summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-12-16ARM: OMAP4: PRM: use PRCM interrupt handlerTero Kristo
Use the new PRCM interrupt handler code on OMAP4 systems. The OMAP code will need to be converted to use sparse IRQs for this to work. Until that time, the following message will appear on boot: PRCM: failed to allocate irq descs: -12 Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: split this from a previous patch to this patch; call omap4xxx_prcm_init() during init; write trivial commit log] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP3: pm: use prcm chain handlerTero Kristo
PM interrupt handling is now done through the PRCM chain handler. The interrupt handling logic is also split in two parts, to serve IO and WKUP events separately. This allows us to handle IO chain events in a clean way. Core event code is also changed in accordance to this, as PRCM interrupt handling is done by independent handlers, and the core handler should not clear the IO events anymore. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: use pr_err(); combined with portions of earlier patches and the "do not enable PRCM MPU interrupts manually" patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup padTero Kristo
By default all registered pads will trigger mpu_irqs[0]. Now there is an API for selecting used mpu_irq on pad basis, which can be used to trigger different irq handlers for different pads in the same hwmod. Each pad that requires its interrupt to be re-routed this way must have a separate call to omap_hwmod_pad_route_irq(hwmod, pad, irq). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: moved fn to omap_hwmod.c; separated fn from mux scan_wakeups changes; added kerneldoc] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP2+: mux: add support for PAD wakeup interruptsTero Kristo
OMAP mux now parses active wakeup events from pad registers and calls corresponding hwmod ISRs once a wakeup is detected. This is accomplished by registering an interrupt handler for PRCM IO event, which is raised every time the HW detects wakeups. [paul@pwsan.com: This patch is a merge of Govindraj R's "ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status" patch, Tero Kristo's "ARM: OMAP2+: mux: add support for PAD wakeup interrupts" patch, and part of Tero's "ARM: OMAP: mux: add support for selecting mpu_irq for each wakeup pad" patch.] Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Govindraj.R <govindraj.raja@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> [paul@pwsan.com: reduced indentation level; renamed omap_hwmod function; improved function documentation; modified to iterate only through dynamic pads; modified to skip pads where idle mode doesn't enable wakeups; split patches] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP: PRCM: add suspend prepare / finish supportTero Kristo
PRCM chain handler needs to disable forwarding of interrupts during suspend, because runtime PM is disabled and most of the drivers are potentially not able to handle interrupts coming at this time. This patch masks all the PRCM interrupt events if a PRCM interrupt occurs during suspend, but does not ack them. Once suspend finish is called, all the masked events will be re-enabled, which causes immediate PRCM interrupt and handles the postponed event. The suspend prepare and complete callbacks will be called from pm34xx.c / pm44xx.c files in the following patches. The functions defined in this patch should eventually be moved to suspend->prepare and suspend->finish driver hooks, once the PRCM chain handler will be made as its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: add kerneldoc, add omap_prcm_irq_setup.saved_mask, add fn ptrs for save_and_clear_irqen() and restore_irqen()] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP: PRCM: add support for chain interrupt handlerTero Kristo
Introduce a chained interrupt handler mechanism for the PRCM interrupt, so that individual PRCM event can cleanly be handled by handlers in separate drivers. We do this by introducing PRCM event names, which are then matched to the particular PRCM interrupt bit depending on the specific OMAP SoC being used. PRCM interrupts have two priority levels, high or normal. High priority is needed for IO event handling, so that we can be sure that IO events are processed before other events. This reduces latency for IO event customers and also prevents incorrect ack sequence on OMAP3. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Avinash.H.M <avinashhm@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Govindraj.R <govindraj.raja@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: drop some dead code; use SoC-specific pending IRQ detection; move code to prm_common.c; add lots of documentation; remove saved_mask; add OCP barrier on ISR exit; improved error handling; split out per-SoC initialization to a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrierPaul Walmsley
Add PRM functions to test for pending PRM IRQs. This will be used in a subsequent patch to implement the PRM interrupt handler on the MPU. Add PRM functions to ensure that all outstanding writes from the MPU to the PRM IP block have completed before continuing execution. This will be used in a subsequent patch to ensure that all PRM interrupt status bits are cleared in the hardware before exiting the ISR. Normally we would not expose such a low-level function to other code. But the current implementation of the PRM interrupt code, which uses the generic IRQ chip code, doesn't give us a choice. The pending PRM IRQ functions are based on code originally written by Tero Kristo <t-kristo@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com>
2011-12-16ARM: OMAP2+: hwmod: Add API to enable IO ring wakeupGovindraj R
Add API to enable IO pad wakeup capability based on mux pad and wake_up enable flag available from hwmod_mux initialization. Use the wakeup_enable flag and enable wakeup capability for the given pads. Wakeup capability will be enabled/disabled during hwmod idle transition based on whether wakeup_flag is set or cleared. If the hwmod is currently idled, and any mux values were changed by _set_idle_ioring_wakeup(), the SCM PADCTRL registers will be updated. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: rearranged code to limit indentation; cleaned up function documentation; removed unused non-static functions; modified to search all hwmod pads, not just dynamic remuxing ones; modified to update SCM regs if hwmod is currently idle and any pads have changed] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic listPaul Walmsley
omap_hwmod_mux() currently only iterates through the dynamic pad list. This list currently only consists of pads with the OMAP_DEVICE_MUX_REMUX flag set. Subsequent patches in this series will cause hwmod mux entries with the OMAP_DEVICE_MUX_WAKEUP flag set to be changed dynamically, to control hwmod I/O ring wakeup. For this to work correctly, hwmod mux entries with the OMAP_DEVICE_MUX_WAKEUP flag set must also be added to the dynamic pad list. So this patch modifies omap_hwmod_mux_init() to do so. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-12-01Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-11-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: ux500: update defconfig ARM: u300: update defconfig ARM: at91: enable additional boards in existing soc defconfig files ARM: at91: refresh soc defconfig files for 3.2 ARM: at91: rename defconfig files appropriately ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module ARM: OMAP2+: Remove empty io.h ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined ARM: OMAP: smartreflex: fix IRQ handling bug ARM: OMAP: PM: only register TWL with voltage layer when device is present ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs arm: mx28: fix bit operation in clock setting ARM: imx: export imx_ioremap ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code ARM: mx5: Fix checkpatch warnings in cpu-imx5.c MAINTAINERS: Add missing directory ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' ARM: imx6q: move clock register map to machine_desc.map_io ARM: pxa168/gplugd: add the correct SSP device ARM: Update mach-types to fix mxs build breakage ...
2011-11-30ARM: 7182/1: ARM cpu topology: fix warningVincent Guittot
kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-30ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and belowJon Medhurst (Tixy)
The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Tested-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-30ARM: 7180/1: Change kprobes testcase with unpredictable STRD instructionJon Medhurst (Tixy)
There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Tested-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-29Merge branch 'defconfigs-for-arnd' of ↵Arnd Bergmann
git://git.linaro.org/people/triad/linux-stericsson into fixes
2011-11-29ARM: ux500: update defconfigLinus Walleij
This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-29ARM: u300: update defconfigLinus Walleij
This updates the U300 defconfig to support some new drivers like FSMC, sets it to use the MMC clock gating scheme, and removes some stale config options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-26ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculationWill Deacon
Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7176/1: cpu_pm: register GIC PM notifier only onceMarc Zyngier
When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Colin Cross <ccross@android.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernelsJon Medhurst
When compiling kprobes-test-thumb.c an error like below may occur: /tmp/ccKcuJcG.s:19179: Error: offset out of range This is caused by the compiler underestimating the size of the inline assembler instructions containing ".space 0x1000" and failing to spill the literal pool in time to prevent the generation of PC relative load instruction with invalid offsets. The fix implemented by this patch is to replace a single large .space directive by a number of 4 byte .space's. This requires splitting the macros which generate test cases for branch instructions into two forms: one with, and one without support for inserting extra code between branch and target. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <jon.medhurst@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocationsSumit Bhattacharya
dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch is ported from arch/avr32 (commit 3611553ef985ef7c5863c8a94641738addd04cff). [swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup] Signed-off-by: Sumit Bhattacharya <sumitb@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7171/1: unwind: add unwind directives to bitops assembly macrosWill Deacon
The bitops functions (e.g. _test_and_set_bit) on ARM do not have unwind annotations and therefore the kernel cannot backtrace out of them on a fatal error (for example, NULL pointer dereference). This patch annotates the bitops assembly macros with UNWIND annotations so that we can produce a meaningful backtrace on error. Callers of the macros are modified to pass their function name as a macro parameter, enforcing that the macros are used as standalone function implementations. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7170/2: fix compilation breakage in entry-armv.SGuennadi Liakhovetski
Fix compilation failure, when Thumb support is not enabled: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:501: Error: backward ref to unknown label "2:" arch/arm/kernel/entry-armv.S:502: Error: backward ref to unknown label "3:" make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7168/1: use cache type functions for arch_get_unmapped_areaRob Herring
There are already cache type decoding functions, so use those instead of custom decode code which only works for ARMv6. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-25powerpc/44x: Add mtd ndfc to the ppx44x defconfigTony Breeds
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25powerpc: Fix compiliation with hugetlbfs enabledKumar Gala
arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-24Merge branch 'fixes-dss' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-11-24Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-11-24Merge branch 'at91/defconfig' into fixesArnd Bergmann
2011-11-24ARM: at91: enable additional boards in existing soc defconfig filesJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24ARM: at91: refresh soc defconfig files for 3.2Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24ARM: at91: rename defconfig files appropriatelyJean-Christophe PLAGNIOL-VILLARD
rename all Atmel reference board as soc defconfig Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24arch/powerpc/sysdev/ehv_pic.c: add missing kfreeJulia Lawall
At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/fsl-lbc: Fix for fsl_upmAlexandre Rusev
If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev <arusev@dev.rtsoft.ru> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/qe: Fixup QE_General4 errataJoakim Tjernlund
QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/85xx: Fix compile error on p3060_qds.cKumar Gala
arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO'Paul Bolle
The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIeRoy Zang
P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23Merge branch 'hwmod_dss_fixes_3.2rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
fixes-dss
2011-11-23Merge branch 'fixes-v3.2-rc2' into fixesTony Lindgren
2011-11-23ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as moduleGovindraj.R
Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2+: Remove empty io.hThomas Weber
The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is definedMing Lei
This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: smartreflex: fix IRQ handling bugFelipe Balbi
Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: PM: only register TWL with voltage layer when device is presentKevin Hilman
Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIssricharan
The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23Merge branch 'fix' of git://github.com/ycmiao/pxa-linux into fixesArnd Bergmann
2011-11-23Merge branch 'imx-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into fixes
2011-11-23Merge branch 'samsung-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-11-23Merge branch 'for-arnd' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-13 20:25:41 +0000