summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2018-08-22ACPI / PM: save NVS memory for ASUS 1025C laptopWilly Tarreau
commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream. Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an issue by which the fan would run at full speed upon resume. Bisecting it showed me the issue was introduced in 3.17 by commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3). This code only affects machines built starting as of 2012, but this Asus 1025C laptop was made in 2012 and apparently needs the NVS data to be saved, otherwise the CPU's thermal state is not properly reported on resume and the fan runs at full speed upon resume. Here's a very simple way to check if such a machine is affected : # cat /sys/class/thermal/thermal_zone0/temp 55000 ( now suspend, wait one second and resume ) # cat /sys/class/thermal/thermal_zone0/temp 0 (and after ~15 seconds the fan starts to spin) Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory for Lenovo G50-45) and reuse the function it provides. Note that this commit was already backported to 4.9.x but not 4.4.x. Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13 Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ACPI: save NVS memory for Lenovo G50-45Zhang Rui
commit cbc00c1310d34139a63946482b40a6b261a03fb9 upstream. In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431 Tested-by: Przemek <soprwa@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Drop unnecessary code ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devicesHans de Goede
commit fdcb613d49321b5bf5d5a1bd0fba8e7c241dcc70 upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c748179754 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb8a7f ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06PCI: pciehp: Request control of native hotplug only if supportedMika Westerberg
[ Upstream commit 408fec36a1ab3d14273c2116b449ef1e9be3cb8b ] Currently we request control of native PCIe hotplug unconditionally. Native PCIe hotplug events are handled by the pciehp driver, and if it is not enabled those events will be lost. Request control of native PCIe hotplug only if the pciehp driver is enabled, so we will actually handle native PCIe hotplug events. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.cSeunghun Han
[ Upstream commit 97f3c0a4b0579b646b6b10ae5a3d59f0441cc12c ] I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.464168] ACPI: Added _OSI(Module Device) >[ 0.467022] ACPI: Added _OSI(Processor Device) >[ 0.469376] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.471647] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.477997] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174) >[ 0.482706] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461) >[ 0.487503] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.492136] ACPI Error: Method parse/execution failed [\_SB._INI] (Node ffff88021710a618), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.497683] ACPI: Interpreter enabled >[ 0.499385] ACPI: (supports S0) >[ 0.501151] ACPI: Using IOAPIC for interrupt routing >[ 0.503342] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174) >[ 0.506522] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461) >[ 0.510463] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.514477] ACPI Error: Method parse/execution failed [\_PIC] (Node ffff88021710ab18), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.518867] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20170303/bus-991) >[ 0.522384] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.524597] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.526795] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.529668] Call Trace: >[ 0.530811] ? dump_stack+0x5c/0x81 >[ 0.532240] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.533905] ? acpi_os_delete_cache+0xa/0x10 >[ 0.535497] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.537237] ? acpi_terminate+0xa/0x14 >[ 0.538701] ? acpi_init+0x2af/0x34f >[ 0.540008] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.541593] ? do_one_initcall+0x4e/0x1a0 >[ 0.543008] ? kernel_init_freeable+0x19e/0x21f >[ 0.546202] ? rest_init+0x80/0x80 >[ 0.547513] ? kernel_init+0xa/0x100 >[ 0.548817] ? ret_from_fork+0x25/0x30 >[ 0.550587] vgaarb: loaded >[ 0.551716] EDAC MC: Ver: 3.0.0 >[ 0.553744] PCI: Probing PCI hardware >[ 0.555038] PCI host bridge to bus 0000:00 > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ns_evaluate() function only removes Info->return_object in AE_CTRL_RETURN_VALUE case. But, when errors occur, the status value is not AE_CTRL_RETURN_VALUE, and Info->return_object is also not null. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak. Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ACPICA: Events: add a return on failure from acpi_hw_register_readErik Schmauss
[ Upstream commit b4c0de312613ca676db5bd7e696a44b56795612a ] This ensures that acpi_ev_fixed_event_detect() does not use fixed_status and and fixed_enable as uninitialized variables. Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ACPI: acpi_pad: Fix memory leak in power saving threadsLenny Szubowicz
[ Upstream commit 8b29d29abc484d638213dd79a18a95ae7e5bb402 ] Fix once per second (round_robin_time) memory leak of about 1 KB in each acpi_pad kernel idling thread that is activated. Found by testing with kmemleak. Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ACPI: processor_perflib: Do not send _PPC change notification if not readyChen Yu
[ Upstream commit ba1edb9a5125a617d612f98eead14b9b84e75c3a ] The following warning was triggered after resumed from S3 - if all the nonboot CPUs were put offline before suspend: [ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30) [ 1840.329516] Call Trace: [ 1840.329521] __rdmsr_on_cpu+0x33/0x50 [ 1840.329525] generic_exec_single+0x81/0xb0 [ 1840.329527] smp_call_function_single+0xd2/0x100 [ 1840.329530] ? acpi_ds_result_pop+0xdd/0xf2 [ 1840.329532] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329534] rdmsrl_on_cpu+0x57/0x80 [ 1840.329536] ? cpumask_next+0x1b/0x20 [ 1840.329538] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329541] intel_pstate_update_perf_limits+0xf3/0x220 [ 1840.329544] ? notifier_call_chain+0x4a/0x70 [ 1840.329546] intel_pstate_set_policy+0x4e/0x150 [ 1840.329548] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329550] cpufreq_update_policy+0xb2/0x130 [ 1840.329552] ? cpufreq_update_policy+0x130/0x130 [ 1840.329556] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329558] acpi_processor_notify+0x80/0x100 [ 1840.329561] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329563] acpi_os_execute_deferred+0x14/0x20 [ 1840.329565] process_one_work+0x193/0x3c0 [ 1840.329567] worker_thread+0x35/0x3b0 [ 1840.329569] kthread+0x125/0x140 [ 1840.329571] ? process_one_work+0x3c0/0x3c0 [ 1840.329572] ? kthread_park+0x60/0x60 [ 1840.329575] ? do_syscall_64+0x67/0x180 [ 1840.329577] ret_from_fork+0x25/0x30 [ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30) [ 1840.329586] Call Trace: [ 1840.329587] __wrmsr_on_cpu+0x37/0x40 [ 1840.329589] generic_exec_single+0x81/0xb0 [ 1840.329592] smp_call_function_single+0xd2/0x100 [ 1840.329594] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329595] ? cpumask_next+0x1b/0x20 [ 1840.329597] wrmsrl_on_cpu+0x57/0x70 [ 1840.329598] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329599] ? wrmsrl_on_cpu+0x57/0x70 [ 1840.329602] intel_pstate_hwp_set+0xd3/0x150 [ 1840.329604] intel_pstate_set_policy+0x119/0x150 [ 1840.329606] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329607] cpufreq_update_policy+0xb2/0x130 [ 1840.329610] ? cpufreq_update_policy+0x130/0x130 [ 1840.329613] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329615] acpi_processor_notify+0x80/0x100 [ 1840.329617] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329619] acpi_os_execute_deferred+0x14/0x20 [ 1840.329620] process_one_work+0x193/0x3c0 [ 1840.329622] worker_thread+0x35/0x3b0 [ 1840.329624] kthread+0x125/0x140 [ 1840.329625] ? process_one_work+0x3c0/0x3c0 [ 1840.329626] ? kthread_park+0x60/0x60 [ 1840.329628] ? do_syscall_64+0x67/0x180 [ 1840.329631] ret_from_fork+0x25/0x30 This is because if there's only one online CPU, the MSR_PM_ENABLE (package wide)can not be enabled after resumed, due to intel_pstate_hwp_enable() will only be invoked on AP's online process after resumed - if there's no AP online, the HWP remains disabled after resumed (BIOS has disabled it in S3). Then if there comes a _PPC change notification which touches HWP register during this stage, the warning is triggered. Since we don't call acpi_processor_register_performance() when HWP is enabled, the pr->performance will be NULL. When this is NULL we don't need to do _PPC change notification. Reported-by: Doug Smythies <dsmythies@telus.net> Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Yu Chen <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5EHans de Goede
commit bbf038618a24d72e2efc19146ef421bb1e1eda1a upstream. Just like many other Samsung models, the 670Z5E needs to use the acpi-video backlight interface rather then the native one for backlight control to work, add a quirk for this. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ACPICA: Disassembler: Abort on an invalid/unknown AML opcodeBob Moore
[ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ] ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cb Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ACPICA: Events: Add runtime stub support for event APIsLv Zheng
[ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ] ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3bec Tested-by: Chandan Tagore <tagore.chandan@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08ACPI, PCI, irq: remove redundant check for null string pointerColin Ian King
commit 45288978859119c019eff93f0cb838a0de100bcc upstream. source is decleared as a 4 byte char array in struct acpi_pci_routing_table so !prt->source is a redundant null string pointer check. Detected with smatch: drivers/acpi/pci_irq.c:134 do_prt_fixups() warn: this array is probably non-NULL. 'prt->source' Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28acpi, numa: fix pxm to online numa node associationsDan Williams
commit dc9e0a9347e932e3fd3cd03e7ff241022ed6ea8a upstream. Commit 99759869faf1 "acpi: Add acpi_map_pxm_to_online_node()" added support for mapping a given proximity to its nearest, by SLIT distance, online node. However, it sometimes returns unexpected results due to the fact that it switches from comparing the PXM node to the last node that was closer than the current max. for_each_online_node(n) { dist = node_distance(node, n); if (dist < min_dist) { min_dist = dist; node = n; <---- from this point we're using the wrong node for node_distance() Fixes: 99759869faf1 ("acpi: Add acpi_map_pxm_to_online_node()") Cc: <stable@vger.kernel.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ACPI / PMIC: xpower: Fix power_table addressesHans de Goede
[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ] The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot). Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel. While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ACPI/processor: Replace racy task affinity logicThomas Gleixner
[ Upstream commit 8153f9ac43897f9f4786b30badc134fcc1a4fb11 ] acpi_processor_get_throttling() requires to invoke the getter function on the target CPU. This is achieved by temporarily setting the affinity of the calling user space thread to the requested CPU and reset it to the original affinity afterwards. That's racy vs. CPU hotplug and concurrent affinity settings for that thread resulting in code executing on the wrong CPU and overwriting the new affinity setting. acpi_processor_get_throttling() is invoked in two ways: 1) The CPU online callback, which is already running on the target CPU and obviously protected against hotplug and not affected by affinity settings. 2) The ACPI driver probe function, which is not protected against hotplug during modprobe. Switch it over to work_on_cpu() and protect the probe function against CPU hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ACPI/processor: Fix error handling in __acpi_processor_start()Thomas Gleixner
[ Upstream commit a5cbdf693a60d5b86d4d21dfedd90f17754eb273 ] When acpi_install_notify_handler() fails the cooling device stays registered and the sysfs files created via acpi_pss_perf_init() are leaked and the function returns success. Undo acpi_pss_perf_init() and return a proper error code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20170412201042.695499645@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ACPI: sbshc: remove raw pointer from printk() messageGreg Kroah-Hartman
commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by: Wang Qize <wang_qize@venustech.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03ACPI / bus: Leave modalias empty for devices which are not presentHans de Goede
[ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ] Most Bay and Cherry Trail devices use a generic DSDT with all possible peripheral devices present in the DSDT, with their _STA returning 0x00 or 0x0f based on AML variables which describe what is actually present on the board. Since ACPI device objects with a 0x00 status (not present) still get an entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID modalias, userspace would end up loading modules for non present hardware. This commit fixes this by leaving the modalias empty for non present devices. This results in 10 modules less being loaded with a generic distro kernel config on my Cherry Trail test-device (a GPD pocket). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ACPICA: Namespace: fix operand cache leakSeunghun Han
commit 3b2d69114fefa474fca542e51119036dceb4aa6f upstream. ACPICA commit a23325b2e583556eae88ed3f764e457786bf4df6 I found some ACPI operand cache leaks in ACPI early abort cases. Boot log of ACPI operand cache leak is as follows: >[ 0.174332] ACPI: Added _OSI(Module Device) >[ 0.175504] ACPI: Added _OSI(Processor Device) >[ 0.176010] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.177032] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.178284] ACPI: SCI (IRQ16705) allocation failed >[ 0.179352] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20160930/evevent-131) >[ 0.180008] ACPI: Unable to start the ACPI Interpreter >[ 0.181125] ACPI Error: Could not remove SCI handler (20160930/evmisc-281) >[ 0.184068] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.185358] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc3 #2 >[ 0.186820] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.188000] Call Trace: >[ 0.188000] ? dump_stack+0x5c/0x7d >[ 0.188000] ? kmem_cache_destroy+0x224/0x230 >[ 0.188000] ? acpi_sleep_proc_init+0x22/0x22 >[ 0.188000] ? acpi_os_delete_cache+0xa/0xd >[ 0.188000] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.188000] ? acpi_terminate+0x5/0xf >[ 0.188000] ? acpi_init+0x288/0x32e >[ 0.188000] ? __class_create+0x4c/0x80 >[ 0.188000] ? video_setup+0x7a/0x7a >[ 0.188000] ? do_one_initcall+0x4e/0x1b0 >[ 0.188000] ? kernel_init_freeable+0x194/0x21a >[ 0.188000] ? rest_init+0x80/0x80 >[ 0.188000] ? kernel_init+0xa/0x100 >[ 0.188000] ? ret_from_fork+0x25/0x30 When early abort is occurred due to invalid ACPI information, Linux kernel terminates ACPI by calling acpi_terminate() function. The function calls acpi_ns_terminate() function to delete namespace data and ACPI operand cache (acpi_gbl_module_code_list). But the deletion code in acpi_ns_terminate() function is wrapped in ACPI_EXEC_APP definition, therefore the code is only executed when the definition exists. If the define doesn't exist, ACPI operand cache (acpi_gbl_module_code_list) is leaked, and stack dump is shown in kernel log. This causes a security threat because the old kernel (<= 4.9) shows memory locations of kernel functions in stack dump, therefore kernel ASLR can be neutralized. To fix ACPI operand leak for enhancing security, I made a patch which removes the ACPI_EXEC_APP define in acpi_ns_terminate() function for executing the deletion code unconditionally. Link: https://github.com/acpica/acpica/commit/a23325b2 Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ACPI / scan: Prefer devices without _HID/_CID for _ADR matchingRafael J. Wysocki
commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 upstream. The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ACPI / processor: Avoid reserving IO regions too earlyRafael J. Wysocki
commit 86314751c7945fa0c67f459beeda2e7c610ca429 upstream. Roland Dreier reports that one of his systems cannot boot because of the changes made by commit ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure). The problematic part of it is the request_region() call in acpi_processor_get_info() that used to run at module init time before the above commit and now it runs much earlier. Unfortunately, the region(s) reserved by it fall into a range the PCI subsystem attempts to reserve for AHCI IO BARs. As a result, the PCI reservation fails and AHCI doesn't work, while previously the PCI reservation would be made before acpi_processor_get_info() and it would succeed. That request_region() call, however, was overlooked by commit ac212b6980d8, as it is not necessary for the enumeration of the processors. It only is needed when the ACPI processor driver actually attempts to handle them which doesn't happen before loading the ACPI processor driver module. Therefore that call should have been moved from acpi_processor_get_info() into that module. Address the problem by moving the request_region() call in question out of acpi_processor_get_info() and use the observation that the region reserved by it is only needed if the FADT-based CPU throttling method is going to be used, which means that it should be sufficient to invoke it from acpi_processor_get_throttling_fadt(). Fixes: ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure) Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ACPI: APEI / ERST: Fix missing error handling in erst_reader()Takashi Iwai
commit bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 upstream. The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Tested-by: Jerry Tang <jtang@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removalJames Morse
commit 7d64f82cceb21e6d95db312d284f5f195e120154 upstream. When removing a GHES device notified by SCI, list_del_rcu() is used, ghes_remove() should call synchronize_rcu() before it goes on to call kfree(ghes), otherwise concurrent RCU readers may still hold this list entry after it has been freed. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Fixes: 81e88fdc432a (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ACPI: ioapic: Clear on-stack resource before using itJoerg Roedel
commit e3d5092b6756b9e0b08f94bbeafcc7afe19f0996 upstream. The on-stack resource-window 'win' in setup_res() is not properly initialized. This causes the pointers in the embedded 'struct resource' to contain stale addresses. These pointers (in my case the ->child pointer) later get propagated to the global iomem_resources list, causing a #GP exception when the list is traversed in iomem_map_sanity_check(). Fixes: c183619b63ec (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug) Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ACPI / scan: Prefer devices without _HID/_CID for _ADR matchingRafael J. Wysocki
[ Upstream commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 ] The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-27ACPI / power: Avoid maybe-uninitialized warningArnd Bergmann
commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)Dan Williams
commit b03b99a329a14b7302f37c3ea6da3848db41c8c5 upstream. While reviewing the -stable patch for commit 86ef58a4e35e "nfit, libnvdimm: fix interleave set cookie calculation" Ben noted: "This is returning an int, thus it's effectively doing a 32-bit comparison and not the 64-bit comparison you say is needed." Update the compare operation to be immune to this integer demotion problem. Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Fixes: 86ef58a4e35e ("nfit, libnvdimm: fix interleave set cookie calculation") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08ACPI: Do not create a platform_device for IOAPIC/IOxAPICJoerg Roedel
commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08ACPI: Fix incompatibility with mcount-based function graph tracingJosh Poimboeuf
commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30ACPI / blacklist: Make Dell Latitude 3350 ethernet workSumit Semwal
From: Michael Pobega <mpobega@neverware.com> [ Upstream commit 708f5dcc21ae9b35f395865fc154b0105baf4de4 ] The Dell Latitude 3350's ethernet card attempts to use a reserved IRQ (18), resulting in ACPI being unable to enable the ethernet. Adding it to acpi_rev_dmi_table[] helps to work around this problem. Signed-off-by: Michael Pobega <mpobega@neverware.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520Sumit Semwal
From: Alex Hung <alex.hung@canonical.com> [ Upstream commit 9523b9bf6dceef6b0215e90b2348cd646597f796 ] Precision 5520 and 3520 either hang at login and during suspend or reboot. It turns out that that adding them to acpi_rev_dmi_table[] helps to work around those issues. Signed-off-by: Alex Hung <alex.hung@canonical.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26ACPI / video: skip evaluating _DOD when it does not existAlex Hung
commit e34fbbac669de0b7fb7803929d0477f35f6e2833 upstream. Some system supports hybrid graphics and its discrete VGA does not have any connectors and therefore has no _DOD method. Signed-off-by: Alex Hung <alex.hung@canonical.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-18nfit, libnvdimm: fix interleave set cookie calculationDan Williams
commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream. The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / APEI: Fix NMI notification handlingPrarit Bhargava
commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for HP Pavilion dv6Hans de Goede
commit 6276e53fa8c06a3a5cf7b95b77b079966de9ad66 upstream. The HP Pavilion dv6 has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1204476 Link: https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1416940 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for Dell XPS 17 L702XHans de Goede
commit 350fa038c31b056fc509624efb66348ac2c1e3d0 upstream. The Dell XPS 17 L702X has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there also is an issue with the brightnesskeys on this laptop, they do not generate key-press events in anyway. That is not solved by this patch. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123661 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18ACPI / APEI: Fix incorrect return value of ghes_proc()Punit Agrawal
commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream. Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com> Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28acpi, nfit: check for the correct event code in notificationsVishal Verma
commit c09f12186d6b03b798832d95289af76495990192 upstream. Commit 209851649dc4 "acpi: nfit: Add support for hot-add" added support for _FIT notifications, but it neglected to verify the notification event code matches the one in the ACPI spec for "NFIT Update". Currently there is only one code in the spec, but once additional codes are added, older kernels (without this fix) will misbehave by assuming all event notifications are for an NFIT Update. Fixes: 209851649dc4 ("acpi: nfit: Add support for hot-add") Cc: <stable@vger.kernel.org> Cc: <linux-acpi@vger.kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ACPICA: acpi_get_sleep_type_data: Reduce warningsPrarit Bhargava
commit a59b679ab85635737947310323f2f2bcfa0664a7 upstream. ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8 Eliminate warnings for "not found" _Sx errors, since these are optional. Original NOT_FOUND status is still returned. Original changes by Prarit Bhargava. ACPICA BZ 1208. Link: https://github.com/acpica/acpica/commit/7bb77313 Link: https://bugs.acpica.org/show_bug.cgi?id=1208 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Charles (Chas) Williams" <ciwillia@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC presentLukasz Anaczkowski
commit 702b07fcc9b264c9afd372676bbdd50a762dcde0 upstream. SRAT maps APIC ID to proximity domains ids (PXM). Mapping from PXM to NUMA node ids is based on order of entries in SRAT table. SRAT table has just LAPIC entires or mix of LAPIC and X2APIC entries. As long as there are only LAPIC entires, mapping from proximity domain id to NUMA node id is as assumed by BIOS. However, once APIC entries are mixed, X2APIC entries would be first mapped which causes unexpected NUMA node mapping. To fix that, change parsing to check each entry against both LAPIC and X2APIC so mapping is in the SRAT/PXM order. This is supplemental change to the fix made by commit d81056b5278 (Handle apic/x2apic entries in MADT in correct order) and using the mechanism introduced by 9b3fedd (ACPI / tables: Add acpi_subtable_proc to ACPI table parsers). Fixes: d81056b5278 (Handle apic/x2apic entries in MADT in correct order) Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> [ rjw : Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / sysfs: fix error code in get_status()Dan Carpenter
commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream. The problem with ornamental, do-nothing gotos is that they lead to "forgot to set the error code" bugs. We should be returning -EINVAL here but we don't. It leads to an uninitalized variable in counter_show(): drivers/acpi/sysfs.c:603 counter_show() error: uninitialized symbol 'status'. Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / drivers: replace acpi_probe_lock spinlock with mutexLorenzo Pieralisi
commit 5331d9cab32ef640b4cd38a43b0858874fbb7168 upstream. Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid dataHoan Tran
commit 2324d15447a9db168b1f85e3feac635b1ff8edb8 upstream. When CPPC fails to request a PCC channel, the CPC data is freed and cpc_desc_ptr points to the invalid data. Avoid this issue by moving the cpc_desc_ptr assignment after the PCC channel request. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI: CPPC: Return error if _CPC is invalid on a CPUHoan Tran
commit 8343c40d3de32ebfe8f48b043964e4ba0e7701f7 upstream. Based on 8.4.7.1 section of ACPI 6.1 specification, if the platform supports CPPC, the _CPC object must exist under all processor objects. If cpc_desc_ptr pointer is invalid on any CPUs, acpi_get_psd_map() should return error and CPPC cpufreq driver can not be registered. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07libnvdimm, nd_blk: mask off reserved status bitsRoss Zwisler
commit 68202c9f0ad6e16ee806fbadbc5838d55fe5aa5c upstream. The "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf ...defines the layout of the block window status register. For the July 2016 version of the spec linked to above, this happens in Figure 4 on page 26. The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest of the bits in the status register are reserved, and there is a warning following the diagram that says: Note: The driver cannot assume the value of the RESERVED bits in the status register are zero. These reserved bits need to be masked off, and the driver must avoid checking the state of those bits. This change ensures that for hardware implementations that set these reserved bits in the status register, the driver won't incorrectly fail the block I/Os. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng
commit e1191bd4f62d9086a1a47adc286e7fcffc1fa55c upstream. A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-01ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal stringsLv Zheng
commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 upstream. The order of the _OSI related functionalities is as follows: acpi_blacklisted() acpi_dmi_osi_linux() acpi_osi_setup() acpi_osi_setup() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< parse_args() __setup("acpi_osi=") acpi_osi_setup_linux() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< acpi_early_init() acpi_initialize_subsystem() acpi_ut_initialize_interfaces() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ acpi_bus_init() acpi_os_initialize1() acpi_install_interface_handler(acpi_osi_handler) acpi_osi_setup_late() acpi_update_interfaces() for "!" >>>>>>>>>>>>>>>>>>>>>>>> acpi_osi_handler() Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command line setting can override the DMI detection. That's why acpi_blacklisted() is put before __setup("acpi_osi="). Then we can notice the following wrong invocation order. There are acpi_update_interfaces() (marked by <<<<) calls invoked before acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible to use acpi_osi=!* correctly from OSI DMI table or from the command line. The use of acpi_osi=!* is meant to disable both ACPICA (acpi_gbl_supported_interfaces) and Linux specific strings (osi_setup_entries) while the ACPICA part should have stopped working because of the order issue. This patch fixes this issue by moving acpi_update_interfaces() to where it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux specific strings are still handled in the original place in order to make the following command line working: acpi_osi=!* acpi_osi="Module Device". Note that since acpi_osi=!* is meant to further disable linux specific string comparing to the acpi_osi=!, there is no such use case in our bug fixing work and hence there is no one using acpi_osi=!* either from the command line or from the DMI quirks, this issue is just a theoretical issue. Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings) Tested-by: Lukas Wunner <lukas@wunner.de> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ACPI / processor: Request native thermal interrupt handling via _OSCSrinivas Pandruvada
commit a21211672c9a1d730a39aa65d4a5b3414700adfb upstream. There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ACPICA: Dispatcher: Update thread ID for recursive method callsPrarit Bhargava
commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream. ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava <prarit@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"Bjorn Helgaas
commit 6c777e8799a93e3bdb67bec622429e1b48dc90fb upstream. 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e59090, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e59090 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by: Sunjin Yang <fan4326@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 13:07:37 +0000