| Age | Commit message (Collapse) | Author |
|---|
|
The GCC_LPASS_Q6_AXI_CLK and GCC_LPASS_SWAY_CLK clocks may not be
touched on a typical UEFI based SDM845 device, but when the kernel is
built with CONFIG_SDM_LPASSCC_845 this happens, unless they are marked
as protected-clocks in the DT.
This was done for the MTP and the Pocophone, but not for DB845c and the
Lenovo Yoga C630 - causing these to fail to boot if the LPASS clock
controller is enabled (which it typically isn't).
Tested-by: Vinod Koul <vkoul@kernel.org> #on db845c
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201222001103.3112306-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The patch fix commit: ad5d112 ("riscv: use vDSO common flow to
reduce the latency of the time-related functions").
The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL
or vgettimeofday won't work.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Use raw_smp_processor_id instead of smp_processor_id() to fix warning,
BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is debug_smp_processor_id+0x1c/0x26
CPU: 0 PID: 1 Comm: init Not tainted 5.10.0-rc4 #211
Call Trace:
walk_stackframe+0x0/0xaa
show_stack+0x32/0x3e
dump_stack+0x76/0x90
check_preemption_disabled+0xaa/0xac
debug_smp_processor_id+0x1c/0x26
get_cache_size+0x18/0x68
load_elf_binary+0x868/0xece
bprm_execve+0x224/0x498
kernel_execve+0xdc/0x142
run_init_process+0x90/0x9e
try_to_run_init_process+0x12/0x3c
kernel_init+0xb4/0xf8
ret_from_exception+0x0/0xc
The issue is found when CONFIG_DEBUG_PREEMPT enabled.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: Added a comment.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
We should call irq trace only if interrupt is going to be enabled during
excecption handling. Otherwise, it results in following warning during
boot with lock debugging enabled.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] DEBUG_LOCKS_WARN_ON(early_boot_irqs_disabled)
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:4085 lockdep_hardirqs_on_prepare+0x22a/0x22e
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #548
[ 0.000000] epc: c005d5d4 ra : c005d5d4 sp : c1c01e80
[ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : 00000000
[ 0.000000] t1 : ffffffff t2 : 00000000 s0 : c1c01ea0
[ 0.000000] s1 : c100f360 a0 : 0000002d a1 : c00666ee
[ 0.000000] a2 : 00000000 a3 : 00000000 a4 : 00000000
[ 0.000000] a5 : 00000000 a6 : c1c6b390 a7 : 3ffff00e
[ 0.000000] s2 : c2384fe8 s3 : 00000000 s4 : 00000001
[ 0.000000] s5 : c1c0a980 s6 : c1d48000 s7 : c1613b4c
[ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40
[ 0.000000] s11: 00000000 t3 : 00000000 t4 : 00000000
[ 0.000000] t5 : 00000001 t6 : 00000000
Fixes: 3c4697982982 ("riscv:Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
When the compiler choses to not inline the trivial MSR helpers:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xce: call to __wrmsr.constprop.14() leaves .noinstr.text section
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/X/bf3gV+BW7kGEsB@hirez.programming.kicks-ass.net
|
|
There's some explicit tracing left in exc_machine_check_kernel(),
remove it, as it's already implied by irqentry_nmi_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.719310466@infradead.org
|
|
When the compiler fails to inline, it violates nonisntr:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xc7: call to sev_es_wr_ghcb_msr() leaves .noinstr.text section
Fixes: 4ca68e023b11 ("x86/sev-es: Handle NMI State")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.532902065@infradead.org
|
|
vmlinux.o: warning: objtool: __do_fast_syscall_32()+0x47: call to syscall_enter_from_user_mode_work() leaves .noinstr.text section
Fixes: 4facb95b7ada ("x86/entry: Unbreak 32bit fast syscall")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.472696632@infradead.org
|
|
With the introduction of a dynamic ZONE_DMA range based on DT or IORT
information, there's no need for CMA allocations from the wider
ZONE_DMA32 since on most platforms ZONE_DMA will cover the 32-bit
addressable range. Remove the arm64_dma32_phys_limit and set
arm64_dma_phys_limit to cover the smallest DMA range required on the
platform. CMA allocation and crashkernel reservation now go in the
dynamically sized ZONE_DMA, allowing correct functionality on RPi4.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> # On RPi4B
|
|
The definition if xchg() causes a harmless warning in some files, like:
In file included from ../arch/ia64/include/uapi/asm/intrinsics.h:22,
from ../arch/ia64/include/asm/intrinsics.h:11,
from ../arch/ia64/include/asm/bitops.h:19,
from ../include/linux/bitops.h:32,
from ../include/linux/kernel.h:11,
from ../fs/nfs/read.c:12:
../fs/nfs/read.c: In function 'nfs_read_completion':
../arch/ia64/include/uapi/asm/cmpxchg.h:57:2: warning: value computed is not used [-Wunused-value]
57 | ((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/nfs/read.c:196:5: note: in expansion of macro 'xchg'
196 | xchg(&nfs_req_openctx(req)->error, error);
| ^~~~
Change it to a compound expression like the other architectures have
to get a clean defconfig build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A cleanup patch from my legacy timer series broke ia64 and led
to RCU stall errors and a fast system clock:
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
[ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Revert most of my patch to make this work again, including the extra
update_process_times()/profile_tick() and the local_irq_enable() in the
loop that I expected not to be needed here.
I have not found out exactly what goes wrong, and would suggest that
someone with hardware access tries to convert this code into a singleshot
clockevent driver, which should give better behavior in all cases.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Fixes: 2b49ddcef297 ("ia64: convert to legacy_timer_tick")
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Set the maximum DIE per package variable on AMD using the
NodesPerProcessor topology value. This will be used by RAPL, among
others, to determine the maximum number of DIEs on the system in order
to do per-DIE manipulations.
[ bp: Productize into a proper patch. ]
Fixes: 028c221ed190 ("x86/CPU/AMD: Save AMD NodeId as cpu_die_id")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Reported-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Tested-by: Rafael Kitover <rkitover@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210939
Link: https://lkml.kernel.org/r/20210106112106.GE5729@zn.tnic
Link: https://lkml.kernel.org/r/20210111101455.1194-1-bp@alien8.de
|
|
This is a bug that causes early crashes in builds with an .exit.text
section smaller than a page and an .init.text section that ends in the
beginning of a physical page (this is kinda random, which might
explain why this wasn't really encountered before).
The init sections are ordered like this:
.init.text
.exit.text
.init.data
Currently, these sections aren't page aligned.
Because the init code might become read-only at runtime and because
the .init.text section can potentially reside on the same physical
page as .init.data, the beginning of .init.data might be mapped
read-only along with .init.text.
Then when the kernel tries to modify a variable in .init.data (like
kthreadd_done, used in kernel_init()) the kernel panics.
To avoid this, make _einittext page aligned and also align .exit.text
to make sure .init.data is always seperated from the text segments.
Fixes: 060ef9d89d18 ("powerpc32: PAGE_EXEC required for inittext")
Signed-off-by: Ariel Marcovitch <ariel.marcovitch@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210102201156.10805-1-ariel.marcovitch@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fix kexec panic/hang (Dexuan Cui)
- fix occasional crashes when flushing TLB (Wei Liu)
* tag 'hyperv-fixes-signed-20210111' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: check cpu mask after interrupt has been disabled
x86/hyperv: Fix kexec panic/hang issues
|
|
Don't assume dest/source buffers are userspace addresses when manually
copying data for string I/O or MOVS MMIO, as {get,put}_user() will fail
if handed a kernel address and ultimately lead to a kernel panic.
When invoking INSB/OUTSB instructions in kernel space in a
SEV-ES-enabled VM, the kernel crashes with the following message:
"SEV-ES: Unsupported exception in #VC instruction emulation - can't continue"
Handle that case properly.
[ bp: Massage commit message. ]
Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Hyunwook (Wooky) Baek <baekhw@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20210110071102.2576186-1-baekhw@google.com
|
|
2 regulator descriptions carry identical naming.
This leads to following boot warning:
[ 0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present!
Fix this by renaming the one used for audio.
Fixes: 5051bff33102 ("ARM: dts: imx: ventana: add LTC3676 PMIC support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix typo so the gpio i2c busses are really disabled.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
to be consistent with kernel versions up to v5.9 (mmc aliases not used here).
usdhc1 is not wired up on this board and therefore cannot be used.
Start mmc aliases with usdhc2.
Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Address the 2nd boot failure due to snafu in signal handling code
(first was generic console ttynull issue)
- misc other fixes
* tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [hsdk]: Enable FPU_SAVE_RESTORE
ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling
include/soc: remove headers for EZChip NPS
arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for machine check handling with VMAP stack on 32-bit.
- A clang build fix.
Thanks to Christophe Leroy and Nathan Chancellor.
* tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Handle .text.{hot,unlikely}.* in linker script
powerpc/32s: Fix RTAS machine check with VMAP stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As expected, fixes started trickling in after the holidays so here is
the accumulated pile of x86 fixes for 5.11:
- A fix for fanotify_mark() missing the conversion of x86_32 native
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page()
where a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and
not the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper
MTRR type, when the end address is the same as top of memory.
(Ying-Tsun Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)"
* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't move a task to the same resource group
x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
x86/mtrr: Correct the range check before performing MTRR type lookups
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
x86/mm: Fix leak of pmd ptlock
fanotify: Fix sys_fanotify_mark() on native x86-32
|
|
The offset of the reset request register is 0, the absolute address is
0x1e60000. Boards without PSCI support will fail to perform a reset:
[ 26.734700] reboot: Restarting system
[ 27.743259] Unable to restart system
[ 27.746845] Reboot failed -- System halted
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
commit b91540d52a08 ("RISC-V: Add EFI runtime services") add
a duplicated PAGE_KERNEL_EXEC, kill it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
It recently became apparent that the lack of a 'device_type = "pci"'
in the PCIe root complex node for rk3399 is a violation of the PCI
binding, as documented in IEEE Std 1275-1994. Changes to the kernel's
parsing of the DT made such violation fatal, as drivers cannot
probe the controller anymore.
Add the missing property makes the PCIe node compliant. While we
are at it, drop the pointless linux,pci-domain property, which only
makes sense when there are multiple host bridges.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200815125112.462652-3-maz@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
On Pinebook Pro laptops with an NVMe SSD installed, prevent random
crashes in the NVMe driver by not attempting to use a PCIe link speed
higher than that supported by the RK3399 SoC.
See commit 712fa1777207 ("arm64: dts: rockchip: add max-link-speed for
rk3399").
Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Simon South <simon@simonsouth.net>
Link: https://lore.kernel.org/r/20200930185627.5918-1-simon@simonsouth.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The vop-mmu shares the irq with its matched vop but not the vpu.
Fixes: 7053e06b1422 ("arm64: dts: rockchip: add core dtsi file for PX30 SoCs")
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20210108110627.3231226-1-heiko@sntech.de
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a small number of bug fixes that all came in before or
during the merge window, most for the omap platform:
- One boot regression fix for Nokia N9 (OMAP3).
- Two small defconfig changes for omap2, to reflect changes in
drivers
- Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs.
The picoxcell platform will be removed in v5.12, but fixing it
first makes it easier to backport to the fix to stable kernels and
get a clean build with new dtc versions"
* tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: picoxcell: fix missing interrupt-parent properties
ARM: dts: ux500/golden: Set display max brightness
arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios"
ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875
ARM: omap2plus_defconfig: enable SPI GPIO
ARM: OMAP2+: omap_device: fix idling of devices during probe
ARM: dts: OMAP3: disable AES on N950/N9
ARM: omap2plus_defconfig: drop unused POWER_AVS option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Clean-ups following the merging window: remove unused variable,
duplicate includes, superfluous barrier, move some inline asm to
separate functions.
- Disable top-byte-ignore on kernel code addresses with KASAN/MTE
enabled (already done when MTE is disabled).
- Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled.
- Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr
instead of --no-eh-frame-hdr.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Move PSTATE.TCO setting to separate functions
arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled
arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr
arm64: traps: remove duplicate include statement
arm64: link with -z norelro for LLD or aarch64-elf
arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA
arm64: mte: remove an ISB on kernel exit
arm64/smp: Remove unused irq variable in arch_show_interrupts()
|
|
HSDK has hardware floating point and the common use case is with
glibc+hf so enable that as default.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a functional bug in arm/chacha-neon as well as a potential
buffer overflow in ecdh"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
crypto: arm/chacha-neon - add missing counter increment
|
|
dtc points out that the interrupts for some devices are not parsable:
picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent
There are two VIC instances, so it's not clear which one needs to be
used. I found the BSP sources that reference VIC0, so use that:
https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #1
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
|
|
Shakeel Butt reported in [1] that a user can request a task to be moved
to a resource group even if the task is already in the group. It just
wastes time to do the move operation which could be costly to send IPI
to a different CPU.
Add a sanity check to ensure that the move operation only happens when
the task is not already in the resource group.
[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
|
|
Currently, when moving a task to a resource group the PQR_ASSOC MSR is
updated with the new closid and rmid in an added task callback. If the
task is running, the work is run as soon as possible. If the task is not
running, the work is executed later in the kernel exit path when the
kernel returns to the task again.
Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task
is running is the right thing to do. Queueing work for a task that is
not running is unnecessary (the PQR_ASSOC MSR is already updated when
the task is scheduled in) and causing system resource waste with the way
in which it is implemented: Work to update the PQR_ASSOC register is
queued every time the user writes a task id to the "tasks" file, even if
the task already belongs to the resource group.
This could result in multiple pending work items associated with a
single task even if they are all identical and even though only a single
update with most recent values is needed. Specifically, even if a task
is moved between different resource groups while it is sleeping then it
is only the last move that is relevant but yet a work item is queued
during each move.
This unnecessary queueing of work items could result in significant
system resource waste, especially on tasks sleeping for a long time.
For example, as demonstrated by Shakeel Butt in [1] writing the same
task id to the "tasks" file can quickly consume significant memory. The
same problem (wasted system resources) occurs when moving a task between
different resource groups.
As pointed out by Valentin Schneider in [2] there is an additional issue
with the way in which the queueing of work is done in that the task_struct
update is currently done after the work is queued, resulting in a race with
the register update possibly done before the data needed by the update is
available.
To solve these issues, update the PQR_ASSOC MSR in a synchronous way
right after the new closid and rmid are ready during the task movement,
only if the task is running. If a moved task is not running nothing
is done since the PQR_ASSOC MSR will be updated next time the task is
scheduled. This is the same way used to update the register when tasks
are moved as part of resource group removal.
[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
[2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com
[ bp: Massage commit message and drop the two update_task_closid_rmid()
variants. ]
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
|
|
When running is M-Mode (no MMU config), MPIE does not get set. This
results in all syscalls being executed with interrupts disabled as
handle_exception never sets SR_IE as it always sees SR_PIE being
cleared. Fix this by always force enabling interrupts in
handle_syscall when CONFIG_RISCV_M_MODE is enabled.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
If of_clk_init() is not called in time_init(), clock providers defined
in the system device tree are not initialized, resulting in failures for
other devices to initialize due to missing clocks.
Similarly to other architectures and to the default kernel time_init()
implementation, call of_clk_init() before executing timer_probe() in
time_init().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Properly return -ENOSYS for syscall -1 instead of leaving the return value
uninitialized. This fixes the strace teststuite.
Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is possible to exit the nested guest mode, entered by
svm_set_nested_state prior to first vm entry to it (e.g due to pending event)
if the nested run was not pending during the migration.
In this case we must not switch to the nested msr permission bitmap.
Also add a warning to catch similar cases in the future.
Fixes: a7d5c7ce41ac1 ("KVM: nSVM: delay MSR permission processing to first nested VM run")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We overwrite most of vmcb fields while doing so, so we must
mark it as dirty.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The code to store it on the migration exists, but no code was restoring it.
One of the side effects of fixing this is that L1->L2 injected events
are no longer lost when migration happens with nested run pending.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The tdp_mmu_roots and tdp_mmu_pages in struct kvm_arch should only contain
pages with tdp_mmu_page set to true. tdp_mmu_pages should not contain any
pages with a non-zero root_count and tdp_mmu_roots should only contain
pages with a positive root_count, unless a thread holds the MMU lock and
is in the process of modifying the list. Various functions expect these
invariants to be maintained, but they are not explictily documented. Add
to the comments on both fields to document the above invariants.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210107001935.3732070-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Many TDP MMU functions which need to perform some action on all TDP MMU
roots hold a reference on that root so that they can safely drop the MMU
lock in order to yield to other threads. However, when releasing the
reference on the root, there is a bug: the root will not be freed even
if its reference count (root_count) is reduced to 0.
To simplify acquiring and releasing references on TDP MMU root pages, and
to ensure that these roots are properly freed, move the get/put operations
into another TDP MMU root iterator macro.
Moving the get/put operations into an iterator macro also helps
simplify control flow when a root does need to be freed. Note that using
the list_for_each_entry_safe macro would not have been appropriate in
this situation because it could keep a pointer to the next root across
an MMU lock release + reacquire, during which time that root could be
freed.
Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Fixes: 063afacd8730 ("kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU")
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210107001935.3732070-1-bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Message-Id: <1608277897-1932-1-git-send-email-stephenzhangzsd@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.
Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 16809ecdc1e8a moved __svm_vcpu_run the prototype to svm.h,
but forgot to remove the original from svm.c.
Fixes: 16809ecdc1e8a ("KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20201220200339.65115-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using LLVM's integrated assembler (LLVM_IAS=1) while building
x86_64_defconfig + CONFIG_KVM=y + CONFIG_KVM_AMD=y, the following build
error occurs:
$ make LLVM=1 LLVM_IAS=1 arch/x86/kvm/svm/sev.o
arch/x86/kvm/svm/sev.c:2004:15: error: too few operands for instruction
asm volatile(__ex("vmsave") : : "a" (__sme_page_pa(sd->save_area)) : "memory");
^
arch/x86/kvm/svm/sev.c:28:17: note: expanded from macro '__ex'
#define __ex(x) __kvm_handle_fault_on_reboot(x)
^
./arch/x86/include/asm/kvm_host.h:1646:10: note: expanded from macro '__kvm_handle_fault_on_reboot'
"666: \n\t" \
^
<inline asm>:2:2: note: instantiated into assembly here
vmsave
^
1 error generated.
This happens because LLVM currently does not support calling vmsave
without the fixed register operand (%rax for 64-bit and %eax for
32-bit). This will be fixed in LLVM 12 but the kernel currently supports
LLVM 10.0.1 and newer so this needs to be handled.
Add the proper register using the _ASM_AX macro, which matches the
vmsave call in vmenter.S.
Fixes: 861377730aa9 ("KVM: SVM: Provide support for SEV-ES vCPU loading")
Link: https://reviews.llvm.org/D93524
Link: https://github.com/ClangBuiltLinux/linux/issues/1216
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Message-Id: <20201219063711.3526947-1-natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes to get_mmio_spte, destined to 5.10 stable branch.
|
