summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-04-12powerpc: Don't try to set LPCR unless we're in hypervisor modePaul Mackerras
Commit 8f619b5429d9 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12Merge tag 'blackfin-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
2014-04-12Merge tag 'llvmlinux-for-v3.15' of ↵Linus Torvalds
git://git.linuxfoundation.org/llvmlinux/kernel Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-12blackfin: cleanup board filesSteven Miao
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE) Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12bf609: clock: drop unused clock bit set/clear functionsSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12Blackfin: bf537: rename "CONFIG_ADT75"Paul Bolle
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed as an IIO driver and support for it was added to the LM75 HWMON driver. But it was apparently overlooked to rename one reference to CONFIG_ADT75 to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-12Blackfin: bf537: rename "CONFIG_AD7314"Paul Bolle
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed as an IIO driver and added as a HWMON driver. But it was apparently overlooked to rename two references to CONFIG_AD7314 to CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-12Blackfin: bf537: rename ad2s120x ->ad2s1200Paul Bolle
In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from ad2s120x to ad2s1200. But it apparently forgot to rename the references to this driver in the BF537-STAMP code. Rename these now, and use the IS_ENABLED() macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-12blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE"Paul Bolle
There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it once and for all by using IS_ENABLED(), which is designed to avoid issues like this. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-12blackfin: dma: current count mmr is read onlySonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2014-04-12bfin_crc: Move architecture independant crc header file out of the blackfin ↵Sonic Zhang
folder. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12bf54x: drop unuesd HOST status,control,timeout registers bit define macrosSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12blackfin: portmux: cleanup head fileSteven Miao
drop unused head file change pinmux request/free macro for backward compatiblity add function declaration Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-11Merge tag 'pm+acpi-3.15-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management fixes and updates from Rafael Wysocki: "This is PM and ACPI material that has emerged over the last two weeks and one fix for a CPU hotplug regression introduced by the recent CPU hotplug notifiers registration series. Included are intel_idle and turbostat updates from Len Brown (these have been in linux-next for quite some time), a new cpufreq driver for powernv (that might spend some more time in linux-next, but BenH was asking me so nicely to push it for 3.15 that I couldn't resist), some cpufreq fixes and cleanups (including fixes for some silly breakage in a couple of cpufreq drivers introduced during the 3.14 cycle), assorted ACPI cleanups, wakeup framework documentation fixes, a new sysfs attribute for cpuidle and a new command line argument for power domains diagnostics. Specifics: - Fix for a recently introduced CPU hotplug regression in ARM KVM from Ming Lei. - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32 cpufreq drivers introduced during the 3.14 cycle (-stable material) from Chen Gang and Viresh Kumar. - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits from Gautham R Shenoy and Srivatsa S Bhat. - Exynos cpufreq driver fix preventing it from being included into multiplatform builds that aren't supported by it from Sachin Kamat. - cpufreq cleanups related to the usage of the driver_data field in struct cpufreq_frequency_table from Viresh Kumar. - cpufreq ppc driver cleanup from Sachin Kamat. - Intel BayTrail support for intel_idle and ACPI idle from Len Brown. - Intel CPU model 54 (Atom N2000 series) support for intel_idle from Jan Kiszka. - intel_idle fix for Intel Ivy Town residency targets from Len Brown. - turbostat updates (Intel Broadwell support and output cleanups) from Len Brown. - New cpuidle sysfs attribute for exporting C-states' target residency information to user space from Daniel Lezcano. - New kernel command line argument to prevent power domains enabled by the bootloader from being turned off even if they are not in use (for diagnostics purposes) from Tushar Behera. - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven. - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler Paul. - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi, Zhihui Zhang, Hanjun Guo" * tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) ACPI: Update the ACPI spec information in Kconfig arm, kvm: fix double lock on cpu_add_remove_lock cpuidle: sysfs: Export target residency information cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes PM / domains: Add pd_ignore_unused to keep power domains enabled ACPI / dock: Drop dock_device_ids[] table ACPI / video: Favor native backlight interface for ThinkPad Helix ACPI / thermal: Fix wrong variable usage in debug statement ...
2014-04-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pullx86 core platform updates from Peter Anvin: "This is the x86/platform branch with the objectionable IOSF patches removed. What is left is proper memory handling for Intel GPUs, and a change to the Calgary IOMMU code which will be required to make kexec work sanely on those platforms after some upcoming kexec changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, calgary: Use 8M TCE table size by default x86/gpu: Print the Intel graphics stolen memory range x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms x86/gpu: Add vfunc for Intel graphics stolen memory base address
2014-04-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This is a collection of minor fixes for x86, plus the IRET information leak fix (forbid the use of 16-bit segments in 64-bit mode)" NOTE! We may have to relax the "forbid the use of 16-bit segments in 64-bit mode" part, since there may be people who still run and depend on 16-bit Windows binaries under Wine. But I'm taking this in the current unconditional form for now to see who (if anybody) screams bloody murder. Maybe nobody cares. And maybe we'll have to update it with some kind of runtime enablement (like our vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already need to tweak). * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels efi: Pass correct file handle to efi_file_{read,close} x86/efi: Correct EFI boot stub use of code32_start x86/efi: Fix boot failure with EFI stub x86/platform/hyperv: Handle VMBUS driver being a module x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround x86, CMCI: Add proper detection of end of CMCI storms
2014-04-11Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull second set of ARM changes from Russell King: "This is the remainder of the ARM changes for this merge window. Included in this request are: - fixes for kprobes for big-endian support - fix tracing in soft_restart - avoid phys address overflow in kdump code - fix reporting of read-only pmd bits in kernel page table dump - remove unnecessary (and possibly buggy) call to outer_flush_all() - fix a three sparse warnings (missing header file for function prototypes) - fix pj4 crashing single zImage (thanks to arm-soc merging changes which enables this with knowledge that the corresponding fix had not even been submitted for my tree before the merge window opened) - vfp macro cleanups - dump register state on undefined instruction userspace faults when debugging" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: Dump the registers on undefined instruction userspace faults ARM: 8018/1: Add {inc,dec}_preempt_count asm macros ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h ARM: 8016/1: Check cpu id in pj4_cp0_init. ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7 ARM: add missing system_misc.h include to process.c ARM: 8009/1: dcscb.c: remove call to outer_flush_all() ARM: 8014/1: mm: fix reporting of read-only PMD bits ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr ARM: 8010/1: avoid tracers in soft_restart ARM: kprobes-test: Workaround GAS .align bug ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses ARM: probes: fix instruction fetch order with <asm/opcodes.h>
2014-04-11Merge tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull Microblaze updates from Michal Simek: - use asm-generic/io.h and fix intc/timer code - clean platform handling - enable some syscalls * tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Use asm-generic/io.h microblaze: Remove platform folder microblaze: Remove generic platform microblaze: Sort Kconfig options microblaze: Move DTS file to common location at boot/dts folder microblaze: Fix compilation failure because of release_thread microblaze: Fix sparse warning because of missing cpu.h header microblaze: Make timer driver endian aware microblaze: Make intc driver endian aware microblaze: Wire-up new system calls sched_setattr/getattr microblaze: Wire-up preadv/pwritev in syscall table microblaze: Enable pselect6 syscall microblaze: Drop architecture-specific declaration of early_printk microblaze: Rename global function heartbeat()
2014-04-11x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernelsH. Peter Anvin
The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 32-bit mode. Since 16-bit support is somewhat crippled anyway on a 64-bit kernel (no V86 mode), and most (if not quite all) 64-bit processors support virtualization for the users who really need it, simply reject attempts at creating a 16-bit segment when running on top of a 64-bit kernel. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org Cc: <stable@vger.kernel.org>
2014-04-11Blackfin: remove "config IP_CHECKSUM_L1"Paul Bolle
The only user of Kconfig symbol IP_CHECKSUM_L1 got removed in v2.6.33, with commit ddf9ddacef0989fdeb22e182212a232488f0f3ad ("Blackfin: convert to generic checksum code"). We can remove the Kconfig entry for this unused symbol now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-11blackfin: Remove GENERIC_GPIO config option againPaul Bolle
The Kconfig symbol GENERIC_GPIO was removed in v3.10. Nothing cares about it anymore. It popped up somehow in v3.13, so it can be removed again. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-11blackfin:Use generic /proc/interrupts implementationThomas Gleixner
There is nothing special in that blackfin code. Use the core implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Miao <realmz6@gmail.com> Cc: bfin <adi-buildroot-devel@lists.sourceforge.net>
2014-04-11blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-11Merge branch 'devel-stable' into for-nextRussell King
2014-04-11Merge branches 'fixes' and 'misc' into for-nextRussell King
2014-04-11Dump the registers on undefined instruction userspace faultsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-11Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: "* Fix EFI boot regression introduced during the merge window where the firmware was reading random values from the stack because we were passing a pointer to the wrong object type. * Kernel corruption has been reported when booting with the EFI boot stub which was tracked down to setting a bogus value for bp->hdr.code32_start, resulting in corruption during relocation. * Olivier Martin reported that the wrong file handles were being passed to efi_file_(read|close), which works for x86 by luck due to the way that the FAT driver is implemented, but doesn't work on ARM." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-10x86, calgary: Use 8M TCE table size by defaultWANG Chao
New kexec-tools wants to pass kdump kernel needed memmap via E820 directly, instead of memmap=exactmap. This makes saved_max_pfn not be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using the same TCE table size, Muli suggest to hard code the size to max (8M). We can't get rid of saved_max_pfn this time, for backward compatibility with old first kernel and new second kernel. However new first kernel and old second kernel can not work unfortunately. v2->v1: - retain saved_max_pfn so new 2nd kernel can work with old 1st kernel from Vivek Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Jon Mason <jdmason@kudzu.us> Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-10efi: Pass correct file handle to efi_file_{read,close}Matt Fleming
We're currently passing the file handle for the root file system to efi_file_read() and efi_file_close(), instead of the file handle for the file we wish to read/close. While this has worked up until now, it seems that it has only been by pure luck. Olivier explains, "The issue is the UEFI Fat driver might return the same function for 'fh->read()' and 'h->read()'. While in our case it does not work with a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our case, we return a different pointer when reading a directory and reading a file." Fixing this actually clears up the two functions because we can drop one of the arguments, and instead only pass a file 'handle' argument. Reported-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10x86/efi: Correct EFI boot stub use of code32_startMatt Fleming
code32_start should point at the start of the protected mode code, and *not* at the beginning of the bzImage. This is much easier to do in assembly so document that callers of make_boot_params() need to fill out code32_start. The fallout from this bug is that we would end up relocating the image but copying the image at some offset, resulting in what appeared to be memory corruption. Reported-by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10x86/efi: Fix boot failure with EFI stubMatt Fleming
commit 54b52d872680 ("x86/efi: Build our own EFI services pointer table") introduced a regression because the 64-bit file_size() implementation passed a pointer to a 32-bit data object, instead of a pointer to a 64-bit object. Because the firmware treats the object as 64-bits regardless it was reading random values from the stack for the upper 32-bits. This resulted in people being unable to boot their machines, after seeing the following error messages, Failed to get file info size Failed to alloc highmem for files Reported-by: Dzmitry Sledneu <dzmitry.sledneu@gmail.com> Reported-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: - New driver for Qcom bam dma - New driver for RCAR peri-peri - New driver for FSL eDMA - Various odd fixes and updates thru the subsystem * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) dmaengine: add Qualcomm BAM dma driver shdma: add R-Car Audio DMAC peri peri driver dmaengine: sirf: enable generic dt binding for dma channels dma: omap-dma: Implement device_slave_caps callback dmaengine: qcom_bam_dma: Add device tree binding dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. dma: dw: allocate memory in two stages in probe Add new line to test result strings produced in verbose mode dmaengine: pch_dma: use tasklet_kill in teardown dmaengine: at_hdmac: use tasklet_kill in teardown dma: cppi41: start tear down only if channel is busy usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated dmaengine: s3c24xx-dma: make phy->irq signed for error handling dma: imx-dma: Add missing module owner field dma: imx-dma: Replace printk with dev_* dma: fsl-edma: fix static checker warning of NULL dereference dma: Remove comment about embedding dma_slave_config into custom structs dma: mmp_tdma: move to generic device tree binding dma: mmp_pdma: add IRQF_SHARED when request irq dma: edma: Fix memory leak in edma_prep_dma_cyclic() ...
2014-04-09x86 kbuild: LLVMLinux: More cc-options added for clangJan-Simon Möller
Protect more options for x86 with cc-option so that we don't get errors when using clang instead of gcc. Add more or different options when using clang as well. Also need to enforce that SSE is off for clang and the stack is 8-byte aligned. Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Behan Webster <behanw@converseincode.com> Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2014-04-09Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Here is the pull request from the i2c subsystem. It got a little delayed because I needed to wait for a dependency to be included (commit b424080a9e08: "reset: Add optional resets and stubs"). Plus, I had some email problems. All done now, the highlights are: - drivers can now deprecate their use of i2c classes. That shouldn't be used on embedded platforms anyhow and was often blindly copy&pasted. This mechanism gives users time to switch away and ultimately boot faster once the use of classes for those drivers is gone for good. - new drivers for QUP, Cadence, efm32 - tracepoint support for I2C and SMBus - bigger cleanups for the mv64xxx, nomadik, and designware drivers And the usual bugfixes, cleanups, feature additions. Most stuff has been in linux-next for a while. Just some hot fixes and new drivers were added a bit more recently." * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (63 commits) i2c: cadence: fix Kconfig dependency i2c: Add driver for Cadence I2C controller i2c: cadence: Document device tree bindings Documentation: i2c: improve section about flags mangling the protocol i2c: qup: use proper type fro clk_freq i2c: qup: off by ones in qup_i2c_probe() i2c: efm32: fix binding doc MAINTAINERS: update I2C web resources i2c: qup: New bus driver for the Qualcomm QUP I2C controller i2c: qup: Add device tree bindings information i2c: i2c-xiic: deprecate class based instantiation i2c: i2c-sirf: deprecate class based instantiation i2c: i2c-mv64xxx: deprecate class based instantiation i2c: i2c-designware-platdrv: deprecate class based instantiation i2c: i2c-davinci: deprecate class based instantiation i2c: i2c-bcm2835: deprecate class based instantiation i2c: mv64xxx: Fix reset controller handling i2c: omap: fix usage of IS_ERR_VALUE with pm_runtime_get_sync i2c: efm32: new bus driver i2c: exynos5: remove unnecessary cast of void pointer ...
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-09Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are a few more powerpc things for you. So you'll find here the conversion of the two new firmware sysfs interfaces to the new API for self-removing files that Greg and Tejun introduced, so they can finally remove the old one. I'm also reverting the hwmon driver for powernv. I shouldn't have merged it, I got a bit carried away here. I hadn't realized it was never CCed to the relevant maintainer(s) and list(s), and happens to have some issues so I'm taking it out and it will come back via the proper channels. The rest is a bunch of LE fixes (argh, some of the new stuff was broken on LE, I really need to start testing LE myself !) and various random fixes here and there. Finally one bit that's not strictly a fix, which is the HVC OPAL change to "kick" the HVC thread when the firmware tells us there is new incoming data. I don't feel like waiting for this one, it's simple enough, and it makes a big difference in console responsiveness which is good for my nerves" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (26 commits) powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_self Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature" power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules. arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.c powerpc/opal: Add missing include powerpc: Convert last uses of __FUNCTION__ to __func__ powerpc: Add lq/stq emulation powerpc/powernv: Add invalid OPAL call powerpc/powernv: Add OPAL message log interface powerpc/book3s: Fix mc_recoverable_range buffer overrun issue. powerpc: Remove dead code in sycall entry powerpc: Use of_node_init() for the fakenode in msi_bitmap.c powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast() powerpc/powernv: Fix endian issues with sensor code powerpc/powernv: Fix endian issues with OPAL async code tty/hvc_opal: Kick the HVC thread on OPAL console events powerpc/powernv: Add opal_notifier_unregister() and export to modules powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early powerpc/ppc64: Gracefully handle early interrupts ...
2014-04-09ARM: 8018/1: Add {inc,dec}_preempt_count asm macrosCatalin Marinas
The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti (which also gets the current thread_info) instead of open-coding them in arch/arm/vfp/*.S files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-09ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.hCatalin Marinas
asm/assembler.h is a better place for this macro since it is used by asm files outside arch/arm/kernel/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-09powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_selfStewart Smith
We are currently using sysfs_schedule_callback() which is deprecated and about to be removed. Switch to the new interface instead. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09power, sched: stop updating inside arch_update_cpu_topology() when nothing ↵Michael Wang
to be update Since v1: Edited the comment according to Srivatsa's suggestion. During the testing, we encounter below WARN followed by Oops: WARNING: at kernel/sched/core.c:6218 ... NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200 LR [c000000000101358] .build_sched_domains+0xec8/0x1200 PACATMSCRATCH [800000000000f032] Call Trace: [c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0 LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200 PACATMSCRATCH [8000000000029032] Call Trace: [c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0 [c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... This was caused by that 'sd->groups == NULL' after building groups, which was caused by the empty 'sd->span'. The cpu's domain contained nothing because the cpu was assigned to a wrong node, due to the following unfortunate sequence of events: 1. The hypervisor sent a topology update to the guest OS, to notify changes to the cpu-node mapping. However, the update was actually redundant - i.e., the "new" mapping was exactly the same as the old one. 2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting the 'for-loop' in arch_update_cpu_topology(). 3. So we ended up calling stop-machine() with an empty cpumask list, which made stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as the cpu to run the payload (the update_cpu_topology() function). 4. This causes update_cpu_topology() to be run by CPU0. And since 'updates' is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology() finds update->cpu as well as update->new_nid to be 0. In other words, we end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly. Along with the following wrong updating, it causes the sched-domain rebuild code to break and crash the system. Fix this by skipping the topology update in cases where we find that the topology has not actually changed in reality (ie., spurious updates). CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Nathan Fontenot <nfont@linux.vnet.ibm.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Andrew Morton <akpm@linux-foundation.org> CC: Robert Jennings <rcj@linux.vnet.ibm.com> CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com> CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> CC: Alistair Popple <alistair@popple.id.au> Suggested-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules.Tony Breeds
When building modules with a native le toolchain the linker will generate R_PPC64_TOCSAVE relocations when it's safe to omit saving r2 on a plt call. This isn't helpful in the conext of a kernel module and the kernel will fail to load those modules with an error like: nf_conntrack: Unknown ADD relocation: 109 This patch tells the linker to avoid createing R_PPC64_TOCSAVE relocations allowing modules to load. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.cMonam Agarwal
Here rcu_assign_pointer() is ensuring that the initialization of a structure is carried out before storing a pointer to that structure. So, rcu_assign_pointer(p, NULL) can always safely be converted to RCU_INIT_POINTER(p, NULL). Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/opal: Add missing includeMichael Neuling
next-20140324 currently fails compiling celleb_defconfig with: arch/powerpc/include/asm/opal.h:894:42: error: 'struct notifier_block' declared inside parameter list [-Werror] arch/powerpc/include/asm/opal.h:894:42: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] arch/powerpc/include/asm/opal.h:896:14: error: 'struct notifier_block' declared inside parameter list [-Werror] This is due to a missing include which is added here. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Convert last uses of __FUNCTION__ to __func__Joe Perches
Just about all of these have been converted to __func__, so convert the last uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Add lq/stq emulationAnton Blanchard
Recent CPUs support quad word load and store instructions. Add support to the alignment handler for them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Add invalid OPAL callJoel Stanley
This call will not be understood by OPAL, and cause it to add an error to it's log. Among other things, this is useful for testing the behaviour of the log as it fills up. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Add OPAL message log interfaceJoel Stanley
OPAL provides an in-memory circular buffer containing a message log populated with various runtime messages produced by the firmware. Provide a sysfs interface /sys/firmware/opal/msglog for userspace to view the messages. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/book3s: Fix mc_recoverable_range buffer overrun issue.Mahesh Salgaonkar
Currently we wrongly allocate mc_recoverable_range buffer (to hold recoverable ranges) based on size of the property "mcheck-recoverable-ranges". This results in allocating less memory to hold available recoverable range entries from /proc/device-tree/ibm,opal/mcheck-recoverable-ranges. This patch fixes this issue by allocating mc_recoverable_range buffer based on number of entries of recoverable ranges instead of device property size. Without this change we end up allocating less memory and run into memory corruption issue. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>