summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-07-28powerpc/powermac: Use sane default baudrate for SCC debuggingBenjamin Herrenschmidt
When using the "sccdbg" option to route early kernel messages and xmon to the SCC serial port on PowerMacs, when this wasn't the configured output port of Open Firmware, we initialize the baudrate to 57600bps. This isn't a very good default on some powermacs where both the FW and pmac_zilog will default to 38400. This fixes it to use the same logic as pmac_zilog to pick a default speed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Show processor cache information in sysfsNathan Lynch
Collect cache information from the OF device tree and display it in the cpu hierarchy in sysfs. This is intended to be compatible at the userspace level with x86's implementation[1], hence some of the funny attribute names. The arrangement of cache info is not immediately intuitive, but (again) it's for compatibility's sake. The cache attributes exposed are: type (Data, Instruction, or Unified) level (1, 2, 3...) size coherency_line_size number_of_sets ways_of_associativity All of these can be derived on platforms that follow the OF PowerPC Processor binding. The code "publishes" only those attributes for which it is able to determine values; attributes for values which cannot be determined are not created at all. [1] arch/x86/kernel/cpu/intel_cacheinfo.c BenH: Turned some printk's into pr_debug, added better NULL checking in a couple of places. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make core id information available to userspaceNathan Lynch
Existing Open Firmware practice is to report each processor core as a separate node in the device tree. Report the value of the "reg" OF property corresponding to a logical CPU's device node as the core_id attribute in /sys/devices/system/cpu/cpu*/topology/core_id. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make core sibling information available to userspaceNathan Lynch
Implement the notion of "core siblings" for powerpc. This makes /sys/devices/system/cpu/cpu*/topology/core_siblings present sensible values, indicating online CPUs which share an L2 cache. BenH: Made cpu_to_l2cache() use of_find_node_by_phandle() instead of IBM-specific open coded search Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/vio: More fallout from dma_mapping_error API changeStephen Rothwell
arch/powerpc/kernel/vio.c:533: error: too few arguments to function 'dma_mapping_error' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/pseries: Fix CMO sysdev attribute API change falloutStephen Rothwell
Noticed due to these wanings: arch/powerpc/platforms/pseries/cmm.c:298: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:299: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Enable tracehook for the architectureRoland McGrath
The powerpc arch code has all the prerequisites, so set HAVE_ARCH_TRACEHOOK. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Add TIF_NOTIFY_RESUME support for tracehookRoland McGrath
This adds TIF_NOTIFY_RESUME support for powerpc. When set, we call tracehook_notify_resume() on the way to user mode. This overloads do_signal() to do the work, but changes its arguments to it has the TIF_* bits handy in a register and drops the useless first argument that was always zero. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make syscall tracing use tracehook.h helpersRoland McGrath
This changes powerpc syscall tracing to use the new tracehook.h entry points. There is no change, only cleanup. In addition, the assembly changes allow do_syscall_trace_enter() to abort the syscall without losing the information about the original r0 value. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Call tracehook_signal_handler() when setting up signal framesRoland McGrath
This makes the powerpc signal handling code call tracehook_signal_handler() after a handler is set up. This means that using PTRACE_SINGLESTEP to enter a signal handler will report to ptrace on the first instruction of the handler, instead of the second. This is consistent with what x86 and other machines do, and what users and debuggers want. BenH: Fixed up the test for the trap value. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Update cpu_sibling_maps dynamicallyNathan Lynch
Rather doing one initialization pass over all the per-cpu cpu_sibling_maps at boot, update the maps at cpu online/offline time. This is a behavior change -- the thread_siblings attribute now reflects only online siblings, whereas it would display offline siblings before. The new behavior matches that of x86, and is arguably more useful. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: register_cpu_online should be __cpuinitNathan Lynch
It is called only in cpu online paths. (caught by CONFIG_DEBUG_SECTION_MISMATCH=y) Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: kill useless SMT code in prom_hold_cpusNathan Lynch
This piece of code is broken for >2 threads, and possibly in some other subtle ways (such as comparing a value obtained from an "ibm,ppc-interrupt-server#s" property to a value obtained from a "reg" property) and doesn't seem to have any useful purpose in the first place other than a dubious warning in case NR_CPUS is too small, which probably isn't the right place to do so. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Fix vio build warningsNathan Lynch
arch/powerpc/kernel/vio.c:1034: warning: function declaration isn’t a prototype arch/powerpc/kernel/vio.c:1035: warning: function declaration isn’t a prototype Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/booke: Clean up the hardware watchpoint supportKumar Gala
* CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Removed duplicated include in stacktrace.cHuang Weiyi
Removed duplicated include file <linux/module.h> in arch/powerpc/kernel/stacktrace.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: some mmc/sd cleanups include/video/atmel_lcdc.h must #include <linux/workqueue.h> avr32: allow system timer to share interrupt to make OProfile work drivers/misc/atmel-ssc.c: Removed duplicated include avr32: Add platform data for AC97C platform device avr32: clean up mci platform code fix avr32 build errors
2008-07-27avr32: some mmc/sd cleanupsDavid Brownell
Minor cleanups for the MMC/SD support on avr32: - Make at32_add_device_mci() properly initialize "missing" platform data ... so boards like STK1002 won't try GPIO 0. - Switch over to gpio_is_valid() instead of testing for only one designated value. - Provide STK1002 platform data for the unlikely case that switches are set so first Ethernet controller isn't in use. (That's the only way to get card detect and writeprotect switch sensing on the STK1000.) And get rid of one "unused variable" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-27Merge commit 'upstream/master'Haavard Skinnemoen
2008-07-27KVM: ppc: fix invalidation of large guest pagesHollis Blanchard
When guest invalidates a large tlb map, there may be more than one corresponding shadow tlb maps that need to be invalidated. Use eaddr and eend to find these shadow tlb maps. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: s390: Fix possible host kernel bug on lctl(g) handlingChristian Borntraeger
The lctl(g) instructions require a specific alignment for the parameters. The architecture requires a specification program check if these alignments are not used. Enforcing this alignment also removes a possible host BUG, since the get_guest functions check for proper alignment and emits a BUG. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: s390: Fix instruction naming for lctlgChristian Borntraeger
Lets fix the name for the lctlg instruction... Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: s390: Fix program check on interrupt delivery handlingChristian Borntraeger
The current interrupt handling on s390 misbehaves on an error case. On s390 each cpu has the prefix area (lowcore) for interrupt delivery. This memory must always be available. If we fail to access the prefix area for a guest on interrupt delivery the configuration is completely unusable. There is no point in sending another program interrupt to an inaccessible lowcore. Furthermore, we should not bug the host kernel, because this can be triggered by userspace. I think the guest kernel itself can not trigger the problem, as SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is available and sane. As this is a userspace bug (e.g. setting the wrong guest offset, unmapping guest memory) we should kill the userspace process instead of BUGing the host kernel. In the long term we probably should notify the userspace process about this problem. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: s390: Change guestaddr type in gaccessMartin Schwidefsky
All registers are unsigned long types. This patch changes all occurences of guestaddr in gaccess from u64 to unsigned long. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: s390: Advertise KVM_CAP_USER_MEMORYCarsten Otte
KVM_CAP_USER_MEMORY is used by s390, therefore, we should advertise it. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: ia64: Fix irq disabling leak in error handling codeJulia Lawall
There is a call to local_irq_restore in the normal exit case, so it would seem that there should be one on an error return as well. The semantic patch that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; expression E,E1,E2; @@ local_irq_save(l); ... when != local_irq_restore(l) when != spin_unlock_irqrestore(E,l) when any when strict ( if (...) { ... when != local_irq_restore(l) when != spin_unlock_irqrestore(E1,l) + local_irq_restore(l); return ...; } | if (...) + {local_irq_restore(l); return ...; + } | spin_unlock_irqrestore(E2,l); | local_irq_restore(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: VMX: Fix undefined beaviour of EPT after reload kvm-intel.koSheng Yang
As well as move set base/mask ptes to vmx_init(). Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: VMX: Fix bypass_guest_pf enabling when disable EPT in module parameterSheng Yang
Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: task switch: translate guest segment limit to virt-extension byte ↵Marcelo Tosatti
granular field If 'g' is one then limit is 4kb granular. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: Avoid instruction emulation when event delivery is pendingAvi Kivity
When an event (such as an interrupt) is injected, and the stack is shadowed (and therefore write protected), the guest will exit. The current code will see that the stack is shadowed and emulate a few instructions, each time postponing the injection. Eventually the injection may succeed, but at that time the guest may be unwilling to accept the interrupt (for example, the TPR may have changed). This occurs every once in a while during a Windows 2008 boot. Fix by unshadowing the fault address if the fault was due to an event injection. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: task switch: use seg regs provided by subarch instead of reading from GDTMarcelo Tosatti
There is no guarantee that the old TSS descriptor in the GDT contains the proper base address. This is the case for Windows installation's reboot-via-triplefault. Use guest registers instead. Also translate the address properly. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: task switch: segment base is linear addressMarcelo Tosatti
The segment base is always a linear address, so translate before accessing guest memory. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-27KVM: SVM: allow enabling/disabling NPT by reloading only the architecture moduleJoerg Roedel
If NPT is enabled after loading both KVM modules on AMD and it should be disabled, both KVM modules must be reloaded. If only the architecture module is reloaded the behavior is undefined. With this patch it is possible to disable NPT only by reloading the kvm_amd module. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-26Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (57 commits) [MTD] [NAND] subpage read feature as a way to increase performance. CPUFREQ: S3C24XX NAND driver frequency scaling support. [MTD][NAND] au1550nd: remove unused variable [MTD] jedec_probe: Fix SST 16-bit chip detection [MTD][MTDPART] Fix a division by zero bug [MTD][MTDPART] Cleanup and document the erase region handling [MTD][MTDPART] Handle most checkpatch findings [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition [MTD] physmap: resume already suspended chips on failure to suspend [MTD] physmap: Fix suspend/resume/shutdown bugs. [MTD] [NOR] Fix -ETIMEO errors in CFI driver [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y [JFFS2] Use .unlocked_ioctl [MTD] Fix const assignment in the MTD command line partitioning driver [MTD] [NOR] gen_probe: No debug message when debugging is disabled [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers [MTD] [MAPS] Remove the bast-flash driver. [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips ...
2008-07-26[PATCH] sanitize __user_walk_fd() et.al.Al Viro
* do not pass nameidata; struct path is all the callers want. * switch to new helpers: user_path_at(dfd, pathname, flags, &path) user_path(pathname, &path) user_lpath(pathname, &path) user_path_dir(pathname, &path) (fail if not a directory) The last 3 are trivial macro wrappers for the first one. * remove nameidata in callers. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, AMD IOMMU: include amd_iommu_last_bdf in device initialization x86: fix IBM Summit based systems' phys_cpu_present_map on 32-bit kernels x86, RDC321x: remove gpio.h complications x86, RDC321x: add to mach-default crashdump: fix undefined reference to `elfcorehdr_addr' flag parameters: fix compile error of sys_epoll_create1
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin arch: If we double fault, rather than hang forever, reset Blackfin arch: When icache is off, make sure people know it Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging. Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines Blackfin arch: fix bug - IMDMA is not type struct dma_register Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks Blackfin arch: Apply Bluetechnix CM-BF527 board support patch Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer Blackfin arch: Add ISP1760 board resources to BF548-EZKIT Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version Blackfin arch: add missing IORESOURCE_MEM flags to UART3 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC(). Blackfin arch: Extend sram malloc to handle L2 SRAM. Blackfin arch: Remove useless config option. Blackfin arch: change L1 malloc to base on slab cache and lists. Blackfin arch: use local labels and ENDPROC() markings Blackfin arch: Do not need this dualcore test module in kernel. Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM. Blackfin arch: Add ANOMALY_05000368 workaround Blackfin arch: Functional power management support ...
2008-07-26cris: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26frv: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() where show_mem() calls show_free_areas(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26m32r: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26m68k: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26m68knommu: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26mips: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). And show_mem() does now actually print something on configurations with multiple nodes. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26h8300: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26mn10300: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26powerpc: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26s390: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26sh: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in slab, printed by show_free_areas() - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26sparc64: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() - dirty pages, writeback pages, mapped pages, slab pages, pagetables pages, printed by show_free_areas() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26um: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 17:33:09 +0000