summaryrefslogtreecommitdiff
path: root/arch/sh/boards/board-ap325rxa.c
AgeCommit message (Collapse)Author
2009-04-13sh: ap325: use edge control for ov772x cameraKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: ap325 and Migo-R use new sh_mobile_ceu_info flagsKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: ap325rxa: Add ov772x support, again.Kuninori Morimoto
Now that the V4L bits have finally settled.. This patch adds support for a secondary ov772x camera on ap325rxa. This is supported in addition to the regular soc_camera_platform camera. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-30V4L/DVB (10665): soc-camera: add data signal polarity flags to driversGuennadi Liakhovetski
All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-16sh: add ap325 lcd power off supportMagnus Damm
Improve the ap325 board code to allow the lcd panel and backlight to be powered off. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: Add media/soc_camera.h to board setup of Renesas AP325RXANobuhiro Iwamatsu
Other compilation errors were revised by commit of "sh: ap325rxa: Revert ov772x support" (08c2f5b4d76f83213e379b12df504269d21c9e7c) but other compilation errors are given. We revert this commit and need to add new header(media/soc_camera.h). This change revises new compilation error. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: ap325rxa: Revert ov772x support.Paul Mundt
This change depends on some v4l changes that have been pushed back to 2.6.30, so drop this and fall back on the old soc_camera code until then. Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Acked-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: ap325rxa: Add ov772x support.Kuninori Morimoto
This patch add ov772x camera settings to ap325, Old camera is still supported. And it will be 2nd camera if you select ov772x and soc_camera_platform in same time. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: ap325rxa: control camera power toggling.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: ap325rxa MMC support using spi_gpio and mmc_spiMagnus Damm
This patch adds CN3 MMC support for ap325rxa using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21sh: convert ap325rxa platform to use smsc911x.Steve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add LCDC interrupt configuration to AP325 and Migo-RMagnus Damm
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile lcdc clock framework supportMagnus Damm
Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile ceu clock framework supportMagnus Damm
Add clock framework support to the sh_mobile ceu and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Kill off unused port definitions.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21sh: add support FLCTL for ap325rxa boardYoshihiro Shimoda
This patch adds platform_device for sh_flctl driver, NAND Flash simple partition, and GPIO setting. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Move the CPU definition headers from asm/ to cpu/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Merge branch 'sh/gpiolib'Paul Mundt
2008-10-20sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA boardNobuhiro Iwamatsu
Renesas AP325RXA board has Epson RX-8564LC of RTC. This patch supports RTC of this board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7723 GPIO on AP325RXA boardMagnus Damm
This patch enables the GPIO code on AP325RXA and converts the code from register based pinmux configuration to GPIO based pin by pin setup. While at it 2 LEDs and one switch are added and exported to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt
This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-24sh: ap325rxa: create CPLD data area in mtdNobuhiro Iwamatsu
AP320 and AP325RXA has CPLD data in NOR Flash. If this area erased, this board can not boot. This patch create CPLD data area and set writeable mask bit. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11video: export sh_mobile_lcdc panel sizeMagnus Damm
Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03arch/sh/boards/board-ap325rxa.c: removed duplicated #includeHuang Weiyi
Removed duplicated include <linux/delay.h> in arch/sh/boards/board-ap325rxa.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30sh: Move out individual boards without mach groups.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-20 16:13:42 +0000