summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-10-19ARM: OMAP1: Use generic map_io, init_early and init_irqTony Lindgren
This allows removing omap hacks for map_io allowing generic map_io. Note that in the future we can't do cpu_is_omapxxxx detection until in init_early. This means that board-innovator.c now assumes 15xx only, and board-generic.c assumes 16xx only. This is best fixed later on by passing the SoC type from device tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-04arm/dts: OMAP3+: Add mpu, dsp and iva nodesBenoit Cousson
Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-10-04arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driverBenoit Cousson
Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-10-04ARM: OMAP2+: l3-noc: Add support for device-treeBenoit Cousson
Add device-tree support for the l3-noc driver. Use platform_driver_register to defer the probing at device init time. Add documentation for the l3-noc bindings. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-10-04ARM: OMAP2+: board-generic: Add i2c static initBenoit Cousson
Still needed to boot until the i2c & twl driver is adapted to device-tree. Otherwise the voltage control code will try to access the twl and crash. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2011-10-04ARM: OMAP2+: board-generic: Add DT support to generic boardBenoit Cousson
Re-cycle the original board-generic.c file to support Device Tree for every OMAP2+ variants. The current approach is an intermediate step before having only one machine descriptor that will use some generic DT aware functions. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2011-10-04arm/dts: Add support for OMAP3 Beagle boardBenoit Cousson
Add OMAP3 beagleboard DTS file to use the omap3.dtsi SoC file. Add a default bootargs line to allow a boot from RAMDISK. Add memory node information. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-04arm/dts: Add initial device tree support for OMAP3 SoCBenoit Cousson
Add initial OMAP3 soc file with empty ocp bus. Based on initial patch from Manju: http://www.spinics.net/lists/linux-omap/msg55830.html Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-04arm/dts: Add support for OMAP4 SDP boardBenoit Cousson
Add the SDP/Blaze (Software Development Board) support with device tree. That file is based on the omap4-panda.dts. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-04arm/dts: Add support for OMAP4 PandaBoardBenoit Cousson
Based on the original omap4-panda.dts file from Manju. http://www.spinics.net/lists/linux-omap/msg55836.html Add memory information and a default bootargs to allow a boot from RAMDISK. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-04arm/dts: Add initial device tree support for OMAP4 SoCBenoit Cousson
Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-04ARM: OMAP: omap_device: Add a method to build an omap_device from a DT nodeBenoit Cousson
Add a notifier called during device_add phase. If an of_node is present, retrieve the hwmod entry in order to populate properly the omap_device structure. For the moment the resource from the device-tree are overloaded. DT does not support named resource yet, and thus, most driver will not work without that information. Add a documentation to capture the specifics OMAP bindings needed for device-tree support. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integrationBenoit Cousson
Split the omap_device_build_ss into two smaller functions that will allow to populate a platform_device already allocated by device-tree. The functionality of the omap_device_build_ss is still the same, but the omap_device_alloc will be usable with devices already built by device-tree. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP2+: devices: Remove all omap_device_pm_latency structuresBenoit Cousson
Remove all these duplicated structures since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP: omap_device: Create a default omap_device_pm_latencyBenoit Cousson
Most devices are using the same default omap_device_pm_latency structure during device built. In order to avoid the duplication of the same structure everywhere, add a default structure that will be used if the device does not have an explicit one. Next patches will clean the duplicated structures. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PMBenoit Cousson
Since the device pointer is now retrieved using the hwmod name, remove the static variables used to store the device pointers for DSP, MPU, IVA and L3 devices for PM/DVFS usage. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP2+: pm: Use hwmod name instead of dev pointerBenoit Cousson
Replace the struct device parameter of omap2_set_init_voltage by the hwmod name. It will avoid having to store explicitely the device pointer into a static variable. Moreover, it will be a little bit more scalable if we introduce new DVFS devices. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP3: beagle-board: Use the omap_hwmod_name_get_dev APIBenoit Cousson
Replace the multiple omap2_get_XXX_device APIs with the new omap_hwmod_name_get_dev that uses the hwmod name to get the proper device. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04ARM: OMAP: omap_device: Add omap_device_get_by_hwmod_nameNishanth Menon
An API which translates a standard hwmod name to corresponding platform_device is useful for drivers when they need to look up the device associated with a hwmod name to map back into the device structure pointers. These ideally should be used by drivers in mach directory. Using a generic hwmod name like "gpu" instead of the actual device name which could change in the future, allows us to: a) Could in effect help replace apis such as omap2_get_mpuss_device, omap2_get_iva_device, omap2_get_l3_device, omap4_get_dsp_device, etc.. b) Scale to more devices rather than be restricted to named functions c) Simplify driver's platform_data from passing additional fields all doing the same thing with different function pointer names just for accessing a different device name. Signed-off-by: Nishanth Menon <nm@ti.com> [b-cousson@ti.com: Adapt it to the new pdev pointer inside od, remove the unneeded helpers, and fold the next patch here] Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-04Merge branches 'cleanup-part3', 'voltage', 'dmtimer' and 'l3' into dt-baseTony Lindgren
2011-10-03ARM: OMAP: irq: loop counter fix in omap_init_irq()Tapani Utriainen
Fixes bug where variable i was redundantly used for counting two nested loops. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-03ARM: OMAP4: Keyboard: Fix section mismatch in the board fileBjarne Steinsbo
`keypad_pads' is referred to by `keypad_data' which is not __initdata, so `keypad_pads' should not be __initdata either. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_initAxel Lin
Current code calls omap4430_phy_init() twice in usb_musb_init(). Calling omap4430_phy_init() once is enough. This patch removes the first omap4430_phy_init() call, which using an uninitialized pointer as parameter. This patch elimates below build warning: arch/arm/mach-omap2/usb-musb.c: In function 'usb_musb_init': arch/arm/mach-omap2/usb-musb.c:141: warning: 'dev' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin@gmail.com> Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP: Fix i2c init for twl4030Tony Lindgren
Looks like 2600 kHz rate does not work reliably on 2430, so just use the 100 kHz rate. Otherwise the system often fails to boot properly with: omap_i2c omap_i2c.2: timeout waiting for bus ready omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages twl: clock init err [-110] omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages TWL4030 Unable to unlock IDCODE registers --110 Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1Bryan Buckley
Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley <bryan.buckley@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-28Merge branch 'for_3_2/omap_misc' of ↵Tony Lindgren
git://gitorious.org/omap-sw-develoment/linux-omap-dev into l3
2011-09-26ARM: OMAP2+: Remove custom init_irq for remaining boardsTony Lindgren
With SoC specific timers, board specific init_irq is no longer needed. Earlier this was still needed to initialize the gptimer12 on Beagle based boards. Also convert board-h4.c to use omap2_init_irq accidentally did not get converted earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP2+: Use SoC specifc map_ioTony Lindgren
There's no longer any need for the board specific map_io. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP2+: Add SoC specific map_io functionsBenoit Cousson
Add SoC specific map_io function to be used by the generic DT board file. This is an intermediate step before having some generic DT aware map_io function. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Start generalize signal muxing functionsJarkko Nikula
This generalizes the omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src implementation between generic McBSP and OMAP2 specific McBSP code. These functions are used to select source for CLKR and FSR signals on OMAP2+. Start generalizing the code by implementing an optional mux_signal function pointer in platform data that will implement the actual muxing and which is called now from omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src. These functions are to be removed later and cleanup the API so that mux_signal gets its arguments directly from client code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_srcJarkko Nikula
This generalizes the omap2_mcbsp_set_clks_src implementation between generic McBSP and OMAP2 specific McBSP code. Currently this function is used to select either internal fclk or clks pin as a McBSP CLKS source on OMAP2+. Implement generalization by having an optional set_clk_src function pointer in platform data that is used to select parent for a given clock. Idea is to pass higher level source clock name (later coming from client driver) that platform specific code will map to platform specific clock name. API cleanup between McBSP and client code comes later. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.cJarkko Nikula
These address definitions are OMAP1 specific can be in single source file. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Update mcbsp.h include dependenciesJarkko Nikula
hardware.h is not needed here and let the definition for struct clk to come via linux/clk.h. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Cleanup sidetone control initialization and make it genericJarkko Nikula
Sidetone resource is already registered for a device so there is no need for cpu_is_omap34xx() and McBSP port number tests in the driver. We can cleanup and make the code generic by dropping remaining CONFIG_ARCH_OMAP3 conditional compilations and then using sidetone resource and st_data variable for runtime tests. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.cJarkko Nikula
Active sidetone requires that McBSP interface clock doesn't idle and there is no mechanism in hwmod to turn autoidling on/off in runtime. McBSP2 and 3 in OMAP34xx share their interface clock with McBSP sidetone module and that interface clock must be active when the sidetone is operating. Sidetone has its own autoidle bit which should keep the interface clock active but it is broken. Putting the McBSP core to no-idle mode when the sidetone is active is no good either since it results to higher power consumption when using the threshold based DMA transfers. For making the McBSP code more generic, move this sidetone clock management with fixme comments to mach-omap2/mcbsp.c and pass pointer to it via platform data. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Wamsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Use per instance register cache sizeJarkko Nikula
Rationale here is to remove one global variable and to make possible to have variable size McBSP register maps inside SoC. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Make threshold based transfer code genericJarkko Nikula
Remove CONFIG_ARCH_OMAP3 conditional compilation and cpu_is_omap34xx test around buffer threshold based transfer and DMA operating mode control. Use instead the buffer_size in platform data to determine when these sysfs controls are exposed and when to access related McBSP registers. Rationale for this is to make code generic and to allow to use it on OMAP4 that also supports threshold based transfers. Currently buffer_size variable is set only for OMAP3 SoCs but it is easy to extend to OMAP4 and any later OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Make tranceiver configuration control register access genericJarkko Nikula
McBSP transmit and receive configuration control registers must be set up for OMAP2430 and later. Replace is_omap tests in generic code with a new feature flag has_ccr in platform data so that there is no need to change code for any upcoming OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Make wakeup control genericJarkko Nikula
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is set even it should be available for CONFIG_ARCH_OMAP4 only builds also. Fix this by making wakeup control generic so that it is executed whenever new feature flag has_wakeup in platform data is set. Currently flag is set for McBSP config types 3 and 4. Remove also old comments about idle mode settings and HW bug workarounds that were not updated during hwmod conversion. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Implement generic register accessJarkko Nikula
Register access can be made more generic by calculating register address offsets runtime from common register definitions and by using reg_size and reg_step variables that are passed via platform data. Common register definitions are possible since McBSP registers are ordered similarly between OMAP versions. Remove also references to OMAP2+ specific config_type variable from generic McBSP code since other variables and feature flags are better to carry needed information from platform code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from ↵Jarkko Nikula
plat-omap/devices.c Only OMAP1s are using omap_mcbsp_register_board_cfg after OMAP2+ hwmod conversion so it can be moved to mach-omap1/mcbsp.c. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Remove unused variables from platform dataJarkko Nikula
These variables got unused after McBSP was converted to use resource structures. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsungLinus Torvalds
* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
2011-09-27ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-27ARM: S5PV210: Rename sclk_cam clocks for FIMC media driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvmLinus Torvalds
* 'kvm-updates/3.1' of git://github.com/avikivity/kvm: KVM: x86 emulator: fix Src2CL decode KVM: MMU: fix incorrect return of spte
2011-09-26Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op ARM: dma-mapping: free allocated page if unable to map ARM: fix vmlinux.lds.S discarding sections ARM: nommu: fix warning with checksyscalls.sh ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed
2011-09-26ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_opWill Deacon
The SMP implementation of __futex_atomic_op clobbers oldval with the status flag from the exclusive store. This causes it to always read as zero when performing the FUTEX_OP_CMP_* operation. This patch updates the ARM __futex_atomic_op implementations to take a tmp argument, allowing us to store the strex status flag without overwriting the register containing oldval. Cc: stable@kernel.org Reported-by: Minho Ban <mhban@samsung.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ARM: dma-mapping: free allocated page if unable to mapRussell King
If the attempt to map a page for DMA fails (eg, because we're out of mapping space) then we must not hold on to the page we allocated for DMA - doing so will result in a memory leak. Cc: <stable@kernel.org> Reported-by: Bryan Phillippe <bp@darkforest.org> Tested-by: Bryan Phillippe <bp@darkforest.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ARM: S5P: fix incorrect loop iterator usage on gpio-interruptMarek Szyprowski
Loop iterator value after terminating list_for_each_entry() is not NULL. This patch fixes incorrect iterator usage in GPIO interrupt code for SAMSUNG S5P platforms. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-04 18:35:23 +0000