mpc5200: add interrupt type functionSascha Hauer
Add a set_type function for external (GPIO) interrupts. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id tableZhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[RAPIDIO] Add RapidIO option to kernel configurationZhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] Update lmb data structures for hotplug memory add/removeBadari Pulavarty
The powerpc kernel maintains information about logical memory blocks in the lmb.memory structure, which is initialized and updated at boot time, but not when memory is added or removed while the kernel is running. This adds a hotplug memory notifier which updates lmb.memory when memory is added or removed. This information is useful for eHEA driver to find out the memory layout and holes. NOTE: No special locking is needed for lmb_add() and lmb_remove(). Calls to these are serialized by caller. (pSeries_reconfig_chain). Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] Hotplug memory remove notifications for powerpcBadari Pulavarty
Hotplug memory remove notifier for 64-bit powerpc. This gets invoked by writing to /proc/ppc64/ofdt the string "remove_node " followed by the firmware device tree pathname of the node that needs to be removed. In response, this adjusts the sections and removes sysfs entries by calling __remove_pages(). Then it calls arch-specific code to get rid of the hardware MMU mappings for the section of memory. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Reviewed-by: Michael Ellerman <michael@ellerman.id.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] Fix building of pmac32 when CONFIG_NVRAM=mTony Breeds
Kamalesh Babulal (kamalesh@linux.vnet.ibm.com) reports that CONFIG_NVRAM=m is valid in terms of Kconfig but fails to build with: Building modules, stage 2. MODPOST 1401 modules ERROR: "pmac_newworld" [arch/powerpc/platforms/powermac/nvram.ko] undefined! ERROR: "__alloc_bootmem" [arch/powerpc/platforms/powermac/nvram.ko] undefined! make[1]: *** [__modpost] Error The arch/powerpc/platforms/powermac/nvram.c code really needs to be builtin, but as its compilation is dependent on a generic Kconfig symbol we force nvram.c to be builtin if CONFIG_NVRAM is 'y' or 'm'. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28mv643xx_eth: get rid of static variables, allow multiple instancesLennert Buytenhek
Move mv643xx_eth's static state (ethernet register block base address and MII management interface spinlock) into a struct hanging off the shared platform device. This is necessary to support chips that contain multiple mv643xx_eth silicon blocks. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-28celleb_scc_pciex __iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28powerpc: Add DIU platform code for MPC8610HPCDYork Sun
Add platform code to support Freescale DIU. The platform code includes framebuffer memory allocation, pixel format, monitor port, etc. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24[POWERPC] celleb: Add support for PCI ExpressIshizaki Kou
This adds support for PCI Express port on Celleb. I/O space of this PCI Express port is not mapped in memory space. So we use the io-workaround mechanism to make accesses indirect. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move miscellaneous files for BeatIshizaki Kou
This moves miscellaneous files for Beat into platforms/cell/. All files in this patch are used by celleb-beat only. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move a file for SPU on BeatIshizaki Kou
This moves SPU support code on Beat into platforms/cell/. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move files for Beat mmu and iommuIshizaki Kou
This moves files for mmu and iommu on Beat into platforms/cell/. All files in this patch are used by celleb-beat only. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move files for Beat hvcall interfacesIshizaki Kou
This moves files for Beat hvcall interfaces into platforms/cell/. All files in this patch are used by celleb-beat only. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move the SCC related code for cellebIshizaki Kou
This moves the SCC (Super Companion Chip) related code for celleb into platforms/cell/. All files in this patch are used by celleb-beat and celleb-native commonly. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Move the files for celleb base supportIshizaki Kou
This moves the base code for celleb support into platforms/cell/. All files in this patch are used by celleb-beat and celleb-native commonly. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24[POWERPC] celleb: Consolidate io-workarounds codeIshizaki Kou
Now, we can use generic io-workarounds mechanism and the workaround code for spider-pci. This changes Celleb PCI code to use spider-pci code. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 18:23:58 +0000