summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-10-12ENGR00220370 [MX6]Fix BUS freq suspend/resume fail in low bus modeAnson Huang
2012-10-12ENGR00218789 mx6: clock: keep PLL3 enable and power bit all the timemake shi
2012-10-12ENGR00220818 [MX6SL] - Ensure the Enable bit is set for all the PLLs.Ranjani Vaidyanathan
2012-10-12ENGR00217687 [MX6SL_ARM2/EVK] Fix no perfmon directoryEric Sun
2012-10-12ENGR00220567 [MX6 SABRELite] No mxs-perfmon.0 directoryEric Sun
2012-10-12ENGR00220707 MX6Q/MX6DL: Fix build break due to MX6SL LPM codeRanjani Vaidyanathan
2012-10-12ENGR00220496 MX6SL:Add low power IDLE mode optimizations.Ranjani Vaidyanathan
2012-10-12ENGR00220027-2 mx6sl: add pad ctrl for audmux iomux settingGary Zhang
2012-10-12ENGR00220027-1 IOMUX: add api for special pad bits configurationGary Zhang
2012-10-12ENGR00220341-1 usb: add spin_lock_irqsave protect for pdata->lowpowerPeter Chen
2012-10-12ENGR00220512-2: mx6sl evk: keep NVCC_1V8 and NVCC_1.2V always onRobby Cai
2012-10-12ENGR00220512-1: mx6sl evk: change wm8962 codec 1.8V power source to VGEN3Gary Zhang
2012-10-12ENGR00220388 [MX6]Adjust SOC/PU voltage according to datasheetAnson Huang
2012-10-12ENGR00220497 [MX6Q, MX6DL]: Fix not able to set high bus freqNancy Chen
2012-10-12ENGR00219872-2 MX6Q SabreSD:Disable LVDS CABC functionLiu Ying
2012-10-12ENGR00219872-1 MX6Q Sabresd iomux:Add LVDS CABC_EN0/1 supportLiu Ying
2012-10-12ENGR00220161: imx6sl: Add EVK board SupportRobby Cai
2012-10-12ENGR00219856-2 mxc pwm: do pwm software reset after disableXinyu Chen
2012-10-12ENGR00219856-1 mx6q sabresd: add debounce to gpio keyXinyu Chen
2012-10-12ENGR00220176 sabrelite ov5642: Fix ov5642 probe failYuxi Sun
2012-10-12ENGR00220297 [MX6SL]: Fix AHB clock not correct after kernel bootNancy Chen
2012-10-12ENGR00220340 mx6sl pfuze: keep NVCC_1V8 and NVCC_1.2V always onRobin Gong
2012-10-12ENGR00220199 Add CPU governor trigger for GPU2D and GPUVG coreRichard Liu
2012-10-12ENGR00217918 - mx6 cpufreq : Add on-demand governor's threshold for FECFugang Duan
2012-10-12ENGR00220181-1 DMA: remove noncacheable memory allocation limit.Chen Liangjun
2012-10-12ENGR00220169: imx6: Fix build break when make modulesRobby Cai
2012-10-12ENGR00220154 GPT mx6: move mx6_timer_rate to clock.cRobin Gong
2012-10-12ENGR00220153 cpufreq mx6: new cpu set point and add VDDSOC/PU adjustRobin Gong
2012-10-12ENGR00220155 [MX6]Support DSM mode on DL's TO1.1Anson Huang
2012-10-12ENGR00220022 [MX6]Add necessary protection to bus freq variables and functionAnson Huang
2012-10-12ENGR00219870 [MX6]Add interrupt check to idle to minish SMP impactAnson Huang
2012-10-12ENGR00220038-1 build config: update default build configYuxi Sun
2012-10-12ENGR00219837-4 HDMI SabreAuto: Add HDMI_SDMA support for RIGEL TO1.1Chen Liangjun
2012-10-12ENGR00219837-3 HDMI SabreSD: Add HDMI_SDMA support for RIGEL TO1.1Chen Liangjun
2012-10-12ENGR00219837-2 HDMI ARM2: Add HDMI_SDMA support for RIGEL TO1.1Chen Liangjun
2012-10-12ENGR00219595 MX6Q ARM2: Add init data for P2P playbackChen Liangjun
2012-10-12ENGR00219193 improve gpu3d core clock to 528MXianzhong
2012-10-12ENGR000219304 Read the correct chip version for mx6DL and MX6SLRanjani Vaidyanathan
2012-10-12ENGR00219139: imx6 Sabreauto HDMI DDC I2C writing errorAdrian Alonso
2012-10-12ENGR00219178 [MX6]Need to avoid using GPIO_1 on latest B4 sabresd boardAnson Huang
2012-10-12ENGR00219016-4 MX6Q SabreLite: Set HDMI event as event 2 of SDMA eventChen Liangjun
2012-10-12ENGR00219016-3 MX6Q SMD: Set HDMI event as event 2 of SDMA eventChen Liangjun
2012-10-12ENGR00219016-2 MX6Q ARD: Set HDMI event as event 2 of SDMA eventChen Liangjun
2012-10-12ENGR00219016-1 MX6Q ARM2: Add chip version checking for HDMI SDMA setupChen Liangjun
2012-10-12ENGR00216855 suspend resume fail related with clock glitchRichard Liu
2012-10-12ENGR00218810-1 [Thermal]Add thermal alarm functionAnson Huang
2012-10-12ENGR00218747 - MX6Q/MX6DL: WAIT mode support for MX6QTO1.2/MX6DLTO1.1Ranjani Vaidyanathan
2012-10-12ENGR00218771 mx6 USB:USB disconnect issue verification on MX6QTO1.2/MX6DLTO1.1make shi
2012-10-12ENGR00218421-3 ESAI: init platform data for p2p playbackChen Liangjun
2012-10-12ENGR00218013-4 MX6Q ARM2: Set HDMI event as event 2 of SDMA eventChen Liangjun