summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-03-14powerpc: Apply early paca fixups to boot_paca and the boot cpu's pacaMichael Ellerman
commit 25e138149c19fa0680147b825be475f5fd57f155 upstream. In commit 466921c we added a hack to set the paca data_offset to zero so that per-cpu accesses would work on the boot cpu prior to per-cpu areas being setup. This fixed a problem with lockdep touching per-cpu areas very early in boot. However if we combine CONFIG_LOCK_STAT=y with any of the PPC_EARLY_DEBUG options, we can hit the same problem in udbg_early_init(). To avoid that we need to set the data_offset of the boot_paca also. So factor out the fixup logic and call it for both the boot_paca, and "the paca of the boot cpu". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper
commit 93fff4ce19f9978cc1c59db42760717477939249 upstream. When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: mxs_defconfig: Make USB host functional againFabio Estevam
commit f6c49da98dd6eacb85034d21d16e1428e03e190f upstream. commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST. Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14gpio: mvebu: Add clk support to prevent lockupAndrew Lunn
commit de88747f514a4e0cca416a8871de2302f4f77790 upstream. The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14rtc: rtc-mv: Add support for clk to avoid lockupsAndrew Lunn
commit 89c58c198b252f2bc20657fdd72a2aea788c435c upstream. The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14x86/kvm: Fix pvclock vsyscall fixmapPeter Hurley
commit 3d2a80a230250c2534ce5b17503670adaf1d7fff upstream. The physical memory fixmapped for the pvclock clock_gettime vsyscall was allocated, and thus is not a kernel symbol. __pa() is the proper method to use in this case. Fixes the crash below when booting a next-20130204+ smp guest on a 3.8-rc5+ KVM host. [ 0.666410] udevd[97]: starting version 175 [ 0.674043] udevd[97]: udevd:[97]: segfault at ffffffffff5fd020 ip 00007fff069e277f sp 00007fff068c9ef8 error d Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14x86: pvclock kvm: align allocation size to page sizeMarcelo Tosatti
commit ed55705dd5008b408c48a8459b8b34b01f3de985 upstream. To match whats mapped via vsyscalls to userspace. Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14tile: work around bug in the generic sys_llseekChris Metcalf
commit 5a114b98661e3aaa0ac085eb931584dce3b0ef9b upstream. sys_llseek should specify the high and low 32-bit seek values as "unsigned int" but instead it specifies "unsigned long". Since compat syscall arguments are always sign-extended on tile, this means that a seek value of 0xffffffff will be incorrectly interpreted as a value of -1ULL. To avoid the risk of breaking binary compatibility on architectures that already use sys_llseek this way, we follow the same path as MIPS and provide a wrapper override. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bitWill Deacon
commit f2fe09b055e2549de41fb107b34c60bac4a1b0cf upstream. Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2, regardless of the settings in the HDCR. This patch fixes the broken mask. Reported-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7659/1: mm: make mm->context.id an atomic64_t variableWill Deacon
commit 8a4e3a9ead7e37ce1505602b564c15da09ac039f upstream. mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7658/1: mm: fix race updating mm->context.id on ASID rolloverWill Deacon
commit 37f47e3d62533c931b04cb409f2eb299e6342331 upstream. If a thread triggers an ASID rollover, other threads of the same process must be made to wait until the mm->context.id for the shared mm_struct has been updated to new generation and associated book-keeping (e.g. TLB invalidation) has ben performed. However, there is a *tiny* window where both mm->context.id and the relevant active_asids entry are updated to the new generation, but the TLB flush has not been performed, which could allow another thread to return to userspace with a dirty TLB, potentially leading to data corruption. In reality this will never occur because one CPU would need to perform a context-switch in the time it takes another to do a couple of atomic test/set operations but we should plug the race anyway. This patch moves the active_asids update until after the potential TLB flush on context-switch. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7657/1: head: fix swapper and idmap population with LPAE and big-endianWill Deacon
commit d61947a164760ac520cb416768afdf38c33d60e7 upstream. The LPAE page table format uses 64-bit descriptors, so we need to take endianness into account when populating the swapper and idmap tables during early initialisation. This patch ensures that we store the two words making up each page table entry in the correct order when running big-endian. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14xen/pci: We don't do multiple MSI's.Konrad Rzeszutek Wilk
commit 884ac2978a295b7df3c4a686d3bff6932bbbb460 upstream. There is no hypercall to setup multiple MSI per PCI device. As such with these two new commits: - 08261d87f7d1b6253ab3223756625a5c74532293 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() - 5ca72c4f7c412c2002363218901eba5516c476b1 AHCI: Support multiple MSIs we would call the PHYSDEVOP_map_pirq 'nvec' times with the same contents of the PCI device. Sander discovered that we would get the same PIRQ value 'nvec' times and return said values to the caller. That of course meant that the device was configured only with one MSI and AHCI would fail with: ahci 0000:00:11.0: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) (XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1) ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ahci: probe of 0000:00:11.0 failed with error -22 That is b/c in ahci_host_activate the second call to devm_request_threaded_irq would return -EINVAL as we passed in (on the second run) an IRQ that was never initialized. Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14xen/pat: Disable PAT using pat_enabled value.Konrad Rzeszutek Wilk
commit c79c49826270b8b0061b2fca840fc3f013c8a78a upstream. The git commit 8eaffa67b43e99ae581622c5133e20b0f48bcef1 (xen/pat: Disable PAT support for now) explains in details why we want to disable PAT for right now. However that change was not enough and we should have also disabled the pat_enabled value. Otherwise we end up with: mmap-example:3481 map pfn expected mapping type write-back for [mem 0x00010000-0x00010fff], got uncached-minus ------------[ cut here ]------------ WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0() mem 0x00010000-0x00010fff], got uncached-minus ------------[ cut here ]------------ WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0() ... Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu Call Trace: [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0 [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100 [<ffffffff81157459>] unmap_vmas+0x49/0x90 [<ffffffff8115f808>] exit_mmap+0x98/0x170 [<ffffffff810559a4>] mmput+0x64/0x100 [<ffffffff810560f5>] dup_mm+0x445/0x660 [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510 [<ffffffff81057931>] do_fork+0x91/0x350 [<ffffffff81057c76>] sys_clone+0x16/0x20 [<ffffffff816ccbf9>] stub_clone+0x69/0x90 [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f ---[ end trace 4918cdd0a4c9fea4 ]--- (a similar message shows up if you end up launching 'mcelog') The call chain is (as analyzed by Liu, Jinsong): do_fork --> copy_process --> dup_mm --> dup_mmap --> copy_page_range --> track_pfn_copy --> reserve_pfn_range --> line 624: flags != want_flags It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR (_PAGE_CACHE_UC_MINUS). Stefan Bader dug in this deep and found out that: "That makes it clearer as this will do reserve_memtype(...) --> pat_x_mtrr_type --> mtrr_type_lookup --> __mtrr_type_lookup And that can return -1/0xff in case of MTRR not being enabled/initialized. Which is not the case (given there are no messages for it in dmesg). This is not equal to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS. It looks like the problem starts early in reserve_memtype: if (!pat_enabled) { /* This is identical to page table setting without PAT */ if (new_type) { if (req_type == _PAGE_CACHE_WC) *new_type = _PAGE_CACHE_UC_MINUS; else *new_type = req_type & _PAGE_CACHE_MASK; } return 0; } This would be what we want, that is clearing the PWT and PCD flags from the supported flags - if pat_enabled is disabled." This patch does that - disabling PAT. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7654/1: Preserve L_PTE_VALID in pte_modify()Catalin Marinas
commit 69dde4c52dbac2891b49ff9723d9c84efc5baf6f upstream. Following commit 26ffd0d4 (ARM: mm: introduce present, faulting entries for PAGE_NONE), if a page has been mapped as PROT_NONE, the L_PTE_VALID bit is cleared by the set_pte_ext() code. With LPAE the software and hardware pte share the same location and subsequent modifications of pte range (change_protection()) will leave the L_PTE_VALID bit cleared. This patch adds the L_PTE_VALID bit to the newprot mask in pte_modify(). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Subash Patel <subash.rp@samsung.com> Tested-by: Subash Patel <subash.rp@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clockNicolas Pitre
commit 70264367a243a68b1d5636ffb570183449803cbe upstream. When udelay() is implemented using an architected timer, it is wrong to scale loops_per_jiffy when changing the CPU clock frequency since the timer clock remains constant. The lpj should probably become an implementation detail relevant to the CPU loop based delay routine only and more confined to it. In the mean time this is the minimal fix needed to have expected delays with the timer based implementation when cpufreq is also in use. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: fix scheduling while atomic warning in alignment handling codeRussell King
commit b255188f90e2bade1bd11a986dd1ca4861869f4d upstream. Paolo Pisati reports that IPv6 triggers this warning: BUG: scheduling while atomic: swapper/0/0/0x40000100 Modules linked in: [<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c) [<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740) [<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34) [<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44) [<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c) [<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98) [<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0763d70 to 0xc0763db8) 3d60: e97e805e e97e806e 2c000000 11000000 3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c 3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff [<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8) Fix this by using probe_kernel_address() stead of __get_user(). Reported-by: Paolo Pisati <p.pisati@gmail.com> Tested-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: VFP: fix emulation of second VFP instructionRussell King
commit 5e4ba617c1b584b2e376f31a63bd4e734109318a upstream. Martin Storsjö reports that the sequence: ee312ac1 vsub.f32 s4, s3, s2 ee702ac0 vsub.f32 s5, s1, s0 e59f0028 ldr r0, [pc, #40] ee111a90 vmov r1, s3 on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5) where s3 is a denormal and s2 is zero results in incorrect behaviour - the instruction "vsub.f32 s5, s1, s0" is not executed: VFP: bounce: trigger ee111a90 fpexc d0000780 VFP: emulate: INST=0xee312ac1 SCR=0x00000000 ... As we can see, the instruction triggering the exception is the "vmov" instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to properly take account of the FPEXC_FP2V flag in FPEXC. This is because the test for the second instruction register being valid is bogus, and will always skip emulation of the second instruction. Reported-by: Martin Storsjö <martin@martin.st> Tested-by: Martin Storsjö <martin@martin.st> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86, efi: Allow slash in file path of initrdLee, Chun-Yi
commit deb94101c4fda22e152c2a311210cf09ae51adf6 upstream. When initrd file didn't put at the same place with stub kernel, we need give the file path of initrd, but need use backslash to separate directory and file. It's not friendly to unix/linux user, and not so intuitive for bootloader forward paramters to efi stub kernel by chainloading. This patch add support to handle_ramdisks for allow slash in file path of initrd, it convert slash to backlash when parsing path. In additional, this patch also separates print code of efi_char16_t from efi_printk, and print out the path/filename of initrd when failed to open initrd file. It's good for debug and discover typo. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86: Make sure we can boot in the case the BDA contains pure garbageH. Peter Anvin
commit 7c10093692ed2e6f318387d96b829320aa0ca64c upstream. On non-BIOS platforms it is possible that the BIOS data area contains garbage instead of being zeroed or something equivalent (firmware people: we are talking of 1.5K here, so please do the sane thing.) We need on the order of 20-30K of low memory in order to boot, which may grow up to < 64K in the future. We probably want to avoid the lowest of the low memory. At the same time, it seems extremely unlikely that a legitimate EBDA would ever reach down to the 128K (which would require it to be over half a megabyte in size.) Thus, pick 128K as the cutoff for "this is insane, ignore." We may still end up reserving a bunch of extra memory on the low megabyte, but that is not really a major issue these days. In the worst case we lose 512K of RAM. This code really should be merged with trim_bios_range() in arch/x86/kernel/setup.c, but that is a bigger patch for a later merge window. Reported-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86, efi: Make "noefi" really disable EFI runtime serivcesMatt Fleming
commit fb834c7acc5e140cf4f9e86da93a66de8c0514da upstream. commit 1de63d60cd5b ("efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter") attempted to make "noefi" true to its documentation and disable EFI runtime services to prevent the bricking bug described in commit e0094244e41c ("samsung-laptop: Disable on EFI hardware"). However, it's not possible to clear EFI_RUNTIME_SERVICES from an early param function because EFI_RUNTIME_SERVICES is set in efi_init() *after* parse_early_param(). This resulted in "noefi" effectively becoming a no-op and no longer providing users with a way to disable EFI, which is bad for those users that have buggy machines. Reported-by: Walt Nelson Jr <walt0924@gmail.com> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1361392572-25657-1-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86/apic: Fix parsing of the 'lapic' cmdline optionMathias Krause
commit 27cf929845b10043f2257693c7d179a9e0b1980e upstream. Including " lapic " in the kernel cmdline on an x86-64 kernel makes it panic while parsing early params -- e.g. with no user visible output. Fix this bug by ensuring arg is non-NULL before passing it to strncmp(). Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1361303227-13174-1-git-send-email-minipli@googlemail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28Purge existing TLB entries in set_pte_at and ptep_set_wrprotectJohn David Anglin
commit 7139bc1579901b53db7e898789e916ee2fb52d78 upstream. This patch goes a long way toward fixing the minifail bug, and it  significantly improves the stability of SMP machines such as the rp3440.  When write  protecting a page for COW, we need to purge the existing translation.  Otherwise, the COW break doesn't occur as expected because the TLB may still have a stale entry which allows writes. [jejb: fix up checkpatch errors] Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28powerpc/eeh: Fix crash when adding a device in a slot with DDWThadeu Lima de Souza Cascardo
commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream. The DDW code uses a eeh_dev struct from the pci_dev. However, this is not set until eeh_add_device_late is called. Since pci_bus_add_devices is called before eeh_add_device_late, the PCI devices are added to the bus, making drivers' probe hooks to be called. These will call set_dma_mask, which will call the DDW code, which will require the eeh_dev struct from pci_dev. This would result in a crash, due to a NULL dereference. Calling eeh_add_device_late after pci_bus_add_devices would make the system BUG, because device files shouldn't be added to devices there were not added to the system. So, a new function is needed to add such files only after pci_bus_add_devices have been called. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28uprobes/powerpc: Add dependency on single step emulationSuzuki K. Poulose
commit 5e249d4528528c9a77da051a89ec7f99d31b83eb upstream. Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no such luxury. Consolidate other users that depend on sstep and create a new config option. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28powerpc/kexec: Disable hard IRQ before kexecPhileas Fogg
commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream. Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: 7643/1: sched: correct update_sched_clock()Joonsoo Kim
commit 7c4e9ced424be4d36df6a3e3825763e97ee97607 upstream. If we want load epoch_cyc and epoch_ns atomically, we should update epoch_cyc_copy first of all. This notify reader that updating is in progress. If we update epoch_cyc first like as current implementation, there is subtle error case. Look at the below example. <Initial Condition> cyc = 9 ns = 900 cyc_copy = 9 == CASE 1 == <CPU A = reader> <CPU B = updater> write cyc = 10 read cyc = 10 read ns = 900 write ns = 1000 write cyc_copy = 10 read cyc_copy = 10 output = (10, 900) == CASE 2 == <CPU A = reader> <CPU B = updater> read cyc = 9 write cyc = 10 write ns = 1000 read ns = 1000 read cyc_copy = 9 write cyc_copy = 10 output = (9, 1000) If atomic read is ensured, output should be (9, 900) or (10, 1000). But, output in example case are not. So, change updating sequence in order to correct this problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28arm64: compat: use compat_uptr_t type for compat_ucontext.uc_linkWill Deacon
commit c0e01d5d8f15c085236df184e5bc3d79a8b700cd upstream. struct compat_ucontext * is a 64-bit pointer, so we need to use a compat_uptr_t instead to avoid declaring a structure incompatible with what AArch32 userspace expects. Reported-by: Edmund Grimley-Evans <Edmund.Grimley-Evans@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMUWill Deacon
commit ab2a724a2ef9cee5957692257a5d1f08fd7acbbd upstream. When running on Integrator/AP using atags, ap_syscon_base is initialised in ->map_io, which isn't called for !MMU platforms. Instead, initialise the pointer in ->machine_init, as we do when booting with device-tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: i.MX25: clk: parent per5_clk to AHB clockSteffen Trumtrar
commit 4b526ca5f627188425184a22ed46c91baa602d43 upstream. The mxc-timer on the imx25 needs to be derived from the AHB clock. If a bootloader reparents this clock to the ipg_clk_highfreq, which according to the datasheet is a valid operation, the system can/will produce lockups/ freezes after some time [1]. This can be forced with code like while(1) syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp); This was already fixed with the commit "i.MX25 GPT clock fix: ensure correct the clock source" [2], for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework ("ARM i.MX25: implement clocks using common clock framework") [3] [1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html [2]: 2012d9ca2a1381ae3e733330a7f0d1d2f1988bba [3]: 6bbaec5676e4f475b0d78743cbd4c70a8804ce14 Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: samsung: fix assembly syntax for new gasArnd Bergmann
commit 2815774bb38445006074e16251b9ef5123bdc616 upstream. Recent assembler versions complain about extraneous whitespace inside [] brackets. This fixes all of these instances for the samsung platforms. We should backport this to all kernels that might need to be built with new binutils. arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]' arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages: arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]' arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodesNicolas Ferre
commit c3f0f282d950a1e87496a2633ed9e924e275ff8c upstream. Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used. Indeed the connexion between the DMA engine and the slave is not implemented yet in Device Tree. Note however that this property is also used for PDC (private DMA) on older SoCs. This is why the driver alone cannot determine the validity of this property. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: PXA3xx: program the CSMSADRCFG registerIgor Grinberg
commit d107a204154ddd79339203c2deeb7433f0cf6777 upstream. The Chip Select Configuration Register must be programmed to 0x2 in order to achieve the correct behavior of the Static Memory Controller. Without this patch devices wired to DFI and accessed through SMC cannot be accessed after resume from S2. Do not rely on the boot loader to program the CSMSADRCFG register by programming it in the kernel smemc module. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: 7635/1: versatile: fix the PCI IRQ regressionLinus Walleij
commit e3e92a7be6936dff1de80e66b0b683d54e9e02d8 upstream. The PCI IRQs were regressing due to two things: - The PCI glue layer was using an hard-coded IRQ 27 offset. This caused the immediate regression. - The SIC IRQ mask was inverted (i.e. a bit was indeed set to one for each valid IRQ on the SIC, but accidentally inverted in the init call). This has been around forever, but we have been saved by some other forgiving code that would reserve IRQ descriptors in this range, as the versatile is non-sparse. When the IRQs were bumped up 32 steps so as to avoid using IRQ zero and avoid touching the 16 legacy IRQs, things broke. Introduce an explicit valid mask for the IRQs that are active on the PIC/SIC, and pass that. Use the BIT() macro from <linux/bitops.h> to make sure we hit the right bits, readily defined in <mach/platform.h>. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler.David S. Miller
[ Upstream commit 76968ad2eac6456270353de168b21f04f4b3d1d3 ] When we set the sun4u version of the PTE execute bit, it's: or REG, _PAGE_EXEC_4U, REG _PAGE_EXEC_4U is 0x1000, unfortunately the immedate field of the 'or' instruction is a signed 13-bit value. So the above actually assembles into: or REG, -4096, REG completely corrupting the final PTE value. Set it with a: sethi %hi(_PAGE_EXEC_4U), TMP or REG, TMP, REG sequence instead. This fixes "git gc" crashes on sun4u machines. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix tsb_grow() in atomic context.David S. Miller
[ Upstream commit 0fbebed682ff2788dee58e8d7f7dda46e33aa10b ] If our first THP installation for an MM is via the set_pmd_at() done during khugepaged's collapsing we'll end up in tsb_grow() trying to do a GFP_KERNEL allocation with several locks held. Simply using GFP_ATOMIC in this situation is not the best option because we really can't have this fail, so we'd really like to keep this an order 0 GFP_KERNEL allocation if possible. Also, doing the TSB allocation from khugepaged is a really bad idea because we'll allocate it potentially from the wrong NUMA node in that context. So what we do is defer the hugepage TSB allocation until the first TLB miss we take on a hugepage. This is slightly tricky because we have to handle two unusual cases: 1) Taking the first hugepage TLB miss in the window trap handler. We'll call the winfix_trampoline when that is detected. 2) An initial TSB allocation via TLB miss races with a hugetlb fault on another cpu running the same MM. We handle this by unconditionally loading the TSB we see into the current cpu even if it's non-NULL at hugetlb_setup time. Reported-by: Meelis Roos <mroos@ut.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Handle hugepage TSB being NULL.David S. Miller
[ Upstream commit bcd896bae0166b4443503482a26ecf84d9ba60ab ] Accomodate the possibility that the TSB might be NULL at the point that update_mmu_cache() is invoked. This is necessary because we will sometimes need to defer the TSB allocation to the first fault that happens in the 'mm'. Seperate out the hugepage PTE test into a seperate function so that the logic is clearer. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix gfp_flags setting in tsb_grow().David S. Miller
[ Upstream commit a55ee1ff751f88252207160087d8197bb7538d4c ] We should "|= more_flags" rather than "= more_flags". Reported-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28s390/kvm: Fix store status for ACRS/FPRSChristian Borntraeger
commit 15bc8d8457875f495c59d933b05770ba88d1eacb upstream. On store status we need to copy the current state of registers into a save area. Currently we might save stale versions: The sie state descriptor doesnt have fields for guest ACRS,FPRS, those registers are simply stored in the host registers. The host program must copy these away if needed. We do that in vcpu_put/load. If we now do a store status in KVM code between vcpu_put/load, the saved values are not up-to-date. Lets collect the ACRS/FPRS before saving them. This also fixes some strange problems with hotplug and virtio-ccw, since the low level machine check handler (on hotplug a machine check will happen) will revalidate all registers with the content of the save area. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28xen: Send spinlock IPI to all waitersStefan Bader
commit 76eaca031f0af2bb303e405986f637811956a422 upstream. There is a loophole between Xen's current implementation of pv-spinlocks and the scheduler. This was triggerable through a testcase until v3.6 changed the TLB flushing code. The problem potentially is still there just not observable in the same way. What could happen was (is): 1. CPU n tries to schedule task x away and goes into a slow wait for the runq lock of CPU n-# (must be one with a lower number). 2. CPU n-#, while processing softirqs, tries to balance domains and goes into a slow wait for its own runq lock (for updating some records). Since this is a spin_lock_irqsave in softirq context, interrupts will be re-enabled for the duration of the poll_irq hypercall used by Xen. 3. Before the runq lock of CPU n-# is unlocked, CPU n-1 receives an interrupt (e.g. endio) and when processing the interrupt, tries to wake up task x. But that is in schedule and still on_cpu, so try_to_wake_up goes into a tight loop. 4. The runq lock of CPU n-# gets unlocked, but the message only gets sent to the first waiter, which is CPU n-# and that is busily stuck. 5. CPU n-# never returns from the nested interruption to take and release the lock because the scheduler uses a busy wait. And CPU n never finishes the task migration because the unlock notification only went to CPU n-#. To avoid this and since the unlocking code has no real sense of which waiter is best suited to grab the lock, just send the IPI to all of them. This causes the waiters to return from the hyper- call (those not interrupted at least) and do active spinlocking. BugLink: http://bugs.launchpad.net/bugs/1011792 Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86: Hyper-V: register clocksource only if its advertisedOlaf Hering
commit 32068f6527b8f1822a30671dedaf59c567325026 upstream. Enable hyperv_clocksource only if its advertised as a feature. XenServer 6 returns the signature which is checked in ms_hyperv_platform(), but it does not offer all features. Currently the clocksource is enabled unconditionally in ms_hyperv_init_platform(), and the result is a hanging guest. Hyper-V spec Bit 1 indicates the availability of Partition Reference Counter. Register the clocksource only if this bit is set. The guest in question prints this in dmesg: [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0x70, hints 0x0 This bug can be reproduced easily be setting 'viridian=1' in a HVM domU .cfg file. A workaround without this patch is to boot the HVM guest with 'clocksource=jiffies'. Signed-off-by: Olaf Hering <olaf@aepfle.de> Link: http://lkml.kernel.org/r/1359940959-32168-1-git-send-email-kys@microsoft.com Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Remove reference to alloc_remap()H. Peter Anvin
commit 07f4207a305c834f528d08428df4531744e25678 upstream. We have removed the remap allocator for x86-32, and x86-64 never had it (and doesn't need it). Remove residual reference to it. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/CAE9FiQVn6_QZi3fNQ-JHYiR-7jeDJ5hT0SyT_%2BzVvfOj=PzF3w@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Remove reference to resume_map_numa_kva()H. Peter Anvin
commit bb112aec5ee41427e9b9726e3d57b896709598ed upstream. Remove reference to removed function resume_map_numa_kva(). Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Rip out x86_32 NUMA remapping codeDave Hansen
commit f03574f2d5b2d6229dcdf2d322848065f72953c7 upstream. This code was an optimization for 32-bit NUMA systems. It has probably been the cause of a number of subtle bugs over the years, although the conditions to excite them would have been hard to trigger. Essentially, we remap part of the kernel linear mapping area, and then sometimes part of that area gets freed back in to the bootmem allocator. If those pages get used by kernel data structures (say mem_map[] or a dentry), there's no big deal. But, if anyone ever tried to use the linear mapping for these pages _and_ cared about their physical address, bad things happen. For instance, say you passed __GFP_ZERO to the page allocator and then happened to get handed one of these pages, it zero the remapped page, but it would make a pte to the _old_ page. There are probably a hundred other ways that it could screw with things. We don't need to hang on to performance optimizations for these old boxes any more. All my 32-bit NUMA systems are long dead and buried, and I probably had access to more than most people. This code is causing real things to break today: https://lkml.org/lkml/2013/1/9/376 I looked in to actually fixing this, but it requires surgery to way too much brittle code, as well as stuff like per_cpu_ptr_to_phys(). [ hpa: Cc: this for -stable, since it is a memory corruption issue. However, an alternative is to simply mark NUMA as depends BROKEN rather than EXPERIMENTAL in the X86_32 subclause... ] Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-15Merge tag 'stable/for-linus-3.8-rc7-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes: - A simple bug-fix for redundant NULL check. - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS and two reverts: - Revert the PVonHVM kexec. The patch introduces a regression with older hypervisor stacks, such as Xen 4.1." * tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen PVonHVM: use E820_Reserved area for shared_info" Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info" xen: remove redundant NULL check before unregister_and_remove_pcpu(). x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
2013-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage
2013-02-14Revert "xen PVonHVM: use E820_Reserved area for shared_info"Konrad Rzeszutek Wilk
This reverts commit 9d02b43dee0d7fb18dfb13a00915550b1a3daa9f. We are doing this b/c on 32-bit PVonHVM with older hypervisors (Xen 4.1) it ends up bothing up the start_info. This is bad b/c we use it for the time keeping, and the timekeeping code loops forever - as the version field never changes. Olaf says to revert it, so lets do that. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-14Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info"Konrad Rzeszutek Wilk
This reverts commit a7be94ac8d69c037d08f0fd94b45a593f1d45176. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-13efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameterSatoru Takeuchi
There was a serious problem in samsung-laptop that its platform driver is designed to run under BIOS and running under EFI can cause the machine to become bricked or can cause Machine Check Exceptions. Discussion about this problem: https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 https://bugzilla.kernel.org/show_bug.cgi?id=47121 The patches to fix this problem: efi: Make 'efi_enabled' a function to query EFI facilities 83e68189745ad931c2afd45d8ee3303929233e7f samsung-laptop: Disable on EFI hardware e0094244e41c4d0c7ad69920681972fc45d8ce34 Unfortunately this problem comes back again if users specify "noefi" option. This parameter clears EFI_BOOT and that driver continues to run even if running under EFI. Refer to the document, this parameter should clear EFI_RUNTIME_SERVICES instead. Documentation/kernel-parameters.txt: =============================================================================== ... noefi [X86] Disable EFI runtime services support. ... =============================================================================== Documentation/x86/x86_64/uefi.txt: =============================================================================== ... - If some or all EFI runtime services don't work, you can try following kernel command line parameters to turn off some or all EFI runtime services. noefi turn off all EFI runtime services ... =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com Cc: Matt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.Jan Beulich
This fixes CVE-2013-0228 / XSA-42 Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user in 32bit PV guest can use to crash the > guest with the panic like this: ------------- general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/vbd-51712/block/xvda/dev Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4 mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1 EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0 EIP is at xen_iret+0x12/0x2b EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010 ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0 DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069 Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000) Stack: 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000 Call Trace: Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00 8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40 10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02 EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0 general protection fault: 0000 [#2] ---[ end trace ab0d29a492dcd330 ]--- Kernel panic - not syncing: Fatal exception Pid: 1250, comm: r Tainted: G D --------------- 2.6.32-356.el6.i686 #1 Call Trace: [<c08476df>] ? panic+0x6e/0x122 [<c084b63c>] ? oops_end+0xbc/0xd0 [<c084b260>] ? do_general_protection+0x0/0x210 [<c084a9b7>] ? error_code+0x73/ ------------- Petr says: " I've analysed the bug and I think that xen_iret() cannot cope with mangled DS, in this case zeroed out (null selector/descriptor) by either xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT entry was invalidated by the reproducer. " Jan took a look at the preliminary patch and came up a fix that solves this problem: "This code gets called after all registers other than those handled by IRET got already restored, hence a null selector in %ds or a non-null one that got loaded from a code or read-only data descriptor would cause a kernel mode fault (with the potential of crashing the kernel as a whole, if panic_on_oops is set)." The way to fix this is to realize that the we can only relay on the registers that IRET restores. The two that are guaranteed are the %cs and %ss as they are always fixed GDT selectors. Also they are inaccessible from user mode - so they cannot be altered. This is the approach taken in this patch. Another alternative option suggested by Jan would be to relay on the subtle realization that using the %ebp or %esp relative references uses the %ss segment. In which case we could switch from using %eax to %ebp and would not need the %ss over-rides. That would also require one extra instruction to compensate for the one place where the register is used as scaled index. However Andrew pointed out that is too subtle and if further work was to be done in this code-path it could escape folks attention and lead to accidents. Reviewed-by: Petr Matousek <pmatouse@redhat.com> Reported-by: Petr Matousek <pmatouse@redhat.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-26 08:08:20 +0000