summaryrefslogtreecommitdiff
path: root/drivers/acpi/fan.c
AgeCommit message (Collapse)Author
2015-07-08ACPI: Remove FSF mailing addressesJarkko Nikula
There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-16ACPI / PM: Rework device power management to follow ACPI 6Rafael J. Wysocki
The ACPI 6 specification has made some changes in the device power management area. In particular: * The D3hot power state is now supposed to be always available (instead of D3cold) and D3cold is only regarded as valid if the _PR3 object is present for the given device. * The required ordering of transitions into power states deeper than D0 is now such that for a transition into state Dx the _PSx method is supposed to be executed first, if present, and the states of the power resources the device depends on are supposed to be changed after that. * It is now explicitly forbidden to transition devices from lower-power (deeper) into higher-power (shallower) power states other than D0. Those changes have been made so the specification reflects the Windows' device power management code that the vast majority of systems using ACPI is validated against. To avoid artificial differences in ACPI device power management between Windows and Linux, modify the ACPI device power management code to follow the new specification. Add comments explaining the code flow in some unclear places. This only may affect some real corner cases in which the OS behavior expected by the firmware is different from the Windows one, but that's quite unlikely. The transition ordering change affects transitions to D1 and D2 which are rarely used (if at all) and into D3hot and D3cold for devices actually having _PR3, but those are likely to be validated against Windows anyway. The other changes may affect code calling acpi_device_get_power() or acpi_device_update_power() where ACPI_STATE_D3_HOT may be returned instead of ACPI_STATE_D3_COLD (that's why the ACPI fan driver needs to be updated too) and since transitions into ACPI_STATE_D3_HOT may remove power now, it is better to avoid this one in acpi_pm_device_sleep_state() if the "no power off" PM QoS flag is set. The only existing user of acpi_device_can_poweroff() really cares about the case when _PR3 is present, so the change in that function should not cause any problems to happen too. A plus is that PCI_D3hot can be mapped to ACPI_STATE_D3_HOT now and the compatibility with older systems should be covered automatically. In any case, if any real problems result from this, it still will be better to follow the Windows' behavior (which now is reflected by the specification too) in general and handle the cases when it doesn't work via quirks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-11ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devicesSrinivas Pandruvada
The _ART (Active Cooling Relationship Table), specifies relationship among heat generating sources to a target active cooling device like fan. The _ART table refers to actual bus id name for specifying relationship. Naming "Fan" is not enough as name in the _ART table can change on every platform, to establish relationship for user space thermal controllers. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-10ACPI / Fan: support INT3404 thermal deviceAaron Lu
INT3404 ACPI object follows the ACPI 5.0 fan object definition as described in section 11.3 of the ACPI 5.0 Specification. Thus we can reuse the ACPI fan driver for INT3404 ACPI object. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10ACPI / Fan: add ACPI 4.0 style fan supportAaron Lu
This patch adds support for ACPI 4.0 style fan, lacking part is: no support for 'Low Speed Notification Support', 'Fine Grain Control' is not used yet. It's not clear what to do on suspend/resume callback for 4.0 style ACPI fan, so it does nothing for now. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10ACPI / fan: convert to platform driverAaron Lu
Convert ACPI fan driver to a platform driver for the purpose of phasing out ACPI bus. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelantAaron Lu
When we have the acpi_device pointer, there is no need to pass the device's handle to the acpi_bus_xxx_power functions to get/set/update the device's power state, instead, use the acpi_device_xxx_power functions directly. To make this happen for fan module, export acpi_device_update_power. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10ACPI / fan: remove no need check for device pointerAaron Lu
The device pointer will not be NULL in the PM callback and ACPI driver's add/remove callback, so checking NULL for them isn't necessary. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10ACPI / fan: remove unused macroAaron Lu
The _COMPONENT, ACPI_MODULE_NAME(name) and ACPI_FAN_FILE_STATE are not used anywhere so remove them. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-07ACPI / fan: printk replacementSudip Mukherjee
printk replaced with corresponding dev_err and dev_info fixed one broken user-visible string multiine comment edited for correct commenting style asm/uaccess.h replaced with linux/uaccess.h PREFIX removed Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20ACPI / fan: do nothing in suspend and poweroff callbackAaron Lu
We put fans to full speed in acpi_fan_suspend(), but that is only needed in the hibernation case when we are generating hibernation image, so this patch removes that when we are about to suspend or poweroff. References: http://www.spinics.net/lists/linux-acpi/msg48636.html Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-13ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefinedShuah Khan
The ACPI fan driver defines acpi_fan_suspend() and acpi_fan_resume() when CONFIG_PM_SLEEP is defined. This results in the following compile errors when CONFIG_PM_SLEEP is undefined: drivers/acpi/fan.c:60:8: error: ‘acpi_fan_suspend’ undeclared here (not in a function) drivers/acpi/fan.c:60:8: error: ‘acpi_fan_resume’ undeclared here (not in a function) Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24ACP / fan: trivial style cleanupFelipe Contreras
Remove label indentation in acpi_fan_add(). Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-30ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhereRafael J. Wysocki
There are several places in the tree where ACPI_STATE_D3 is used instead of ACPI_STATE_D3_COLD which should be used instead for clarity. Modify them all to use ACPI_STATE_D3_COLD as appropriate. [The definition of ACPI_STATE_D3 itself cannot go away at this point as it is part of ACPICA.] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com>
2013-07-04ACPI / fan: Initialize acpi_state variableNaresh Bhat
Make the following compiler warning go away: CC drivers/acpi/fan.o drivers/acpi/fan.c: In function ‘fan_get_cur_state’: drivers/acpi/fan.c:96:9: warning: ‘acpi_state’ may be used uninitialized in this function [-Wuninitialized] by initializing the local variable acpi_state in fan_get_cur_state(). [rjw: Changelog] Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25ACPI / fan: avoid null pointer deference errorColin Ian King
Fix a null pointer deference by acpi_driver_data() if device is null. We should only set cdev and check this is OK after we are sure device is not null. Smatch analysis: drivers/acpi/fan.c:179 acpi_fan_remove() warn: variable dereferenced before check 'device' (see line 177) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2012-09-21ACPI/fan: convert to module_acpi_driver()Mika Westerberg
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-08-10ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEPRafael J. Wysocki
According to compiler warnings, several suspend/resume functions in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add #ifdefs to prevent them from being built in that case. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01ACPI: Use struct dev_pm_ops for power management in the fan driverRafael J. Wysocki
Make the ACPI fan driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct acpi_device_ops. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01ACPI / PM: Drop pm_message_t argument from device suspend callbackRafael J. Wysocki
None of the drivers implementing the ACPI device suspend callback uses the pm_message_t argument of it, so this argument may be dropped entirely from that callback. This will simplify switching the ACPI bus type to PM handling based on struct dev_pm_ops. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-16ACPI: constify ops structsVasiliy Kulikov
Structs battery_file, acpi_dock_ops, file_operations, thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops are not changed in runtime. It is safe to make them const. register_hotplug_dock_device() was altered to take const "ops" argument to respect acpi_dock_ops' const notion. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / Fan: Rework the handling of power resourcesRafael J. Wysocki
Use the new function acpi_bus_update_power() for manipulating power resources used by ACPI fan devices, which allows them to be put into the right state during initialization and resume. Consequently, remove the flags.force_power_state field from struct acpi_device, which is not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15ACPI fan: remove deprecated procfs I/FZhang Rui
Remove deprecated ACPI Fan driver procfs interface. The ACPI fan driver (CONFIG_ACPI_FAN) selects the generic thermal sysfs driver (CONFIG_THERMAL) since 2.6.26, so new sysfs I/F is available at /sys/class/thermal/cooling_devicecX/ Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI: fan: Fix more unbalanced code blockLuis Henriques
commit 934231de706d2579fae14f5857fcd8de991009ff fixes an unbalanced CONFIG_ACPI_PROCFS code block during module initialisation. This patch fixes similar issue but for the module exit. Signed-off-by: Luis Henriques <luis.henrix@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10ACPI: fan: fix unbalanced code blockLiang Li
The code block braced with CONFIG_ACPI_PROCFS is unblanced. When CONFIG_ACPI_PROCFS=n, kernel trace will be produced like: Call Trace: [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b02c>] warn_slowpath_common+0x6c/0xc0 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30 [<c111637d>] remove_proc_entry+0x20d/0x290 [<c1116bd7>] ? proc_register+0x117/0x1f0 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50 [<c14f483c>] ? acpi_fan_init+0x0/0x2c [<c14f485f>] acpi_fan_init+0x23/0x2c [<c1001123>] do_one_initcall+0x23/0x180 [<c107dcf7>] ? init_irq_proc+0x67/0x80 [<c14d43bd>] kernel_init+0x13c/0x20e [<c1030e50>] ? schedule_tail+0x20/0x90 [<c1389e06>] ? syscall_exit+0x5/0x16 [<c14d4281>] ? kernel_init+0x0/0x20e [<c14d4281>] ? kernel_init+0x0/0x20e [<c10032f6>] kernel_thread_helper+0x6/0x30 ---[ end trace a7919e7f17c0a725 ]--- Then also bracket later error checking code with ACPI_PROCFS option to avoid mismatch problem. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16ACPI: Remove repeated registered as cooling_device messagesMike Travis
This message shows up for each cpu. Print as debug messages. [ 12.893967] processor ACPI0007:00: registered as cooling_device0 [ 12.907838] processor ACPI0007:01: registered as cooling_device1 Signed-off-by: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: linux-acpi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-02-20thermal: use integers rather than strings for thermal valuesMatthew Garrett
The thermal API currently uses strings to pass values to userspace. This makes it difficult to use from within the kernel. Change the interface to use integers and fix up the consumers. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.hBjorn Helgaas
Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'misc' into testLen Brown
2008-10-22ACPI: replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printkLin Ming
ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core. So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...) and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...) We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see ------------------------------------------------------------- commit 6468463abd7051fcc29f3ee7c931f9bbbb26f5a4 Author: Len Brown <len.brown@intel.com> Date: Mon Jun 26 23:41:38 2006 -0400 ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...) Signed-off-by: Len Brown <len.brown@intel.com> ------------------------------------------------------------- Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10ACPI: catch calls of acpi_driver_data on pointer of wrong typePavel Machek
Catch attempts to use of acpi_driver_data on pointers of wrong type. akpm: rewritten to use proper C typechecking and remove the "function"-used-as-lvalue thing. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-21driver core: fix a lot of printk usages of bus_idGreg Kroah-Hartman
We have the dev_printk() variants for this kind of thing, use them instead of directly trying to access the bus_id field of struct device. This is done in order to remove bus_id entirely. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-16ACPI: fix acpi fan state set errorYi Yang
Under /proc/acpi, there is a fan control interface, a user can set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3 denotes D3 state, but in current implementation, a user can set a fan to D1 state by any char excluding '1', '2' and '3'. For example: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on Obviously, such inputs as "" and "xxxxx" are invalid for fan state. This patch fixes this issue, it strictly limits fan state only to accept 0, 1, 2 and 3, any other inputs are invalid. Before applying this patch, the test result is: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# After applying this patch, the test result is: [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits) ACPI: Fix acpi_processor_idle and idle= boot parameters interaction acpi: fix section mismatch warning in pnpacpi intel_menlo: fix build warning ACPI: Cleanup: Remove unneeded, multiple local dummy variables ACPI: video - fix permissions on some proc entries ACPI: video - properly handle errors when registering proc elements ACPI: video - do not store invalid entries in attached_array list ACPI: re-name acpi_pm_ops to acpi_suspend_ops ACER_WMI/ASUS_LAPTOP: fix build bug thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed ACPI: check a return value correctly in acpi_power_get_context() #if 0 acpi/bay.c:eject_removable_drive() eeepc-laptop: add hwmon fan control eeepc-laptop: add backlight eeepc-laptop: add base driver ACPI: thinkpad-acpi: bump up version to 0.20 ACPI: thinkpad-acpi: fix selects in Kconfig ACPI: thinkpad-acpi: use a private workqueue ACPI: thinkpad-acpi: fluff really minor fix ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation ... Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c manually.
2008-04-29acpi: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Len Brown <lenb@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29ACPI: elide a non-zero test on a result that is never 0Julia Lawall
thermal_cooling_device_register used to return NULL if THERMAL is "n". As the ACPI fan, processor and video drivers SELECT the generic thermal in PATCH 01, this is not a problem any more. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-28revert "ACPI: drivers/acpi: elide a non-zero test on a result that is never 0"Ingo Molnar
Revert commit 1192aeb957402b45f311895f124e4ca41206843c ("ACPI: drivers/acpi: elide a non-zero test on a result that is never 0") because it turns out that thermal_cooling_device_register() does actually return NULL if CONFIG_THERMAL is turned off (then the routine turns into a dummy inline routine in the header files that returns NULL unconditionally). This was found with randconfig testing, causing a crash during bootup: initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51() Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c() BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14) EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0 EIP is at acpi_fan_add+0x7d/0xfd EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007 ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000) Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584 b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558 Call Trace: [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb [<783005d7>] ? driver_probe_device+0x82/0xfc [<783007f6>] ? __driver_attach+0x3a/0x70 [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60 [<7830048c>] ? driver_attach+0x14/0x16 [<783007bc>] ? __driver_attach+0x0/0x70 [<7830006a>] ? bus_add_driver+0x9d/0x1b0 [<783008c3>] ? driver_register+0x47/0xa3 [<7813db00>] ? timespec_to_ktime+0x9/0xc [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c [<78878592>] ? acpi_fan_init+0xd/0x2c [<78863656>] ? kernel_init+0xac/0x1f9 [<788635aa>] ? kernel_init+0x0/0x1f9 [<78114563>] ? kernel_thread_helper+0x7/0x10 ======================= Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc ---[ end trace 778e504de7e3b1e3 ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Julia Lawall <julia@diku.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27ACPI: drivers/acpi: elide a non-zero test on a result that is never 0Julia Lawall
The function thermal_cooling_device_register always returns either a valid pointer or a value made with ERR_PTR, so a test for non-zero on the result will always succeed. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) //<smpl> @a@ expression E, E1; statement S,S1; position p; @@ E = thermal_cooling_device_register(...) ... when != E = E1 if@p (E) S else S1 @n@ position a.p; expression E,E1; statement S,S1; @@ E = NULL ... when != E = E1 if@p (E) S else S1 @depends on !n@ expression E; statement S,S1; position a.p; @@ * if@p (E) S else S1 //</smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-15ACPI fan: extract return values using PTR_ERRThomas Sujith
Need to extract errors using PTR_ERR macro and process accordingly. thermal_cooling_device_register returning NULL means that CONFIG_THERMAL=n and in that case no need to create symbolic links. Signed-off-by: Thomas Sujith <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-02ACPI: fan: build fix for CONFIG_ACPI_PROCFS=nLen Brown
drivers/acpi/fan.c:340: error: ‘acpi_fan_dir’ undeclared (first use in this function) Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01ACPI: register ACPI Fan as generic thermal cooling deviceZhang Rui
Register ACPI Fan as thermal cooling device. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Thomas Sujith <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25ACPI: Fan: Drop force_power_state acpi_device optionAlexey Starikovskiy
force_power_state was used as a workaround for invalid cached power state of the device. We do not cache power state, so no need for workaround. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25ACPI: Fan: fan device does not need own structureAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>