summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-03-02Merge tag 'metag-fixes-v4.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros
2015-03-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A CR4-shadow 32-bit init fix, plus two typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup() x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
2015-03-01Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
2015-03-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kprobes fixes and a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Make sparc64 arch point to sparc perf symbols: Define EM_AARCH64 for older OSes perf top: Fix SIGBUS on sparc64 perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag perf tools: Fix pthread_attr_setaffinity_np build error perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check perf bench: Fix order of arguments to memcpy_alloc_mem kprobes/x86: Check for invalid ftrace location in __recover_probed_insn() kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace
2015-02-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED defines mm: page_alloc: revert inadvertent !__GFP_FS retry behavior change kernel/sys.c: fix UNAME26 for 4.0 mm: memcontrol: use "max" instead of "infinity" in control knobs zram: use proper type to update max_used_pages drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store} nilfs2: fix potential memory overrun on inode scripts/gdb: add empty package initialization script rtc: ds1685: remove superfluous checks for out-of-range u8 values rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build error memcg: fix low limit calculation mm/nommu: fix memory leak ocfs2: update web page + git tree in documentation
2015-02-28mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED definesKirill A. Shutemov
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by <asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>. But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs tooSteven Rostedt
Commit: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") added a shadow CR4 such that reads and writes that do not modify the CR4 execute much faster than always reading the register itself. The change modified cpu_init() in common.c, so that the shadow CR4 gets initialized before anything uses it. Unfortunately, there's two cpu_init()s in common.c. There's one for 64-bit and one for 32-bit. The commit only added the shadow init to the 64-bit path, but the 32-bit path needs the init too. Link: http://lkml.kernel.org/r/20150227125208.71c36402@gandalf.local.home Fixes: 1e02ce4cccdc "x86: Store a per-cpu shadow copy of CR4" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150227145019.2bdd4354@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-28Merge branch 'linus' into x86/urgent, to merge dependent patchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "The arm-soc bug fixes this time around are mostly for the omap platform, coming from a pull request from Tony Lindgren and are almost entirely fixing dts files. The other two changes enable support for the shmobile platform in generic armv7 kernels and change some properties in the ARM64 reference board dts files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Enable shmobile platforms arm64: Add L2 cache topology to ARM Ltd boards/models ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Various arm64 fixes: - ftrace branch generation fix - branch instruction encoding fix - include files, guards and unused prototypes clean-up - minor VDSO ABI fix (clock_getres) - PSCI functions moved to .S to avoid compilation error with gcc 5 - pte_modify fix to not ignore the mapping type - crypto: AES interleaved increased to 4x (for performance reasons) - text patching fix for modules - swiotlb increased back to 64MB - copy_siginfo_to_user32() fix for big endian" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpuidle: add asm/proc-fns.h inclusion arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endian arm64: Increase the swiotlb buffer size 64MB arm64: Fix text patching logic when using fixmap arm64: crypto: increase AES interleave to 4x arm64: enable PTE type bit in the mask for pte_modify arm64: mm: remove unused functions and variable protoypes arm64: psci: move psci firmware calls out of line arm64: vdso: minor ABI fix for clock_getres arm64: guard asm/assembler.h against multiple inclusions arm64: insn: fix compare-and-branch encodings arm64: ftrace: fix ftrace_modify_graph_caller for branch replace
2015-02-27arm64: cpuidle: add asm/proc-fns.h inclusionLorenzo Pieralisi
ARM64 CPUidle driver requires the cpu_do_idle function so that it can be used to enter the shallowest idle state, and it is declared in asm/proc-fns.h. The current ARM64 CPUidle driver does not include asm/proc-fns.h explicitly and it has so far relied on implicit inclusion from other header files. Owing to some header dependencies reshuffling this currently triggers build failures when CONFIG_ARM64_64K_PAGES=y: drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state" drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of function "cpu_do_idle" [-Werror=implicit-function-declaration] cpu_do_idle(); ^ This patch adds the explicit inclusion of the asm/proc-fns.h header file in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed and the required header inclusion is added to the appropriate arch back-end CPUidle header, already included by the CPUidle arm64 driver, where CPUidle arch related function declarations belong. Reported-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endianCatalin Marinas
The native (64-bit) sigval_t union contains sival_int (32-bit) and sival_ptr (64-bit). When a compat application invokes a syscall that takes a sigval_t value (as part of a larger structure, e.g. compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t union is converted to the native sigval_t with sival_int overlapping with either the least or the most significant half of sival_ptr, depending on endianness. When the corresponding signal is delivered to a compat application, on big endian the current (compat_uptr_t)sival_ptr cast always returns 0 since sival_int corresponds to the top part of sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int is copied to the compat_siginfo_t structure. Cc: <stable@vger.kernel.org> Reported-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Tested-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: Increase the swiotlb buffer size 64MBCatalin Marinas
With commit 3690951fc6d4 (arm64: Use swiotlb late initialisation), the swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are platforms with 32-bit only devices that require bounce buffering via swiotlb. This patch changes the swiotlb initialisation to an early 64MB memblock allocation. In order to get the swiotlb buffer correctly allocated (via memblock_virt_alloc_low_nopanic), this patch also defines ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit DMA. Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: Fix text patching logic when using fixmapMarc Zyngier
Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: crypto: increase AES interleave to 4xArd Biesheuvel
This patch increases the interleave factor for parallel AES modes to 4x. This improves performance on Cortex-A57 by ~35%. This is due to the 3-cycle latency of AES instructions on the A57's relatively deep pipeline (compared to Cortex-A53 where the AES instruction latency is only 2 cycles). At the same time, disable inline expansion of the core AES functions, as the performance benefit of this feature is negligible. Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1): Baseline (2x interleave, inline expansion) ------------------------------------------ testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds This patch (4x interleave, no inline expansion) ----------------------------------------------- testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: enable PTE type bit in the mask for pte_modifyFeng Kan
Caught during Trinity testing. The pte_modify does not allow modification for PTE type bit. This cause the test to hang the system. It is found that the PTE can't transit from an inaccessible page (b00) to a valid page (b11) because the mask does not allow it. This happens when a big block of mmaped memory is set the PROT_NONE, then the a small piece is broken off and set to PROT_WRITE | PROT_READ cause a huge page split. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: mm: remove unused functions and variable protoypesYingjoe Chen
The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range were removed in commit fa48e6f780 'arm64: mm: Optimise tlb flush logic where we have >4K granule'. Global variable cpu_tlb was never used in arm64. Remove them. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: psci: move psci firmware calls out of lineWill Deacon
An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: vdso: minor ABI fix for clock_getresNathan Lynch
The vdso implementation of clock_getres currently returns 0 (success) whenever a null timespec is provided by the caller, regardless of the clock id supplied. This behavior is incorrect. It should fall back to syscall when an unrecognized clock id is passed, even when the timespec argument is null. This ensures that clock_getres always returns an error for invalid clock ids. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26ARM: multi_v7_defconfig: Enable shmobile platformsGeert Uytterhoeven
Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25Merge tag 'fixes-v4.0-rc1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for various omap devices. It's all dts and defconfig changes for this set: - Fix wrong DMA properties for dma to avoid them getting copied wrong again before we start actually using them - USB fixes to revert the extcon changes as the driver did not get merged yet and cause issues - Omap5 and dra7 fixes to boot from sata - Fix few am437x issues for i2c and pinctrl - Fix beaglebone for hardwared USB configuration - Defconfig changes for NAND, SATA and TPS62362 - Fix n900 i2c numbering for legacy user space and smc91x register offset so it works also for qemu - Fix incomplete USB configuration for dm816x * tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-25arm64: Add L2 cache topology to ARM Ltd boards/modelsSudeep Holla
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache information") adds cacheinfo support for ARM64. Since there's no architectural way of detecting the cpus that share particular cache, device tree can be used and the core cacheinfo already supports the same. This patch adds the L2 cache topology on Juno board, FVP/RTSM and foundation models. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25Merge branch 'clockevents/4.0-rc1' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevents driver fixes from Daniel Lezcano: - Fix the Kconfig to prevent the asm9260 timer to be compiled with allyesconfig with sparc/sparc64 (Daniel Lezcano) - Reorder the mtk driver init sequence in order to prevent a potential race when the clock is registered before the irq handler is set (Matthias Brugger) - Fix a section mismatch for the pxa driver (Robert Jarzmik) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-25clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfigDaniel Lezcano
The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation. Fix this by having the platform Kconfig to select the timer as it is done for the others drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Conflicts: drivers/clocksource/Kconfig
2015-02-24ARM: dts: am335x-bone*: usb0 is hardwired for peripheralRobert Nelson
Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: dra7x-evm: beagle-x15: Fix USB HostRoger Quadros
In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB") we enabled Extcon USB gpio to tackle the USB ID pin and get peripheral mode to work. But the extcon-gpio-usb driver [1] didn't make it into v4.0 and this makes the USB driver defer probe indefinitely breaking USB Host functionality. As a temporary fix we remove the extcon handle from the USB controller and add it back when the extcon driver merges in v4.1. [1] - https://lkml.org/lkml/2015/2/2/187 Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: Fix SATA bootRoger Quadros
SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: Enable OMAP NAND BCH driverRoger Quadros
Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: dra7: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap5: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap4: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap3: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap2: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: am437x-idk: fix sleep pinctrl stateFelipe Balbi
we have i2c0 sleep pinctrl state but were passing default state anyhow. Fix that. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: enable TPS62362 regulatorFelipe Balbi
This regulator is used on AM437x Industrial Development Kit. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: am437x-idk: fix TPS62362 i2c busFelipe Balbi
As it turns out, tps62362 is actually on I2C bus0, not bus1. This has gone unnoticed because Linux doesn't use (as of now) that regulator at all, it's setup by the bootloader and left as is. While at that, also add missing reg property for our regulator. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: n900: Fix offset for smc91x ethernetPali Rohár
Offset for smc91x must be zero otherwise smc91x linux kernel driver does not detect smc91x ethernet hardware in qemu N900 machine. The 0x300 offset was used to supress a warning the smsc911x driver produces about non-standard offset as 0x300 seems to be the EEPROM default. As only three address lines are connected both 0 and 0x300 will work just fine with 0 being correct. The warning about the non-standard offset can be fixed by writing to EEPROM as that's needed in any case to set the MAC address. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> [tony@atomide.com: updated comments, just use 0 instead of 0x0] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: n900: fix i2c bus numberingIvaylo Dimitrov
With legacy boot i2c buses on Nokia N900 are numbered i2c1, i2c2 and i2c3. Commit 20b80942ef4e ("ARM: dts: OMAP3+: Add i2c aliases") fixed the numbering with DT boot, but introduced a regression on N900 - aliases become i2c0, i2c1 and i2c2. Fix that by providing the correct aliases in the board dts. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: this is needed for legacy user space to work] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24Merge tag 'stable/for-linus-4.0-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bugfixes from David Vrabel: "Xen regression and bug fixes for 4.0-rc1 - Fix two regressions introduced in 4.0-rc1 affecting PV/PVH guests in certain configurations. - Prevent pvscsi frontends bypassing backend checks. - Allow privcmd hypercalls to be preempted even on kernel with voluntary preemption. This fixes soft-lockups with long running toolstack hypercalls (e.g., when creating/destroying large domains)" * tag 'stable/for-linus-4.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Initialize cr4 shadow for 64-bit PV(H) guests xen-scsiback: mark pvscsi frontend request consumed only after last read x86/xen: allow privcmd hypercalls to be preempted x86/xen: Make sure X2APIC_ENABLE bit of MSR_IA32_APICBASE is not set
2015-02-24Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull lguest fixes from Rusty Russell: "Lguest weird config build fix, and update to the documentation" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: lguest: update help text. lguest: now depends on PCI
2015-02-24ARM: dts: Fix USB dts configuration for dm816xTony Lindgren
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the USB completely because of an unconfigured USB phy, and I only tested it to make sure the Mentor chips are detected and clocked without a phy. After testing the USB with actual devices I noticed a few issues that should be fixed to avoid confusion: - The USB id pin on dm8168-evm is hardwired and can be changed only by software. As there are two USB-A type connectors, let's start both in host mode instead of otg. - The Mentor core is configured in such a way on dm8168-evm that it's not capable of multipoint at least on revision c board that I have. - We need ranges for the syscon to properly set up the phy as children of the SCM syscon area. - Let's not disable the second interface, the board specific dts files can do that if really needed. Most boards should just keep it enabled to ensure the device is idled properly. Note that also a phy and several musb fixes are still needed to make the USB to work properly in addition to this fix. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: OMAP5: Fix SATA PHY nodeRoger Quadros
The sata_ref_clk is a reference clock to the SATA phy. This fixes SATA malfunction across suspend/resume or when SATA driver is used as a module. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: DRA7: Fix SATA PHY nodeRoger Quadros
The sata_ref_clk is a reference clock to the SATA phy. This fixes SATA malfunction across suspend/resume or when SATA driver is used as a module. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24metag: Fix KSTK_EIP() and KSTK_ESP() macrosJames Hogan
The KSTK_EIP() and KSTK_ESP() macros should return the user program counter (PC) and stack pointer (A0StP) of the given task. These are used to determine which VMA corresponds to the user stack in /proc/<pid>/maps, and for the user PC & A0StP in /proc/<pid>/stat. However for Meta the PC & A0StP from the task's kernel context are used, resulting in broken output. For example in following /proc/<pid>/maps output, the 3afff000-3b021000 VMA should be described as the stack: # cat /proc/self/maps ... 100b0000-100b1000 rwxp 00000000 00:00 0 [heap] 3afff000-3b021000 rwxp 00000000 00:00 0 And in the following /proc/<pid>/stat output, the PC is in kernel code (1074234964 = 0x40078654) and the A0StP is in the kernel heap (1335981392 = 0x4fa17550): # cat /proc/self/stat 51 (cat) R ... 1335981392 1074234964 ... Fix the definitions of KSTK_EIP() and KSTK_ESP() to use task_pt_regs(tsk)->ctx rather than (tsk)->thread.kernel_context. This gets the registers from the user context stored after the thread info at the base of the kernel stack, which is from the last entry into the kernel from userland, regardless of where in the kernel the task may have been interrupted, which results in the following more correct /proc/<pid>/maps output: # cat /proc/self/maps ... 0800b000-08070000 r-xp 00000000 00:02 207 /lib/libuClibc-0.9.34-git.so ... 100b0000-100b1000 rwxp 00000000 00:00 0 [heap] 3afff000-3b021000 rwxp 00000000 00:00 0 [stack] And /proc/<pid>/stat now correctly reports the PC in libuClibc (134320308 = 0x80190b4) and the A0StP in the [stack] region (989864576 = 0x3b002280): # cat /proc/self/stat 51 (cat) R ... 989864576 134320308 ... Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.9+
2015-02-24x86/platform/intel-mid: Fix trivial printk message typo in ↵Yannick Guerrini
intel_mid_arch_setup() Change 'Uknown' to 'Unknown' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Cc: trivial@kernel.org Link: http://lkml.kernel.org/r/1424710358-10140-1-git-send-email-yguerrini@tomshardware.fr Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-23x86/xen: Initialize cr4 shadow for 64-bit PV(H) guestsBoris Ostrovsky
Commit 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") introduced CR4 shadows. These shadows are initialized in early boot code. The commit missed initialization for 64-bit PV(H) guests that this patch adds. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-02-23x86/xen: allow privcmd hypercalls to be preemptedDavid Vrabel
Hypercalls submitted by user space tools via the privcmd driver can take a long time (potentially many 10s of seconds) if the hypercall has many sub-operations. A fully preemptible kernel may deschedule such as task in any upcall called from a hypercall continuation. However, in a kernel with voluntary or no preemption, hypercall continuations in Xen allow event handlers to be run but the task issuing the hypercall will not be descheduled until the hypercall is complete and the ioctl returns to user space. These long running tasks may also trigger the kernel's soft lockup detection. Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to bracket hypercalls that may be preempted. Use these in the privcmd driver. When returning from an upcall, call xen_maybe_preempt_hcall() which adds a schedule point if if the current task was within a preemptible hypercall. Since _cond_resched() can move the task to a different CPU, clear and set xen_in_preemptible_hcall around the call. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-02-23x86/xen: Make sure X2APIC_ENABLE bit of MSR_IA32_APICBASE is not setBoris Ostrovsky
Commit d524165cb8db ("x86/apic: Check x2apic early") tests X2APIC_ENABLE bit of MSR_IA32_APICBASE when CONFIG_X86_X2APIC is off and panics the kernel when this bit is set. Xen's PV guests will pass this MSR read to the hypervisor which will return its version of the MSR, where this bit might be set. Make sure we clear it before returning MSR value to the caller. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-02-23arm64: guard asm/assembler.h against multiple inclusionsMarc Zyngier
asm/assembler.h lacks the usual guard against multiple inclusion, leading to a compilation failure if it is accidentally included twice. Using the classic #ifndef/#define/#endif construct solves the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-02-23arm64: insn: fix compare-and-branch encodingsRobin Murphy
Fix cbz/cbnz having the mask offset by a bit, and add encodings for tbz/tbnz so that all branch forms are represented. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-26 05:22:24 +0000