summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-04-28ENGR00181191 MX6: set ipu2_clk parent from pll2_pfd_400MWayne Zou
2012-04-28ENGR00181107 add dma_alloc_writethrough functionSandor Yu
2012-04-27ENGR00180424: Changed iomux ID pinGuillermo
2012-04-27ENGR00180076: prompt "mmc0: error -110 during resume" with atheros wifi cardjustin.jiang
2012-04-26ENGR00180882- MX6DL Add bus frequency scaling support.Ranjani Vaidyanathan
2012-04-26ENGR00180185: MX6-Add support for low power audio playbackRanjani Vaidyanathan
2012-04-20ENGR00180412 MX6 SATA: Enable PHY in the SATA initilizationRichard Zhu
2012-04-19ENGR00180230 MX6 PCIE: enlarge the eye diagram and force to GEN1Richard Zhu
2012-04-19ENGR00180096 change NAND clock source to pll2_pfd_400MAllen Xu
2012-04-17ENGR00179804 change NAND clock source from pll2_pfd_352M to pll2_pfd_400MAllen Xu
2012-04-17ENGR00179685 MX6 clock:Cleanup LDB DI parent clockLiu Ying
2012-04-16ENGR00179747: MX6DL-Fix boot failureRanjani Vaidyanathan
2012-04-16ENGR00179647 MX6 clock:Correct LDB DI pclk for MX6Q TO1.1Liu Ying
2012-04-13ENGR00179574: MX6- Add bus frequency scaling supportRanjani Vaidyanathan
2012-04-13ENGR00179582 MX6: Bypass PLL1 during WAITRanjani Vaidyanathan
2012-04-13ENGR00179631 MX6 SabreSD: Add MIPI DSI Display supportWayne Zou
2012-04-13ENGR00179628-2 MX6: add ssi info in sdmaGary Zhang
2012-04-13ENGR00179621 MX6 PCIE: bring up PCIE on i.MX6 SD boardRichard Zhu
2012-04-13ENGR00179498-2 SDMA: fix p2p sdma script errorChen Liangjun
2012-04-12ENGR00179284-2 support ONFI NAND device on mx6q_arm2_pop boardAllen Xu
2012-04-12ENGR00179497-2 MX6Q SabreSD: fix SPI nor flash pin configRobin Gong
2012-04-11ENGR00177241-1 mx6 close APBH DMA clock when no I/O operationAllen Xu
2012-04-10ENGR00179129 Board support for I2C AMFM module for IMX6Q and IMX6DLAlejandro Sierra
2012-04-09ENGR00179135: workaroud for hung in flush_cache_user_range()Huang Shijie
2012-04-06ENGR00178875-1 VDOA: Add vdoa support on i.MX6 SOC platformWayne Zou
2012-04-06ENGR00177235-2 SDMA: add p2p dma modeChen Liangjun
2012-04-06ARM: assembler.h: Add string declaration macroDave Martin
2012-04-06ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflictsCatalin Marinas
2012-04-06ENGR00178939 [mx6] usb host, msleep may be called in atomic contextTony LIU
2012-04-05ENGR00178915: imx6 clock fix build warningsAdrian Alonso
2012-04-05ENGR00178951-2 SYSRQ: enable CONFIG_MAGIC_SYSRQ by defaultJason Liu
2012-04-05ENGR00177581-4 MX6: add wm8962 mic supportGary Zhang
2012-04-05ENGR00160472 - MX6: add Ethernet ANSI/IEEE 802.2 LLC support in defconfig.Fugang Duan
2012-04-05ENGR00178646-2 [MX6]Add SD1 and SD2 to interactive governorAnson Huang
2012-04-04ENGR00175724-1 IPU: change ipu_device thread process mode to interrupt mode.Wayne Zou
2012-04-02ENGR00178763: MX6-Fix TO1.0 boot-fail issueRanjani Vaidyanathan
2012-04-02ENGR00178584 uart3 pins configurationAlejandro Sierra
2012-04-01ENGR00178629 i.MX6 sabresd:support software power off by SNVS settingRobin Gong
2012-03-30ENGR00178582 Remove uart2 early parameterAlejandro Sierra
2012-03-30ENGR00178581 - EPDC fb: Fix regulator-related EPDC failure on SabreSDDanny Nold
2012-03-30ENGR00176366: MX6-Switch ARM_CLK to PLL2_400MHz when ARM freq is below 400MHz.Ranjani Vaidyanathan
2012-03-30ENGR00178552 MX6XX_SABRESD: update pin mux for revB board.Zhang Jiejing
2012-03-30ENGR00178505 [MX6]Enable performance and ondemand governorAnson Huang
2012-03-30ENGR00177932 - i.MX6 sabresd : Recorrect fec phy AR8031 rework.Fugang Duan
2012-03-29ENGR00178458 - WM8962 regulator constraint fix to prevent unwanted disableDanny Nold
2012-03-30ENGR00178128 mx6 pcie: pass PCIEX1 CT network card verificationsRichard Zhu
2012-03-28ENGR00178106 SabreSD: scan emmc slot sd4 firstly for mfgtoolsFrank Li
2012-03-28ENGR00177875 mx6: pm: disable USB VBUS wakeup to avoid vbus wake systemPeter Chen
2012-03-28ENGR00177771 usb: usb wakeup enable should include both controller and phyPeter Chen
2012-03-27ENGR00178118-2 fix some build warnings when using GCC 4.6.2Jason Liu