summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2013-07-10ENGR00270192 imx: pcie: toggle bit18 of grp1 fix pcie pm issue.Richard Zhu
2013-07-08ENGR00264701-1 Add new ioctl to lock VPU deviceHongzhang Yang
2013-07-08ENGR00269532 Correct @file comment in mxc_vpu.hHongzhang Yang
2013-07-05ENGR00269935 Fix the build breakMahesh Mahadevan
2013-07-05ENGR00269604 Fix the set clock-rate for audio & videoMahesh Mahadevan
2013-07-05ENGR00269616 mx6: Unexpected enter WAIT mode cause IPU underrunAnson Huang
2013-07-03ENGR00269449 mx6q/sdl clk:Correct register writing for aclk_podfLiu Ying
2013-06-28ENGR00269055 Fix build breakJay Monkman
2013-06-28ENGR00268893 mx6q/sdl clock:Correct emi_clk set/get rate in aclk_podfLiu Ying
2013-06-27ENGR00268864 Fix build breakJay Monkman
2013-06-27ENGR00238991-02 MX6 HDCP add IOCTL command defineSandor
2013-06-27ENGR00238991-01 MX6 SabreSD HDMI Adjust PHY configSandor
2013-06-26ENGR00267926 mx6: do not need to enable warm resetAnson Huang
2013-06-26ENGR00265476 MX6 SabreSD HDMI Compliance test 7-15 failedSandor
2013-06-25ENGR00268110 mx6: eim_clk div can't be used directlyAnson Huang
2013-06-21ENGR00268112 pcie: emaluate the pcie ep as ram device, configure the bar#Richard Zhu
2013-06-20ENGR00267089 mx6: Amend the definitions of ANADIG_ANA_MISC2_REGx_STEP_TIME_MASKPeter Chan
2013-06-19ENGR00262868 msl-mx6: usb: do not enable id wakeup interrupt for non-otgPeter Chen
2013-06-19ENGR00262528-1 mx6-msl: usb: the static variables needs to be initializedPeter Chen
2013-06-18ENGR00267442 mx6: clk: some clock settings are incorrectAnson Huang
2013-06-17ENGR00181680-1 No audio when play 3 streams after 3~10 seconds sometimesb02247
2013-06-14ENGR00267024 mx6q: Stop DMA memory fragmentationJay Monkman
2013-06-13ENGR00266312 mx6dl: add i2c4 bus support for sabresd/auto, arm2 platformsFugang Duan
2013-05-23ENGR00263639 MX6SL-Ensure Audio PLL (PLL4) is enabled correctlyRanjani Vaidyanathan
2013-05-23ENGR00263785 Update code to read GPIO signal valueMahesh Mahadevan
2013-05-22ENGR00263304-1 arm: IPUv3:Make ipu_enable_irq be able to return errorLiu Ying
2013-05-21ENGR00262815-1 MX6SL-Add support for SDMA buffers in IRAMRanjani Vaidyanathan
2013-05-20ENGR00262832 MX6SL-Lower Audio playback power.Ranjani Vaidyanathan
2013-05-15ENGR00262435 MX6x-Drain L1/L2 buffers before DDR enters self-refresh.Ranjani Vaidyanathan
2013-05-10ENGR00261451-3 mx6-msl: usb: add debounce time for otgsc valuePeter Chen
2013-05-10ENGR00261451-2 mx6-msl: usb: using correct registerPeter Chen
2013-05-06ENGR00261398-02 MX6DL: Enable CEC function for SabreSD boardSandor
2013-05-06ENGR00261398-01 MX6DL CEC PAD settingSandor
2013-04-24ENGR00260082 mx6sl_evk: Change wm8962's MCLK to 24MHzNicolin Chen
2013-04-24ENGR00258491-4 msl-mx6: usb: fix clock unmatch problem after unload modulePeter Chen
2013-04-24ENGR00258491-2 msl-mx6: usb: put PHY to be out of low power explicitlyPeter Chen
2013-04-22ENGR00259693 MX6DL/S-Enable routing of ENET interrupt to GPIORanjani Vaidyanathan
2013-04-19ENGR00259341 mx6: Need to keep WAIT mode fix bit set before standbyAnson Huang
2013-04-15ENGR00257847-1 MX6Q/DL-Fix Ethernet performance issue when WAIT mode is activeRanjani Vaidyanathan
2013-04-11ENGR00256417: MLB: can't receive data in wait modeTerry Lv
2013-04-11ENGR00257130-6 mx6-msl: usb: Add 500us delay for phy stable timePeter Chen
2013-04-11ENGR00257130-5 mx6sl: Add config for USB ID as system wakeup sourcePeter Chen
2013-04-11ENGR00257130-4 mx6sl: different layout for stop_mode_configPeter Chen
2013-04-11ENGR00257130-2 msl: usb: Disable auto power PHY if usb wakeup disabledPeter Chen
2013-04-11ENGR00257130-1 mx6sl_evk: Add Host 1 vbus callbackPeter Chen
2013-04-09ENGR00257661 pcie: imx: pcie ep/rc validationRichard Zhu
2013-04-09ENGR00257658 Revert "ENGR00256893-1 MX6Q/DL-Fix Ethernet performance issueJason Liu
2013-04-03ENGR00256893-1 MX6Q/DL-Fix Ethernet performance issue when WAIT mode is activeRanjani Vaidyanathan
2013-04-03ENGR00256315-4 ARM: imx6: weim-nor: set proper PAD valueHuang Shijie
2013-04-03ENGR00256315-3 ARM: WEIM-NOR: set the proper timingHuang Shijie