summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2018-02-03KVM: VMX: Fix rflags cache during vCPU resetWanpeng Li
[ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ] Reported by syzkaller: *** Guest State *** CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1 CR3 = 0x000000002081e000 RSP = 0x000000000000fffa RIP = 0x0000000000000000 RFLAGS=0x00023000 DR7 = 0x00000000000000 ^^^^^^^^^^ ------------[ cut here ]------------ WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] RSP: 0018:ffff880291d179e0 EFLAGS: 00010202 Call Trace: kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The failed vmentry is triggered by the following beautified testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_guest_debug debug = { .control = 0xf0403, .arch = { .debugreg[6] = 0x2, .debugreg[7] = 0x2 } }; ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug); ioctl(r[4], KVM_RUN, 0); } which testcase tries to setup the processor specific debug registers and configure vCPU for handling guest debug events through KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set rflags in order to set TF bit if single step is needed. All regs' caches are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU reset. However, the cache of rflags is not reset during vCPU reset. The function vmx_get_rflags() returns an unreset rflags cache value since the cache is marked avail, it is 0 after boot. Vmentry fails if the rflags reserved bit 1 is 0. This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and its cache to 0x2 during vCPU reset. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: X86: Fix softlockup when get the current kvmclockWanpeng Li
[ Upstream commit e70b57a6ce4e8b92a56a615ae79bdb2bd66035e7 ] watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [qemu-system-x86:10185] CPU: 6 PID: 10185 Comm: qemu-system-x86 Tainted: G OE 4.14.0-rc4+ #4 RIP: 0010:kvm_get_time_scale+0x4e/0xa0 [kvm] Call Trace: get_time_ref_counter+0x5a/0x80 [kvm] kvm_hv_process_stimers+0x120/0x5f0 [kvm] kvm_arch_vcpu_ioctl_run+0x4b4/0x1690 [kvm] kvm_vcpu_ioctl+0x33a/0x620 [kvm] do_vfs_ioctl+0xa1/0x5d0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1e/0xa9 This can be reproduced when running kvm-unit-tests/hyperv_stimer.flat and cpu-hotplug stress simultaneously. __this_cpu_read(cpu_tsc_khz) returns 0 (set in kvmclock_cpu_down_prep()) when the pCPU is unhotplug which results in kvm_get_time_scale() gets into an infinite loop. This patch fixes it by treating the unhotplug pCPU as not using master clock. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Preserve read-only values in the redirection tableNikita Leshenko
[ Upstream commit b200dded0a6974a3b69599832b2203483920ab25 ] According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb ("ioapic: keep RO bits for IOAPIC entry"). Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggeredNikita Leshenko
[ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ] Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for IOAPICs without an EOI register. They simulate the EOI message manually by changing the trigger mode to edge and then back to level, with the entry being masked during this. QEMU implements this feature in commit ed1263c363c9 ("ioapic: clear remote irr bit for edge-triggered interrupts") As a side effect, this commit removes an incorrect behavior where Remote IRR was cleared when the redirection table entry was rewritten. This is not consistent with the manual and also opens an opportunity for a strange behavior when a redirection table entry is modified from an interrupt handler that handles the same entry: The modification will clear the Remote IRR bit even though the interrupt handler is still running. Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure raceNikita Leshenko
[ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ] KVM uses ioapic_handled_vectors to track vectors that need to notify the IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending or running and ioapic_handled_vectors only remembers the newest configuration; thus EOI from the old interrupt is not delievered to the IOAPIC. A previous commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") addressed this issue by adding pending edge-triggered interrupts to ioapic_handled_vectors, fixing this race for edge-triggered interrupts. The commit explicitly ignored level-triggered interrupts, but this race applies to them as well: 1) IOAPIC sends a level triggered interrupt vector to VCPU0 2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC to route the vector to VCPU1. The reconfiguration rewrites only the upper 32 bits of the IOREDTBLn register. (Causes KVM to update ioapic_handled_vectors for VCPU0 and it no longer includes the vector.) 3) VCPU0 sends EOI for the vector, but it's not delievered to the IOAPIC because the ioapic_handled_vectors doesn't include the vector. 4) New interrupts are not delievered to VCPU1 because remote_irr bit is set forever. Therefore, the correct behavior is to add all pending and running interrupts to ioapic_handled_vectors. This commit introduces a slight performance hit similar to commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") for the rare case that the vector is reused by a non-IOAPIC source on VCPU0. We prefer to keep solution simple and not handle this case just as the original commit does. Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: X86: Fix operand/address-size during instruction decodingWanpeng Li
[ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ] Pedro reported: During tests that we conducted on KVM, we noticed that executing a "PUSH %ES" instruction under KVM produces different results on both memory and the SP register depending on whether EPT support is enabled. With EPT the SP is reduced by 4 bytes (and the written value is 0-padded) but without EPT support it is only reduced by 2 bytes. The difference can be observed when the CS.DB field is 1 (32-bit) but not when it's 0 (16-bit). The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D also should be respected instead of just default operand/address-size/66H prefix/67H prefix during instruction decoding. This patch fixes it by also adjusting operand/address-size according to CS.D. Reported-by: Pedro Fonseca <pfonseca@cs.washington.edu> Tested-by: Pedro Fonseca <pfonseca@cs.washington.edu> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pedro Fonseca <pfonseca@cs.washington.edu> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: Don't re-execute instruction when not passing CR2 valueLiran Alon
[ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ] In case of instruction-decode failure or emulation failure, x86_emulate_instruction() will call reexecute_instruction() which will attempt to use the cr2 value passed to x86_emulate_instruction(). However, when x86_emulate_instruction() is called from emulate_instruction(), cr2 is not passed (passed as 0) and therefore it doesn't make sense to execute reexecute_instruction() logic at all. Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failureLiran Alon
[ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ] On this case, handle_emulation_failure() fills kvm_run with internal-error information which it expects to be delivered to user-mode for further processing. However, the code reports a wrong return-value which makes KVM to never return to user-mode on this scenario. Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to userspace") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03crypto: aesni - handle zero length dst bufferStephan Mueller
commit 9c674e1e2f9e24fa4392167efe343749008338e0 upstream. GCM can be invoked with a zero destination buffer. This is possible if the AAD and the ciphertext have zero lengths and only the tag exists in the source buffer (i.e. a source buffer cannot be zero). In this case, the GCM cipher only performs the authentication and no decryption operation. When the destination buffer has zero length, it is possible that no page is mapped to the SG pointing to the destination. In this case, sg_page(req->dst) is an invalid access. Therefore, page accesses should only be allowed if the req->dst->length is non-zero which is the indicator that a page must exist. This fixes a crash that can be triggered by user space via AF_ALG. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31bpf: fix bpf_tail_call() x64 JITAlexei Starovoitov
[ upstream commit 90caccdd8cc0215705f18b92771b449b01e2474a ] - bpf prog_array just like all other types of bpf array accepts 32-bit index. Clarify that in the comment. - fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes - tighten corresponding check in the interpreter to stay consistent The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and though JIT code is wrong it will check bounds correctly. Hence two fixes tags. All other JITs don't have this problem. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation") Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31x86: bpf_jit: small optimization in emit_bpf_tail_call()Eric Dumazet
[ upstream commit 84ccac6e7854ebbfb56d2fc6d5bef9be49bb304c ] Saves 4 bytes replacing following instructions : lea rax, [rsi + rdx * 8 + offsetof(...)] mov rax, qword ptr [rax] cmp rax, 0 by : mov rax, [rsi + rdx * 8 + offsetof(...)] test rax, rax Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31x86/microcode/intel: Extend BDW late-loading further with LLC size checkJia Zhang
commit 7e702d17ed138cf4ae7c00e8c00681ed464587c7 upstream. Commit b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31perf/x86/amd/power: Do not load AMD power module on !AMD platformsXiao Liang
commit 40d4071ce2d20840d224b4a77b5dc6f752c9ab15 upstream. The AMD power module can be loaded on non AMD platforms, but unload fails with the following Oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: __list_del_entry_valid+0x29/0x90 Call Trace: perf_pmu_unregister+0x25/0xf0 amd_power_pmu_exit+0x1c/0xd23 [power] SyS_delete_module+0x1a8/0x2b0 ? exit_to_usermode_loop+0x8f/0xb0 entry_SYSCALL_64_fastpath+0x20/0x83 Return -ENODEV instead of 0 from the module init function if the CPU does not match. Fixes: c7ab62bfbe0e ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism") Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20180122061252.6394-1-xiliang@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31vsyscall: Fix permissions for emulate mode with KAISER/PTIBen Hutchings
The backport of KAISER to 4.4 turned vsyscall emulate mode into native mode. Add a vsyscall_pgprot variable to hold the correct page protections, like Borislav and Hugh did for 3.2 and 3.18. Cc: Borislav Petkov <bp@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31um: link vmlinux with -no-pieThomas Meyer
commit 883354afbc109c57f925ccc19840055193da0cc0 upstream. Debian's gcc defaults to pie. The global Makefile already defines the -fno-pie option. Link UML dynamic kernel image also with -no-pie to fix the build. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Bernie Innocenti <codewiz@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31drivers: base: cacheinfo: fix x86 with CONFIG_OF enabledSudeep Holla
commit fac51482577d5e05bbb0efa8d602a3c2111098bf upstream. With CONFIG_OF enabled on x86, we get the following error on boot: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " and the cacheinfo fails to get populated in the corresponding sysfs entries. This is because cache_setup_of_node looks for of_node for setting up the shared cpu_map without checking that it's already populated in the architecture specific callback. In order to indicate that the shared cpu_map is already populated, this patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo that can be used by the generic code to skip cache_shared_cpu_map_setup. This patch also sets that boolean for x86. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31Prevent timer value 0 for MWAITXJanakarajan Natarajan
commit 88d879d29f9cc0de2d930b584285638cdada6625 upstream. Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2Punit Agrawal
commit c507babf10ead4d5c8cca704539b170752a8ac84 upstream. KVM only supports PMD hugepages at stage 2 but doesn't actually check that the provided hugepage memory pagesize is PMD_SIZE before populating stage 2 entries. In cases where the backing hugepage size is smaller than PMD_SIZE (such as when using contiguous hugepages), KVM can end up creating stage 2 mappings that extend beyond the supplied memory. Fix this by checking for the pagesize of userspace vma before creating PMD hugepage at stage 2. Fixes: 66b3923a1a0f77a ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernelsAndy Lutomirski
commit 1c52d859cb2d417e7216d3e56bb7fea88444cec9 upstream. We support various non-Intel CPUs that don't have the CPUID instruction, so the M486 test was wrong. For now, fix it with a big hammer: handle missing CPUID on all 32-bit CPUs. Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel <Xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Zhang, Ning A" <ning.a.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23MIPS: AR7: ensure the port type's FCR value is usedJonas Gorski
commit 0a5191efe06b5103909206e4fbcff81d30283f8e upstream. Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/retpoline: Optimize inline assembler for vmexit_fill_RSBAndi Kleen
commit 3f7d875566d8e79c5e0b2c9a413e91b2c29e0854 upstream. The generated assembler for the C fill RSB inline asm operations has several issues: - The C code sets up the loop register, which is then immediately overwritten in __FILL_RETURN_BUFFER with the same value again. - The C code also passes in the iteration count in another register, which is not used at all. Remove these two unnecessary operations. Just rely on the single constant passed to the macro for the iterations. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: dave.hansen@intel.com Cc: gregkh@linuxfoundation.org Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23kprobes/x86: Disable optimizing on the function jumps to indirect thunkMasami Hiramatsu
commit c86a32c09f8ced67971a2310e3b0dda4d1749007 upstream. Since indirect jump instructions will be replaced by jump to __x86_indirect_thunk_*, those jmp instruction must be treated as an indirect jump. Since optprobe prohibits to optimize probes in the function which uses an indirect jump, it also needs to find out the function which jump to __x86_indirect_thunk_* and disable optimization. Add a check that the jump target address is between the __indirect_thunk_start/end when optimizing kprobe. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23kprobes/x86: Blacklist indirect thunk functions for kprobesMasami Hiramatsu
commit c1804a236894ecc942da7dc6c5abe209e56cba93 upstream. Mark __x86_indirect_thunk_* functions as blacklist for kprobes because those functions can be called from anywhere in the kernel including blacklist functions of kprobes. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629209111.10241.5444852823378068683.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23retpoline: Introduce start/end markers of indirect thunkMasami Hiramatsu
commit 736e80a4213e9bbce40a7c050337047128b472ac upstream. Introduce start/end markers of __x86_indirect_thunk_* functions. To make it easy, consolidate .text.__x86.indirect_thunk.* sections to one .text.__x86.indirect_thunk section and put it in the end of kernel text section and adds __indirect_thunk_start/end so that other subsystem (e.g. kprobes) can identify it. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629206178.10241.6828804696410044771.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/mce: Make machine check speculation protectedThomas Gleixner
commit 6f41c34d69eb005e7848716bbcafc979b35037d5 upstream. The machine check idtentry uses an indirect branch directly from the low level code. This evades the speculation protection. Replace it by a direct call into C code and issue the indirect call there so the compiler can apply the proper speculation protection. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by:Borislav Petkov <bp@alien8.de> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Niced-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801181626290.1847@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/cpu, x86/pti: Do not enable PTI on AMD processorsTom Lendacky
commit 694d99d40972f12e59a3696effee8a376b79d7c8 upstream. AMD processors are not subject to the types of attacks that the kernel page table isolation feature protects against. The AMD microarchitecture does not allow memory references, including speculative references, that access higher privileged data when running in a lesser privileged mode when that access would result in a page fault. Disable page table isolation by default on AMD processors by not setting the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI is set. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net Cc: Nick Lowe <nick.lowe@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC callsMarc Zyngier
commit acfb3b883f6d6a4b5d27ad7fdded11f6a09ae6dd upstream. KVM doesn't follow the SMCCC when it comes to unimplemented calls, and inject an UNDEF instead of returning an error. Since firmware calls are now used for security mitigation, they are becoming more common, and the undef is counter productive. Instead, let's follow the SMCCC which states that -1 must be returned to the caller when getting an unknown function number. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7Thomas Petazzoni
commit 56aeb07c914a616ab84357d34f8414a69b140cdf upstream. MPP7 is currently muxed as "gpio", but this function doesn't exist for MPP7, only "gpo" is available. This causes the following error: kirkwood-pinctrl f1010000.pin-controller: unsupported function gpio on pin mpp7 pinctrl core: failed to register map default (6): invalid type given kirkwood-pinctrl f1010000.pin-controller: error claiming hogs: -22 kirkwood-pinctrl f1010000.pin-controller: could not claim hogs: -22 kirkwood-pinctrl f1010000.pin-controller: unable to register pinctrl driver kirkwood-pinctrl: probe of f1010000.pin-controller failed with error -22 So the pinctrl driver is not probed, all device drivers (including the UART driver) do a -EPROBE_DEFER, and therefore the system doesn't really boot (well, it boots, but with no UART, and no devices that require pin-muxing). Back when the Device Tree file for this board was introduced, the definition was already wrong. The pinctrl driver also always described as "gpo" this function for MPP7. However, between Linux 4.10 and 4.11, a hog pin failing to be muxed was turned from a simple warning to a hard error that caused the entire pinctrl driver probe to bail out. This is probably the result of commit 6118714275f0a ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()"). This commit fixes the Device Tree to use the proper "gpo" function for MPP7, which fixes the boot of OpenBlocks A7, which was broken since Linux 4.11. Fixes: f24b56cbcd9d ("ARM: kirkwood: add support for OpenBlocks A7 platform") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23ARM: sunxi_defconfig: Enable CMAMaxime Ripard
commit c13e7f313da33d1488355440f1a10feb1897480a upstream. The DRM driver most notably, but also out of tree drivers (for now) like the VPU or GPU drivers, are quite big consumers of large, contiguous memory buffers. However, the sunxi_defconfig doesn't enable CMA in order to mitigate that, which makes them almost unusable. Enable it to make sure it somewhat works. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/apic/vector: Fix off by one in error pathThomas Gleixner
commit 45d55e7bac4028af93f5fa324e69958a0b868e96 upstream. Keith reported the following warning: WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120 x86_vector_free_irqs+0xa1/0x180 x86_vector_alloc_irqs+0x1e4/0x3a0 msi_domain_alloc+0x62/0x130 The reason for this is that if the vector allocation fails the error handling code tries to free the failed vector as well, which causes the above imbalance warning to trigger. Adjust the error path to handle this correctly. Fixes: b5dc8e6c21e7 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors") Reported-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/tsc: Fix erroneous TSC rate on Skylake XeonLen Brown
commit b511203093489eb1829cb4de86e8214752205ac6 upstream. The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is problematic: - SKX workstations (with same model # as server variants) use a 24 MHz crystal. This results in a -4.0% time drift rate on SKX workstations. - SKX servers subject the crystal to an EMI reduction circuit that reduces its actual frequency by (approximately) -0.25%. This results in -1 second per 10 minute time drift as compared to network time. This issue can also trigger a timer and power problem, on configurations that use the LAPIC timer (versus the TSC deadline timer). Clock ticks scheduled with the LAPIC timer arrive a few usec before the time they are expected (according to the slow TSC). This causes Linux to poll-idle, when it should be in an idle power saving state. The idle and clock code do not graciously recover from this error, sometimes resulting in significant polling and measurable power impact. Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X. native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz, and the TSC refined calibration will update tsc_khz to correct for the difference. [ tglx: Sanitized change log ] Fixes: 6baf3d61821f ("x86/tsc: Add additional Intel CPU models to the crystal quirk list") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/mm/pkeys: Fix fill_sig_info_pkeyEric W. Biederman
commit beacd6f7ed5e2915959442245b3b2480c2e37490 upstream. SEGV_PKUERR is a signal specific si_code which happens to have the same numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF, TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe to just test the si_code the signal number must also be tested to prevent a false positive in fill_sig_info_pkey. This error was by inspection, and BUS_MCEERR_AR appears to be a real candidate for confusion. So pass in si_signo and check for SIG_SEGV to verify that it is actually a SEGV_PKUERR Fixes: 019132ff3daf ("x86/mm/pkeys: Fill in pkey field in siginfo") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20180112203135.4669-2-ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/cpufeature: Move processor tracing out of scattered featuresPaolo Bonzini
commit 4fdec2034b7540dda461c6ba33325dfcff345c64 upstream. Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX), so do not duplicate it in the scattered features word. Besides being more tidy, this will be useful for KVM when it presents processor tracing to the guests. KVM selects host features that are supported by both the host kernel (depending on command line options, CPU errata, or whatever) and KVM. Whenever a full feature word exists, KVM's code is written in the expectation that the CPUID bit number matches the X86_FEATURE_* bit number, but this is not the case for X86_FEATURE_INTEL_PT. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luwei Kang <luwei.kang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macrosTom Lendacky
commit 28d437d550e1e39f805d99f9f8ac399c778827b7 upstream. The PAUSE instruction is currently used in the retpoline and RSB filling macros as a speculation trap. The use of PAUSE was originally suggested because it showed a very, very small difference in the amount of cycles/time used to execute the retpoline as compared to LFENCE. On AMD, the PAUSE instruction is not a serializing instruction, so the pause/jmp loop will use excess power as it is speculated over waiting for return to mispredict to the correct target. The RSB filling macro is applicable to AMD, and, if software is unable to verify that LFENCE is serializing on AMD (possible when running under a hypervisor), the generic retpoline support will be used and, so, is also applicable to AMD. Keep the current usage of PAUSE for Intel, but add an LFENCE instruction to the speculation trap for AMD. The same sequence has been adopted by GCC for the GCC generated retpolines. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Kees Cook <keescook@google.com> Link: https://lkml.kernel.org/r/20180113232730.31060.36287.stgit@tlendack-t1.amdoffice.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23x86/retpoline: Fill RSB on context switch for affected CPUsDavid Woodhouse
commit c995efd5a740d9cbafbf58bde4973e8b50b4d761 upstream. On context switch from a shallow call stack to a deeper one, as the CPU does 'ret' up the deeper side it may encounter RSB entries (predictions for where the 'ret' goes to) which were populated in userspace. This is problematic if neither SMEP nor KPTI (the latter of which marks userspace pages as NX for the kernel) are active, as malicious code in userspace may then be executed speculatively. Overwrite the CPU's return prediction stack with calls which are predicted to return to an infinite loop, to "capture" speculation if this happens. This is required both for retpoline, and also in conjunction with IBRS for !SMEP && !KPTI. On Skylake+ the problem is slightly different, and an *underflow* of the RSB may cause errant branch predictions to occur. So there it's not so much overwrite, as *filling* the RSB to attempt to prevent it getting empty. This is only a partial solution for Skylake+ since there are many other conditions which may result in the RSB becoming empty. The full solution on Skylake+ is to use IBRS, which will prevent the problem even when the RSB becomes empty. With IBRS, the RSB-stuffing will not be required on context switch. [ tglx: Added missing vendor check and slighty massaged comments and changelog ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515779365-9032-1-git-send-email-dwmw@amazon.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/pti/efi: broken conversion from efi to kernel page tablePavel Tatashin
The page table order must be increased for EFI table in order to avoid a bug where NMI tries to change the page table to kernel page table, while efi page table is active. For more disccussion about this bug, see this thread: http://lkml.iu.edu/hypermail/linux/kernel/1801.1/00951.html Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline: Remove compile time warningThomas Gleixner
commit b8b9ce4b5aec8de9e23cabb0a26b78641f9ab1d6 upstream. Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler does not have retpoline support. Linus rationale for this is: It's wrong because it will just make people turn off RETPOLINE, and the asm updates - and return stack clearing - that are independent of the compiler are likely the most important parts because they are likely the ones easiest to target. And it's annoying because most people won't be able to do anything about it. The number of people building their own compiler? Very small. So if their distro hasn't got a compiler yet (and pretty much nobody does), the warning is just annoying crap. It is already properly reported as part of the sysfs interface. The compile-time warning only encourages bad things. Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support") Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline: Fill return stack buffer on vmexitDavid Woodhouse
commit 117cc7a908c83697b0b737d15ae1eb5943afe35b upstream. In accordance with the Intel and AMD documentation, we need to overwrite all entries in the RSB on exiting a guest, to prevent malicious branch target predictions from affecting the host kernel. This is needed both for retpoline and for IBRS. [ak: numbers again for the RSB stuffing labels] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515755487-8524-1-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/irq32: Convert assembler indirect jumpsAndi Kleen
commit 7614e913db1f40fff819b36216484dc3808995d4 upstream. Convert all indirect jumps in 32bit irq inline asm code to use non speculative sequences. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-12-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/checksum32: Convert assembler indirect jumpsDavid Woodhouse
commit 5096732f6f695001fa2d6f1335a2680b37912c69 upstream. Convert all indirect jumps in 32bit checksum assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-11-git-send-email-dwmw@amazon.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/xen: Convert Xen hypercall indirect jumpsDavid Woodhouse
commit ea08816d5b185ab3d09e95e393f265af54560350 upstream. Convert indirect call in Xen hypercall to use non-speculative sequence, when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-10-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/ftrace: Convert ftrace assembler indirect jumpsDavid Woodhouse
commit 9351803bd803cdbeb9b5a7850b7b6f464806e3db upstream. Convert all indirect jumps in ftrace assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-8-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/entry: Convert entry assembler indirect jumpsDavid Woodhouse
commit 2641f08bb7fc63a636a2b18173221d7040a3512e upstream. Convert indirect jumps in core 32/64bit entry assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Don't use CALL_NOSPEC in entry_SYSCALL_64_fastpath because the return address after the 'call' instruction must be *precisely* at the .Lentry_SYSCALL_64_after_fastpath label for stub_ptregs_64 to work, and the use of alternatives will mess that up unless we play horrid games to prepend with NOPs and make the variants the same length. It's not worth it; in the case where we ALTERNATIVE out the retpoline, the first instruction at __x86.indirect_thunk.rax is going to be a bare jmp *%rax anyway. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-7-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline/crypto: Convert crypto assembler indirect jumpsDavid Woodhouse
commit 9697fa39efd3fc3692f2949d4045f393ec58450b upstream. Convert all indirect jumps in crypto assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/spectre: Add boot time option to select Spectre v2 mitigationDavid Woodhouse
commit da285121560e769cc31797bba6422eea71d473e0 upstream. Add a spectre_v2= option to select the mitigation used for the indirect branch speculation vulnerability. Currently, the only option available is retpoline, in its various forms. This will be expanded to cover the new IBRS/IBPB microcode features. The RETPOLINE_AMD feature relies on a serializing LFENCE for speculation control. For AMD hardware, only set RETPOLINE_AMD if LFENCE is a serializing instruction, which is indicated by the LFENCE_RDTSC feature. [ tglx: Folded back the LFENCE/AMD fixes and reworked it so IBRS integration becomes simple ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-5-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline: Add initial retpoline supportDavid Woodhouse
commit 76b043848fd22dbf7f8bf3a1452f8c70d557b860 upstream. Enable the use of -mindirect-branch=thunk-extern in newer GCC, and provide the corresponding thunks. Provide assembler macros for invoking the thunks in the same way that GCC does, from native and inline assembler. This adds X86_FEATURE_RETPOLINE and sets it by default on all CPUs. In some circumstances, IBRS microcode features may be used instead, and the retpoline can be disabled. On AMD CPUs if lfence is serialising, the retpoline can be dramatically simplified to a simple "lfence; jmp *\reg". A future patch, after it has been verified that lfence really is serialising in all circumstances, can enable this by setting the X86_FEATURE_RETPOLINE_AMD feature bit in addition to X86_FEATURE_RETPOLINE. Do not align the retpoline in the altinstr section, because there is no guarantee that it stays aligned when it's copied over the oldinstr during alternative patching. [ Andi Kleen: Rename the macros, add CONFIG_RETPOLINE option, export thunks] [ tglx: Put actual function CALL/JMP in front of the macros, convert to symbolic labels ] [ dwmw2: Convert back to numeric labels, merge objtool fixes ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-4-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/asm: Use register variable to get stack pointer valueAndrey Ryabinin
commit 196bd485ee4f03ce4c690bfcf38138abfcd0a4bc upstream. Currently we use current_stack_pointer() function to get the value of the stack pointer register. Since commit: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") ... we have a stack register variable declared. It can be used instead of current_stack_pointer() function which allows to optimize away some excessive "mov %rsp, %<dst>" instructions: -mov %rsp,%rdx -sub %rdx,%rax -cmp $0x3fff,%rax -ja ffffffff810722fd <ist_begin_non_atomic+0x2d> +sub %rsp,%rax +cmp $0x3fff,%rax +ja ffffffff810722fa <ist_begin_non_atomic+0x2a> Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer and use it instead of the removed function. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929141537.29167-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [dwmw2: We want ASM_CALL_CONSTRAINT for retpoline] Signed-off-by: David Woodhouse <dwmw@amazon.co.ku> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlierAndy Lutomirski
commit b8b7abaed7a49b350f8ba659ddc264b04931d581 upstream. Otherwise we might have the PCID feature bit set during cpu_init(). This is just for robustness. I haven't seen any actual bugs here. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels") Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asmDavid Woodhouse
commit b9e705ef7cfaf22db0daab91ad3cd33b0fa32eb9 upstream. Where an ALTERNATIVE is used in the middle of an inline asm block, this would otherwise lead to the following instruction being appended directly to the trailing ".popsection", and a failed compile. Fixes: 9cebed423c84 ("x86, alternative: Use .pushsection/.popsection") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: ak@linux.intel.com Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180104143710.8961-8-dwmw@amazon.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/alternatives: Fix optimize_nops() checkingBorislav Petkov
commit 612e8e9350fd19cae6900cf36ea0c6892d1a0dca upstream. The alternatives code checks only the first byte whether it is a NOP, but with NOPs in front of the payload and having actual instructions after it breaks the "optimized' test. Make sure to scan all bytes before deciding to optimize the NOPs in there. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/20180110112815.mgciyf5acwacphkq@pd.tnic Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-02 19:29:13 +0000