summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2011-03-23x86, binutils, xen: Fix another wrong size directiveAlexander van Heukelum
commit 371c394af27ab7d1e58a66bc19d9f1f3ac1f67b4 upstream. The latest binutils (2.21.0.20110302/Ubuntu) breaks the build yet another time, under CONFIG_XEN=y due to a .size directive that refers to a slightly differently named (hence, to the now very strict and unforgiving assembler, non-existent) symbol. [ mingo: This unnecessary build breakage caused by new binutils version 2.21 gets escallated back several kernel releases spanning several years of Linux history, affecting over 130,000 upstream kernel commits (!), on CONFIG_XEN=y 64-bit kernels (i.e. essentially affecting all major Linux distro kernel configs). Git annotate tells us that this slight debug symbol code mismatch bug has been introduced in 2008 in commit 3d75e1b8: 3d75e1b8 (Jeremy Fitzhardinge 2008-07-08 15:06:49 -0700 1231) ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) The 'bug' is just a slight assymetry in ENTRY()/END() debug-symbols sequences, with lots of assembly code between the ENTRY() and the END(): ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) ... END(do_hypervisor_callback) Human reviewers almost never catch such small mismatches, and binutils never even warned about it either. This new binutils version thus breaks the Xen build on all upstream kernels since v2.6.27, out of the blue. This makes a straightforward Git bisection of all 64-bit Xen-enabled kernels impossible on such binutils, for a bisection window of over hundred thousand historic commits. (!) This is a major fail on the side of binutils and binutils needs to turn this show-stopper build failure into a warning ASAP. ] Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jan Beulich <jbeulich@novell.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <kees.cook@canonical.com> LKML-Reference: <1299877178-26063-1-git-send-email-heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86, quirk: Fix SB600 revision checkAndreas Herrmann
commit 1d3e09a304e6c4e004ca06356578b171e8735d3c upstream. Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) introduced a regression. It removed some SB600 specific code to determine the revision ID without adapting a corresponding revision ID check for SB600. See this mail thread: http://marc.info/?l=linux-kernel&m=129980296006380&w=2 This patch adapts the corresponding check to cover all SB600 revisions. Tested-by: Wang Lei <f3d27b@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20110315143137.GD29499@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: Emit "mem=nopentium ignored" warning when not supportedKamal Mostafa
commit 9a6d44b9adb777ca9549e88cd55bd8f2673c52a2 upstream. Emit warning when "mem=nopentium" is specified on any arch other than x86_32 (the only that arch supports it). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-2-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: Fix panic when handling "mem={invalid}" paramKamal Mostafa
commit 77eed821accf5dd962b1f13bed0680e217e49112 upstream. Avoid removing all of memory and panicing when "mem={invalid}" is specified, e.g. mem=blahblah, mem=0, or mem=nopentium (on platforms other than x86_32). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-1-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-02x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systemsAndreas Herrmann
commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 upstream. On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-02x86/pvclock: Zero last_value on resumeJeremy Fitzhardinge
commit e7a3481c0246c8e45e79c629efd63b168e91fcda upstream. If the guest domain has been suspend/resumed or migrated, then the system clock backing the pvclock clocksource may revert to a smaller value (ie, can be non-monotonic across the migration/save-restore). Make sure we zero last_value in that case so that the domain continues to see clock updates. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-02x86, hpet: Disable per-cpu hpet timer if ARAT is supportedShaohua Li
commit 39fe05e58c5e448601ce46e6b03900d5bf31c4b0 upstream. If CPU support always running local APIC timer, per-cpu hpet timer could be disabled, which is useless and wasteful in such case. Let's leave the timers to others. The effect is that we reserve less timers. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: venkatesh.pallipadi@intel.com LKML-Reference: <20090812031612.GA10062@sli10-desk.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17x86: Add IRQ_TIME_ACCOUNTINGVenkatesh Pallipadi
Commit: e82b8e4ea4f3dffe6e7939f90e78da675fcc450e upstream This patch adds IRQ_TIME_ACCOUNTING option on x86 and runtime enables it when TSC is enabled. This change just enables fine grained irq time accounting, isn't used yet. Following patches use it for different purposes. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-6-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platformsSuresh Siddha
commit f7448548a9f32db38f243ccd4271617758ddfe2c upstream. Markus Kohn ran into a hard hang regression on an acer aspire 1310, when acpi is enabled. git bisect showed the following commit as the bad one that introduced the boot regression. commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3 Author: Suresh Siddha <suresh.b.siddha@intel.com> Date: Wed Aug 19 18:05:36 2009 -0700 x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init Because of the UP configuration of that platform, native_smp_prepare_cpus() bailed out (in smp_sanity_check()) before doing the set_mtrr_aps_delayed_init() Further down the boot path, native_smp_cpus_done() will call the delayed MTRR initialization for the AP's (mtrr_aps_init()) with mtrr_aps_delayed_init not set. This resulted in the boot processor reprogramming its MTRR's to the values seen during the start of the OS boot. While this is not needed ideally, this shouldn't have caused any side-effects. This is because the reprogramming of MTRR's (set_mtrr_state() that gets called via set_mtrr()) will check if the live register contents are different from what is being asked to write and will do the actual write only if they are different. BP's mtrr state is read during the start of the OS boot and typically nothing would have changed when we ask to reprogram it on BP again because of the above scenario on an UP platform. So on a normal UP platform no reprogramming of BP MTRR MSR's happens and all is well. However, on this platform, bios seems to be modifying the fixed mtrr range registers between the start of OS boot and when we double check the live registers for reprogramming BP MTRR registers. And as the live registers are modified, we end up reprogramming the MTRR's to the state seen during the start of the OS boot. During ACPI initialization, something in the bios (probably smi handler?) don't like this fact and results in a hard lockup. We didn't see this boot hang issue on this platform before the commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3, because only the AP's (if any) will program its MTRR's to the value that BP had at the start of the OS boot. Fix this issue by checking mtrr_aps_delayed_init before continuing further in the mtrr_aps_init(). Now, only AP's (if any) will program its MTRR's to the BP values during boot. Addresses https://bugzilla.novell.com/show_bug.cgi?id=623393 [ By the way, this behavior of the bios modifying MTRR's after the start of the OS boot is not common and the kernel is not prepared to handle this situation well. Irrespective of this issue, during suspend/resume, linux kernel will try to reprogram the BP's MTRR values to the values seen during the start of the OS boot. So suspend/resume might be already broken on this platform for all linux kernel versions. ] Reported-and-bisected-by: Markus Kohn <jabber@gmx.org> Tested-by: Markus Kohn <jabber@gmx.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Thomas Renninger <trenn@novell.com> Cc: Rafael Wysocki <rjw@novell.com> Cc: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <1296694975.4418.402.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic modeKenji Kaneshige
commit 086e8ced65d9bcc4a8e8f1cd39b09640f2883f90 upstream. In x2apic mode, we need to set the upper address register of the fault handling interrupt register of the vt-d hardware. Without this irq migration of the vt-d fault handling interrupt is broken. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> LKML-Reference: <1291225233.2648.39.camel@sbsiddha-MOBL3> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Tested-by: Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07x86: Enable the intr-remap fault handling after local APIC setupKenji Kaneshige
commit 7f7fbf45c6b748074546f7f16b9488ca71de99c1 upstream. Interrupt-remapping gets enabled very early in the boot, as it determines the apic mode that the processor can use. And the current code enables the vt-d fault handling before the setup_local_APIC(). And hence the APIC LDR registers and data structure in the memory may not be initialized. So the vt-d fault handling in logical xapic/x2apic modes were broken. Fix this by enabling the vt-d fault handling in the end_local_APIC_setup() A cleaner fix of enabling fault handling while enabling intr-remapping will be addressed for v2.6.38. [ Enabling intr-remapping determines the usage of x2apic mode and the apic mode determines the fault-handling configuration. ] Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> LKML-Reference: <20101201062244.541996375@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07x86, amd: Fix panic on AMD CPU family 0x15Andreas Herrmann
[The mainline kernel doesn't have this problem. Commit "(23588c3) x86, amd: Add support for CPUID topology extension of AMD CPUs" removed the family check. But 2.6.32.y needs to be fixed.] This CPU family check is not required -- existence of the NodeId MSR is indicated by a CPUID feature flag which is already checked in amd_fixup_dcm() -- and it needlessly prevents amd_fixup_dcm() to be called for newer AMD CPUs. In worst case this can lead to a panic in the scheduler code for AMD family 0x15 multi-node AMD CPUs. I just have a picture of VGA console output so I can't copy-and-paste it herein, but the call stack of such a panic looked like: do_divide_error ... find_busiest_group run_rebalance_domains ... apic_timer_interrupt ... cpu_idle The mainline kernel doesn't have this problem. Commit "(23588c3) x86, amd: Add support for CPUID topology extension of AMD CPUs" removed the family check. But 2.6.32.y needs to be fixed. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07x86, hotplug: Use mwait to offline a processor, fix the legacy caseH. Peter Anvin
upstream ea53069231f9317062910d6e772cca4ce93de8c8 x86, hotplug: Use mwait to offline a processor, fix the legacy case Here included also some small follow-on patches to the same code: upstream a68e5c94f7d3dd64fef34dd5d97e365cae4bb42a x86, hotplug: Move WBINVD back outside the play_dead loop upstream ce5f68246bf2385d6174856708d0b746dc378f20 x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line https://bugzilla.kernel.org/show_bug.cgi?id=5471 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampolineHugh Dickins
commit b7d460897739e02f186425b7276e3fdb1595cea7 upstream. rc2 kernel crashes when booting second cpu on this CONFIG_VMSPLIT_2G_OPT laptop: whereas cloning from kernel to low mappings pgd range does need to limit by both KERNEL_PGD_PTRS and KERNEL_PGD_BOUNDARY, cloning kernel pgd range itself must not be limited by the smaller KERNEL_PGD_BOUNDARY. Signed-off-by: Hugh Dickins <hughd@google.com> LKML-Reference: <alpine.LSU.2.00.1008242235120.2515@sister.anvils> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09x86-32: Separate 1:1 pagetables from swapper_pg_dirJoerg Roedel
commit fd89a137924e0710078c3ae855e7cec1c43cb845 upstream. This patch fixes machine crashes which occur when heavily exercising the CPU hotplug codepaths on a 32-bit kernel. These crashes are caused by AMD Erratum 383 and result in a fatal machine check exception. Here's the scenario: 1. On 32-bit, the swapper_pg_dir page table is used as the initial page table for booting a secondary CPU. 2. To make this work, swapper_pg_dir needs a direct mapping of physical memory in it (the low mappings). By adding those low, large page (2M) mappings (PAE kernel), we create the necessary conditions for Erratum 383 to occur. 3. Other CPUs which do not participate in the off- and onlining game may use swapper_pg_dir while the low mappings are present (when leave_mm is called). For all steps below, the CPU referred to is a CPU that is using swapper_pg_dir, and not the CPU which is being onlined. 4. The presence of the low mappings in swapper_pg_dir can result in TLB entries for addresses below __PAGE_OFFSET to be established speculatively. These TLB entries are marked global and large. 5. When the CPU with such TLB entry switches to another page table, this TLB entry remains because it is global. 6. The process then generates an access to an address covered by the above TLB entry but there is a permission mismatch - the TLB entry covers a large global page not accessible to userspace. 7. Due to this permission mismatch a new 4kb, user TLB entry gets established. Further, Erratum 383 provides for a small window of time where both TLB entries are present. This results in an uncorrectable machine check exception signalling a TLB multimatch which panics the machine. There are two ways to fix this issue: 1. Always do a global TLB flush when a new cr3 is loaded and the old page table was swapper_pg_dir. I consider this a hack hard to understand and with performance implications 2. Do not use swapper_pg_dir to boot secondary CPUs like 64-bit does. This patch implements solution 2. It introduces a trampoline_pg_dir which has the same layout as swapper_pg_dir with low_mappings. This page table is used as the initial page table of the booting CPU. Later in the bringup process, it switches to swapper_pg_dir and does a global TLB flush. This fixes the crashes in our test cases. -v2: switch to swapper_pg_dir right after entering start_secondary() so that we are able to access percpu data which might not be mapped in the trampoline page table. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> LKML-Reference: <20100816123833.GB28147@aftab> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09x86, UV: Fix initialization of max_pnodeJack Steiner
commit 36ac4b987bea9a95217e1af552252f275ca7fc44 upstream. Fix calculation of "max_pnode" for systems where the the highest blade has neither cpus or memory. (And, yes, although rare this does occur). Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100910150808.GA19802@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09x86, UV: Delete unneeded boot messagesJack Steiner
commit 2acebe9ecb2b77876e87a1480729cfb2db4570dd upstream. SGI:UV: Delete extra boot messages that describe the system topology. These messages are no longer useful. Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100317154038.GA29346@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09acpi-cpufreq: fix a memleak when unloading driverZhang Rui
commit dab5fff14df2cd16eb1ad4c02e83915e1063fece upstream. We didn't free per_cpu(acfreq_data, cpu)->freq_table when acpi_freq driver is unloaded. Resulting in the following messages in /sys/kernel/debug/kmemleak: unreferenced object 0xf6450e80 (size 64): comm "modprobe", pid 1066, jiffies 4294677317 (age 19290.453s) hex dump (first 32 bytes): 00 00 00 00 e8 a2 24 00 01 00 00 00 00 9f 24 00 ......$.......$. 02 00 00 00 00 6a 18 00 03 00 00 00 00 35 0c 00 .....j.......5.. backtrace: [<c123ba97>] kmemleak_alloc+0x27/0x50 [<c109f96f>] __kmalloc+0xcf/0x110 [<f9da97ee>] acpi_cpufreq_cpu_init+0x1ee/0x4e4 [acpi_cpufreq] [<c11cd8d2>] cpufreq_add_dev+0x142/0x3a0 [<c11920b7>] sysdev_driver_register+0x97/0x110 [<c11cce56>] cpufreq_register_driver+0x86/0x140 [<f9dad080>] 0xf9dad080 [<c1001130>] do_one_initcall+0x30/0x160 [<c10626e9>] sys_init_module+0x99/0x1e0 [<c1002d97>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff https://bugzilla.kernel.org/show_bug.cgi?id=15807#c21 Tested-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09x86: AMD Northbridge: Verify NB's node is onlinePrarit Bhargava
commit 303fc0870f8fbfabe260c5c32b18e53458d597ea upstream. Fix panic seen on some IBM and HP systems on 2.6.32-rc6: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8120bf3f>] find_next_bit+0x77/0x9c [...] [<ffffffff8120bbde>] cpumask_next_and+0x2e/0x3b [<ffffffff81225c62>] pci_device_probe+0x8e/0xf5 [<ffffffff812b9be6>] ? driver_sysfs_add+0x47/0x6c [<ffffffff812b9da5>] driver_probe_device+0xd9/0x1f9 [<ffffffff812b9f1d>] __driver_attach+0x58/0x7c [<ffffffff812b9ec5>] ? __driver_attach+0x0/0x7c [<ffffffff812b9298>] bus_for_each_dev+0x54/0x89 [<ffffffff812b9b4f>] driver_attach+0x19/0x1b [<ffffffff812b97ae>] bus_add_driver+0xd3/0x23d [<ffffffff812ba1e7>] driver_register+0x98/0x109 [<ffffffff81225ed0>] __pci_register_driver+0x63/0xd3 [<ffffffff81072776>] ? up_read+0x26/0x2a [<ffffffffa0081000>] ? k8temp_init+0x0/0x20 [k8temp] [<ffffffffa008101e>] k8temp_init+0x1e/0x20 [k8temp] [<ffffffff8100a073>] do_one_initcall+0x6d/0x185 [<ffffffff8108d765>] sys_init_module+0xd3/0x236 [<ffffffff81011ac2>] system_call_fastpath+0x16/0x1b I put in a printk and commented out the set_dev_node() call when and got this output: quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x0 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x1 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x2 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x3 I.e. the issue appears to be that the HW has set val to a valid value, however, the system is only configured for a single node -- 0, the others are offline. Check to see if the node is actually online before setting the numa node for an AMD northbridge in quirk_amd_nb_node(). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: bhavna.sarathy@amd.com Cc: jbarnes@virtuousgeek.org Cc: andreas.herrmann3@amd.com LKML-Reference: <20091112180933.12532.98685.sendpatchset@prarit.bos.redhat.com> [ v2: clean up the code and add comments ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22x86, kdump: Change copy_oldmem_page() to use cached addressingCliff Wickman
commit 37a2f9f30a360fb03522d15c85c78265ccd80287 upstream. The copy of /proc/vmcore to a user buffer proceeds much faster if the kernel addresses memory as cached. With this patch we have seen an increase in transfer rate from less than 15MB/s to 80-460MB/s, depending on size of the transfer. This makes a big difference in time needed to save a system dump. Signed-off-by: Cliff Wickman <cpw@sgi.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: kexec@lists.infradead.org LKML-Reference: <E1OtMLz-0001yp-Ia@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22x86, intr-remap: Set redirection hint in the IRTESuresh Siddha
commit 75e3cfbed6f71a8f151dc6e413b6ce3c390030cb upstream. Currently the redirection hint in the interrupt-remapping table entry is set to 0, which means the remapped interrupt is directed to the processors listed in the destination. So in logical flat mode in the presence of intr-remapping, this results in a single interrupt multi-casted to multiple cpu's as specified by the destination bit mask. But what we really want is to send that interrupt to one of the cpus based on the lowest priority delivery mode. Set the redirection hint in the IRTE to '1' to indicate that we want the remapped interrupt to be directed to only one of the processors listed in the destination. This fixes the issue of same interrupt getting delivered to multiple cpu's in the logical flat mode in the presence of interrupt-remapping. While there is no functional issue observed with this behavior, this will impact performance of such configurations (<=8 cpu's using logical flat mode in the presence of interrupt-remapping) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100827181049.013051492@sbsiddha-MOBL3.sc.intel.com> Cc: Weidong Han <weidong.han@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUsAndreas Herrmann
commit 3fdbf004c1706480a7c7fac3c9d836fa6df20d7d upstream. Instead of adapting the CPU family check in amd_special_default_mtrr() for each new CPU family assume that all new AMD CPUs support the necessary bits in SYS_CFG MSR. Tom2Enabled is architectural (defined in APM Vol.2). Tom2ForceMemTypeWB is defined in all BKDGs starting with K8 NPT. In pre K8-NPT BKDG this bit is reserved (read as zero). W/o this adaption Linux would unnecessarily complain about bad MTRR settings on every new AMD CPU family, e.g. [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 4863MB of RAM. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930123235.GB20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22x86, olpc: Don't retry EC commands foreverPaul Fox
commit 286e5b97eb22baab9d9a41ca76c6b933a484252c upstream. Avoids a potential infinite loop. It was observed once, during an EC hacking/debugging session - not in regular operation. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: dilinger@queued.net Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22x86, kexec: Make sure to stop all CPUs before exiting the kernelAlok Kataria
commit 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce upstream. x86 smp_ops now has a new op, stop_other_cpus which takes a parameter "wait" this allows the caller to specify if it wants to stop until all the cpus have processed the stop IPI. This is required specifically for the kexec case where we should wait for all the cpus to be stopped before starting the new kernel. We now wait for the cpus to stop in all cases except for panic/kdump where we expect things to be broken and we are doing our best to make things work anyway. This patch fixes a legitimate regression, which was introduced during 2.6.30, by commit id 4ef702c10b5df18ab04921fc252c26421d4d6c75. Signed-off-by: Alok N Kataria <akataria@vmware.com> LKML-Reference: <1286833028.1372.20.camel@ank32.eng.vmware.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22mm, x86: Saving vmcore with non-lazy freeing of vmasCliff Wickman
commit 3ee48b6af49cf534ca2f481ecc484b156a41451d upstream. During the reading of /proc/vmcore the kernel is doing ioremap()/iounmap() repeatedly. And the buildup of un-flushed vm_area_struct's is causing a great deal of overhead. (rb_next() is chewing up most of that time). This solution is to provide function set_iounmap_nonlazy(). It causes a subsequent call to iounmap() to immediately purge the vma area (with try_purge_vmap_area_lazy()). With this patch we have seen the time for writing a 250MB compressed dump drop from 71 seconds to 44 seconds. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: kexec@lists.infradead.org LKML-Reference: <E1OwHZ4-0005WK-Tw@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86: detect scattered cpuid features earlierJacob Pan
commit 1dedefd1a066a795a87afca9c0236e1a94de9bf6 upstream. Some extra CPU features such as ARAT is needed in early boot so that x86_init function pointers can be set up properly. http://lkml.org/lkml/2010/5/18/519 At start_kernel() level, this patch moves init_scattered_cpuid_features() from check_bugs() to setup_arch() -> early_cpu_init() which is earlier than platform specific x86_init layer setup. Suggested by HPA. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1274295685-6774-2-git-send-email-jacob.jun.pan@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration orderBorislav Petkov
commit 6dcbfe4f0b4e17e289d56fa534b7ce5a6b7f63a3 upstream. This fixes possible cases of not collecting valid error info in the MCE error thresholding groups on F10h hardware. The current code contains a subtle problem of checking only the Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM thresholding group) in its first iteration and breaking out if the bit is cleared. But (!), this MSR contains an offset value, BlkPtr[31:24], which points to the remaining MSRs in this thresholding group which might contain valid information too. But if we bail out only after we checked the valid bit in the first MSR and not the block pointer too, we miss that other information. The thing is, MC4_MISC0[BlkPtr] is not predicated on MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked prior to iterating over the MCI_MISCj thresholding group, irrespective of the MC4_MISC0[Valid] setting. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86, irq: Plug memory leak in sparse irqThomas Gleixner
commit 1cf180c94e9166cda083ff65333883ab3648e852 upstream. free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this triggers a use after free caused by the fact that copying struct irq_cfg is done with memcpy, which copies the pointer not the cpumask. Fix both places. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86, hpet: Fix bogus error check in hpet_assign_irq()Thomas Gleixner
commit 021989622810b02aab4b24f91e1f5ada2b654579 upstream. create_irq() returns -1 if the interrupt allocation failed, but the code checks for irq == 0. Use create_irq_nr() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28tracing/x86: Don't use mcount in kvmclock.cSteven Rostedt
commit 258af47479980d8238a04568b94a4e55aa1cb537 upstream. The guest can use the paravirt clock in kvmclock.c which is used by sched_clock(), which in turn is used by the tracing mechanism for timestamps, which leads to infinite recursion. Disable mcount/tracing for kvmclock.o. Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28tracing/x86: Don't use mcount in pvclock.cJeremy Fitzhardinge
commit 9ecd4e1689208afe9b059a5ce1333acb2f42c4d2 upstream. When using a paravirt clock, pvclock.c can be used by sched_clock(), which in turn is used by the tracing mechanism for timestamps, which leads to infinite recursion. Disable mcount/tracing for pvclock.o. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> LKML-Reference: <4C9A9A3F.4040201@goop.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86/amd-iommu: Work around S3 BIOS bugJoerg Roedel
commit 4c894f47bb49284008073d351c0ddaac8860864e upstream. This patch adds a workaround for an IOMMU BIOS problem to the AMD IOMMU driver. The result of the bug is that the IOMMU does not execute commands anymore when the system comes out of the S3 state resulting in system failure. The bug in the BIOS is that is does not restore certain hardware specific registers correctly. This workaround reads out the contents of these registers at boot time and restores them on resume from S3. The workaround is limited to the specific IOMMU chipset where this problem occurs. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86/amd-iommu: Fix rounding-bug in __unmap_singleJoerg Roedel
commit 04e0463e088b41060c08c255eb0d3278a504f094 upstream. In the __unmap_single function the dma_addr is rounded down to a page boundary before the dma pages are unmapped. The address is later also used to flush the TLB entries for that mapping. But without the offset into the dma page the amount of pages to flush might be miscalculated in the TLB flushing path. This patch fixes this bug by using the original address to flush the TLB. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86/amd-iommu: Set iommu configuration flags in enable-loopJoerg Roedel
commit e9bf51971157e367aabfc111a8219db010f69cd4 upstream. This patch moves the setting of the configuration and feature flags out out the acpi table parsing path and moves it into the iommu-enable path. This is needed to reliably fix resume-from-s3. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28x86, cpu: After uncapping CPUID, re-run CPU feature detectionH. Peter Anvin
commit d900329e20f4476db6461752accebcf7935a8055 upstream. After uncapping the CPUID level, we need to also re-run the CPU feature detection code. This resolves kernel bugzilla 16322. Reported-by: boris64 <bugzilla.kernel.org@boris64.net> LKML-Reference: <tip-@git.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20x86, tsc: Fix a preemption leak in restore_sched_clock_state()Peter Zijlstra
commit 55496c896b8a695140045099d4e0175cf09d4eae upstream. Doh, a real life genuine preemption leak.. This caused a suspend failure. Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nico Schottelius <nico-linux-20100709@schottelius.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Florian Pritz <flo@xssn.at> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Len Brown <lenb@kernel.org> sleep states LKML-Reference: <1284150773.402.122.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()Ben Hutchings
commit 30da55242818a8ca08583188ebcbaccd283ad4d9 upstream. commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove unsafe and unnecessary hardware access" changed read_msi_msg_desc() to return the last MSI message written instead of reading it from the device, since it may be called while the device is in a reduced power state. However, the pSeries platform code really does need to read messages from the device, since they are initially written by firmware. Therefore: - Restore the previous behaviour of read_msi_msg_desc() - Add new functions get_cached_msi_msg{,_desc}() which return the last MSI message written - Use the new functions where appropriate Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20x86, tsc, sched: Recompute cyc2ns_offset's during resume from sleep statesSuresh Siddha
commit cd7240c0b900eb6d690ccee088a6c9b46dae815a upstream. TSC's get reset after suspend/resume (even on cpu's with invariant TSC which runs at a constant rate across ACPI P-, C- and T-states). And in some systems BIOS seem to reinit TSC to arbitrary large value (still sync'd across cpu's) during resume. This leads to a scenario of scheduler rq->clock (sched_clock_cpu()) less than rq->age_stamp (introduced in 2.6.32). This leads to a big value returned by scale_rt_power() and the resulting big group power set by the update_group_power() is causing improper load balancing between busy and idle cpu's after suspend/resume. This resulted in multi-threaded workloads (like kernel-compilation) go slower after suspend/resume cycle on core i5 laptops. Fix this by recomputing cyc2ns_offset's during resume, so that sched_clock() continues from the point where it was left off during suspend. Reported-by: Florian Pritz <flo@xssn.at> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1282262618.2675.24.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26x86, apic: ack all pending irqs when crashed/on kexecKerstin Jonsson
commit 8c3ba8d049247dc06b6dcee1711a11b26647aa44 upstream. When the SMP kernel decides to crash_kexec() the local APICs may have pending interrupts in their vector tables. The setup routine for the local APIC has a deficient mechanism for clearing these interrupts, it only handles interrupts that has already been dispatched to the local core for servicing (the ISR register) safely, it doesn't consider lower prioritized queued interrupts stored in the IRR register. If you have more than one pending interrupt within the same 32 bit word in the LAPIC vector table registers you may find yourself entering the IO APIC setup with pending interrupts left in the LAPIC. This is a situation for wich the IO APIC setup is not prepared. Depending of what/which interrupt vector/vectors are stuck in the APIC tables your system may show various degrees of malfunctioning. That was the reason why the check_timer() failed in our system, the timer interrupts was blocked by pending interrupts from the old kernel when routed trough the IO APIC. Additional comment from Jiri Bohac: ============== If this should go into stable release, I'd add some kind of limit on the number of iterations, just to be safe from hard to debug lock-ups: +if (loops++ > MAX_LOOPS) { + printk("LAPIC pending clean-up") + break; +} while (queued); with MAX_LOOPS something like 1E9 this would leave plenty of time for the pending IRQs to be cleared and would and still cause at most a second of delay if the loop were to lock-up for whatever reason. [trenn@suse.de: V2: Use tsc if avail to bail out after 1 sec due to possible virtual apic_read calls which may take rather long (suggested by: Avi Kivity <avi@redhat.com>) If no tsc is available bail out quickly after cpu_khz, if we broke out too early and still have irqs pending (which should never happen?) we still get a WARN_ON... V3: - Fixed indentation -> checkpatch clean - max_loops must be signed V4: - Fix typo, mixed up tsc and ntsc in first rdtscll() call V5: Adjust WARN_ON() condition to also catch error in cpu_has_tsc case] Cc: <jbohac@novell.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Kerstin Jonsson <kerstin.jonsson@ericsson.com> Cc: Avi Kivity <avi@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Thomas Renninger <trenn@suse.de> LKML-Reference: <201005241913.o4OJDGWM010865@imap1.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26x86, apic: Fix apic=debug boot crashDaniel Kiper
commit 05e407603e527f9d808dd3866d3a17c2ce4dfcc5 upstream. Fix a boot crash when apic=debug is used and the APIC is not properly initialized. This issue appears during Xen Dom0 kernel boot but the fix is generic and the crash could occur on real hardware as well. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> Cc: xen-devel@lists.xensource.com Cc: konrad.wilk@oracle.com Cc: jeremy@goop.org LKML-Reference: <20100819224616.GB9967@router-fw-old.local.net-space.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issuesBorislav Petkov
commit d7c53c9e822a4fefa13a0cae76f3190bfd0d5c11 upstream. When testing cpu hotplug code on 32-bit we kept hitting the "CPU%d: Stuck ??" message due to multiple cores concurrently accessing the cpu_callin_mask, among others. Since these codepaths are not protected from concurrent access due to the fact that there's no sane reason for making an already complex code unnecessarily more complex - we hit the issue only when insanely switching cores off- and online - serialize hotplugging cores on the sysfs level and be done with it. [ v2.1: fix !HOTPLUG_CPU build ] Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100819181029.GC17171@aftab> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13x86: Fix out of order of gsiEric W. Biederman
commit fad539956c9e69749a03f7817d22d1bab87657bf upstream. Iranna D Ankad reported that IBM x3950 systems have boot problems after this commit: | | commit b9c61b70075c87a8612624736faf4a2de5b1ed30 | | x86/pci: update pirq_enable_irq() to setup io apic routing | The problem is that with the patch, the machine freezes when console=ttyS0,... kernel serial parameter is passed. It seem to freeze at DVD initialization and the whole problem seem to be DVD/pata related, but somehow exposed through the serial parameter. Such apic problems can expose really weird behavior: ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[0]) IOAPIC[0]: apic_id 16, version 0, address 0xfecff000, GSI 0-2 ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[3]) IOAPIC[1]: apic_id 15, version 0, address 0xfec00000, GSI 3-38 ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[39]) IOAPIC[2]: apic_id 14, version 0, address 0xfec01000, GSI 39-74 ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 4 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 5 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 6 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 7 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 6 global_irq 9 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 10 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 11 low edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 12 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 12 global_irq 15 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 13 global_irq 16 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 17 low edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 18 dfl dfl) It turns out that the system has three io apic controllers, but boot ioapic routing is in the second one, and that gsi_base is not 0 - it is using a bunch of INT_SRC_OVR... So these recent changes: 1. one set routing for first io apic controller 2. assume irq = gsi ... will break that system. So try to remap those gsis, need to seperate boot_ioapic_idx detection out of enable_IO_APIC() and call them early. So introduce boot_ioapic_idx, and remap_ioapic_gsi()... -v2: shift gsi with delta instead of gsi_base of boot_ioapic_idx -v3: double check with find_isa_irq_apic(0, mp_INT) to get right boot_ioapic_idx -v4: nr_legacy_irqs -v5: add print out for boot_ioapic_idx, and also make it could be applied for current kernel and previous kernel -v6: add bus_irq, in acpi_sci_ioapic_setup, so can get overwride for sci right mapping... -v7: looks like pnpacpi get irq instead of gsi, so need to revert them back... -v8: split into two patches -v9: according to Eric, use fixed 16 for shifting instead of remap -v10: still need to touch rsparser.c -v11: just revert back to way Eric suggest... anyway the ioapic in first ioapic is blocked by second... -v12: two patches, this one will add more loop but check apic_id and irq > 16 Reported-by: Iranna D Ankad <iranna.ankad@in.ibm.com> Bisected-by: Iranna D Ankad <iranna.ankad@in.ibm.com> Tested-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: len.brown@intel.com LKML-Reference: <4B8A321A.1000008@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13timekeeping: Fix clock_gettime vsyscall time warpLin Ming
commit 0696b711e4be45fa104c12329f617beb29c03f78 upstream. Since commit 0a544198 "timekeeping: Move NTP adjusted clock multiplier to struct timekeeper" the clock multiplier of vsyscall is updated with the unmodified clock multiplier of the clock source and not with the NTP adjusted multiplier of the timekeeper. This causes user space observerable time warps: new CLOCK-warp maximum: 120 nsecs, 00000025c337c537 -> 00000025c337c4bf Add a new argument "mult" to update_vsyscall() and hand in the timekeeping internal NTP adjusted multiplier. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: "Zhang Yanmin" <yanmin_zhang@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> LKML-Reference: <1258436990.17765.83.camel@minggr.sh.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13x86, vmware: Preset lpj values when on VMware.Alok Kataria
commit 9f242dc10e0c3c1eb32d8c83c18650a35fd7f80d upstream. When running on VMware's platform, we have seen situations where the AP's try to calibrate the lpj values and fail to get good calibration runs becasue of timing issues. As a result delays don't work correctly on all cpus. The solutions is to set preset_lpj value based on the current tsc frequency value. This is similar to what KVM does as well. Signed-off-by: Alok N Kataria <akataria@vmware.com> LKML-Reference: <1280790637.14933.29.camel@ank32.eng.vmware.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02ACPI: Unconditionally set SCI_EN on resumeMatthew Garrett
commit b6dacf63e9fb2e7a1369843d6cef332f76fca6a3 upstream. The ACPI spec tells us that the firmware will reenable SCI_EN on resume. Reality disagrees in some cases. The ACPI spec tells us that the only way to set SCI_EN is via an SMM call. https://bugzilla.kernel.org/show_bug.cgi?id=13745 shows us that doing so may break machines. Tracing the ACPI calls made by Windows shows that it unconditionally sets SCI_EN on resume with a direct register write, and therefore the overwhelming probability is that everything is fine with this behaviour. Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02ACPI: skip checking BM_STS if the BIOS doesn't ask for itLen Brown
commit 718be4aaf3613cf7c2d097f925abc3d3553c0605 upstream. It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02x86: Do not try to disable hpet if it hasn't been initialized beforeStefano Stabellini
commit ff4878089e1eaeac79d57878ad4ea32910fb4037 upstream. hpet_disable is called unconditionally on machine reboot if hpet support is compiled in the kernel. hpet_disable only checks if the machine is hpet capable but doesn't make sure that hpet has been initialized. [ tglx: Made it a one liner and removed the redundant hpet_address check ] Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.DEB.2.00.1007211726240.22235@kaball-desktop> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02x86: Fix x2apic preenabled system with kexecYinghai Lu
commit fd19dce7ac07973f700b0f13fb7f94b951414a4c upstream. Found one x2apic system kexec loop test failed when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip) first kernel can kexec second kernel, but second kernel can not kexec third one. it can be duplicated on another system with BIOS preenabled x2apic. First kernel can not kexec second kernel. It turns out, when kernel boot with pre-enabled x2apic, it will not execute disable_local_APIC on shutdown path. when init_apic_mappings() is called in setup_arch, it will skip setting of apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic()) Then later, disable_local_APIC() will bail out early because !apic_phys. So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys. another solution could be updating init_apic_mappings() to set apic_phys even for preenabled x2apic system. Actually even for x2apic system, that lapic address is mapped already in early stage. BTW: is there any x2apic preenabled system with apicid of boot cpu > 255? Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4C3EB22B.3000701@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02x86, Calgary: Limit the max PHB number to 256Darrick J. Wong
commit d596043d71ff0d7b3d0bead19b1d68c55f003093 upstream. The x3950 family can have as many as 256 PCI buses in a single system, so change the limits to the maximum. Since there can only be 256 PCI buses in one domain, we no longer need the BUG_ON check. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> LKML-Reference: <20100701004519.GQ15515@tux1.beaverton.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02x86, Calgary: Increase max PHB numberDarrick J. Wong
commit 499a00e92dd9a75395081f595e681629eb1eebad upstream. Newer systems (x3950M2) can have 48 PHBs per chassis and 8 chassis, so bump the limits up and provide an explanation of the requirements for each class. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Corinna Schultz <cschultz@linux.vnet.ibm.com> LKML-Reference: <20100624212647.GI15515@tux1.beaverton.ibm.com> [ v2: Fixed build bug, added back PHBS_PER_CALGARY == 4 ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 23:21:59 +0000