summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-12-12ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing
2012-12-12ENGR00236031 MX6 USB :Change default USB H1 and OTG driver load ordermake shi
2012-12-05ENGR00235624 Quad/DualLite ARD: MTD partition non alignedAlejandro Sierra
2012-12-05ENGR00235630 MX6 USB :fix USB does not work when plug in device during suspendmake shi
2012-11-29ENGR00235268: change caam_ipg_clk's CG to CG6Terry Lv
2012-11-29ENGR00235081 Quad DL: Fix chip select for SPI-NOR and flagsAlejandro Sierra
2012-11-28ENGR00234685-2 mx6q_sabreauto: change Sabreauto board to LDO-ENABLED modeRobin Gong
2012-11-28ENGR00234685-1 cpufreq:fix one bug in cpufreq driver if I2C transfer errorRobin Gong
2012-11-28ENGR00234531 fix MFGTOOL issue after USB module loadable doneTony LIU
2012-11-28ENGR00234411-2 CPUFREQ: fix one code bug on regulator restore when failRobin Gong
2012-11-28ENGR00234411-1 Sabreauto: fix error print COULD NOT SET GP VOLTAGE.Robin Gong
2012-11-28ENGR00234354-2: board-mx6q_sabreauto aline weim-nor partition layoutAdrian Alonso
2012-11-28ENGR00234354-1: board-mx6q_sabreauto aline spi-nor partition layoutAdrian Alonso
2012-11-20ENGR00234217 cpufreq:fix loops_per_jiffy wrong on new suspend flow of cpufreqRobin Gong
2012-11-19ENGR00234045 fix building error caused by ENGR00233366Robin Gong
2012-11-19ENGR00233366-4 WDOG LDO_BYPASS: fix wdog2 to reset external pmic in ldo bypassRobin Gong
2012-11-19ENGR00233366-3 CPUFREQ:add cpufreq restore back if set failRobin Gong
2012-11-19ENGR00233366-2 mx6q_sabresd mx6sl_arm2 mx6sl_evk: config in LDO bypassRobin Gong
2012-11-19ENGR00233366-1 Anatop PFUZE: LDO bypass can be configed by cmdlineRobin Gong
2012-11-19ENGR00234040 FUSE 1.2G: add fuse bit for 1.2GRobin Gong
2012-11-17ENGR00233770 i.mx6q/vpu: Add fuse check for VPU_DISABLE featureJason Liu
2012-11-16ENGR00233705 [MX6SL] -Fix suspend/resume issue when SD1 is used to boot.Ranjani Vaidyanathan
2012-11-16ENGR00233929: add kernel command line to enable snvsTerry Lv
2012-11-16ENGR00233387: MLB: read fuse to check if to enable mlbTerry Lv
2012-11-15ENGR00233728 mx6 usb: change usb driver load from arch_initcall to module_initmake shi
2012-11-15ENGR00233732 mx6dl: change 996M setpoint voltageAnson Huang
2012-11-14ENGR00233051-03 Mx6 USB: msl implementation for USB OTG modulizationmake shi
2012-11-14ENGR00233051-02 Mx6 USB: msl headfile for OTG modulizationmake shi
2012-11-14ENGR00233051-01 Mx6 USB: configure change for OTG modulizationmake shi
2012-11-13ENGR00232945-4: CAAM: enable SNVS configTerry Lv
2012-11-09ENGR00224109 - MX6 : FEC : optimize ENET_REF_CLK PAD configuration.Fugang Duan
2012-11-07ENGR00232586 mx6: increase PUPSCR to make sure LDO is ready for resumeAnson Huang
2012-11-06ENGR00231266-4: board-mx6q_sabreauto adv7280 csi-tx slave addressAdrian Alonso
2012-11-06ENGR00231773-7 DMA: add interface to trigger SDMA event pending bitChen Liangjun
2012-11-05ENGR00232327 MX6SL-Optimize board level suspend powerRanjani Vaidyanathan
2012-11-05ENGR00232326 MX6x-Fix incorrect I2C bitrateRanjani Vaidyanathan
2012-11-05ENGR00225875-1 i.MX6Q/Solo SabreAuto Infineon Bluetooth uart3 configIsrael Perez
2012-11-02ENGR00231826 imx esdhc: Add the DMA mask for esdhc device register.Xinyu Chen
2012-11-01ENGR00232087-1 MX6: Enable PU LDO gating.Hongzhang Yang
2012-10-31ENGR00231910 PU regulator: do not disable PU regulatorRobin Gong
2012-10-29ENGR00231063 Sabreauto: fix share pins SD Card and NFCAlejandro Sierra
2012-10-29ENGR00230538-10: imx6: CAAM: enable secure memory and sm test in defconfigTerry Lv
2012-10-29ENGR00230538-2: CAAM: Add Secure Memory and SNVS propertiesSteve Cornelius
2012-10-29ENGR00230538-1: CAAM: Correct shifting offset for CAAM IPG clock selectionSteve Cornelius
2012-10-29ENGR00231321-1 mx6: remove wm8958 in imx6_defconfigGary Zhang
2012-10-26ENGR00230981-2 pfuze:standby voltage increase for PFMRobin Gong
2012-10-26ENGR00231331 mtd: gpmi: add kernel command line to enable gpmi in arm2 boardHuang Shijie
2012-10-26ENGR00231104 i.MX cpufreq: add scaling_available_freqs attributeLin Fuzhen
2012-10-25ENGR00230167 MX6 regulator: enable and raise the voltage of USB 3p0 LDOmake shi
2012-10-23ENGR00229785 pgc: disable display power gating when FB_MXC_ELCDIF_FB configuredRobby Cai
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-25 06:46:29 +0000