summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2014-06-30x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)Andy Lutomirski
commit 554086d85e71f30abe46fc014fea31929a7c6a8a upstream. The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bba0 i386 syscall audit fast-path Cc: Roland McGrath <roland@redhat.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30x86-32, espfix: Remove filter for espfix32 due to raceH. Peter Anvin
commit 246f2d2ee1d715e1077fc47d61c394569c8ee692 upstream. It is not safe to use LAR to filter when to go down the espfix path, because the LDT is per-process (rather than per-thread) and another thread might change the descriptors behind our back. Fortunately it is always *safe* (if a bit slow) to go down the espfix path, and a 32-bit LDT stack segment is extremely rare. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-08Revert "x86/smpboot: Initialize secondary CPU only if master CPU will wait ↵Linus Torvalds
for it" This reverts commit 3e1a878b7ccdb31da6d9d2b855c72ad87afeba3f. It came in very late, and already has one reported failure: Sitsofe reports that the current tree fails to boot on his EeePC, and bisected it down to this. Rather than waste time trying to figure out what's wrong, just revert it. Reported-by: Sitsofe Wheeler <sitsofe@gmail.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05x86/smpboot: Initialize secondary CPU only if master CPU will wait for itIgor Mammedov
Hang is observed on virtual machines during CPU hotplug, especially in big guests with many CPUs. (It reproducible more often if host is over-committed). It happens because master CPU gives up waiting on secondary CPU and allows it to run wild. As result AP causes locking or crashing system. For example as described here: https://lkml.org/lkml/2014/3/6/257 If master CPU have sent STARTUP IPI successfully, and AP signalled to master CPU that it's ready to start initialization, make master CPU wait indefinitely till AP is onlined. To ensure that AP won't ever run wild, make it wait at early startup till master CPU confirms its intention to wait for AP. If AP doesn't respond in 10 seconds, the master CPU will timeout and cancel AP onlining. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1401975765-22328-4-git-send-email-imammedo@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05x86/smpboot: Log error on secondary CPU wakeup failure at ERR levelIgor Mammedov
If system is running without debug level logging, it will not log error if do_boot_cpu() failed to wakeup AP. It may lead to silent AP bringup failures at boot time. Change message level to KERN_ERR to make error visible to user as it's done on other architectures. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1401975765-22328-3-git-send-email-imammedo@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05x86: Fix list/memory corruption on CPU hotplugIgor Mammedov
currently if AP wake up is failed, master CPU marks AP as not present in do_boot_cpu() by calling set_cpu_present(cpu, false). That leads to following list corruption on the next physical CPU hotplug: [ 418.107336] WARNING: CPU: 1 PID: 45 at lib/list_debug.c:33 __list_add+0xbe/0xd0() [ 418.115268] list_add corruption. prev->next should be next (ffff88003dc57600), but was ffff88003e20c3a0. (prev=ffff88003e20c3a0). [ 418.123693] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT ipt_REJECT cfg80211 xt_conntrack rfkill ee [ 418.138979] CPU: 1 PID: 45 Comm: kworker/u10:1 Not tainted 3.14.0-rc6+ #387 [ 418.149989] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 418.165750] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 418.166433] 0000000000000021 ffff880038ca7988 ffffffff8159b22d 0000000000000021 [ 418.176460] ffff880038ca79d8 ffff880038ca79c8 ffffffff8106942c ffff880038ca79e8 [ 418.177453] ffff88003e20c3a0 ffff88003dc57600 ffff88003e20c3a0 00000000ffffffea [ 418.178445] Call Trace: [ 418.185811] [<ffffffff8159b22d>] dump_stack+0x49/0x5c [ 418.186440] [<ffffffff8106942c>] warn_slowpath_common+0x8c/0xc0 [ 418.187192] [<ffffffff81069516>] warn_slowpath_fmt+0x46/0x50 [ 418.191231] [<ffffffff8136ef51>] ? acpi_ns_get_node+0xb7/0xc7 [ 418.193889] [<ffffffff812f796e>] __list_add+0xbe/0xd0 [ 418.196649] [<ffffffff812e2aa9>] kobject_add_internal+0x79/0x200 [ 418.208610] [<ffffffff812e2e18>] kobject_add_varg+0x38/0x60 [ 418.213831] [<ffffffff812e2ef4>] kobject_add+0x44/0x70 [ 418.229961] [<ffffffff813e2c60>] device_add+0xd0/0x550 [ 418.234991] [<ffffffff813f0e95>] ? pm_runtime_init+0xe5/0xf0 [ 418.250226] [<ffffffff813e32be>] device_register+0x1e/0x30 [ 418.255296] [<ffffffff813e82a3>] register_cpu+0xe3/0x130 [ 418.266539] [<ffffffff81592be5>] arch_register_cpu+0x65/0x150 [ 418.285845] [<ffffffff81355c0d>] acpi_processor_hotadd_init+0x5a/0x9b ... Which is caused by the fact that generic_processor_info() allocates logical CPU id by calling: cpu = cpumask_next_zero(-1, cpu_present_mask); which returns id of previously failed to wake up CPU, since its bit is cleared by do_boot_cpu() and as result register_cpu() tries to register another CPU with the same id as already present but failed to be onlined CPU. Taking in account that AP will not do anything if master CPU failed to wake it up, there is no reason to mark that AP as not present and break next cpu hotplug attempts. As a side effect of not marking AP as not present, user would be allowed to online it again later. Also fix memory corruption in acpi_unmap_lsapic() if during CPU hotplug master CPU failed to wake up AP it set percpu x86_cpu_to_apicid to BAD_APICID=0xFFFF for AP. However following attempt to unplug that CPU will lead to out of bound write access to __apicid_to_node[] which is 32768 items long on x86_64 kernel. So with above fix of cpu_present_mask make sure that a present CPU has a valid APIC ID by not setting x86_cpu_to_apicid to BAD_APICID in do_boot_cpu() on failure and allow acpi_processor_remove()->acpi_unmap_lsapic() cleanly remove CPU. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1401975765-22328-2-git-send-email-imammedo@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-04x86: irq: Get correct available vectors for cpu disableYinghai Lu
check_irq_vectors_for_cpu_disable() can overestimate the number of available interrupt vectors, so the check for cpu down succeeds, but the actual cpu removal fails. It iterates from FIRST_EXTERNAL_VECTOR to NR_VECTORS, which is wrong because the systems vectors are not taken into account. Limit the search to first_system_vector instead of NR_VECTORS. The second indicator for vector availability the used_vectors bitmap is not taken into account at all. So system vectors, e.g. IA32_SYSCALL_VECTOR (0x80) and IRQ_MOVE_CLEANUP_VECTOR (0x20), are accounted as available. Add a check for the used_vectors bitmap and do not account vectors which are marked there. [ tglx: Simplified code. Rewrote changelog and code comments. ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Elliott, Robert (Server Storage)" <Elliott@hp.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1400160305-17774-2-git-send-email-prarit@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "The biggest changes are fixes for races that kept triggering Trinity crashes, plus liblockdep build fixes and smaller misc fixes. The liblockdep bits in perf/urgent are a pull mistake - they should have been in locking/urgent - but by the time I noticed other commits were added and testing was done :-/ Sorry about that" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix a race between ring_buffer_detach() and ring_buffer_attach() perf: Prevent false warning in perf_swevent_add perf: Limit perf_event_attr::sample_period to 63 bits tools/liblockdep: Remove all build files when doing make clean tools/liblockdep: Build liblockdep from tools/Makefile perf/x86/intel: Fix Silvermont's event constraints perf: Fix perf_event_init_context() perf: Fix race in removing an event
2014-05-14x86-64, modify_ldt: Make support for 16-bit segments a runtime optionLinus Torvalds
Checkin: b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels disabled 16-bit segments on 64-bit kernels due to an information leak. However, it does seem that people are genuinely using Wine to run old 16-bit Windows programs on Linux. A proper fix for this ("espfix64") is coming in the upcoming merge window, but as a temporary fix, create a sysctl to allow the administrator to re-enable support for 16-bit segments. It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If you hit this issue and care about your old Windows program more than you care about a kernel stack address information leak, you can do echo 1 > /proc/sys/abi/ldt16 as root (add it to your startup scripts), and you should be ok. The sysctl table is only added if you have COMPAT support enabled on x86-64, but I assume anybody who runs old windows binaries very much does that ;) Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com Cc: <stable@vger.kernel.org>
2014-05-11x86, rdrand: When nordrand is specified, disable RDSEED as wellH. Peter Anvin
One can logically expect that when the user has specified "nordrand", the user doesn't want any use of the CPU random number generator, neither RDRAND nor RDSEED, so disable both. Reported-by: Stephan Mueller <smueller@chronox.de> Cc: Theodore Ts'o <tytso@mit.edu> Link: http://lkml.kernel.org/r/21542339.0lFnPSyGRS@myon.chronox.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-09x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()Boris Ostrovsky
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall() may lose upper bits or, worse, add them since compiler will do this: (u64)(tk->wall_to_monotonic.tv_nsec << tk->shift) instead of ((u64)tk->wall_to_monotonic.tv_nsec << tk->shift) So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in the subsequent 'while' loop. We need an explicit cast. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.com Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # v3.14 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-05-08x86/intel: Add quirk to disable HPET for the Baytrail platformFeng Tang
HPET on current Baytrail platform has accuracy problem to be used as reliable clocksource/clockevent, so add a early quirk to disable it. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1398327498-13163-2-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-08x86/hpet: Make boot_hpet_disable externFeng Tang
HPET on some platform has accuracy problem. Making "boot_hpet_disable" extern so that we can runtime disable the HPET timer by using quirk to check the platform. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1398327498-13163-1-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07perf/x86/intel: Fix Silvermont's event constraintsYan, Zheng
Event 0x013c is not the same as fixed counter2, remove it from Silvermont's event constraints. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1398755081-12471-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07x86/reboot: Add reboot quirk for Certec BPC600Christian Gmeiner
Certec BPC600 needs reboot=pci to actually reboot. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Jones <davej@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1399446114-2147-1-git-send-email-christian.gmeiner@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-05asmlinkage, x86: Add explicit __visible to arch/x86/*Andi Kleen
As requested by Linus add explicit __visible to the asmlinkage users. This marks all functions visible to assembler. Tree sweep for arch/x86/* Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This udpate delivers: - A fix for dynamic interrupt allocation on x86 which is required to exclude the GSI interrupts from the dynamic allocatable range. This was detected with the newfangled tablet SoCs which have GPIOs and therefor allocate a range of interrupts. The MSI allocations already excluded the GSI range, so we never noticed before. - The last missing set_irq_affinity() repair, which was delayed due to testing issues - A few bug fixes for the armada SoC interrupt controller - A memory allocation fix for the TI crossbar interrupt controller - A trivial kernel-doc warning fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: irq-crossbar: Not allocating enough memory irqchip: armanda: Sanitize set_irq_affinity() genirq: x86: Ensure that dynamic irq allocation does not conflict linux/interrupt.h: fix new kernel-doc warnings irqchip: armada-370-xp: Fix releasing of MSIs irqchip: armada-370-xp: implement the ->check_device() msi_chip operation irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
2014-05-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two very small changes: one fix for the vSMP Foundation platform, and one to help LLVM not choke on options it doesn't understand (although it probably should)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vsmp: Fix irq routing x86: LLVMLinux: Wrap -mno-80387 with cc-option
2014-04-28genirq: x86: Ensure that dynamic irq allocation does not conflictThomas Gleixner
On x86 the allocation of irq descriptors may allocate interrupts which are in the range of the GSI interrupts. That's wrong as those interrupts are hardwired and we don't have the irq domain translation like PPC. So one of these interrupts can be hooked up later to one of the devices which are hard wired to it and the io_apic init code for that particular interrupt line happily reuses that descriptor with a completely different configuration so hell breaks lose. Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs, except for a few usage sites which have not yet blown up in our face for whatever reason. But for drivers which need an irq range, like the GPIO drivers, we have no limit in place and we don't want to expose such a detail to a driver. To cure this introduce a function which an architecture can implement to impose a lower bound on the dynamic interrupt allocations. Implement it for x86 and set the lower bound to nr_gsi_irqs, which is the end of the hardwired interrupt space, so all dynamic allocations happen above. That not only allows the GPIO driver to work sanely, it also protects the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and htirq code. They need to be cleaned up as well, but that's a separate issue. Reported-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Krogerus Heikki <heikki.krogerus@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-28x86/vsmp: Fix irq routingOren Twaig
Correct IRQ routing in case a vSMP box is detected but the Interrupt Routing Comply (IRC) value is set to "comply", which leads to incorrect IRQ routing. Before the patch: When a vSMP box was detected and IRC was set to "comply", users (and the kernel) couldn't effectively set the destination of the IRQs. This is because the hook inside vsmp_64.c always setup all CPUs as the IRQ destination using cpumask_setall() as the return value for IRQ allocation mask. Later, this "overrided" mask caused the kernel to set the IRQ destination to the lowest online CPU in the mask (CPU0 usually). After the patch: When the IRC is set to "comply", users (and the kernel) can control the destination of the IRQs as we will not be changing the default "apic->vector_allocation_domain". Signed-off-by: Oren Twaig <oren@scalemp.com> Acked-by: Shai Fultheim <shai@scalemp.com> Link: http://lkml.kernel.org/r/1398669697-2123-1-git-send-email-oren@scalemp.com [ Minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-24perf/x86: Fix RAPL rdmsrl_safe() usageStephane Eranian
This patch fixes a bug introduced by: 24223657806a ("perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU") The rdmsrl_safe() function returns 0 on success. The current code was failing to detect the RAPL PMU on real hardware (missing /sys/devices/power) because the return value of rdmsrl_safe() was misinterpreted. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Venkatesh Srinivas <venkateshs@google.com> Cc: peterz@infradead.org Cc: zheng.z.yan@intel.com Link: http://lkml.kernel.org/r/20140423170418.GA12767@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
2014-04-18perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMUVenkatesh Srinivas
CPUs which should support the RAPL counters according to Family/Model/Stepping may still issue #GP when attempting to access the RAPL MSRs. This may happen when Linux is running under KVM and we are passing-through host F/M/S data, for example. Use rdmsrl_safe to first access the RAPL_POWER_UNIT MSR; if this fails, do not attempt to use this PMU. Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1394739386-22260-1-git-send-email-venkateshs@google.com Cc: zheng.z.yan@intel.com Cc: eranian@google.com Cc: ak@linux.intel.com Cc: linux-kernel@vger.kernel.org [ The patch also silently fixes another bug: rapl_pmu_init() didn't handle the memory alloc failure case previously. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17kprobes/x86: Fix page-fault handling logicMasami Hiramatsu
Current kprobes in-kernel page fault handler doesn't expect that its single-stepping can be interrupted by an NMI handler which may cause a page fault(e.g. perf with callback tracing). In that case, the page-fault handled by kprobes and it misunderstands the page-fault has been caused by the single-stepping code and tries to recover IP address to probed address. But the truth is the page-fault has been caused by the NMI handler, and do_page_fault failes to handle real page fault because the IP address is modified and causes Kernel BUGs like below. ---- [ 2264.726905] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 2264.727190] IP: [<ffffffff813c46e0>] copy_user_generic_string+0x0/0x40 To handle this correctly, I fixed the kprobes fault handler to ensure the faulted ip address is its own single-step buffer instead of checking current kprobe state. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Sandeepa Prabhu <sandeepa.prabhu@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: fche@redhat.com Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20140417081644.26341.52351.stgit@ltc230.yrl.intra.hitachi.co.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17x86/mce: Fix CMCI preemption bugsIngo Molnar
The following commit: 27f6c573e0f7 ("x86, CMCI: Add proper detection of end of CMCI storms") Added two preemption bugs: - machine_check_poll() does a get_cpu_var() without a matching put_cpu_var(), which causes preemption imbalance and crashes upon bootup. - it does percpu ops without disabling preemption. Preemption is not disabled due to the mistaken use of a raw spinlock. To fix these bugs fix the imbalance and change cmci_discover_lock to a regular spinlock. Reported-by: Owen Kibel <qmewlo@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chen, Gong <gong.chen@linux.intel.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Todorov <atodorov@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/n/tip-jtjptvgigpfkpvtQxpEk1at2@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> -- arch/x86/kernel/cpu/mcheck/mce.c | 4 +--- arch/x86/kernel/cpu/mcheck/mce_intel.c | 18 +++++++++--------- 2 files changed, 10 insertions(+), 12 deletions(-)
2014-04-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - reboot regression fix - build message spam fix - GPU quirk fix - 'make kvmconfig' fix plus the wire-up of the renameat2() system call on i386" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the PCI reboot method from the default chain x86/build: Supress "Nothing to be done for ..." messages x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks x86/platform: Fix "make O=dir kvmconfig" i386: Wire up the renameat2() syscall
2014-04-16x86: Remove the PCI reboot method from the default chainIngo Molnar
Steve reported a reboot hang and bisected it back to this commit: a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list He heroically tested all reboot methods and found the following: reboot=t # triple fault ok reboot=k # keyboard ctrl FAIL reboot=b # BIOS ok reboot=a # ACPI FAIL reboot=e # EFI FAIL [system has no EFI] reboot=p # PCI 0xcf9 FAIL And I think it's pretty obvious that we should only try PCI 0xcf9 as a last resort - if at all. The other observation is that (on this box) we should never try the PCI reboot method, but close with either the 'triple fault' or the 'BIOS' (terminal!) reboot methods. Thirdly, CF9_COND is a total misnomer - it should be something like CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ... So this patch fixes the worst problems: - it orders the actual reboot logic to follow the reboot ordering pattern - it was in a pretty random order before for no good reason. - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and BOOT_CF9_SAFE flags to make the code more obvious. - it tries the BIOS reboot method before the PCI reboot method. (Since 'BIOS' is a terminal reboot method resulting in a hang if it does not work, this is essentially equivalent to removing the PCI reboot method from the default reboot chain.) - just for the miraculous possibility of terminal (resulting in hang) reboot methods of triple fault or BIOS returning without having done their job, there's an ordering between them as well. Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14Merge tag 'v3.15-rc1' into perf/urgentIngo Molnar
Pick up the latest fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirksVille Syrjälä
Have the KB(),MB(),GB() macros produce unsigned longs to avoid unintended sign extension issues with the gen2 memory size detection. What happens is first the uint8_t returned by read_pci_config_byte() gets promoted to an int which gets multiplied by another int from the MB() macro, and finally the result gets sign extended to size_t. Although this shouldn't be a problem in practice as all affected gen2 platforms are 32bit AFAIK, so size_t will be 32 bits. Reported-by: Bjorn Helgaas <bhelgaas@google.com> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1397382303-17525-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-11Merge tag 'pm+acpi-3.15-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management fixes and updates from Rafael Wysocki: "This is PM and ACPI material that has emerged over the last two weeks and one fix for a CPU hotplug regression introduced by the recent CPU hotplug notifiers registration series. Included are intel_idle and turbostat updates from Len Brown (these have been in linux-next for quite some time), a new cpufreq driver for powernv (that might spend some more time in linux-next, but BenH was asking me so nicely to push it for 3.15 that I couldn't resist), some cpufreq fixes and cleanups (including fixes for some silly breakage in a couple of cpufreq drivers introduced during the 3.14 cycle), assorted ACPI cleanups, wakeup framework documentation fixes, a new sysfs attribute for cpuidle and a new command line argument for power domains diagnostics. Specifics: - Fix for a recently introduced CPU hotplug regression in ARM KVM from Ming Lei. - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32 cpufreq drivers introduced during the 3.14 cycle (-stable material) from Chen Gang and Viresh Kumar. - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits from Gautham R Shenoy and Srivatsa S Bhat. - Exynos cpufreq driver fix preventing it from being included into multiplatform builds that aren't supported by it from Sachin Kamat. - cpufreq cleanups related to the usage of the driver_data field in struct cpufreq_frequency_table from Viresh Kumar. - cpufreq ppc driver cleanup from Sachin Kamat. - Intel BayTrail support for intel_idle and ACPI idle from Len Brown. - Intel CPU model 54 (Atom N2000 series) support for intel_idle from Jan Kiszka. - intel_idle fix for Intel Ivy Town residency targets from Len Brown. - turbostat updates (Intel Broadwell support and output cleanups) from Len Brown. - New cpuidle sysfs attribute for exporting C-states' target residency information to user space from Daniel Lezcano. - New kernel command line argument to prevent power domains enabled by the bootloader from being turned off even if they are not in use (for diagnostics purposes) from Tushar Behera. - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven. - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler Paul. - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi, Zhihui Zhang, Hanjun Guo" * tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) ACPI: Update the ACPI spec information in Kconfig arm, kvm: fix double lock on cpu_add_remove_lock cpuidle: sysfs: Export target residency information cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes PM / domains: Add pd_ignore_unused to keep power domains enabled ACPI / dock: Drop dock_device_ids[] table ACPI / video: Favor native backlight interface for ThinkPad Helix ACPI / thermal: Fix wrong variable usage in debug statement ...
2014-04-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pullx86 core platform updates from Peter Anvin: "This is the x86/platform branch with the objectionable IOSF patches removed. What is left is proper memory handling for Intel GPUs, and a change to the Calgary IOMMU code which will be required to make kexec work sanely on those platforms after some upcoming kexec changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, calgary: Use 8M TCE table size by default x86/gpu: Print the Intel graphics stolen memory range x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms x86/gpu: Add vfunc for Intel graphics stolen memory base address
2014-04-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This is a collection of minor fixes for x86, plus the IRET information leak fix (forbid the use of 16-bit segments in 64-bit mode)" NOTE! We may have to relax the "forbid the use of 16-bit segments in 64-bit mode" part, since there may be people who still run and depend on 16-bit Windows binaries under Wine. But I'm taking this in the current unconditional form for now to see who (if anybody) screams bloody murder. Maybe nobody cares. And maybe we'll have to update it with some kind of runtime enablement (like our vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already need to tweak). * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels efi: Pass correct file handle to efi_file_{read,close} x86/efi: Correct EFI boot stub use of code32_start x86/efi: Fix boot failure with EFI stub x86/platform/hyperv: Handle VMBUS driver being a module x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround x86, CMCI: Add proper detection of end of CMCI storms
2014-04-11x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernelsH. Peter Anvin
The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 32-bit mode. Since 16-bit support is somewhat crippled anyway on a 64-bit kernel (no V86 mode), and most (if not quite all) 64-bit processors support virtualization for the users who really need it, simply reject attempts at creating a 16-bit segment when running on top of a 64-bit kernel. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org Cc: <stable@vger.kernel.org>
2014-04-10x86, calgary: Use 8M TCE table size by defaultWANG Chao
New kexec-tools wants to pass kdump kernel needed memmap via E820 directly, instead of memmap=exactmap. This makes saved_max_pfn not be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using the same TCE table size, Muli suggest to hard code the size to max (8M). We can't get rid of saved_max_pfn this time, for backward compatibility with old first kernel and new second kernel. However new first kernel and old second kernel can not work unfortunately. v2->v1: - retain saved_max_pfn so new 2nd kernel can work with old 1st kernel from Vivek Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Jon Mason <jdmason@kudzu.us> Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-08Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: sysfs: Export target residency information intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-08Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpuidle Pull intel_idle and turbostat material for v3.15-rc1 from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-04Merge branches 'turbostat' and 'intel_idle' into releaseLen Brown
2014-04-03Merge tag 'trace-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ...
2014-04-02Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
2014-04-02Merge branch 'x86-nuke-platforms-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000
2014-04-02Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso changes from Peter Anvin: "This is the revamp of the 32-bit vdso and the associated cleanups. This adds timekeeping support to the 32-bit vdso that we already have in the 64-bit vdso. Although 32-bit x86 is legacy, it is likely to remain in the embedded space for a very long time to come. This removes the traditional COMPAT_VDSO support; the configuration variable is reused for simply removing the 32-bit vdso, which will produce correct results but obviously suffer a performance penalty. Only one beta version of glibc was affected, but that version was unfortunately included in one OpenSUSE release. This is not the end of the vdso cleanups. Stefani and Andy have agreed to continue work for the next kernel cycle; in fact Andy has already produced another set of cleanups that came too late for this cycle. An incidental, but arguably important, change is that this ensures that unused space in the VVAR page is properly zeroed. It wasn't before, and would contain whatever garbage was left in memory by BIOS or the bootloader. Since the VVAR page is accessible to user space this had the potential of information leaks" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86, vdso: Fix the symbol versions on the 32-bit vDSO x86, vdso, build: Don't rebuild 32-bit vdsos on every make x86, vdso: Actually discard the .discard sections x86, vdso: Fix size of get_unmapped_area() x86, vdso: Finish removing VDSO32_PRELINK x86, vdso: Move more vdso definitions into vdso.h x86: Load the 32-bit vdso in place, just like the 64-bit vdsos x86, vdso32: handle 32 bit vDSO larger one page x86, vdso32: Disable stack protector, adjust optimizations x86, vdso: Zero-pad the VVAR page x86, vdso: Add 32 bit VDSO time support for 64 bit kernel x86, vdso: Add 32 bit VDSO time support for 32 bit kernel x86, vdso: Patch alternatives in the 32-bit VDSO x86, vdso: Introduce VVAR marco for vdso32 x86, vdso: Cleanup __vdso_gettimeofday() x86, vdso: Replace VVAR(vsyscall_gtod_data) by gtod macro x86, vdso: __vdso_clock_gettime() cleanup x86, vdso: Revamp vclock_gettime.c mm: Add new func _install_special_mapping() to mmap.c x86, vdso: Make vsyscall_gtod_data handling x86 generic ...
2014-04-02x86: Fix dumpstack_64 irq stack handlingSteven Rostedt (Red Hat)
Commit 2223f6f6eeaa "x86: Clean up dumpstack_64.c code" changed the irq_stack processing a little from what it was before. The irq_stack_end variable needed to be cleared after its first use. By setting irq_stack to the per cpu irq_stack and passing that to analyze_stack(), and then clearing it after it is processed, we can get back the original behavior. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-02x86: Fix dumpstack_64 to keep state of "used" variable in loopSteven Rostedt (Red Hat)
Commit 2223f6f6eeaa "x86: Clean up dumpstack_64.c code" moved the used variable to a local within the loop, but the in_exception_stack() depended on being non-volatile with the ability to change it. By always re-initializing the "used" variable to zero, it would cause the in_exception_stack() to return the same thing each time, and cause the dump_stack loop to go into an infinite loop. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-02x86/platform/hyperv: Handle VMBUS driver being a moduleK. Y. Srinivasan
Hyper-V VMBUS driver can be a module; handle this case correctly. Please apply. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Link: http://lkml.kernel.org/r/1396421502-23222-1-git-send-email-kys@microsoft.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-02Merge branch 'linus' into x86/urgentIngo Molnar
Pick up Linus's latest, to fix a bug. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-02perf/x86: Enable DRAM RAPL support on Intel HaswellVince Weaver
It turns out all Haswell processors (including the Desktop variant) support RAPL DRAM readings in addition to package, pp0, and pp1. I've confirmed RAPL DRAM readings on my model 60 Haswell desktop. See the 4th-gen-core-family-desktop-vol-2-datasheet.pdf available from the Intel website for confirmation. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@gmail.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1404020045290.17889@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-01Merge tag 'driver-core-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and sysfs updates from Greg KH: "Here's the big driver core / sysfs update for 3.15-rc1. Lots of kernfs updates to make it useful for other subsystems, and a few other tiny driver core patches. All have been in linux-next for a while" * tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits) Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()" kernfs: cache atomic_write_len in kernfs_open_file numa: fix NULL pointer access and memory leak in unregister_one_node() Revert "driver core: synchronize device shutdown" kernfs: fix off by one error. kernfs: remove duplicate dir.c at the top dir x86: align x86 arch with generic CPU modalias handling cpu: add generic support for CPU feature based module autoloading sysfs: create bin_attributes under the requested group driver core: unexport static function create_syslog_header firmware: use power efficient workqueue for unloading and aborting fw load firmware: give a protection when map page failed firmware: google memconsole driver fixes firmware: fix google/gsmi duplicate efivars_sysfs_init() drivers/base: delete non-required instances of include <linux/init.h> kernfs: fix kernfs_node_from_dentry() ACPI / platform: drop redundant ACPI_HANDLE check kernfs: fix hash calculation in kernfs_rename_ns() kernfs: add CONFIG_KERNFS sysfs, kobject: add sysfs wrapper for kernfs_enable_ns() ...
2014-04-01Merge tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "A bunch of EDAC updates all over the place: - Support for new AMD models, along with more graceful fallback for unsupported hw. - Bunch of fixes from SUSE accumulated from bug reports - Misc other fixes and cleanups" * tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Add support for newer F16h models i7core_edac: Drop unused variable i82875p_edac: Drop redundant call to pci_get_device() amd8111_edac: Fix leaks in probe error paths e752x_edac: Drop pvt->bridge_ck MCE, AMD: Fix decoding module loading on unsupported hw i5100_edac: Remove an unneeded condition in i5100_init_csrows() sb_edac: Degrade log level for device registration amd64_edac: Fix logic to determine channel for F15 M30h processors edac/85xx: Remove deprecated IRQF_DISABLED i3200_edac: Add a missing pci_disable_device() on the exit path i5400_edac: Disable device when unloading module e752x_edac: Simplify call to pci_get_device()
2014-04-01Merge tag 'pm+acpi-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "The majority of this material spent some time in linux-next, some of it even several weeks. There are a few relatively fresh commits in it, but they are mostly fixes and simple cleanups. ACPI took the lead this time, both in terms of the number of commits and the number of modified lines of code, cpufreq follows and there are a few changes in the PM core and in cpuidle too. A new feature that already got some LWN.net's attention is the device PM QoS extension allowing latency tolerance requirements to be propagated from leaf devices to their ancestors with hardware interfaces for specifying latency tolerance. That should help systems with hardware-driven power management to avoid going too far with it in cases when there are latency tolerance constraints. There also are some significant changes in the ACPI core related to the way in which hotplug notifications are handled. They affect PCI hotplug (ACPIPHP) and the ACPI dock station code too. The bottom line is that all those notification now go through the root notify handler and are propagated to the interested subsystems by means of callbacks instead of having to install a notify handler for each device object that we can potentially get hotplug notifications for. In addition to that ACPICA will now advertise "Windows 2013" compatibility for _OSI, because some systems out there don't work correctly if that is not done (some of them don't even boot). On the system suspend side of things, all of the device suspend and resume callbacks, except for ->prepare() and ->complete(), are now going to be executed asynchronously as that turns out to speed up system suspend and resume on some platforms quite significantly and we have a few more optimizations in that area. Apart from that, there are some new device IDs and fixes and cleanups all over. In particular, the system suspend and resume handling by cpufreq should be improved and the cpuidle menu governor should be a bit more robust now. Specifics: - Device PM QoS support for latency tolerance constraints on systems with hardware interfaces allowing such constraints to be specified. That is necessary to prevent hardware-driven power management from becoming overly aggressive on some systems and to prevent power management features leading to excessive latencies from being used in some cases. - Consolidation of the handling of ACPI hotplug notifications for device objects. This causes all device hotplug notifications to go through the root notify handler (that was executed for all of them anyway before) that propagates them to individual subsystems, if necessary, by executing callbacks provided by those subsystems (those callbacks are associated with struct acpi_device objects during device enumeration). As a result, the code in question becomes both smaller in size and more straightforward and all of those changes should not affect users. - ACPICA update, including fixes related to the handling of _PRT in cases when it is broken and the addition of "Windows 2013" to the list of supported "features" for _OSI (which is necessary to support systems that work incorrectly or don't even boot without it). Changes from Bob Moore and Lv Zheng. - Consolidation of ACPI _OST handling from Jiang Liu. - ACPI battery and AC fixes allowing unusual system configurations to be handled by that code from Alexander Mezin. - New device IDs for the ACPI LPSS driver from Chiau Ee Chew. - ACPI fan and thermal optimizations related to system suspend and resume from Aaron Lu. - Cleanups related to ACPI video from Jean Delvare. - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu, Paul Bolle, Tomasz Nowicki. - Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan. - intel_pstate fixes and cleanups from Dirk Brandewie. - cpufreq fixes related to system suspend/resume handling from Viresh Kumar. - cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches. - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring. - cpuidle fixes related to the menu governor from Tuukka Tikkanen. - cpuidle fix related to coupled CPUs handling from Paul Burton. - Asynchronous execution of all device suspend and resume callbacks, except for ->prepare and ->complete, during system suspend and resume from Chuansheng Liu. - Delayed resuming of runtime-suspended devices during system suspend for the PCI bus type and ACPI PM domain. - New set of PM helper routines to allow device runtime PM callbacks to be used during system suspend and resume more easily from Ulf Hansson. - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven, Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella. - devfreq fix from Saravana Kannan" * tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs PM / sleep: Correct whitespace errors in <linux/pm.h> intel_pstate: Set core to min P state during core offline cpufreq: Add stop CPU callback to cpufreq_driver interface cpufreq: Remove unnecessary braces cpufreq: Fix checkpatch errors and warnings cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs MAINTAINERS: Reorder maintainer addresses for PM and ACPI PM / Runtime: Update runtime_idle() documentation for return value meaning video / output: Drop display output class support fujitsu-laptop: Drop unneeded include acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / video: fix ACPI_VIDEO dependencies cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE} cpufreq: Do not allow ->setpolicy drivers to provide ->target cpufreq: arm_big_little: set 'physical_cluster' for each CPU cpufreq: arm_big_little: make vexpress driver depend on bL core driver ACPI / button: Add ACPI Button event via netlink routine ACPI: Remove duplicate definitions of PREFIX ...
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-14 13:58:16 +0000