summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-02-16ENGR00174649 i.mx6dl: clock: set ipu1 clock to 270M, change ldb_di_clk parentWayne Zou
2012-02-16ENGR00174540: i.mx6: anatop_regulator: LDO voltage print not correctlyJason Liu
2012-02-16ENGR00174532 [mx6Q]Change 2D clock to 480MLarry Li
2012-02-15ENGR00174106-1 - EPDC fb: Support EPDC on MX 6DL/SDanny Nold
2012-02-15ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.Fugang Duan
2012-02-15ENGR00174425: i.mx6: i.mx6dl: clock: set gpu2d_axi clock parent to mmdc0Jason Liu
2012-02-15ENGR00174423-2: i.mx6: clock: code clean up in pfd_set_rateJason Liu
2012-02-15ENGR00174423-1 i.mx6: cpu_op: code clean upJason Liu
2012-02-14ENGR00174381 imx6q-sabreauto: spdif remove tx clock settingsAdrian Alonso
2012-02-14ENGR00174299-3: Add ePxP config option in defconfigRobby Cai
2012-02-14ENGR00174299-2: MSL part: add ePxP V2 driverRobby Cai
2012-02-14ENGR00174121-3 MX6: add max8903 driver in defconfig.Zhang Jiejing
2012-02-14ENGR00174121-2 MX6Q_SABRESD: add battery chip support.Zhang Jiejing
2012-02-13ENGR00174309:mx6/dl: gpu:enable 2d and 3dWu Guoxing
2012-02-13ENGR00174316 MX6Q ARM2: Fix ov5640_mipi IOMUX incorrect configureEven Xu
2012-02-13ENGR00174315 MX6Q max7310 set the default value of PCIE PWR ctrl2 to lowRichard Zhu
2012-02-13ENGR00174301 [mx6dl perfmon]add workaround for TKT055916Tony Lin
2012-02-13ENGR00174302 [MX6]Clean build warningAnson Huang
2012-02-10ENGR00174232 [mx6q perfmon]PDM No. TKT055916: remove workaround for TO1.1Tony Lin
2012-02-10ENGR00170126 mx6q sabresd: add GPIO key deviceXinyu Chen
2012-02-10ENGR00174229-2 imx6_defconf: add sensors devices driversXinyu Chen
2012-02-10ENGR00174229-1 mx6q sabresd: add sensors devicesXinyu Chen
2012-02-10ENGR00173857 MX6Q: add 600M work pointZhang Jiejing
2012-02-10ENGR00173463 i.mx6dl: vpu: disable iram usageSammy He
2012-02-10ENGR00174224 [MX6Q]: Add new AR6003 driver to 3.0.15 into default configRyan QIAN
2012-02-10ENGR00174033-1 MX6 PCIE: add pcie RC driverRichard Zhu
2012-02-10ENGR00174128-2 Revert "Remove the discharge for VBUS and DP-2"Peter Chen
2012-02-09ENGR00174094 i.MX6DL: Change CPU voltages to 1VNancy Chen
2012-02-09ENGR00174152 i.mx6/clock: set ddr clock parent to pll2_mfd_400MJason Liu
2012-02-09ENGR00174103 [usb hsic] add usb hsic support for mx6dlTony LIU
2012-02-09ENGR00174037-1 Add HSIC suspend/resume featureTony LIU
2012-02-08ENGR00172342-1 EDID parse audio data blocksAlan Tull
2012-02-08ENGR00174054-2: imx6_defconfig: enable CONFIG_COMPACTIONJason Liu
2012-02-08ENGR00174054-1: i.mx6_defconfig: sync imx6_defconfig with v3.0.15Jason Liu
2012-02-08ENGR00173845 MX6Q SABRESD camera: add camera power down functionYuxi Sun
2012-02-08ENGR00173947-2 MX6Q/ARCH : enable the BBT support to ARM2Huang Shijie
2012-02-08ENGR00172274-01 - [MX6]: rework IEEE-1588 ts_clk in MX6Q ARIK CPU board.Fugang Duan
2012-02-08ENGR00174021 MX6Q/ARCH : fix the section mismatchHuang Shijie
2012-02-07ENGR00173869-8: i.mx6: ARM2: add i.mx6dl supportJason Liu
2012-02-07ENGR00173869-7: i.mx6: sdma: add i.mx6dl supportJason Liu
2012-02-07ENGR00173869-6: i.mx6: gpio: add the i.mx6dl supportJason Liu
2012-02-07ENGR00173869-5: i.mx6: don't turn off MMDC clock on i.mx6dlJason Liu
2012-02-07ENGR00173869-4: i.mx6: add the i.mx6dl iomux supportJason Liu
2012-02-07ENGR00173869-3: i.mx6: add the cpu_is_mx6dl() supportJason Liu
2012-02-07ENGR00173869-2: i.mx6: add the i.mx6dl memory map and irq definionJason Liu
2012-02-07ENGR00173869-1: i.mx6: cosmetic the codeJason Liu
2012-02-07ENGR00173731-5 MX6Q/ARCH :rename gpmi-nfc to gpmi-nandHuang Shijie
2012-02-07ENGR00173731-4 MX6Q/ARCH : add mxs_reset_block()Huang Shijie
2012-02-07ENGR00173731-1 mxs-dma : rename the dma.h for mxs-dmaHuang Shijie
2012-02-07ENGR00173615 [mx5 mmc]fix mx5 build errorTony Lin
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-28 01:06:06 +0000