summaryrefslogtreecommitdiff
path: root/arch/xtensa/include/asm
AgeCommit message (Collapse)Author
2014-10-05xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_missMax Filippov
commit 7128039fe2dd3d59da9e4ffa036f3aaa3ba87b9f upstream. Current definition of TLBTEMP_BASE_2 is always 32K above the TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER) to determine TLBTEMP region where the fault happened. The size of the TLBTEMP region is also checked incorrectly: not 64K, but twice data cache way size (whicht may as well be less than the instruction cache way size). Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size. Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or the instruction cache way size, and use it to determine if the second level TLB miss occured in the TLBTEMP region. Practical occurence of page faults in the TLBTEMP area is extremely rare, this code can be tested by deletion of all w[di]tlb instructions in the tlbtemp_mapping region. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DSMax Filippov
commit 52247123749cc3cbc30168b33ad8c69515c96d23 upstream. With SMP and a lot of debug options enabled task_struct::thread gets out of reach of s32i/l32i instructions with base pointing at task_struct, breaking build with the following messages: arch/xtensa/kernel/entry.S: Assembler messages: arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048' arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040' arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044' Change base to point to task_struct::thread in such cases. Don't use a10 in _switch_to to save/restore prev pointer as a2 is not clobbered. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-24Merge tag 'xtensa-for-next-20140221-1' into for_nextChris Zankel
Xtensa fixes for 3.14: - allow booting xtfpga on boards with new uBoot and >128MBytes memory; - drop nonexistent GPIO32 support from fsf variant; - don't select USE_GENERIC_SMP_HELPERS; - enable common clock framework support, set up ethoc clock on xtfpga; - wire up sched_setattr and sched_getattr syscalls. Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-25xtensa: introduce spill_registers_kernel macroMax Filippov
Most in-kernel users want registers spilled on the kernel stack and don't require PS.EXCM to be set. That means that they don't need fixup routine and could reuse regular window overflow mechanism for that, which makes spill routine very simple. Cc: stable@vger.kernel.org Suggested-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-25Merge tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa patches from Chris Zankel: "The major changes are adding support for SMP for Xtensa, fixing and cleaning up the ISS (simulator) network driver, and better support for device trees" * tag 'xtensa-next-20140123' of git://github.com/czankel/xtensa-linux: (40 commits) xtensa: implement ndelay xtensa: clean up udelay xtensa: enable HAVE_PERF_EVENTS xtensa: remap io area defined in device tree xtensa: support default device tree buses xtensa: initialize device tree clock sources xtensa: xtfpga: fix definitions of platform devices xtensa: standardize devicetree cpu compatible strings xtensa: avoid duplicate of IO range definitions xtensa: fix ATOMCTL register documentation xtensa: Enable irqs after cpu is set online xtensa: ISS: raise network polling rate to 10 times/sec xtensa: remove unused XTENSA_ISS_NETWORK Kconfig parameter xtensa: ISS: avoid simple_strtoul usage xtensa: Switch to sched_clock_register() xtensa: implement CPU hotplug xtensa: add SMP support xtensa: add MX irqchip xtensa: clear timer IRQ unconditionally in its handler xtensa: clean up do_interrupt/do_IRQ ...
2014-01-19xtensa: fix warning '"CONFIG_OF" is not defined'Max Filippov
The warning only shows up when building MMUv3 configuration with OF support disabled. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: implement ndelayMax Filippov
Proper ndelay implementation allows for faster IO rate with drivers that use ndelay to access their device registers, as otherwise ndelay is emulated with udelay. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: clean up udelayMax Filippov
Replace division with shift, use ccount_freq instead of loops_per_jiffy. Introduce __MAX_UDELAY and (undefined) __bad_udelay, break build for too big udelay constants. Remove irrelevant comment, clean up code style. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: enable HAVE_PERF_EVENTSBaruch Siach
This allows the perf tool to monitor kernel tracepoint events. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: remap io area defined in device treeBaruch Siach
Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: avoid duplicate of IO range definitionsBaruch Siach
Define IO addresses in a single place, to make it easier to change for non-standard memory maps. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14xtensa: implement CPU hotplugMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add SMP supportMax Filippov
This is largely based on SMP code from the xtensa-2.6.29-smp tree by Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly other Tensilica folks). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add MX irqchipMax Filippov
MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move built-in PIC to drivers/irqchipMax Filippov
Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move init_mmu declaration to mmu_context.hMax Filippov
Secondary CPUs need this declaration to initialize their MMUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: fix __delay for small loop countMax Filippov
Avoid __delay counter underflow for loop counts < 2. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: fix arch spinlock function namesMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: implement robust futex atomic uaccess opsBaruch Siach
This enables the set_robust_list(2) system call. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: remove trailing colons in asm statementMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clean up include/asm/vectors.hMax Filippov
- drop unused PHYSICAL_MEMORY_ADDRESS and XC_PADDR - fix NMI_VECTOR_VADDR and INTLEVEL7_VECTOR_VADDR definitions: there should be no XCHAL_ prefix in them; - fix the following warning seen with gcc-4.8.1: arch/xtensa/include/asm/vectors.h:71:5: warning: "XCHAL_HAVE_VECBASE" is not defined [-Wundef] Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-12arch: Clean up asm/barrier.h implementations using asm-generic/barrier.hPeter Zijlstra
We're going to be adding a few new barrier primitives, and in order to avoid endless duplication make more agressive use of asm-generic/barrier.h. Change the asm-generic/barrier.h such that it allows partial barrier definitions and fills out the rest with defaults. There are a few architectures (m32r, m68k) that could probably do away with their barrier.h file entirely but are kept for now due to their unconventional nop() implementation. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Michael Neuling <mikey@neuling.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Victor Kaplansky <VICTORK@il.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20131213150640.846368594@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17lib: Add missing arch generic-y entries for asm-generic/hash.hDavid S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts
2013-11-15xtensa: use buddy allocator for PTE tableKirill A. Shutemov
At the moment xtensa uses slab allocator for PTE table. It doesn't work with enabled split page table lock: slab uses page->slab_cache and page->first_page for its pages. These fields share stroage with page->ptl. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15xtensa: handle pgtable_page_ctor() failKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15xtensa: fix potential NULL-pointer dereferenceKirill A. Shutemov
Add missing check for memory allocation fail. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13preempt: Make PREEMPT_ACTIVE genericThomas Gleixner
No point in having this bit defined by architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-10-09of: remove empty arch prom.h headersRob Herring
Now that prom.h is optional, all the empty prom.h headers can be removed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com>
2013-10-09of: remove HAVE_ARCH_DEVTREE_FIXUPSRob Herring
HAVE_ARCH_DEVTREE_FIXUPS appears to always be needed except for sparc, but it is only used for /proc/device-teee and sparc does not enable /proc/device-tree. So this option is redundant. Remove the option and always enable it. This has the side effect of fixing /proc/device-tree on arches such as arm64 which failed to define this option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com>
2013-09-25sched, arch: Create asm/preempt.hPeter Zijlstra
In order to prepare to per-arch implementations of preempt_count move the required bits into an asm-generic header and use this for all archs. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-h5j0c1r3e3fk015m30h8f1zx@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-06xtensa: remove CCOUNT_PER_JIFFYBaruch Siach
Use ccount_freq directly to make the code a little more readable. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-09-06xtensa: fix !CONFIG_XTENSA_CALIBRATE_CCOUNT build failureBaruch Siach
Commits 925f5532 (xtensa: ccount based clockevent implementation) and e3f43291 (xtensa: ccount based sched_clock) introduced users of ccount_freq. This variable doesn't exist when CONFIG_XTENSA_CALIBRATE_CCOUNT is disabled. Add ccount_freq definition in this case. Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-09-06xtensa: keep a3 and excsave1 on entry to exception handlersMax Filippov
Based on the SMP patch by Joe Taylor and subsequent fixes. Preserve exception table pointer (normally stored in excsave1 SR) as it cannot be easily restored in SMP environment. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-11Merge tag 'xtensa-next-20130710' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa updates from Chris Zankel. * tag 'xtensa-next-20130710' of git://github.com/czankel/xtensa-linux: (22 commits) xtensa: remove the second argument of __bio_kmap_atomic() xtensa: add static function tracer support xtensa: Flat DeviceTree copy not future-safe xtensa: check TLB sanity on return to userspace xtensa: adjust boot parameters address when INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is selected xtensa: bootparams: fix typo xtensa: tell git to ignore generated .dtb files xtensa: ccount based sched_clock xtensa: ccount based clockevent implementation xtensa: consolidate ccount access routines xtensa: cleanup ccount frequency tracking xtensa: timex.h: remove unused symbols xtensa: tell git to ignore copied zlib source files xtensa: fix section mismatch in pcibios_fixup_bus xtensa: ISS: fix section mismatch in iss_net_setup arch: xtensa: include: asm: compiling issue, need cmpxchg64() defined. xtensa: xtfpga: fix section mismatch xtensa: remove unused platform_init_irq() xtensa: tell git to ignore generated files xtensa: flush TLB entries for pages of non-current mm correctly ...
2013-07-08xtensa: add static function tracer supportMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: bootparams: fix typoBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: consolidate ccount access routinesBaruch Siach
Use get_ccount everywhere; remove xtensa_get_ccount. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: cleanup ccount frequency trackingBaruch Siach
Remove unused nsec_per_ccount, and rename ccount_per_jiffy to ccount_preq. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: timex.h: remove unused symbolsBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-06-29consolidate io_remap_pfn_range definitionsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-05arch: xtensa: include: asm: compiling issue, need cmpxchg64() defined.Chen Gang
When compiling with 'allmodconfig', some of drivers need cmpxchg64(), xtensa does not supply 64-bit implementation for 'xchg', so use the 'generic' implementation. e.g. (for next-20130527 tree): drivers/block/blockconsole.c:164:2: error: implicit declaration of function ‘cmpxchg64’ [-Werror=implicit-function-declaration] Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-06-05xtensa: remove unused platform_init_irq()Baruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-20xtensa: fix TLB multihit exceptionsChris Zankel
- set _PAGE_USER in the pte_clear to avoid having TLB multihit exceptions (see following threads for more details); http://lists.linux-xtensa.org/pipermail/linux-xtensa/Week-of-Mon-20130401/ http://lists.linux-xtensa.org/pipermail/linux-xtensa/Week-of-Mon-20130408/ - improved documentation of the PTE layout - fix PTE mapping for present and 'prot_none' pages for T1050 hw and earlier - fix pte_file offset and size - add check for the correct number of bits for swap type CC: piet.delaney@gmail.com CC: jcmvbkbc@gmail.com Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull xtensa updates from Chris Zankel: "Support for the latest MMU architecture that allows for a larger accessible memory region, and various bug-fixes" * tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux: xtensa: Switch to asm-generic/linkage.h xtensa: fix redboot load address xtensa: ISS: fix timer_lock usage in rs_open xtensa: disable IRQs while IRQ handler is running xtensa: enable lockdep support xtensa: fix arch_irqs_disabled_flags implementation xtensa: add irq flags trace support xtensa: provide custom CALLER_ADDR* implementations xtensa: add stacktrace support xtensa: clean up stpill_registers xtensa: don't use a7 in simcalls xtensa: don't attempt to use unconfigured timers xtensa: provide default platform_pcibios_init implementation xtensa: remove KCORE_ELF again xtensa: document MMUv3 setup sequence xtensa: add MMU v3 support xtensa: fix ibreakenable register update xtensa: fix oprofile building as module
2013-05-09xtensa: Switch to asm-generic/linkage.hGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-09xtensa: fix arch_irqs_disabled_flags implementationMax Filippov
IRQs are disabled when PS.EXCM is set or PS.INTLEVEL is equal to or higher than LOCKLEVEL. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: provide custom CALLER_ADDR* implementationsMax Filippov
Definition of CALLER_ADDR* through __builtin_return_address makes compiler insert calls to __xtensa_libgcc_window_spill, which in turn makes fast_syscall_spill_registers syscall that clobbers registers when called from the kernel mode, leading to invalid opcode exceptions on return to userspace. Provide definition for CALLER_ADDR0 as MAKE_PC_FROM_RA(a0, a1) and in case CONFIG_FRAME_POINTER is enabled extract CALLER_ADDR{1-3} from stack. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-05-26 12:49:26 +0000