summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2017-02-09x86/irq: Make irq activate operations symmetricThomas Gleixner
commit aaaec6fc755447a1d056765b11b24d8ff2b81366 upstream. The recent commit which prevents double activation of interrupts unearthed interesting code in x86. The code (ab)uses irq_domain_activate_irq() to reconfigure an already activated interrupt. That trips over the prevention code now. Fix it by deactivating the interrupt before activating the new configuration. Fixes: 08d85f3ea99f1 "irqdomain: Avoid activating interrupts more than once" Reported-and-tested-by: Mike Galbraith <efault@gmx.de> Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311901580.3457@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26swiotlb: Convert swiotlb_force from int to enumGeert Uytterhoeven
commit ae7871be189cb41184f1e05742b4a99e2c59774d upstream. Convert the flag swiotlb_force from an int to an enum, to prepare for the advent of more possible values. Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26x86/ioapic: Restore IO-APIC irq_chip retrigger callbackRuslan Ruslichenko
commit 020eb3daaba2857b32c4cf4c82f503d6a00a67de upstream. commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' ↵Lukasz Odzioba
command-line option commit dd853fd216d1485ed3045ff772079cc8689a9a4a upstream. A negative number can be specified in the cmdline which will be used as setup_clear_cpu_cap() argument. With that we can clear/set some bit in memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel to misbehave. This patch adds lower bound check to setup_disablecpuid(). Boris Petkov reproduced a crash: [ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540 [ 1.236535] IP: memcpy_erms+0x6/0x10 Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andi.kleen@intel.com Cc: bp@alien8.de Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: slaoub@gmail.com Fixes: ac72e7888a61 ("x86: add generic clearcpuid=... option") Link: http://lkml.kernel.org/r/1482933340-11857-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19x86/CPU/AMD: Fix Bulldozer topologyBorislav Petkov
commit a33d331761bc5dd330499ca5ceceb67f0640a8e6 upstream. The following commit: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") ... broke the initial strategy for Bulldozer-based cores' topology, where we consider each thread of a compute unit a standalone core and not a HT or SMT thread. Revert to the firmware-supplied core_id numbering and do not make them thread siblings as we don't consider them for such even if they technically are, more or less. Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") Link: http://lkml.kernel.org/r/20170105092638.5247-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19x86/bugs: Separate AMD E400 erratum and C1E bugThomas Gleixner
commit 3344ed30791af66dbbad5f375008f3d1863b6c99 upstream. The workaround for the AMD Erratum E400 (Local APIC timer stops in C1E state) is a two step process: - Selection of the E400 aware idle routine - Detection whether the platform is affected The idle routine selection happens for possibly affected CPUs depending on family/model/stepping information. These range of CPUs is not necessarily affected as the decision whether to enable the C1E feature is made by the firmware. Unfortunately there is no way to query this at early boot. The current implementation polls a MSR in the E400 aware idle routine to detect whether the CPU is affected. This is inefficient on non affected CPUs because every idle entry has to do the MSR read. There is a better way to detect this before going idle for the first time which requires to seperate the bug flags: X86_BUG_AMD_E400 - Selects the E400 aware idle routine and enables the detection X86_BUG_AMD_APIC_C1E - Set when the platform is affected by E400 Replace the current X86_BUG_AMD_APIC_C1E usage by the new X86_BUG_AMD_E400 bug bit to select the idle routine which currently does an unconditional detection poll. X86_BUG_AMD_APIC_C1E is going to be used in later patches to remove the MSR polling and simplify the handling of this misfeature. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20161209182912.2726-3-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19x86/cpu/AMD: Clean up cpu_llc_id assignment per topology featureYazen Ghannam
commit b6a50cddbcbda7105355898ead18f1a647c22520 upstream. These changes do not affect current hw - just a cleanup: Currently, we assume that a system has a single Last Level Cache (LLC) per node, and that the cpu_llc_id is thus equal to the node_id. This no longer applies since Fam17h can have multiple last level caches within a node. So group the cpu_llc_id assignment by topology feature and family in order to make the computation of cpu_llc_id on the different families more clear. Here is how the LLC ID is being computed on the different families: The NODEID_MSR feature only applies to Fam10h in which case the LLC is at the node level. The TOPOEXT feature is used on families 15h, 16h and 17h. So far we only see multiple last level caches if L3 caches are available. Otherwise, the cpu_llc_id will default to be the phys_proc_id. We have L3 caches only on families 15h and 17h: - on Fam15h, the LLC is at the node level. - on Fam17h, the LLC is at the core complex level and can be found by right shifting the APIC ID. Also, keep the family checks explicit so that new families will fall back to the default, which will be node_id for TOPOEXT systems. Single node systems in families 10h and 15h will have a Node ID of 0 which will be the same as the phys_proc_id, so we don't need to check for multiple nodes before using the node_id. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> [ Rewrote the commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108153054.bs3sajbyevq6a6uu@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6Andy Lutomirski
commit 3df8d9208569ef0b2313e516566222d745f3b94b upstream. A typo (or mis-merge?) resulted in leaf 6 only being probed if cpuid_level >= 7. Fixes: 2ccd71f1b278 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability") Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/6ea30c0e9daec21e488b54761881a6dfcf3e04d0.1481825597.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09x86/smpboot: Make logical package management more robustThomas Gleixner
commit 9d85eb9119f4eeeb48e87adfcd71f752655700e9 upstream. The logical package management has several issues: - The APIC ids provided by ACPI are not required to be the same as the initial APIC id which can be retrieved by CPUID. The APIC ids provided by ACPI are those which are written by the BIOS into the APIC. The initial id is set by hardware and can not be changed. The hardware provided ids contain the real hardware package information. Especially AMD sets the effective APIC id different from the hardware id as they need to reserve space for the IOAPIC ids starting at id 0. As a consequence those machines trigger the currently active firmware bug printouts in dmesg, These are obviously wrong. - Virtual machines have their own interesting of enumerating APICs and packages which are not reliably covered by the current implementation. The sizing of the mapping array has been tweaked to be generously large to handle systems which provide a wrong core count when HT is disabled so the whole magic which checks for space in the physical hotplug case is not needed anymore. Simplify the whole machinery and do the mapping when the CPU starts and the CPUID derived physical package information is available. This solves the observed problems on AMD machines and works for the virtualization issues as well. Remove the extra call from XEN cpu bringup code as it is not longer required. Fixes: d49597fd3bc7 ("x86/cpu: Deal with broken firmware (VMWare/XEN)") Reported-and-tested-by: Borislav Petkov <bp@suse.de> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: M. Vefa Bicakci <m.v.b@runbox.com> Cc: xen-devel <xen-devel@lists.xen.org> Cc: Charles (Chas) Williams <ciwillia@brocade.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Alok Kataria <akataria@vmware.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1612121102260.3429@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-28x86/unwind: Fix guess-unwinder regressionJosh Poimboeuf
My attempt at fixing some KASAN false positive warnings was rather brain dead, and it broke the guess unwinder. With frame pointers disabled, /proc/<pid>/stack is broken: # cat /proc/1/stack [<ffffffffffffffff>] 0xffffffffffffffff Restore the code flow to more closely resemble its previous state, while still using READ_ONCE_NOCHECK() macros to silence KASAN false positives. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c2d75e03d630 ("x86/unwind: Prevent KASAN false positive warnings in guess unwinder") Link: http://lkml.kernel.org/r/b824f92c2c22eca5ec95ac56bd2a7c84cf0b9df9.1480309971.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-24x86/apic/uv: Silence a shift wrapping warningDan Carpenter
'm_io' is stored in 6 bits so it's a number in the 0-63 range. Static analysis tools complain that 1 << 63 will wrap so I have changed it to 1ULL << m_io. This code is over three years old so presumably the bug doesn't happen very frequently in real life or someone would have complained by now. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Travis <travis@sgi.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: b15cc4a12bed ("x86, uv, uv3: Update x2apic Support for SGI UV3") Link: http://lkml.kernel.org/r/20161123221908.GA23997@mwanda Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-21x86/fpu: Fix invalid FPU ptrace state after execve()Yu-cheng Yu
Robert O'Callahan reported that after an execve PTRACE_GETREGSET NT_X86_XSTATE continues to return the pre-exec register values until the exec'ed task modifies FPU state. The test code is at: https://bugzilla.redhat.com/attachment.cgi?id=1164286. What is happening is fpu__clear() does not properly clear fpstate. Fix it by doing just that. Reported-by: Robert O'Callahan <robert@ocallahan.org> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1479402695-6553-1-git-send-email-yu-cheng.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-18x86/dumpstack: Prevent KASAN false positive warningsJosh Poimboeuf
The oops stack dump code scans the entire stack, which can cause KASAN "stack-out-of-bounds" false positive warnings. Tell KASAN to ignore it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: davej@codemonkey.org.uk Cc: dvyukov@google.com Link: http://lkml.kernel.org/r/5f6e80c4b0c7f7f0b6211900847a247cdaad753c.1479398226.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-18x86/unwind: Prevent KASAN false positive warnings in guess unwinderJosh Poimboeuf
The guess unwinder scans the entire stack, which can cause KASAN "stack-out-of-bounds" false positive warnings. Tell KASAN to ignore it. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: davej@codemonkey.org.uk Cc: dvyukov@google.com Link: http://lkml.kernel.org/r/61939c0b2b2d63ce97ba59cba3b00fd47c2962cf.1479398226.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-17x86/boot: Avoid warning for zero-filling .bssArnd Bergmann
The latest binutils are warning about a .fill directive with an explicit value in a .bss section: arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned' arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned' This comes from the 'ENTRY()' macro padding the space between the symbols with 'nop' via: .align 4,0x90 Open-coding the .globl directive without the padding avoids that warning, as all the symbols are already page aligned. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16x86/sysfb: Fix lfb_size calculationDavid Herrmann
The screen_info.lfb_size field is shifted by 16 bits *only* in case of VBE. This has historical reasons since VBE advertised it similarly. However, in case of EFI framebuffers, the size is no longer shifted. Fix the x86 simple-framebuffer setup code to use the correct size in the non-VBE case. While at it, avoid variable abbreviations and rename 'len' to 'length', and use the correct types matching the screen_info definition. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Gundersen <teg@jklm.no> Link: http://lkml.kernel.org/r/20161115120158.15388-3-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16x86/sysfb: Add support for 64bit EFI lfb_baseDavid Herrmann
The screen_info object was extended to support 64-bit lfb_base addresses in: ae2ee627dc87 ("efifb: Add support for 64-bit frame buffer addresses") However, the x86 simple-framebuffer setup code never made use of it. Fix it to properly assemble and verify the lfb_base before advertising simple-framebuffer devices. In particular, this means if VIDEO_CAPABILITY_64BIT_BASE is set, the screen_info->ext_lfb_base field will contain the upper 32bit of the actual lfb_base. Make sure the address is not 0 (i.e., unset), as well as does not overflow the physical address type. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Gundersen <teg@jklm.no> Link: http://lkml.kernel.org/r/20161115120158.15388-2-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix an Intel/MID boot crash/hang bug - fix a cache topology mis-parsing bug on certain AMD CPUs - fix a virtualization firmware bug by adding a check+quirk workaround on the kernel side" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Deal with broken firmware (VMWare/XEN) x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems x86/platform/intel-mid: Retrofit pci_platform_pm_ops ->get_state hook
2016-11-11x86: apm: avoid uninitialized dataArnd Bergmann
apm_bios_call() can fail, and return a status in its argument structure. If that status however is zero during a call from apm_get_power_status(), we end up using data that may have never been set, as reported by "gcc -Wmaybe-uninitialized": arch/x86/kernel/apm_32.c: In function ‘apm’: arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here This changes the function to return "APM_NO_ERROR" here, which makes the code more robust to broken BIOS versions, and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-09x86/cpu: Deal with broken firmware (VMWare/XEN)Thomas Gleixner
Both ACPI and MP specifications require that the APIC id in the respective tables must be the same as the APIC id in CPUID. The kernel retrieves the physical package id from the APIC id during the ACPI/MP table scan and builds the physical to logical package map. The physical package id which is used after a CPU comes up is retrieved from CPUID. So we rely on ACPI/MP tables and CPUID agreeing in that respect. There exist VMware and XEN implementations which violate the spec. As a result the physical to logical package map, which relies on the ACPI/MP tables does not work on those systems, because the CPUID initialized physical package id does not match the firmware id. This causes system crashes and malfunction due to invalid package mappings. The only way to cure this is to sanitize the physical package id after the CPUID enumeration and yell when the APIC ids are different. Fix up the initial APIC id, which is fine as it is only used printout purposes. If the physical package IDs differ yell and use the package information from the ACPI/MP tables so the existing logical package map just works. Chas provided the resulting dmesg output for his affected 4 virtual sockets, 1 core per socket VM: [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 CPUID: 2 [Firmware Bug]: CPU1: Using firmware package id 1 instead of 2 .... Reported-and-tested-by: "Charles (Chas) Williams" <ciwillia@brocade.com>, Reported-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Alok Kataria <akataria@vmware.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: #4.6+ <stable@vger,kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611091613540.3501@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systemsYazen Ghannam
cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an underflow bug when extracting the socket_id value. It starts from 0 so subtracting 1 from it will result in an invalid value. This breaks scheduling topology later on since the cpu_llc_id will be incorrect. For example, the the cpu_llc_id of the *other* CPU in the loops in set_cpu_sibling_map() underflows and we're generating the funniest thread_siblings masks and then when I run 8 threads of nbench, they get spread around the LLC domains in a very strange pattern which doesn't give you the normal scheduling spread one would expect for performance. Other things like EDAC use cpu_llc_id so they will be b0rked too. So, the APIC ID is preset in APICx020 for bits 3 and above: they contain the core complex, node and socket IDs. The LLC is at the core complex level so we can find a unique cpu_llc_id by right shifting the APICID by 3 because then the least significant bit will be the Core Complex ID. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> [ Cleaned up and extended the commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # v4.4.. Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 3849e91f571d ("x86/AMD: Fix last level cache topology for AMD Fam17h systems") Link: http://lkml.kernel.org/r/20161108083506.rvqb5h4chrcptj7d@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-29x86/smpboot: Init apic mapping before usageThomas Gleixner
The recent changes, which forced the registration of the boot cpu on UP systems, which do not have ACPI tables, have been fixed for systems w/o local APIC, but left a wreckage for systems which have neither ACPI nor mptables, but the CPU has an APIC, e.g. virtualbox. The boot process crashes in prefill_possible_map() as it wants to register the boot cpu, which needs to access the local apic, but the local APIC is not yet mapped. There is no reason why init_apic_mapping() can't be invoked before prefill_possible_map(). So instead of playing another silly early mapping game, as the ACPI/mptables code does, we just move init_apic_mapping() before the call to prefill_possible_map(). In hindsight, I should have noticed that combination earlier. Sorry for the churn (also in stable)! Fixes: ff8560512b8d ("x86/boot/smp: Don't try to poke disabled/non-existent APIC") Reported-and-debugged-by: Michal Necasek <michal.necasek@oracle.com> Reported-and-tested-by: Wolfgang Bauer <wbauer@tmo.at> Cc: prarit@redhat.com Cc: ville.syrjala@linux.intel.com Cc: michael.thayer@oracle.com Cc: knut.osmundsen@oracle.com Cc: frank.mehnert@oracle.com Cc: Borislav Petkov <bp@alien8.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610282114380.5053@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-28Merge tag 'acpi-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix recent ACPICA regressions, an older PCI IRQ management regression, and an incorrect return value of a function in the APEI code. Specifics: - Fix three ACPICA issues related to the interpreter locking and introduced by recent changes in that area (Lv Zheng). - Fix a PCI IRQ management regression introduced during the 4.7 cycle and related to the configuration of shared IRQs on systems with an ISA bus (Sinan Kaya). - Fix up a return value of one function in the APEI code (Punit Agrawal)" * tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination ACPI / APEI: Fix incorrect return value of ghes_proc() ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages
2016-10-28x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=yBorislav Petkov
We needed the physical address of the container in order to compute the offset within the relocated ramdisk. And we did this by doing __pa() on the virtual address. However, __pa() does checks whether the physical address is within PAGE_OFFSET and __START_KERNEL_map - see __phys_addr() - which fail if we have CONFIG_RANDOMIZE_MEMORY enabled: we feed a virtual address which *doesn't* have the randomization offset into a function which uses PAGE_OFFSET which *does* have that offset. This makes this check fire: VIRTUAL_BUG_ON((x > y) || !phys_addr_valid(x)); ^^^^^^ due to the randomization offset. The fix is as simple as using __pa_nodebug() because we do that randomization offset accounting later in that function ourselves. Reported-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm <linux-mm@kvack.org> Cc: stable@vger.kernel.org # 4.9 Link: http://lkml.kernel.org/r/20161027123623.j2jri5bandimboff@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-26x86: Fix export for mcount and __fentry__Steven Rostedt
Commit 784d5699eddc5 ("x86: move exports to actual definitions") removed the EXPORT_SYMBOL(__fentry__) and EXPORT_SYMBOL(mcount) from x8664_ksyms_64.c, and added EXPORT_SYMBOL(function_hook) in mcount_64.S instead. The problem is that function_hook isn't a function at all, but a macro that is defined as either mcount or __fentry__ depending on the support from gcc. Originally, I thought this was a macro issue, like what __stringify() is used for. But the problem is a bit deeper. The Makefile.build has some magic that does post processing of files to create the CRC bindings. It does some searches for EXPORT_SYMBOL() and because it finds a macro name and not the actual functions, this causes function_hook not to be converted into mcount or __fentry__ and they are missed. Instead of adding more magic to Makefile.build, just add EXPORT_SYMBOL() for mcount and __fentry__ where the ifdef is used. Since this is assembly and not C, it doesn't require being set after the function is defined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Gabriel C <nix.or.die@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/r/20161024150148.4f9d90e4@gandalf.local.home Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-25x86/quirks: Hide maybe-uninitialized warningArnd Bergmann
gcc -Wmaybe-uninitialized detects that quirk_intel_brickland_xeon_ras_cap uses uninitialized data when CONFIG_PCI is not set: arch/x86/kernel/quirks.c: In function ‘quirk_intel_brickland_xeon_ras_cap’: arch/x86/kernel/quirks.c:641:13: error: ‘capid0’ is used uninitialized in this function [-Werror=uninitialized] However, the function is also not called in this configuration, so we can avoid the warning by moving the existing #ifdef to cover it as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/20161024153325.2752428-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25x86/unwind: Fix empty stack dereference in guess unwinderJosh Poimboeuf
Vince Waver reported the following bug: WARNING: CPU: 0 PID: 21338 at arch/x86/mm/fault.c:435 vmalloc_fault+0x58/0x1f0 CPU: 0 PID: 21338 Comm: perf_fuzzer Not tainted 4.8.0+ #37 Hardware name: Hewlett-Packard HP Compaq Pro 6305 SFF/1850, BIOS K06 v02.57 08/16/2013 Call Trace: <NMI> ? dump_stack+0x46/0x59 ? __warn+0xd5/0xee ? vmalloc_fault+0x58/0x1f0 ? __do_page_fault+0x6d/0x48e ? perf_log_throttle+0xa4/0xf4 ? trace_page_fault+0x22/0x30 ? __unwind_start+0x28/0x42 ? perf_callchain_kernel+0x75/0xac ? get_perf_callchain+0x13a/0x1f0 ? perf_callchain+0x6a/0x6c ? perf_prepare_sample+0x71/0x2eb ? perf_event_output_forward+0x1a/0x54 ? __default_send_IPI_shortcut+0x10/0x2d ? __perf_event_overflow+0xfb/0x167 ? x86_pmu_handle_irq+0x113/0x150 ? native_read_msr+0x6/0x34 ? perf_event_nmi_handler+0x22/0x39 ? perf_ibs_nmi_handler+0x4a/0x51 ? perf_event_nmi_handler+0x22/0x39 ? nmi_handle+0x4d/0xf0 ? perf_ibs_handle_irq+0x3d1/0x3d1 ? default_do_nmi+0x3c/0xd5 ? do_nmi+0x92/0x102 ? end_repeat_nmi+0x1a/0x1e ? entry_SYSCALL_64_after_swapgs+0x12/0x4a ? entry_SYSCALL_64_after_swapgs+0x12/0x4a ? entry_SYSCALL_64_after_swapgs+0x12/0x4a <EOE> ^A4---[ end trace 632723104d47d31a ]--- BUG: stack guard page was hit at ffffc90008500000 (stack is ffffc900084fc000..ffffc900084fffff) kernel stack overflow (page fault): 0000 [#1] SMP ... The NMI hit in the entry code right after setting up the stack pointer from 'cpu_current_top_of_stack', so the kernel stack was empty. The 'guess' version of __unwind_start() attempted to dereference the "top of stack" pointer, which is not actually *on* the stack. Add a check in the guess unwinder to deal with an empty stack. (The frame pointer unwinder already has such a check.) Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 7c7900f89770 ("x86/unwind: Add new unwind interface and implementations") Link: http://lkml.kernel.org/r/20161024133127.e5evgeebdbohnmpb@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-24ACPI/PCI: pci_link: penalize SCI correctlySinan Kaya
Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three fixes, a hw-enablement and a cross-arch fix/enablement change: - SGI/UV fix for older platforms - x32 signal handling fix - older x86 platform bootup APIC fix - AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS (Multiply Accumulation Single precision instructions) enablement. - move thread_info back into x86 specific code, to make life easier for other architectures trying to make use of CONFIG_THREAD_INFO_IN_TASK_STRUCT=y" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/smp: Don't try to poke disabled/non-existent APIC sched/core, x86: Make struct thread_info arch specific again x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi() x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features x86/vmware: Skip timer_irq_works() check on VMware
2016-10-22x86/boot/smp: Don't try to poke disabled/non-existent APICVille Syrjälä
Apparently trying to poke a disabled or non-existent APIC leads to a box that doesn't even boot. Let's not do that. No real clue if this is the right fix, but at least my P3 machine boots again. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: dyoung@redhat.com Cc: kexec@lists.infradead.org Cc: stable@vger.kernel.org Fixes: 2a51fe083eba ("arch/x86: Handle non enumerated CPU after physical hotplug") Link: http://lkml.kernel.org/r/1477102684-5092-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-20x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi()Dmitry Safonov
The recent introduction of SA_X32/IA32 sa_flags added a check for user_64bit_mode() into sigaction_compat_abi(). user_64bit_mode() is true for native 64-bit processes and x32 processes. Due to that the function returns w/o setting the SA_X32_ABI flag for X32 processes. In consequence the kernel attempts to deliver the signal to the X32 process in native 64-bit mode causing the process to segfault. Remove the check, so the actual check for X32 mode which sets the ABI flag can be reached. There is no side effect for native 64-bit mode. [ tglx: Rewrote changelog ] Fixes: 6846351052e6 ("x86/signal: Add SA_{X32,IA32}_ABI sa_flags") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: linux-mm@kvack.org Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Link: http://lkml.kernel.org/r/CAJwJo6Z8ZWPqNfT6t-i8GW1MKxQrKDUagQqnZ%2B0%2B697%3DMyVeGg@mail.gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-19Merge branch 'gup_flag-cleanups'Linus Torvalds
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e088546522 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
2016-10-19x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS featuresPiotr Luc
AVX512_4VNNIW - Vector instructions for deep learning enhanced word variable precision. AVX512_4FMAPS - Vector instructions for deep learning floating-point single precision. These new instructions are to be used in future Intel Xeon & Xeon Phi processors. The bits 2&3 of CPUID[level:0x07, EDX] inform that new instructions are supported by a processor. The spec can be found in the Intel Software Developer Manual (SDM) or in the Instruction Set Extensions Programming Reference (ISE). Define new feature flags to enumerate the new instructions in /proc/cpuinfo accordingly to CPUID bits and add the required xsave extensions which are required for proper operation. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20161018150111.29926-1-piotr.luc@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-19x86/vmware: Skip timer_irq_works() check on VMwareRenat Valiullin
The timer_irq_works() boot check may sometimes fail in a VM, when the Host is overcommitted or when the Guest is running nested. Since the intended check is unnecessary on VMware's virtual hardware, by-pass it. Signed-off-by: Renat Valiullin <rvaliullin@vmware.com> Acked-by: Alok N Kataria <akataria@vmware.com> Cc: virtualization@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20161013184539.GA11497@rvaliullin-vm Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-19mm: replace access_process_vm() write parameter with gup_flagsLorenzo Stoakes
This removes the 'write' argument from access_process_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes, plus hw-enablement changes: - fix persistent RAM handling - remove pkeys warning - remove duplicate macro - fix debug warning in irq handler - add new 'Knights Mill' CPU related constants and enable the perf bits" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add Knights Mill CPUID perf/x86/intel/rapl: Add Knights Mill CPUID perf/x86/intel: Add Knights Mill CPUID x86/cpu/intel: Add Knights Mill to Intel family x86/e820: Don't merge consecutive E820_PRAM ranges pkeys: Remove easily triggered WARN x86: Remove duplicate rtit status MSR macro x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()
2016-10-16Merge tag 'v4.9-rc1' into x86/urgent, to pick up updatesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16x86/e820: Don't merge consecutive E820_PRAM rangesDan Williams
Commit: 917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") ... fixed up the broken manipulations of max_pfn in the presence of E820_PRAM ranges. However, it also broke the sanitize_e820_map() support for not merging E820_PRAM ranges. Re-introduce the enabling to keep resource boundaries between consecutive defined ranges. Otherwise, for example, an environment that boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0 device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhang Yi <yizhan@redhat.com> Cc: linux-nvdimm@lists.01.org Fixes: 917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16kprobes: Unpoison stack in jprobe_return() for KASANDmitry Vyukov
I observed false KSAN positives in the sctp code, when sctp uses jprobe_return() in jsctp_sf_eat_sack(). The stray 0xf4 in shadow memory are stack redzones: [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480 [ ] Read of size 1 by task syz-executor/18535 [ ] page:ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x1fffc0000000000() [ ] page dumped because: kasan: bad access detected [ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28 [ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ ] ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8 [ ] ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000 [ ] ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370 [ ] Call Trace: [ ] [<ffffffff82d2b849>] dump_stack+0x12e/0x185 [ ] [<ffffffff817d3169>] kasan_report+0x489/0x4b0 [ ] [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20 [ ] [<ffffffff82d49529>] memcmp+0xe9/0x150 [ ] [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0 [ ] [<ffffffff817d2031>] save_stack+0xb1/0xd0 [ ] [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0 [ ] [<ffffffff817d05b8>] kfree+0xc8/0x2a0 [ ] [<ffffffff85b03f19>] skb_free_head+0x79/0xb0 [ ] [<ffffffff85b0900a>] skb_release_data+0x37a/0x420 [ ] [<ffffffff85b090ff>] skb_release_all+0x4f/0x60 [ ] [<ffffffff85b11348>] consume_skb+0x138/0x370 [ ] [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180 [ ] [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70 [ ] [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0 [ ] [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0 [ ] [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190 [ ] [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20 [ ... ] [ ] Memory state around the buggy address: [ ] ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ^ [ ] ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ================================================================== KASAN stack instrumentation poisons stack redzones on function entry and unpoisons them on function exit. If a function exits abnormally (e.g. with a longjmp like jprobe_return()), stack redzones are left poisoned. Later this leads to random KASAN false reports. Unpoison stack redzones in the frames we are going to jump over before doing actual longjmp in jprobe_return(). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: kasan-dev@googlegroups.com Cc: surovegin@google.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16kprobes: Avoid false KASAN reports during stack copyDmitry Vyukov
Kprobes save and restore raw stack chunks with memcpy(). With KASAN these chunks can contain poisoned stack redzones, as the result memcpy() interceptor produces false stack out-of-bounds reports. Use __memcpy() instead of memcpy() for stack copying. __memcpy() is not instrumented by KASAN and does not lead to the false reports. Currently there is a spew of KASAN reports during boot if CONFIG_KPROBES_SANITY_TEST is enabled: [ ] Kprobe smoke test: started [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0x17c/0x280 at addr ffff88085259fba8 [ ] Read of size 64 by task swapper/0/1 [ ] page:ffffea00214967c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x2fffff80000000() [ ] page dumped because: kasan: bad access detected [...] Reported-by: CAI Qian <caiqian@redhat.com> Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kasan-dev@googlegroups.com [ Improved various details. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression, because genksyms no longer generates checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this. Plus, we are talking about functions like strcpy(), which rarely change prototypes. - Fixes for PPC fallout of the above by Stephen Rothwell and Nick Piggin - fixdep speedup by Alexey Dobriyan. - preparatory work by Nick Piggin to allow architectures to build with -ffunction-sections, -fdata-sections and --gc-sections - CONFIG_THIN_ARCHIVES support by Stephen Rothwell - fix for filenames with colons in the initramfs source by me. * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits) initramfs: Escape colons in depfile ppc: there is no clear_pages to export powerpc/64: whitelist unresolved modversions CRCs kbuild: -ffunction-sections fix for archs with conflicting sections kbuild: add arch specific post-link Makefile kbuild: allow archs to select link dead code/data elimination kbuild: allow architectures to use thin archives instead of ld -r kbuild: Regenerate genksyms lexer kbuild: genksyms fix for typeof handling fixdep: faster CONFIG_ search ia64: move exports to definitions sparc32: debride memcpy.S a bit [sparc] unify 32bit and 64bit string.h sparc: move exports to definitions ppc: move exports to definitions arm: move exports to definitions s390: move exports to definitions m68k: move exports to definitions alpha: move exports to actual definitions x86: move exports to actual definitions ...
2016-10-14x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()Wanpeng Li
=============================== [ INFO: suspicious RCU usage. ] 4.8.0+ #24 Not tainted ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. [<ffffffff9d492b95>] do_trace_write_msr+0x135/0x140 [<ffffffff9d06f860>] native_write_msr+0x20/0x30 [<ffffffff9d065fad>] native_apic_msr_eoi_write+0x1d/0x30 [<ffffffff9d05bd1d>] smp_reschedule_interrupt+0x1d/0x30 [<ffffffff9d8daec6>] reschedule_interrupt+0x96/0xa0 Reschedule interrupt may be called in cpu idle state. This causes lockdep check warning above. Add irq_enter/exit() in smp_reschedule_interrupt(), irq_enter() tells the RCU subsystems to end the extended quiescent state, so the following trace call in ack_APIC_irq() works correctly. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1476409733-5133-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-11Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
2016-10-11kdump, vmcoreinfo: report memory sections virtual addressesThomas Garnier
KASLR memory randomization can randomize the base of the physical memory mapping (PAGE_OFFSET), vmalloc (VMALLOC_START) and vmemmap (VMEMMAP_START). Adding these variables on VMCOREINFO so tools can easily identify the base of each memory section. Link: http://lkml.kernel.org/r/1471531632-23003-1-git-send-email-thgarnie@google.com Signed-off-by: Thomas Garnier <thgarnie@google.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11x86/panic: replace smp_send_stop() with kdump friendly version in panic pathHidehiro Kawai
Daniel Walker reported problems which happens when crash_kexec_post_notifiers kernel option is enabled (https://lkml.org/lkml/2015/6/24/44). In that case, smp_send_stop() is called before entering kdump routines which assume other CPUs are still online. As the result, for x86, kdump routines fail to save other CPUs' registers and disable virtualization extensions. To fix this problem, call a new kdump friendly function, crash_smp_send_stop(), instead of the smp_send_stop() when crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak function, and it just call smp_send_stop(). Architecture codes should override it so that kdump can work appropriately. This patch only provides x86-specific version. For Xen's PV kernel, just keep the current behavior. NOTES: - Right solution would be to place crash_smp_send_stop() before __crash_kexec() invocation in all cases and remove smp_send_stop(), but we can't do that until all architectures implement own crash_smp_send_stop() - crash_smp_send_stop()-like work is still needed by machine_crash_shutdown() because crash_kexec() can be called without entering panic() Fixes: f06e5153f4ae (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jp Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reported-by: Daniel Walker <dwalker@fifo99.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Xunlei Pang <xpang@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11x86: use simpler API for random address requestsJason Cooper
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-3-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-10Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull protection keys syscall interface from Thomas Gleixner: "This is the final step of Protection Keys support which adds the syscalls so user space can actually allocate keys and protect memory areas with them. Details and usage examples can be found in the documentation. The mm side of this has been acked by Mel" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Update documentation x86/mm/pkeys: Do not skip PKRU register if debug registers are not used x86/pkeys: Fix pkeys build breakage for some non-x86 arches x86/pkeys: Add self-tests x86/pkeys: Allow configuration of init_pkru x86/pkeys: Default to a restrictive init PKRU pkeys: Add details of system call use to Documentation/ generic syscalls: Wire up memory protection keys syscalls x86: Wire up protection keys system calls x86/pkeys: Allocation/free syscalls x86/pkeys: Make mprotect_key() mask off additional vm_flags mm: Implement new pkey_mprotect() system call x86/pkeys: Add fault handling for PF_PK page fault bit
2016-10-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates from Thomas Gleixner: "A pile of regression fixes and updates: - address the fallout of the patches which made the cpuid - nodeid relation permanent: Handling of invalid APIC ids and preventing pointless warning messages. - force eager FPU when protection keys are enabled. Protection keys are not generating FPU exceptions so they cannot work with the lazy FPU mechanism. - prevent force migration of interrupts which are not part of the CPU vector domain. - handle the fact that APIC ids are not updated in the ACPI/MADT tables on physical CPU hotplug - remove bash-isms from syscall table generator script - use the hypervisor supplied APIC frequency when running on VMware" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Make protection keys an "eager" feature x86/apic: Prevent pointless warning messages x86/acpi: Prevent LAPIC id 0xff from being accounted arch/x86: Handle non enumerated CPU after physical hotplug x86/unwind: Fix oprofile module link error x86/vmware: Skip lapic calibration on VMware x86/syscalls: Remove bash-isms in syscall table generator x86/irq: Prevent force migration of irqs which are not in the vector domain
2016-10-08x86/apic: Prevent pointless warning messagesThomas Gleixner
Markus reported that he sees new warnings: APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 4/0x84 ignored. APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 5/0x85 ignored. This comes from the recent persistant cpuid - nodeid changes. The code which emits the warning has been called prior to these changes only for enabled processors. Now it's called for disabled processors as well to get the possible cpu accounting correct. So if the kernel is compiled for the number of actual available/enabled CPUs and the BIOS reports disabled CPUs as well then the above warnings are printed. That's a pointless exercise as it only makes sense if there are more CPUs enabled than the kernel supports. Nake the warning conditional on enabled processors so we are back to the state before these changes. Fixes: 8f54969dc8d6 ("x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping") Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: linux-acpi@vger.kernel.org Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610071549330.19804@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-08x86/acpi: Prevent LAPIC id 0xff from being accountedThomas Gleixner
Yinghai reported that the recent changes to make the cpuid - nodeid relationship permanent causes a cpuid ordering regression on a system which has 2apic enabled.. The reason is that the ACPI local APIC parser has no sanity check for apicid 0xff, which is an invalid id. So a CPU id for this invalid local APIC id is allocated and therefor breaks the cpuid ordering. Add a sanity check to acpi_parse_lapic() which ignores the invalid id. Fixes: 8f54969dc8d6 ("x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping") Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>, Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: douly.fnst@cn.fujitsu.com, Cc: zhugh.fnst@cn.fujitsu.com Cc: Tony Luck <tony.luck@intel.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Lv Zheng <lv.zheng@intel.com>, Cc: robert.moore@intel.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/CAE9FiQVQx6FRXT-RdR7Crz4dg5LeUWHcUSy1KacjR+JgU_vGJg@mail.gmail.com
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-31 07:47:12 +0000