summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-06-02xen: add new Xen elfnote types and use them appropriatelyJeremy Fitzhardinge
Define recently added XEN_ELFNOTEs, and use them appropriately. Most significantly, this enables domain checkpointing (xm save -c). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: resume timers on all vcpusJeremy Fitzhardinge
On resume, the vcpu timer modes will not be restored. The timer infrastructure doesn't do this for us, since it assumes the cpus are offline. We can just poke the other vcpus into the right mode directly though. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: restore vcpu_info mappingJeremy Fitzhardinge
If we're using vcpu_info mapping, then make sure its restored on all processors before relasing them from stop_machine. The only complication is that if this fails, we can't continue because we've already made assumptions that the mapping is available (baked in calls to the _direct versions of the functions, for example). Fortunately this can only happen with a 32-bit hypervisor, which may possibly run out of mapping space. On a 64-bit hypervisor, this is a non-issue. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: avoid hypercalls when updating unpinned pud/pmdJeremy Fitzhardinge
When operating on an unpinned pagetable (ie, one under construction or destruction), it isn't necessary to use a hypercall to update a pud/pmd entry. Jan Beulich observed that a similar optimisation avoided many thousands of hypercalls while doing a kernel build. One tricky part is that early in the kernel boot there's no page structure, so we can't check to see if the page is pinned. In that case, we just always use the hypercall. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: export get_phys_to_machineIngo Molnar
-tip testing found the following xen-console symbols trouble: ERROR: "get_phys_to_machine" [drivers/video/xen-fbfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/net/xen-netfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/input/xen-kbdfront.ko] undefined! with: http://redhat.com/~mingo/misc/config-Mon_Jun__2_12_25_13_CEST_2008.bad
2008-05-28xen: fix early bootup crash on native hardwareIngo Molnar
-tip tree auto-testing found the following early bootup hang: --------------> get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [Nvidia] BUG: Int 14: CR2 ffd00040 EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0 EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040 err 00000000 EIP 802c055a CS 00000060 flg 00010006 Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4 80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531 00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000 Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570 [<802c055a>] ? strncmp+0x11/0x25 [<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568 [<801079c8>] ? mcount_call+0x5/0x9 [<802c0531>] ? strcmp+0xa/0x22 [<80129999>] ? printk+0x38/0x3a [<80129999>] ? printk+0x38/0x3a [<8011b122>] ? memory_present+0x66/0x6f [<80b216b4>] ? setup_memory+0x13/0x40c [<80b16b47>] ? propagate_e820_map+0x80/0x97 [<80b1622a>] ? setup_arch+0x248/0x477 [<80129999>] ? printk+0x38/0x3a [<80b11759>] ? start_kernel+0x6e/0x2eb [<80b110fc>] ? i386_start_kernel+0xeb/0xf2 ======================= <------ with this config: http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad The thing is, the crash makes little sense at first sight. We crash on a benign-looking printk. The code around it got changed in -tip but checking those topic branches individually did not reproduce the bug. Bisection led to this commit: | d5edbc1f75420935b1ec7e65df10c8f81cea82de is first bad commit | commit d5edbc1f75420935b1ec7e65df10c8f81cea82de | Author: Jeremy Fitzhardinge <jeremy@goop.org> | Date: Mon May 26 23:31:22 2008 +0100 | | xen: add p2m mfn_list_list Which is somewhat surprising, as on native hardware Xen client side should have little to no side-effects. After some head scratching, it turns out the following happened: randconfig enabled the following Xen options: CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 # CONFIG_XEN_BLKDEV_FRONTEND is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_HVC_XEN=y # CONFIG_XEN_BALLOON is not set which activated this piece of code in arch/x86/xen/mmu.c: > @@ -69,6 +69,13 @@ > __attribute__((section(".data.page_aligned"))) = > { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; > > +/* Arrays of p2m arrays expressed in mfns used for save/restore */ > +static unsigned long p2m_top_mfn[TOP_ENTRIES] > + __attribute__((section(".bss.page_aligned"))); > + > +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] > + __attribute__((section(".bss.page_aligned"))); The problem is, you must only put variables into .bss.page_aligned that have a _size_ that is _exactly_ page aligned. In this case the size of p2m_top_mfn_list is not page aligned: 80b8d000 b p2m_top_mfn 80b8f000 b p2m_top_mfn_list 80b8f008 b softirq_stack 80b97008 b hardirq_stack 80b9f008 b bm_pte So all subsequent variables get unaligned which, depending on luck, breaks the kernel in various funny ways. In this case what killed the kernel first was the misaligned bootmap pte page, resulting in that creative crash above. Anyway, this was a fun bug to track down :-) I think the moral is that .bss.page_aligned is a dangerous construct in its current form, and the symptoms of breakage are very non-trivial, so i think we need build-time checks to make sure all symbols in .bss.page_aligned are truly page aligned. The Xen fix below gets the kernel booting again. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-27xen: maintain clock offset over save/restoreJeremy Fitzhardinge
Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: implement save/restoreJeremy Fitzhardinge
This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add p2m mfn_list_listJeremy Fitzhardinge
When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make dummy_shared_info non-staticJeremy Fitzhardinge
Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: efficiently support a holey p2m tableJeremy Fitzhardinge
When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add configurable max domain sizeJeremy Fitzhardinge
Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make phys_to_machine structure dynamicJeremy Fitzhardinge
We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: count resched interrupts properlyJeremy Fitzhardinge
Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: Move manage.c to drivers/xen for ia64/xen supportIsaku Yamahata
move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make earlyprintk=xen work againJeremy Fitzhardinge
For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com>
2008-05-27xen: Enable console tty by default in domU if it's not a dummyMarkus Armbruster
Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27x86/paravirt: add pte_flags to just get pte flagsJeremy Fitzhardinge
Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: don't worry about preempt during xen_irq_enable()Jeremy Fitzhardinge
When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: allow some cr4 updatesJeremy Fitzhardinge
The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: use new sched_opJeremy Fitzhardinge
Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: use hypercall rather than cltsJeremy Fitzhardinge
Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22xen: remove support for non-PAE 32-bitJeremy Fitzhardinge
Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-21provide out-of-line strcat() for m68kAl Viro
Whether we sidestep it in init/main.c or not, such situations will arise again; compiler does generate calls of strcat() on optimizations, so we really ought to have an out-of-line version... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21MODULE_LICENSE expects "GPL v2", not "GPLv2"Al Viro
... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21thanks to net/mac80211 we need to pull drivers/leds/Kconfig on umlAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21missing export of csum_partial() on uml/amd64Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21uml: add missing exports for UML_RANDOM=mAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21fix include order in sys-i386/registers.cAl Viro
We want sys/ptrace.h before any includes of linux/ptrace.h and asm/user.h pulls the latter. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21missed kmalloc() in pcap_user.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add global register dumping facility. sparc: remove CVS keywords sparc64: remove CVS keywords
2008-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: correct mailing list address PCI: Correct last two HP entries in the bfsort whitelist
2008-05-20Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Update defconfigs for desktop/server systems [POWERPC] Fix mpc8377_mds.dts DMA nodes to match spec [POWERPC] Update arch/powerpc/boot/.gitignore [POWERPC] Remove generated files on make clean [POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keyword [POWERPC] Update Cell MAINTAINERS entry, add spufs entry lmb: Fix compile warning
2008-05-20[POWERPC] Update defconfigs for desktop/server systemsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2008-05-20sparc64: Add global register dumping facility.David S. Miller
When a cpu really is stuck in the kernel, it can be often impossible to figure out which cpu is stuck where. The worst case is when the stuck cpu has interrupts disabled. Therefore, implement a global cpu state capture that uses SMP message interrupts which are not disabled by the normal IRQ enable/disable APIs of the kernel. As long as we can get a sysrq 'y' to the kernel, we can get a dump. Even if the console interrupt cpu is wedged, we can trigger it from userspace using /proc/sysrq-trigger The output is made compact so that this facility is more useful on high cpu count systems, which is where this facility will likely find itself the most useful :) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20sparc: remove CVS keywordsAdrian Bunk
This patch removes the CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20sparc64: remove CVS keywordsAdrian Bunk
This patch removes the CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20[POWERPC] Fix mpc8377_mds.dts DMA nodes to match specKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20[POWERPC] Update arch/powerpc/boot/.gitignoreKumar Gala
* Add dtbImage.* * Added zImage.holly * Folded zImage.coff.lds into zImage.*lds * Removed some unused zImage.<foo> ignores Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20[POWERPC] Remove generated files on make cleanKumar Gala
dtbImage.* and several zImage. targets get created but never cleaned up. Also, moved zImage to the clean-files line associated with all other image results (was previously duplicated). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] return to old errno choice in mkdir() et.al. [Patch] fs/binfmt_elf.c: fix wrong return values [PATCH] get rid of leak in compat_execve() [Patch] fs/binfmt_elf.c: fix a wrong free [PATCH] avoid multiplication overflows and signedness issues for max_fds [PATCH] dup_fd() part 4 - race fix [PATCH] dup_fd() - part 3 [PATCH] dup_fd() part 2 [PATCH] dup_fd() fixes, part 1 [PATCH] take init_files to fs/file.c
2008-05-19Merge branch 'for-2.6.26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx * 'for-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx: [POWERPC] 4xx: Workaround for CHIP_11 Errata
2008-05-20[POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keywordAdrian Bunk
This removes a CVS keyword that wasn't updated for a long time from a comment. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin SPORTS UART Driver: converting BFIN->BLACKFIN Blackfin serial driver: add extra IRQ flag for 8250 serial driver 8250 Serial Driver: Added support for 8250-class UARTs in HV Sistemas H8606 board Blackfin arch: Fix bug - USB fails to build for BF524/BF526 Blackfin arch: update boards defconfig files Blackfin arch: IO Port functions to read/write unalligned memory Blackfin arch: enable a choice to provide 4M DMA memory Blackfin arch: cleanup the icplb/dcplb multiple hit checks Blackfin arch: Add workaround to read edge triggered GPIOs Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr. Blackfin arch: Check for Anomaly 05000182 [Blackfin] arch: rename bf5xx-flash to bfin-async-flash [Blackfin] arch: Blackfin checksum annotations
2008-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix up restorer in debug_trap exception return path. sh: Make is_valid_bugaddr() more intelligent on nommu. sh: use the common ascii hex helpers sh: fix sh7785 master clock value sh: Fix up thread info pointer in syscall_badsys resume path. sh: Fix up optimized SH-4 memcpy on big endian. sh: disable initrd defaults in .empty_zero_page. sh: display boot params by default on entry.
2008-05-19Merge branch 'kvm-updates-2.6.26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: LAPIC: ignore pending timers if LVTT is disabled KVM: Update MAINTAINERS for new mailing lists KVM: Fix kvm_vcpu_block() task state race KVM: ia64: Set KVM_IOAPIC_NUM_PINS to 48 KVM: ia64: fix GVMM module including position-dependent objects KVM: ia64: Define new kvm_fpreg struture to replace ia64_fpreg KVM: PIT: take inject_pending into account when emulating hlt s390: KVM guest: fix compile error KVM: x86 emulator: fix writes to registers with modrm encodings
2008-05-19PCI: Correct last two HP entries in the bfsort whitelistTony Camuso
Replace Redundant Whitelist Entries with the Correct Ones The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the dmi_system_id table. What should have been there are the DL360 and DL380. This patch simply replaces the redundant entries with the correct entries. Signed-off-by: Tony Camuso <tony.camuso@hp.com> Signed-off-by: Pat Schoeller <patrick.schoeller@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-19[POWERPC] 4xx: Workaround for CHIP_11 ErrataJosh Boyer
The PowerPC 440EP, 440GR, 440EPx, and 440GRx chips have an issue that causes the PLB3-to-PLB4 bridge to wait indefinitely for transaction requests that cross the end-of-memory-range boundary. Since the DDR controller only returns the valid portion of a read request, the bridge will prevent other PLB masters from completing their transactions. This implements the recommended workaround for this errata for chips that use older versions of firmware that do not already handle it. The last 4KiB of memory are hidden from the kernel to prevent the problem transactions from occurring. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-19sh: Fix up restorer in debug_trap exception return path.Paul Mundt
There are a few different types of debug trap exceptions, though now that they are all going through a special jump table, the restorer needs to be unified as well. Presently this is falling through the ret_from_fork path, which more or less does the right thing on SH-3/4 whilst being completely unsuitable on MMU-less targets. Ultimately what we want here is a branch through the platform's restore_all directly, without worrying about the retval being clobbered. We can accomplish that through a branch to __restore_all directly, so switch it so we come back from the jump table and branch to the restorer. This fixes up a recursion in the nommu WARN_ON() path, as well as some other userspace nastiness where said recursion caused serious stack corruption. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-03 20:59:15 +0000