index
:
linux-toradex.git
colibri
colibri_vf
tegra
tegra-next
toradex_4.1-2.0.x-imx
toradex_4.1-2.0.x-imx-next
toradex_4.14-2.0.x-imx
toradex_4.14-2.0.x-imx-next
toradex_4.14-2.0.x-imx-rebased
toradex_4.14-2.3.x-imx
toradex_4.19.y
toradex_4.19.y-rt
toradex_4.20.y
toradex_4.9-1.0.x-imx
toradex_4.9-1.0.x-imx-next
toradex_4.9-1.0.x-imx-rebased
toradex_4.9-2.3.x-imx
toradex_4.9-2.3.x-imx-next
toradex_4.9-2.3.x-imx-rebased
toradex_5.0.y
toradex_5.15-2.0.x-imx
toradex_5.15-2.1.x-imx
toradex_5.15-2.2.x-imx
toradex_5.2.y
toradex_5.3.y
toradex_5.4-2.1.x-imx
toradex_5.4-2.3.x-imx
toradex_5.4.y
toradex_6.6-2.0.x-imx
toradex_6.6-2.1.x-imx
toradex_imx6
toradex_imx_3.10.17_1.0.0_ga
toradex_imx_3.10.17_1.0.0_ga-next
toradex_imx_3.14.28_1.0.0_ga
toradex_imx_3.14.52_1.1.0_ga
toradex_imx_3.14.52_1.1.0_ga-next
toradex_imx_4.1.15_1.0.0_ga
toradex_imx_4.1.15_1.0.0_ga-next
toradex_imx_4.14.78_1.0.0_ga-bring_up
toradex_imx_4.9.123_imx8mm_ga-bring_up
toradex_imx_4.9.51_imx8_beta1-bring_up
toradex_imx_4.9.51_imx8_beta1-bring_up_ov5640
toradex_imx_4.9.51_imx8_beta2-bring_up
toradex_ti-linux-5.10.y_bringup
toradex_ti-linux-6.1.y
toradex_ti-linux-6.6.y
toradex_tk1_l4t_r21.5
toradex_tk1_l4t_r21.6
toradex_tk1_l4t_r21.7
toradex_tk1_l4t_r21.7-next
toradex_vf_3.18
toradex_vf_3.18-next
toradex_vf_4.0
toradex_vf_4.0-next
toradex_vf_4.1
toradex_vf_4.1-next
toradex_vf_4.4
toradex_vf_4.4-next
Linux kernel for Apalis and Colibri modules
Toradex
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
arch
Age
Commit message (
Expand
)
Author
2010-12-17
ENGR00137101-1 clock : keep GPMI and BCH working in the same frequency
Huang Shijie
2010-12-16
ENGR00136909: MX50: Drop DDR freq to 133Mhz when AHB is at medium setpoint.
Ranjani Vaidyanathan
2010-12-15
ENGR00136939-2: MX50: Fix suspend/resume issue on MX50 RDP
Ranjani Vaidyanathan
2010-12-15
ENGR00136990-2 MX50: Add sys interface to control ZQ calib run interval
Robby Cai
2010-12-15
ENGR00136990-1 MX50: fix system resume failure issue due to ZQ calibration
Robby Cai
2010-12-13
ENGR00136875-1 Add function pgprot_writethru()
Robby Cai
2010-12-10
ENGR00136231: Read MAC ID from the IIM fuses for SMSC911x driver
Dinh Nguyen
2010-12-10
ENGR00136190: MX50 RD1: Incorrect IOMUX settings break WVGA display
Ranjani Vaidyanathan
2010-12-10
ENGR00136219 MX28: Fix keypad can't wake up system
Frank Li
2010-12-10
ENGR00136202 MX50: Finetune DLL delay paramater for LPDDR2
Robby Cai
2010-12-10
ENGR00136195 MX28-MSL: fix AHB clock divider issue
Peter Chen
2010-12-09
ENGR00136170 MX50: Add ZQ calibration revision for TO1.1
Robby Cai
2010-12-08
ENGR00136146-1 MX53 TO2 ARD: Change VDDGP and VCC values
Nancy Chen
2010-12-08
ENGR00136097-2 mx50 rdp: add support to addon board's power key event
Xinyu Chen
2010-12-06
ENGR00136022: MXC:Fixed bugs in bus_frequency driver.
Ranjani Vaidyanathan
2010-12-06
ENGR00136004 iMX28: set NO_HZ and preempt as default config
Frank Li
2010-12-06
ENGR00134193-2 MX28: Fix FEC can't found phy after fix timer issue
Frank Li
2010-12-06
ENGR00134193-1 TIMER: Fix i.MX28 set wrong match value of timer
Frank Li
2010-12-04
ENGR00135048-2: MX50: Added support for bus-frequency scaling.
Ranjani Vaidyanathan
2010-12-04
ENGR00135048-1: Fixed bugs in common sw bus frequency scaling code.
Ranjani Vaidyanathan
2010-12-03
ENGR000135959: MX50: Relock PLL1 to 160MHz in LPAPM mode.
Ranjani Vaidyanathan
2010-12-03
ENGR00134277 MX50: turn off the ZQ calibration config
Robby Cai
2010-12-03
ENGR00133052 MX53: Fix system hang in vpu decoding with iram.
Sammy He
2010-12-03
ENGR00134041 [MX53] Add the SATA AHCI temperature monitor
Richard Zhu
2010-12-02
ENGR00133860 - MSL: EPDC data pin GPIO numbers off by 1
Danny Nold
2010-12-02
ENGR00134154-2 MSL: add sync between usb resume and usb wakeup thread for MX5x
Peter Chen
2010-12-02
ENGR00134154-1 MSL: add sync between usb resume and usb wakeup thread for mx28
Peter Chen
2010-12-01
ENGR00133828-2: MX50 EVK: Fix FEC GPIO/IOMUX settings in suspend mode.
Ranjani Vaidyanathan
2010-12-01
ENGR00133828-1: MX50 EVK: Shutting down VUSB2 in suspend causes USB failures
Ranjani Vaidyanathan
2010-12-01
ENGR00134202-1 DMA : add a macro to fill the DMA command word1
Huang Shijie
2010-12-01
ENGR00134179 mx50 rdp: set VSD regulator always on
Aisheng.Dong
2010-12-01
ENGR00133542: MX50- Enable SRPG support for TO1.1 chips
Zhou Jingyu
2010-11-30
ENGR00134077-1 Add TVE 1080P30/25/24, 1080I60/50 support for iMX53
Ran Ferderber
2010-11-30
ENGR00134043-2 PM:enable device suspend time mx3/5
Zhang Jiejing
2010-11-29
ENGR00134116 MX5 MFG: disable battery driver
Lily Zhang
2010-11-29
ENGR00132603-1 mxc_iim: Add mach support for sense and fuse function in mxc_iim
Terry Lv
2010-11-25
ENGR00134056-1 MSL: mx28 add low power mode and wakeup support for otg port
Peter Chen
2010-11-24
ENGR00133954-1 MSL: remove FB_SYNC_EXT flag
Jason Chen
2010-11-24
ENGR00133970 MX5x: Z160 GPU revision check
Jie Zhou
2010-11-24
ENGR00133918 mx50: ZQ calibration should be run only on mx50 platform
Terry Lv
2010-11-23
ENGR00133955 MX50: dma apbh incorrect ioremap size
Xinyu Chen
2010-11-23
ENGR00133909-1 MX28: add VBUS 5v regulator
Zhou Jingyu
2010-11-22
ENGR00133240 MX50 TO1 mDDR at 24 MHz in LPAPM mode
Anish Trivedi
2010-11-22
ENGR00133906-1 DMA : add dumping code for DMA
Huang Shijie
2010-11-22
ENGR00133848 imx51 MSL uart: change uart default parent to pll2
Jason Chen
2010-11-22
ENGR00133905 MX53 ARD: increase VDDGP and VCC voltages in suspend mode
Lily Zhang
2010-11-22
ENGR00133862: Mx50: Drop Vcc voltage to 1.05V in LPAPM mode
Ranjani Vaidyanathan
2010-11-22
ENGR00132712-2 Add ZQ calib in defconfig
Robby Cai
2010-11-22
ENGR00132712-1: Add ZQ calibration support
Robby Cai
2010-11-22
ENGR00133850 MX53 TO2: enable ARM SRPG
Lily Zhang
[next]