summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2010-10-28ENGR00133149 MX50: external speaker amp shutdownrel_imx_2.6.35_10.10.01Alan Tull
2010-10-27ENGR00132538 MX53: Get the CAN clk via dev_id and con_idWilliam Lai
2010-10-27ENGR00132935-3 MXC PWM:Use gpio when inverted pwm keeps lowLiu Ying
2010-10-27ENGR00132935-2 MX53 ARD:Add pwm enable/disable pad functionsLiu Ying
2010-10-27ENGR00132894 usb: clk_get should not be called at IRQ contextPeter Chen
2010-10-22ENGR00132877 add fixed regulator dcdc_3v15Alan Tull
2010-10-22ENGR00132875-2: MX50EVK:Add platform specific Suspend/Resume supportRanjani Vaidyanathan
2010-10-22ENGR00132849-1 mx50 rdp: set power_mmc to VSDAisheng.Dong
2010-10-22ENGR00132880 Add REGULATOR_CHANGE_STATUS ops mask for mc13892 regulatorsZhou Jingyu
2010-10-22ENGR00132885-2 Reverted the commit d6c3005 (ENGR00132615-2)Robby Cai
2010-10-21ENGR00132874 Mx50: Donot change Vcc votlage in LPAPM modeRanjani Vaidyanathan
2010-10-21ENGR00132832-1 MX50 SSI: fix ssi errors caused by mx5 dual fifo enableZeng Zhaoming
2010-10-21ENGR00132844 MX5x: Fix bug of UART DMA enable macro usageXinyu Chen
2010-10-20ENGR00132805 MX5 MFG: enable MAX173135 and LTC3589Lily Zhang
2010-10-19ENGR00132761 MX51: correct the debug early uart's clockXinyu Chen
2010-10-18ENGR00131932-1 MX51, MX53, sdma: Upgrade SDMA scripts to v1.1.0 versionZeng Zhaoming
2010-10-15ENGR00124788-2 MX53 ARD: Add Linear PMIC supportNancy Chen
2010-10-15ENGR00132674: MX50: Update DDR frequency change code to use new scripts.Ranjani Vaidyanathan
2010-10-15ENGR00126326-1 - MSL: Add support for MAX17135 temperature sensor driverDanny Nold
2010-10-15ENGR00132525-1 sgtl5000: audio clock gatingAlan Tull
2010-10-15ENGR00132634: MX50: Reduce STOP mode power consumptionRanjani Vaidyanathan
2010-10-15ENGR00132656 MX53 ARD: add MFG supportLily Zhang
2010-10-15ENGR00132639-1 Power: mxc_pwerkey break mx25 kernel buildHu hui
2010-10-15ENGR00131580-1 MX53: Add IEEE1588 hardware-assisted device definitionXie Xiaobo
2010-10-15ENGR00132615-2 mx50: delete AHB_HIGH_SET_POINT flag of esdhc clockAisheng.Dong
2010-10-15ENGR00132582 MX50: Add keypad for RD boardFrank Li
2010-10-14ENGR00132580 allow prediv by 1 for ext1 clkAlan Tull
2010-10-14ENGR00131925-1 MX5 ssi: Add SSI3 supportZeng Zhaoming
2010-10-14ENGR00132553-1 Power: enable power on/off key as suspend/resume keyHu hui
2010-10-14ENGR00132459-3 MX5: Support 2 PWM based backlightsWilliam Lai
2010-10-14ENGR00132459-2 PWM: Add PWMO signal invertion optionWilliam Lai
2010-10-13ENGR00132551 NAND: Adjust the boot partition size for MX53Jason Liu
2010-10-13ENGR00132477-1 IMX USB:fix some wakeup releated issuesHu hui
2010-10-12ENGR00132491-4 mx28/mx5: add ath6kl driver as module in defconfigAisheng.Dong
2010-10-12ENGR00132500 MX53 ARD: enable UART log in uncompress phaseLily Zhang
2010-10-12ENGR00132430-1 MX53: change max frequency of clocksLily Zhang
2010-10-12ENGR00132446 MX53 IOMUX:Change the pad setting of DI0_PIN15Liu Ying
2010-10-11ENGR00132184-3 MX50: register dma_apbh_device and platform dataRobby Cai
2010-10-11ENGR00132184-1 MX50: Port GPMI NAND driver to 2.6.35Robby Cai
2010-10-11ENGR00132389 imx53 MSL:fix hdmi chip i2c detect fail issueJason Chen
2010-10-09ENGR00132418-1 I.MX USB ID debounce only needed when wakeup event is presentHu hui
2010-10-09ENGR00132417 IMX53 USB fix build error for 53 ard boardHu hui
2010-10-09ENGR00132377 I.MX53 USB: enable usb host2 on imx53 ard boardHu hui
2010-10-08ENGR00132411 sgtl5000 vdda is on regulator sw4Alan Tull
2010-10-08ENGR00132073-1 usb: wakeup capability should be controlled by userPeter Chen
2010-10-06ENGR00132139 MX50: Set DDR to 24MHz in LPAPM modeRanjani Vaidyanathan
2010-10-05ENGR00132100 invert headphone detect logic levelAlan Tull
2010-10-01ENGR00132249 USB:Fix dead loop when cat iomemHuang Shijie
2010-09-30ENGR00126814 MX5: Reboot fails when dvfs-core is enabled.Ranjani Vaidyanathan
2010-09-30ENGR00132151 MX50-EVK: Fix Suspend/Resume.Ranjani Vaidyanathan
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-06 10:42:23 +0000