summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-08-25ENGR00074472 Fix SD module makes system crash when system enters suspend mode2.6.24-mx31pdk-200808251921Fred Fan
use right parameter when calling mxc_free_iomux Signed-off-by: Fred Fan <r01011@freescale.com> (cherry picked from commit f5e011cda199c05f25e217c33974dfae9940c8d8)
2008-08-25ENGR00074262 Fix gpio line interrupt can not work for wakeup interruptFred Fan
register gpio sysdev after avic sysdev Signed-off-by: Fred Fan <r01011@freescale.com> (cherry picked from commit 3ff35c4ccb2b6d642d42176b429fddd7bd0bef68)
2008-08-25ENGR00074255 CR fix compile errorkevin shen
fix compile error for mx27/mx31/mxc91321 Signed-off-by: Kevin Shen <b00984@freescale.com> (cherry picked from commit eb0fde96097717b412502c06deff42800ab6e570)
2008-08-25ENGR00074126 CR fix on-off key wake up system problemkevin shen
add interrupt handle for on-off key Signed-off-by: Kevin Shen <b00984@freescale.com> (cherry picked from commit 021b66f90e97984a360c0d02f43463963fb69eda)
2008-08-25ENGR00073348 CR fix mxc30030evb compile errorkevin shen
Add empty function for on-off key configure Signed-off-by: Kevin Shen <b00984@freescale.com>
2008-08-25ENGR00073340 CR fix mx27 compile errorkevin shen
add a empty function for on-off key configure for mx27 and mx31 Signed-off-by: Kevin Shen <b00984@freescale.com>
2008-08-25ENGR00060279 CR can't wake up from suspend state by on/off keykevin shen
fix this CR by configure on/off gpio pin Signed-off-by: Kevin Shen <b00984@freescale.com>
2008-08-25ENGR00070635 Add IRAM for Audio Playback Buffer on i.MX37Laura Lawrence
Map IRAM playback buffer to user space for power saving Map SDMA buffer descriptors to IRAM Signed-off-by: Laura Lawrence <Laura.Lawrence@freescale.com>
2008-08-25ENGR00072542: Add support for MPR084 Touch Keypad driver.Raj Rajasekaran
Added keypad driver for MX37 3 stack board. Signed-off-by: Raj Rajasekaran <b10872@freescale.com>
2008-08-25ENGR00072757 Enable Access to IRAM on i.MX37Laura Lawrence
Enable access to IRAM through the SCC2 module Signed-off-by: Laura Lawrence <Laura.Lawrence@freescale.com>
2008-08-25ENGR00047817 eSDHC driverRichard Zhu
SDHC PIO, and the DMAs are still in dbging Signed-off-by: Richard Zhu <r65037@freescale.com>
2008-08-25ENGR00058719 i.MX35 3stack supports touchscreen tsc2007Fred Fan
Add close interface to input device. And change the wait_for_complete to wait_for_complete_interruptible_timeout, because driver can not get the event about singals. So thread can not terminate. Signed-off-by: Fred Fan <r01011@freescale.com>
2008-08-25ENGR00071731 Fix MX37 DDR Clock Get FunctionMahesh Mahadevan
The fixes the DDR clock value returned by the clocking API Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
2008-08-25ENGR00071507 Use the latest SDMA mcu_2_app script for MX31Mahesh Mahadevan
Update the devices file to point to the latest mcu_2_app SDMA script Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
2008-08-25ENGR00071509 Fix i.mx31 3stack board can not enter suspend mode by SPISam Yang
Fix error gpio inactive interface of SPI. and Enable wakeup interrupt for RM mode. And add code to skip suspend check for un-attached spi client device Signed-off-by: Sam Yang <r52096@freescale.com>
2008-08-25ENGR00071499 MX31_3stack: Make GPO3 and GPO4 parent GPO1Nancy Chen
Set regulator GPO1 to be the parent of regulator GPO3 and GPO4 for MX31_3stack Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>
2008-08-25ENGR00070699 mma7450 device driverkevin shen
support device mma7450 Signed-off-by: Kevin Shen <b00984@freescale.com>
2008-08-25ENGR00058723 MX35 IPU and LCDXinyu Chen
Change IPU internal RAM param base address. Enable CLAA WVGA LCD Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
2008-08-25ENGR00058904 Add pmic source codeJingyu Zhou
Add pmic source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
2008-08-25ENGR00058775 SPI update for i.MX35Katherine Lu
SPI driver update for i.MX35 Signed-off-by: Katherine Lu <r63906@freescale.com>
2008-08-25ENGR00070460 Fix FM config HW event macro and deplicated I2C registerSam Yang
1. Add FM item in MX31 3DS and MX37 3DS default config. 2. Fix wrong HW event Macro in pmic_battery.c MXC_HWEVENT To CONFIG_MXC_HWEVENT 3. Delete duplicated I2C register code in mx3_3stack.c Signed-off-by: Sam Yang <r52096@freescale.com>
2008-08-25ENGR00058738 MX35 I2C master driverWu Guoxing
MX35 I2C master driver Signed-off-by: Guoxing Wu <b02248@freescale.com>
2008-08-25ENGR00059978 add mx35 nor flash supportJason Liu
add mx35 nor flash support Signed-off-by: Jason Liu <r64343@freescale.com>
2008-08-25ENGR00058762 implimentaion nand driver on mx35 platformJason Liu
Implimentaion nand driver on mx35 platform Signed-off-by: Jason Liu <r64343@freescale.com>
2008-08-25ENGR00070093 Add support for S20_LE and S24_LE audio format in SPDIFWallace Wang
Add the support for S20_LE and S24_LE audio format in spdif driver Signed-off-by: Wallace Wang <r59996@freescale.com>
2008-08-25ENGR00058715 Add i.MX35 machine specific layerFred Fan
Add supporting i.MX35 EVB and 3STACK board. The common modules such as clock, iomux, platform device, cpu and etc has implemented. And support machine specific layer code for EVB and 3STACK board. Just on 3STACK board, the virtual interrupts which is generated by CPLD has implemented. Signed-off-by:Fred Fan <r01011@freescale.com>
2008-08-25ENGR00069560 SI4702 FM radio device driverKevin Shen
FM chip set si4702 support Signed-off-by: Kevin Shen <b00984@freescale.com>
2008-08-25ENGR00069928: Add wm8350 bl check_fbRob Herring
Add check_fb function to wm8350 backlight driver, so that only fb0 blank/unblank will change the backlight state. Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00069841 Fix the compiling error caused by ENGR00068611Wallace Wang
missed including a header file Signed-off-by: Wallace Wang <r59996@freescale.com>
2008-08-25ENGR00068611 PMIC AUDIO and SSI drivers can not be loadable modulesWallace Wang
Merge ENGR0006861 Remove platform_device register in mxc-alsa-pmic.c Move clk_put to device.c Signed-off-by: Wallace Wang <r59996@freescale.com>
2008-08-25ENGR00069652 i.MX37 turn off spdif alsa audio by defaultAlan Tull
Turn off spdif alsa audio by default. Signed-off-by: Alan Tull <r80115@freescale.com>
2008-08-25ENGR00069338: Add PATA support for i.MX31 & i.MX37.Raj Rajasekaran
Added PATA driver for i.MX31ADS and i.MX37 3 stack boards. Signed-off-by: Raj Rajasekaran <b10872@freescale.com>
2008-08-25ENGR00069546 Fix MX31 3stack board boot problem with jffs2Kevin Zhang
MX31 3stack board boot problem with jffs2. It was caused by recent community JFFS2 patch to support MLC nand by NOT writing to oob area. Even though this is not needed for the NFC on MX31, we have to set the flag: mtd->flags &= ~MTD_OOB_WRITEABLE in the mxc_nd.c driver. Signed-off-by: Kevin Zhang <k.zhang@freescale.com>
2008-08-25ENGR00069342 Add Touchscreen Support for MX37 3Stack BoardMahesh Mahadevan
Add Support for Touchscreen on the 3-Stack board Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
2008-08-25ENGR00069540 MX31_3stack: Make GPO2 parent GPO1Nancy Chen
Set regulator GPO1 to be the parent of regulator GPO2 for MX31_3stack Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>
2008-08-25ENGR00066962 DPTC on MX31 TO1.x @ 27 Mhz not supportedYves vandervennet
sets the table pointer to NULL in this case (see devices.c) modified plat-mxc/dptc.c such that in this case, an error message is printed and DPTC is not init'ed. Signed-off-by: Yves vandervennet <r55763@freescale.com>
2008-08-25ENGR00066287 DPTC not disabled when MX31 out of turbo modeYves vandervennet
added function dptc_suspend(), called from clock.c Signed-off-by: Yves vandervennet <r55763@freescale.com>
2008-08-25ENGR00066288 update DPTC tables for MX31 TO2.0Yves vandervennet
tables for TO 2.0 monotonic tables for TO 1.x unchanged Signed-off-by: Yves vandervennet <r55763@freescale.com>
2008-08-25ENGR00069364 Adjust nand partition table to accommodate with redbootJason Liu
Adjust nand partition table to accommodate with redboot Signed-off-by: Jason Liu <r64343@freescale.com>
2008-08-25ENGR00069259 Add spdif to imx37 defconfig and fix an register settingWallace Wang
Add spdif driver to imx37 defconfig For some imx37 boards, the first time to play pcm out from spdif fails Signed-off-by: Wallace Wang <r59996@freescale.com>
2008-08-25ENGR00069205 CSR BT porting on i.MX31 3stackWallace Wang
Enable the uart2 for BT Fix the mxc_gpio_request for none gpio pins Signed-off-by: Wallace Wang <r59996@freescale.com>
2008-08-25ENGR00068636 MX31 3DS defconfig updateEric Chen
enable MMC/SD/CAMERA/DAB Signed-off-by: Eric Chen <xinyu.chen@freescale.com>
2008-08-25ENGR00069184 Make SLUB allocator default for MX37Rob Herring
Update MX37 defconfig to enable SLUB allocator Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00066977 : add USB controller driver, only device modeAlbert Chen
Mx37: add USB controller driver for device mode Signed-off-by: Albert Chen <r65187@freescale.com>
2008-08-25ENGR00069010 Add missing OV2640 config to ADS defconfigsRob Herring
Add missing OV2640 config to ADS defconfigs Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00068852 Add TVE driverRob Herring
Add driver for TVE TV encoder module on MX37. Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00057358 Add IPUv3 driver with fb and v4l2 supportRob Herring
Add IPUv3 driver Update framebuffer driver for IPUv3 Update V4L2 output driver for IPUv3 Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00064696 Add MX31 3-Stack CH7024 TV encoder driver.Rob Herring
This patch adds support for the MX31 3-Stack Chrontel CH7024 TV encoder driver. Signed-off-by: Rob Herring <r.herring@freescale.com>
2008-08-25ENGR00068855 Add missing .valid function for power managementKevin Zhang
Add missing .valid function for power management due to kernel upgrade. It was fixed in the 2.6.22 but was dropped when upgrading to 2.6.24. This fix impacts on MX27, MX31 and MXC91321 based platforms. Signed-off-by: Kevin Zhang <k.zhang@freescale.com>
2008-08-25ENGR00066775 i.mx37 spdif driver developmentWallace Wang
Add spdif tx driver DMA mode transfer bit: 16bit/32bit Signed-off-by: Wallace Wang <r59996@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-09 13:10:36 +0000