| Age | Commit message (Collapse) | Author |
|---|
|
The id removal left this machine check in which breaks the build on
some platforms. Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
MFD changes in 4ec1b54c ('mfd: mfd_cell is now implicitly available to
mc13xxx drivers') changed the mc13xxx_platform_data struct layout.
At the time all users were changed, but this driver was introduced in
another tree at the same time. This updates the mc13xxx_platform_data
user, fixing a build error.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
vlynq: Convert irq functions
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq; Fix cleanup fallout
genirq: Fix typo and remove unused variable
genirq: Fix new kernel-doc warnings
genirq: Add setter for AFFINITY_SET in irq_data state
genirq: Provide setter inline for IRQD_IRQ_INPROGRESS
genirq: Remove handle_IRQ_event
arm: Ns9xxx: Remove private irq flow handler
powerpc: cell: Use the core flow handler
genirq: Provide edge_eoi flow handler
genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
genirq: Split irq_set_affinity() so it can be called with lock held.
genirq: Add chip flag for restricting cpu_on/offline calls
genirq: Add chip hooks for taking CPUs on/off line.
genirq: Add irq disabled flag to irq_data state
genirq: Reserve the irq when calling irq_set_chip()
|
|
* 'for-linus' of git://www.jni.nu/cris:
Correct auto-restart of syscalls via restartblock
CRISv10: Fix return before mutex_unlock in pcf8563
Drop the CRISv32 version of pcf8563
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
mach-ux500: configure board for the TPS61052 regulator v2
mach-ux500: provide ab8500 init vector
mach-ux500: board support for AB8500 GPIO driver
gpio: driver for 42 AB8500 GPIO pins
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: Suspend: Fix dependency of ARCH_SUSPEND_POSSIBLE
ARM: SAMSUNG: Fix CPU idmask
ARM: EXYNOS4: Fix addruart macro
ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210
ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310
ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORM
ARM: S5PV210: Remove duplicated inclusion
ARM: S5PV210: Fix security engine interrupt names
ARM: S5P64X0: Fix iodesc array size for S5P6450
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni-intel - fixed problem with packets that are not multiple of 64bytes
|
|
* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score:
score: Use generic show_interrupts()
score: Convert to new irq function names
score: lost a semicolon in asm/irqflags.h
score: Select GENERIC_HARDIRQS_NO_DEPRECATED
score: Convert irq_chip to new functions
|
|
handle_prio_irq is almost identical with handle_fasteoi_irq. The
subtle differences are
1) The handler checks for IRQ_DISABLED after the device handler has
been called. In case it's set it masks the interrupt.
2) When the handler sees IRQ_DISABLED on entry it masks the interupt
in the same way as handle_fastoei_irq, but does not set the
IRQ_PENDING flag.
3) Instead of gracefully handling a recursive interrupt it crashes the
kernel.
#1 is just relevant when a device handler calls disable_irq_nosync()
and it does not matter whether we mask the interrupt right away or
not. We handle lazy masking for disable_irq anyway, so there is no
real reason to have this extra mask in place.
#2 will prevent the resend of a pending interrupt, which can result in
lost interrupts for edge type interrupts. For level type interrupts
the resend is a noop in the generic code. According to the
datasheet all interrupts are level type, so marking them as such
will result in the exact same behaviour as the private
handle_prio_irq implementation.
#3 is just stupid. Crashing the kernel instead of handling a problem
gracefully is just wrong. With the current semantics- all handlers
run with interrupts disabled - this is even more wrong.
Rename ack to eoi, remove the unused mask_ack, switch to
handle_fasteoi_irq and remove the private function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <20110202212552.299898447@linutronix.de>
|
|
The core handler is a full equivalent replacement.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current mainline codes of ARCH_S5P64X0 and ARCH_S5P6442
can not support suspend to ram. So needs this for preventing
build error on them.
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This patch fixes CPU idmask of S5P64X0 and EXYNOS4210
and its comparison method because just want to use CPU
id for it.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
Fix incorrect conditional execution of ldr instructions in
addruart macro.
Signed-off-by: Thomas Abraham <thomas.abraham@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This patch fixes smsc9215 irq ploarity configuration of SMDKC210.
We can change type of EINT(5) as HIGH, but it's better to change
IRQ output of smsc9215 as an active low because smsc's IRQ line
has been pull-up.
Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This patch fixes smsc9215 irq ploarity configuration of SMDKV310.
We can change type of EINT(5) as HIGH, but it's better to change
IRQ output of smsc9215 as an active low because smsc's IRQ line
has been pull-up.
Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This patch fixes following build warnings.
warning: (MACH_ARMLEX4210) selects SATA_AHCI_PLATFORM
which has unmet direct dependencies (ATA)
And adds EXYNOX4_DEV_AHCI for building machines which are
not suppoort for AHCI feature on board.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
Remove duplicated #include('s) in
arch/arm/mach-s5pv210/mach-smdkv210.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This change is intended to correct security subsystem interrupt names
for Samsung S5PV210 and S5PC110 SoCs.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
The array size parameter of iotable_init for S5P6450 is incorrect.
Fix this by passing the correct length of s5p6450_iodesc table.
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This registers the TPS61052 regulator to the ux500 MOP/HREF boards.
Cc: Samuel Ortiz <samuel.ortiz@intel.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This adds an ab8500 regulator initialization vector for the
HREF/MOP500 series of boards. This also sets the display
regulator to be on at boot so we don't loose our splash
screen when the board comes up.
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This is the board support patch for ab8500 gpio driver
on mach-ux500.Patch implements 16 virtual
IRQ mapped to 16 interrupt capable AB8500 GPIOs.
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
[Modify for header file placement]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
|
|
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
|
|
|
|
All chips converted and proper accessor functions used.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
|
|
Use the proper accessor functions in show_interrupts() while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tile: Use generic show_interupts()
tile: Convert to new irq function names
dma: Ipu: Convert interupt code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998
regulator: fix tps6524x section mismatch
regulator: Remove more wm831x-specific IRQ operations
regulator: add ab8500 enable and raise time delays
regulator: provide consumer interface for fall/rise time
regulator: add set_voltage_time_sel infrastructure
regulator: initialization for ab8500 regulators
regulator: add support for USB voltage regulator
regulator: switch the ab3100 to use enable_time()
Regulator: add suspend-finish API for regulator core.
regulator: fix typo in Kconfig
regulator: Convert WM831x regulators to genirq
regulator: If we fail when setting up a supply say which supply
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Clean up max8997 IRQ namespace
mfd: Fold irq_set_chip/irq_set_handler
mfd: Cleanup irq namespace
mfd: twl6030: Cleanup interrupt handling
mfd: twl4030: Cleanup interrupt handling
mfd: mx8925: Remove irq_desc leftovers
mfd: htc-i2cpld: Cleanup interrupt handling
mfd: htc-egpio: Cleanup interrupt handling
mfd: ezx-pcap: Remvove open coded irq handling
mfd: 88pm860x: Remove unused irq_desc leftovers
mfd: asic3: Cleanup irq handling
mfd: Select MFD_CORE if TPS6105X driver is configured
mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
mfd: Add MAX8997/8966 IRQ control
mfd: Constify i2c_device_id tables
mfd: OLPC: Clean up names to match what OLPC actually uses
mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
hwspinlock: depend on OMAP4
ARM: OMAP2+: Fix warnings for GPMC interrupt
OMAP4: PandaBoard: remove unused power regulators
arm: mach-omap2: omap_l3_smx: fix irq handler setup
arm: mach-omap2: devices: fix omap3_l3_init() return value
|
|
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits)
mtd: mtdswap: fix compilation warning
mtdswap: kill strict error handling option
mtd: nand: enable software BCH ECC in nand simulator
mtd: nand: add software BCH ECC support
mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
mtd: sm_rtl: check kmalloc return value
mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
lib: add shared BCH ECC library
mtd: mxc_nand: fix OOB corruption when page size > 2KiB
mtd: DaVinci: Removed header file that is not required
mtd: pxa3xx_nand: clean the keep configure code
mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
mtd: pxa3xx_nand: unify prepare command
mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
mtd: pxa3xx_nand: rework irq logic
mtd: pxa3xx_nand: make scan procedure more clear
mtd: speedtest: fix integer overflow
mtd: mxc_nand: fix read past buffer end
mtd: omap3: nand: report corrected ecc errors
jffs2: remove a trailing white space in commentaries
...
|
|
Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
64bytes
This patch fixes problem with packets that are not multiple of 64bytes.
Signed-off-by: Adrian Hoban <adrian.hoban@intel.com>
Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that
and simply have the olpc-xo1.c driver use "cs5535-pms" directly.
Also, rename the cs5535-acpi clones to what we actually use for the (currently
out-of-tree) SCI driver. In the process, that fixes a subtle bug in
olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not
something that actually existed.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The
former was called by an mfd client, and registered both a platform driver
and device. The latter is called by an mfd driver, and registers only a
platform device.
The downside of this is that mfd drivers need to be modified whenever
new clients are added that share a cell; the upside is that it fits
Linux's driver model better. It's also simpler.
This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd
now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to
them via platform drivers.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
The regulators on the AB8500 have a lot of custom
hardware control settings pertaining to 8 external
signals, settings which are board-specific and need
be provided from the platform at startup.
Initialization added for regulators Vana, VextSupply1,
VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout,
Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR.
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
Introduce ARCH_NO_SYSDEV_OPS config option (v2)
cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
KVM: Use syscore_ops instead of sysdev class and sysdev
PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
timekeeping: Use syscore_ops instead of sysdev class and sysdev
x86: Use syscore_ops instead of sysdev classes and sysdevs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kdb: add usage string of 'per_cpu' command
kgdb,x86_64: fix compile warning found with sparse
kdb: code cleanup to use macro instead of value
kgdboc,kgdbts: strlen() doesn't count the terminator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
genirq: Expand generic show_interrupts()
gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
gpio: Cleanup genirq namespace
arm: ep93xx: Add basic interrupt info
arm/gpio: Remove three copies of broken and racy debug code
xtensa: Use generic show_interrupts()
xtensa: Convert genirq namespace
xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
xtensa: Convert s6000 gpio irq_chip to new functions
xtensa: Convert main irq_chip to new functions
um: Use generic show_interrupts()
um: Convert genirq namespace
m32r: Use generic show_interrupts()
m32r: Convert genirq namespace
h8300: Use generic show_interrupts()
h8300: Convert genirq namespace
avr32: Cleanup eic_set_irq_type()
avr32: Use generic show_interrupts()
avr: Cleanup genirq namespace
avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
...
Fix up trivial conflict in drivers/gpio/timbgpio.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
perf symbols: Look at .dynsym again if .symtab not found
perf build-id: Add quirk to deal with perf.data file format breakage
perf session: Pass evsel in event_ops->sample()
perf: Better fit max unprivileged mlock pages for tools needs
perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
perf top: Fix uninitialized 'counter' variable
tracing: Fix set_ftrace_filter probe function display
perf, x86: Fix Intel fixed counters base initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: Fix WARN_ON() test for UP
WARN_ON_SMP(): Allow use in if() statements on UP
x86, dumpstack: Use %pB format specifier for stack trace
vsprintf: Introduce %pB format specifier
lockdep: Remove unused 'factor' variable from lockdep_stats_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
x86: DT: Fix return condition in irq_create_of_mapping()
x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: merge m68k and m68knommu arch directories
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc32: Fix multiple RTC detections on SUN4D
|
|
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] cmpxchg: implement cmpxchg64()
[S390] xchg/cmpxchg: move to own header file
[S390] ccwgroup_driver: remove duplicate members
[S390] ccw_bus_type: make it static
[S390] ccw_driver: remove duplicate members
[S390] qdio: prevent handling of buffers if count is zero
[S390] setup: register bss section as resource
[S390] setup: simplify setup_resources()
[S390] wire up sys_syncfs
[S390] wire up sys_clock_adjtime
[S390] wire up sys_open_by_handle_at
[S390] wire up sys_name_to_handle_at
[S390] oprofile: disable hw sampling for CONFIG_32BIT
[S390] early: limit savesys cmd string handling
[S390] early: Fix possible overlapping data buffer
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
LKML-Reference: <20110325142049.536190130@linutronix.de>
|
|
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
LKML-Reference: <20110325142049.441954268@linutronix.de>
|
|
Fix sparse warning:
arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
|
|
The jz4740 nand driver now requires that the ecc offsets are set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
