summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2019-03-28ARM: dts: colibri_imx6: fix mcp2515 labelsMarcel Ziswiler
2019-03-20imx6qdl-colibri.dtsi: UHS-I support for v1.1a hwIgor Opaniuk
2019-03-12ARM: dts: Add sleep state to the sd-card pinsPhilippe Schenker
2019-03-12ARM: dts: Add Apalis iMX6 Ixora v1.2Philippe Schenker
2019-03-11ARM: dts: imx6: Add sleep state to can interfacesPhilippe Schenker
2019-02-19ARM: dts: imx6qdl-colibri: add phy to fecPhilippe Schenker
2019-01-29apalis/colibri imx6/7/ull: defconfig: Add nf_filterPhilippe Schenker
2019-01-17ARM: dts: imx6ull: let PHY clock muxed as clock during sleepPhilippe Schenker
2019-01-17ARM: dts: imx6ull: Add phy-supply to fecPhilippe Schenker
2019-01-10imx6ull: usdhc1: Add sleep state to cd-pinPhilippe Schenker
2018-12-27ARM: dts: imx6: add missing uart transceiver enable pinmuxPhilippe Schenker
2018-12-27ARM: dts: imx6ull: improve can templatesMax Krummenacher
2018-12-27ARM: dts: imx6ull: add sleep mode to fecPhilippe Schenker
2018-12-27colibri_imx7: make sure module supplies are always onMarcel Ziswiler
2018-12-24arm: dts: apalis imx6/colibri imx6ull/imx7: fix input includeMarcel Ziswiler
2018-12-24colibri-imx7: defconfig: enable psci supportMarcel Ziswiler
2018-12-24apalis/colibri_imx6_defconfig: re-order kernel configurationsMarcel Ziswiler
2018-12-24arm: imx: fix handling power stuff without psciMarcel Ziswiler
2018-12-24ARM: dts: imx6ull: fix pwm clockMax Krummenacher
2018-12-24ARM: dts: imx6ull: include all needed definitionsMax Krummenacher
2018-12-24ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher
2018-12-24ARM: dts: imx7-colibri: disable HS400Stefan Agner
2018-12-24ARM: dts: imx6: remove 1.8V regulatorStefan Agner
2018-12-24ARM: dts: imx6ull-colibri-aster: Add support for Aster with Colibri iMX6ULLMax Krummenacher
2018-12-24ARM: dts: imx7-colibri: unify settings for FlexCANMax Krummenacher
2018-12-24imx6ull-colibri.dtsi: change touch i2c parametersMax Krummenacher
2018-12-24imx6qdl-apalis.dtsi: card detect pins: use pull up and hysteresisMax Krummenacher
2018-12-24arm: dts: correct VDDA in SGTL5000 for imx6 modules.Gerard Salvatella
2018-12-24ARM: dts: Coibri iMX6ULL: use wdog HW signal for resetMax Krummenacher
2018-12-24ARM: dts: imx6: mux SD/MMC CD and SPI CS explicitlyStefan Agner
2018-12-24colibri-imx7: defconfig: enable sound simple card driverMax Krummenacher
2018-12-24dts: imx: colibri eval/iris: change pins to capacitive touch adapterMax Krummenacher
2018-12-24dts: imx: fix M41T0 RTC compatible stringGerard Salvatella
2018-12-24dts: add can-spi controllerGerard Salvatella
2018-12-24dts: update/add atmel mxtGerard Salvatella
2018-12-24dts: enable hdmi also on asterGerard Salvatella
2018-12-24dts: synchronize snvs node pathGerard Salvatella
2018-12-24ARM: dts: imx7-colibri: prepare module device tree for FlexCANStefan Agner
2018-12-24ARM: dts: imx6qdl: Fix SPDIF regressionFabio Estevam
2018-12-24arm: imx: gpc: do not poweroff M/F mix in suspendMax Krummenacher
2018-12-24ARM: dts: imx: fix PCI bus dtc warningsRob Herring
2018-12-24ARM: dts: imx6: add required RS-485 propertiesStefan Agner
2018-12-24ARM: dts: imx6ull-colibri-eval-v3: remove duplicate nodesStefan Agner
2018-12-24arm: dts: apalis imx6: fix mipi-csi2 gpio assignmentMax Krummenacher
2018-12-24arm: dts: apalis imx6: add timings for new 10 inch lvdsMax Krummenacher
2018-12-24arm: dts: apalis imx6: add reset controller for atmel mxt multitouchMax Krummenacher
2018-12-24ARM: imx: mach-imx7d: configure clock source per FEC instanceStefan Agner
2018-12-24ARM: imx: mach-imx7d: put external ethernet clock in error caseStefan Agner
2018-12-24ARM: dts: imx7: add alias for Ethernet controllersStefan Agner
2018-12-24ARM: dts: imx7-colibri: Specify cable detect as ID and VBUS pinMax Krummenacher
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 00:56:27 +0000