summaryrefslogtreecommitdiff
path: root/arch/sparc/lib
AgeCommit message (Collapse)Author
2015-03-23sparc64: Fix several bugs in memmove().David S. Miller
Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by: David Ahern <david.ahern@oracle.com> Reported-by: Bob Picco <bpicco@meloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locksAndreas Larsson
Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14sparc64: Fix FPU register corruption with AES crypto offload.David S. Miller
The AES loops in arch/sparc/crypto/aes_glue.c use a scheme where the key material is preloaded into the FPU registers, and then we loop over and over doing the crypt operation, reusing those pre-cooked key registers. There are intervening blkcipher*() calls between the crypt operation calls. And those might perform memcpy() and thus also try to use the FPU. The sparc64 kernel FPU usage mechanism is designed to allow such recursive uses, but with a catch. There has to be a trap between the two FPU using threads of control. The mechanism works by, when the FPU is already in use by the kernel, allocating a slot for FPU saving at trap time. Then if, within the trap handler, we try to use the FPU registers, the pre-trap FPU register state is saved into the slot. Then at trap return time we notice this and restore the pre-trap FPU state. Over the long term there are various more involved ways we can make this work, but for a quick fix let's take advantage of the fact that the situation where this happens is very limited. All sparc64 chips that support the crypto instructiosn also are using the Niagara4 memcpy routine, and that routine only uses the FPU for large copies where we can't get the source aligned properly to a multiple of 8 bytes. We look to see if the FPU is already in use in this context, and if so we use the non-large copy path which only uses integer registers. Furthermore, we also limit this special logic to when we are doing kernel copy, rather than a user copy. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-13Merge branch 'locking-arch-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull arch atomic cleanups from Ingo Molnar: "This is a series kept separate from the main locking tree, which cleans up and improves various details in the atomics type handling: - Remove the unused atomic_or_long() method - Consolidate and compress atomic ops implementations between architectures, to reduce linecount and to make it easier to add new ops. - Rewrite generic atomic support to only require cmpxchg() from an architecture - generate all other methods from that" * 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read() locking, mips: Fix atomics locking, sparc64: Fix atomics locking,arch: Rewrite generic atomic support locking,arch,xtensa: Fold atomic_ops locking,arch,sparc: Fold atomic_ops locking,arch,sh: Fold atomic_ops locking,arch,powerpc: Fold atomic_ops locking,arch,parisc: Fold atomic_ops locking,arch,mn10300: Fold atomic_ops locking,arch,mips: Fold atomic_ops locking,arch,metag: Fold atomic_ops locking,arch,m68k: Fold atomic_ops locking,arch,m32r: Fold atomic_ops locking,arch,ia64: Fold atomic_ops locking,arch,hexagon: Fold atomic_ops locking,arch,cris: Fold atomic_ops locking,arch,avr32: Fold atomic_ops locking,arch,arm64: Fold atomic_ops locking,arch,arm: Fold atomic_ops ...
2014-09-10locking, sparc64: Fix atomicsPeter Zijlstra
The patch folding the atomic ops had a silly fail in the _return primitives. Fixes: 4f3316c2b5fe ("locking,arch,sparc: Fold atomic_ops") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140902094016.GD31157@worktop.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09sparc: Let memset return the address argumentAndreas Larsson
This makes memset follow the standard (instead of returning 0 on success). This is needed when certain versions of gcc optimizes around memset calls and assume that the address argument is preserved in %o0. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14locking,arch,sparc: Fold atomic_opsPeter Zijlstra
Many of the atomic op implementations are the same except for one instruction; fold the lot into a few CPP macros and reduce LoC. This also prepares for easy addition of new ops. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140508135852.825281379@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds
Pull sparc updates from David Miller: 1) Add sparc RAM output to /proc/iomem, from Bob Picco. 2) Allow seeks on /dev/mdesc, from Khalid Aziz. 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg. 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do not insert it into the TLB miss hash tables otherwise we'll livelock. Based upon work by Christopher Alexander Tobias Schulze. 5) Fix BREAK detection in sunsab driver when no actual characters are pending, from Christopher Alexander Tobias Schulze. 6) Because we have modules --> openfirmware --> vmalloc ordering of virtual memory, the lazy VMAP TLB flusher can cons up an invocation of flush_tlb_kernel_range() that covers the openfirmware address range. Unfortunately this will flush out the firmware's locked TLB mapping which causes all kinds of trouble. Just split up the flush request if this happens, but in the long term the lazy VMAP flusher should probably be made a little bit smarter. Based upon work by Christopher Alexander Tobias Schulze. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Fix up merge thinko. sparc: Add "install" target arch/sparc/math-emu/math_32.c: drop stray break operator sparc64: ldc_connect() should not return EINVAL when handshake is in progress. sparc64: Guard against flushing openfirmware mappings. sunsab: Fix detection of BREAK on sunsab serial console bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000 sparc64: Do not insert non-valid PTEs into the TSB hash table. sparc64: avoid code duplication in io_64.h sparc64: reorder functions in io_64.h sparc64: drop unused SLOW_DOWN_IO definitions sparc64: remove macro indirection in io_64.h sparc64: update IO access functions in PeeCeeI sparcspkr: use sbus_*() primitives for IO sparc: Add support for seek and shorter read to /dev/mdesc sparc: use %s for unaligned panic drivers/sbus/char: Micro-optimization in display7seg.c display7seg: Introduce the use of the managed version of kzalloc sparc64 - add mem to iomem resource
2014-07-21sparc64: update IO access functions in PeeCeeISam Ravnborg
The PeeCeeI.c code used in*() + out*() for IO access. But these are in little endian and the native (big) endian result was required which resulted in some bit-shifting. Shift the code over to use the __raw_*() variants all over. This simplifies the code as we can drop the calls to le16_to_cpu() and le32_to_cpu(). And it should be a little faster too. With this change we now uses the same type of IO access functions in all of the file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-18sparc64,ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. Link: http://lkml.kernel.org/r/20140703.211820.1674895115102216877.davem@davemloft.net Cc: David S. Miller <davem@davemloft.net> OKed-to-go-through-tracing-tree-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds
Pull sparc fixes from David Miller: "Sparc sparse fixes from Sam Ravnborg" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (67 commits) sparc64: fix sparse warnings in int_64.c sparc64: fix sparse warning in ftrace.c sparc64: fix sparse warning in kprobes.c sparc64: fix sparse warning in kgdb_64.c sparc64: fix sparse warnings in compat_audit.c sparc64: fix sparse warnings in init_64.c sparc64: fix sparse warnings in aes_glue.c sparc: fix sparse warnings in smp_32.c + smp_64.c sparc64: fix sparse warnings in perf_event.c sparc64: fix sparse warnings in kprobes.c sparc64: fix sparse warning in tsb.c sparc64: clean up compat_sigset_t.seta handling sparc64: fix sparse "Should it be static?" warnings in signal32.c sparc64: fix sparse warnings in sys_sparc32.c sparc64: fix sparse warning in pci.c sparc64: fix sparse warnings in smp_64.c sparc64: fix sparse warning in prom_64.c sparc64: fix sparse warning in btext.c sparc64: fix sparse warnings in sys_sparc_64.c + unaligned_64.c sparc64: fix sparse warning in process_64.c ... Conflicts: arch/sparc/include/asm/pgtable_64.h
2014-05-17sparc64: Add membar to Niagara2 memcpy code.David S. Miller
This is the prevent previous stores from overlapping the block stores done by the memcpy loop. Based upon a glibc patch by Jose E. Marchesi Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02sparc32: introduce asm-generic/io.hSam Ravnborg
Use asm-generic/io.h definitions where applicable. The inxx() and outxx() methods whcih was duplicated in pcic.c + leon_pci.c are replaced by a set of static inlins from asm-generic/io.h iomap.c is replaced by the generic versions, but are still present to support sparc64. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-12sparc64: Make PAGE_OFFSET variable.David S. Miller
Choose PAGE_OFFSET dynamically based upon cpu type. Original UltraSPARC-I (spitfire) chips only supported a 44-bit virtual address space. Newer chips (T4 and later) support 52-bit virtual addresses and up to 47-bits of physical memory space. Therefore we have to adjust PAGE_SIZE dynamically based upon the capabilities of the chip. Note that this change alone does not allow us to support > 43-bit physical memory, to do that we need to re-arrange our page table support. The current encodings of the pmd_t and pgd_t pointers restricts us to "32 + 11" == 43 bits. This change can waste quite a bit of memory for the various tables. In particular, a future change should work to size and allocate kern_linear_bitmap[] and sparc64_valid_addr_bitmap[] dynamically. This isn't easy as we really cannot take a TLB miss when accessing kern_linear_bitmap[]. We'd have to lock it into the TLB or similar. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Bob Picco <bob.picco@oracle.com>
2013-09-05sparc64: Remove RWSEM export leftoversKirill Tkhai
The functions __down_read __down_read_trylock __down_write __down_write_trylock __up_read __up_write __downgrade_write are implemented inline, so remove corresponding EXPORT_SYMBOLs (They lead to compile errors on RT kernel). Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKSStephen Boyd
The help text for this config is duplicated across the x86, parisc, and s390 Kconfig.debug files. Arnd Bergman noted that the help text was slightly misleading and should be fixed to state that enabling this option isn't a problem when using pre 4.4 gcc. To simplify the rewording, consolidate the text into lib/Kconfig.debug and modify it there to be more explicit about when you should say N to this config. Also, make the text a bit more generic by stating that this option enables compile time checks so we can cover architectures which emit warnings vs. ones which emit errors. The details of how an architecture decided to implement the checks isn't as important as the concept of compile time checking of copy_from_user() calls. While we're doing this, remove all the copy_from_user_overflow() code that's duplicated many times and place it into lib/ so that any architecture supporting this option can get the function for free. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Helge Deller <deller@gmx.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-31sparc/srmmu: clear trailing edge of bitmap properlyAkinobu Mita
srmmu_nocache_bitmap is cleared by bit_map_init(). But bit_map_init() attempts to clear by memset(), so it can't clear the trailing edge of bitmap properly on big-endian architecture if the number of bits is not a multiple of BITS_PER_LONG. Actually, the number of bits in srmmu_nocache_bitmap is not always a multiple of BITS_PER_LONG. It is calculated as below: bitmap_bits = srmmu_nocache_size >> SRMMU_NOCACHE_BITMAP_SHIFT; srmmu_nocache_size is decided proportionally by the amount of system RAM and it is rounded to a multiple of PAGE_SIZE. SRMMU_NOCACHE_BITMAP_SHIFT is defined as (PAGE_SHIFT - 4). So it can only be said that bitmap_bits is a multiple of 16. This fixes the problem by using bitmap_clear() instead of memset() in bit_map_init() and this also uses BITS_TO_LONGS() to calculate correct size at bitmap allocation time. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-09sparc: Support atomic64_dec_if_positive properly.David S. Miller
Sparc32 already supported it, as a consequence of using the generic atomic64 implementation. And the sparc64 implementation is rather trivial. This allows us to set ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE for all of sparc, and avoid the annoying warning from lib/atomic64_test.c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-05sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy.David S. Miller
This adds optimized memset/bzero/page-clear routines for Niagara-4. We basically can do what powerpc has been able to do for a decade (via the "dcbz" instruction), which is use cache line clearing stores for bzero and memsets with a 'c' argument of zero. As long as we make the cache initializing store to each 32-byte subblock of the L2 cache line, it works. As with other Niagara-4 optimized routines, the key is to make sure to avoid any usage of the %asi register, as reads and writes to it cost at least 50 cycles. For the user clear cases, we don't use these new routines, we use the Niagara-1 variants instead. Those have to use %asi in an unavoidable way. A Niagara-4 8K page clear costs just under 600 cycles. Add definitions of the MRU variants of the cache initializing store ASIs. By default, cache initializing stores install the line as Least Recently Used. If we know we're going to use the data immediately (which is true for page copies and clears) we can use the Most Recently Used variant, to decrease the likelyhood of the lines being evicted before they get used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
There's a Niagara 2 memcpy fix in this tree and I have a Kconfig fix from Dave Jones which requires the sparc-next changes which went upstream yesterday. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28sparc64: Fix trailing whitespace in NG4 memcpy.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27sparc64: Fix comment type in NG4 copy from user.David S. Miller
Noticed by Greg Onufer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27sparc64: Fix return value of Niagara-2 memcpy.David S. Miller
It gets clobbered by the kernel's VISEntryHalf, so we have to save it in a different register than the set clobbered by that macro. The instance in glibc is OK and doesn't have this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27sparc64: Add SPARC-T4 optimized memcpy.David S. Miller
Before After -------------- -------------- bw_tcp: 1288.53 MB/sec 1637.77 MB/sec bw_pipe: 1517.18 MB/sec 2107.61 MB/sec bw_unix: 1838.38 MB/sec 2640.91 MB/sec make -s -j128 allmodconfig 5min 49sec 5min 31sec Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20sparc64: Add SHA1 driver making use of the 'sha1' instruction.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27sparc64: Consistently use fsrc2 rather than fmovd in optimized asm.David S. Miller
Because fsrc2, unlike fmovd, does not update the %fsr register. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-26sparc: use the new generic strnlen_user() functionDavid Miller
This throws away the sparc-specific functions in favor of the generic optimized version. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-24lib: Sparc's strncpy_from_user is generic enough, move under lib/David S. Miller
To use this, an architecture simply needs to: 1) Provide a user_addr_max() implementation via asm/uaccess.h 2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig 3) Remove the existing strncpy_from_user() implementation and symbol exports their architecture had. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: David Howells <dhowells@redhat.com>
2012-05-24kernel: Move REPEAT_BYTE definition into linux/kernel.hDavid S. Miller
And make sure that everything using it explicitly includes that header file. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24sparc: Increase portability of strncpy_from_user() implementation.David S. Miller
Hide details of maximum user address calculation in a new asm/uaccess.h interface named user_addr_max(). Provide little-endian implementation in find_zero(), which should work but can probably be improved. Abstrace alignment check behind IS_UNALIGNED() macro. Kill double-semicolon, noticed by David Howells. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-23sparc: Optimize strncpy_from_user() zero byte search.David S. Miller
Compute a mask that will only have 0x80 in the bytes which had a zero in them. The formula is: ~(((x & 0x7f7f7f7f) + 0x7f7f7f7f) | x | 0x7f7f7f7f) In the inner word iteration, we have to compute the "x | 0x7f7f7f7f" part, so we can reuse that in the above calculation. Once we have this mask, we perform divide and conquer to find the highest 0x80 location. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22sparc: Add full proper error handling to strncpy_from_user().David S. Miller
Linus removed the end-of-address-space hackery from fs/namei.c:do_getname() so we really have to validate these edge conditions and cannot cheat any more (as x86 used to as well). Move to a common C implementation like x86 did. And if both src and dst are sufficiently aligned we'll do word at a time copies and checks as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Add ucmpdi2.o to obj-y instead of lib-y.David S. Miller
Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: add ucmpdi2Sam Ravnborg
Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc32: Kill off software 32-bit multiply/divide routines.David S. Miller
For the explicit calls to .udiv/.umul in assembler, I made a mechanical (read as: safe) transformation. I didn't attempt to make any simplifications. In particular, __ndelay and __udelay can be simplified significantly. Some of the %y reads are unnecessary and these routines have no need any longer for allocating a register window, they can be leaf functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13sparc32: Kill btfixup for xchg()'s 'swap' instruction.David S. Miller
We always have this instruction available, so no need to use btfixup for it any more. This also eradicates the whole of atomic_32.S and thus the __atomic_begin and __atomic_end symbols completely. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-11sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROCDavid S. Miller
Use those, instead of doing it all by hand. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-11sparc32: Remove inline strncmp "optimization" for constant counts.David S. Miller
Let the compiler do stuff like this. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-11sparc32: drop sun4c specific ___xchg32 implementationSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02lib: Fix multiple definitions of clz_tabDavid Miller
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
lib: use generic pci_iomap on all architectures Many architectures don't want to pull in iomap.c, so they ended up duplicating pci_iomap from that file. That function isn't trivial, and we are going to modify it https://lkml.org/lkml/2011/11/14/183 so the duplication hurts. This reduces the scope of the problem significantly, by moving pci_iomap to a separate file and referencing that from all architectures. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: alpha: drop pci_iomap/pci_iounmap from pci-noop.c mn10300: switch to GENERIC_PCI_IOMAP mn10300: add missing __iomap markers frv: switch to GENERIC_PCI_IOMAP tile: switch to GENERIC_PCI_IOMAP tile: don't panic on iomap sparc: switch to GENERIC_PCI_IOMAP sh: switch to GENERIC_PCI_IOMAP powerpc: switch to GENERIC_PCI_IOMAP parisc: switch to GENERIC_PCI_IOMAP mips: switch to GENERIC_PCI_IOMAP microblaze: switch to GENERIC_PCI_IOMAP arm: switch to GENERIC_PCI_IOMAP alpha: switch to GENERIC_PCI_IOMAP lib: add GENERIC_PCI_IOMAP lib: move GENERIC_IOMAP to lib/Kconfig Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
2011-12-27sparc32: drop unused atomic24 supportSam Ravnborg
atomic24 support was used to semaphores in the past - but is no longer used. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-04sparc: switch to GENERIC_PCI_IOMAPMichael S. Tsirkin
sparc copied pci_iomap from generic code, probably to avoid pulling the rest of iomap.c in. Since that's in a separate file now, we can reuse the common implementation. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-10-20sparc32: Correct the return value of memcpy.David S. Miller
Properly return the original destination buffer pointer. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com>
2011-10-20sparc32: Remove uses of %g7 in memcpy implementation.David S. Miller
This is setting things up so that we can correct the return value, so that it properly returns the original destination buffer pointer. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com>
2011-10-20sparc32: Remove non-kernel code from memcpy implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com>
2011-08-04sparc: Fix __atomic_add_unless() return value.Josip Rodin
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02sparc: Use popc when possible for ffs/__ffs/ffz.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02sparc: Use popc if possible for hweight routines.David S. Miller
Just like powerpc, we code patch at boot time. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02sparc: Minor tweaks to Niagara page copy/clear.David S. Miller
Don't use floating point on Niagara2, use the traditional plain Niagara code instead. Unroll Niagara loops to 128 bytes for copy, and 256 bytes for clear. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-10 12:49:51 +0000