summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2010-07-01correct console log level when ERST ACPI table is not foundDaniel J Blueman
When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with the 'quiet' option, we still observe an "ERST: Table is not found!" warning. Quiesce it to the same info log level as the other 'table not found' warnings. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-28acpi: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-17Merge branch 'bugzilla-15951' into releaseLen Brown
2010-06-17ACPI / PM: Do not enable GPEs for system wakeup in advanceRafael J. Wysocki
After commit 9630bdd9b15d2f489c646d8bc04b60e53eb5ec78 (ACPI: Use GPE reference counting to support shared GPEs) the wakeup enable mask bits of GPEs are set as soon as the GPEs are enabled to wake up the system. Unfortunately, this leads to a regression reported by Michal Hocko, where a system is woken up from ACPI S5 by a device that is not supposed to do that, because the wakeup enable mask bit of this device's GPE is always set when acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(), although it should only be set if the device is supposed to wake up the system from the target state. To work around this issue, rework the ACPI power management code so that GPEs are not enabled to wake up the system upfront, but only during a system state transition when the target state of the system is known. [Of course, this means that the reference counting of "wakeup" GPEs doesn't really make sense and it is sufficient to set/unset the wakeup mask bits for them during system sleep transitions. This will allow us to simplify the GPE handling code quite a bit, but that change is too intrusive for 2.6.35.] Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12Merge branch 'misc-2.6.35' into releaseLen Brown
2010-06-12Merge branch 'bugzilla-13931-sleep-nvs' into releaseLen Brown
Conflicts: drivers/acpi/sleep.c Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12Merge branch 'bugzilla-102904-workaround' into releaseLen Brown
2010-06-12Merge branch 'acpica-cherry-pick' into releaseLen Brown
2010-06-12ACPICA: Truncate I/O addresses to 16 bits for Windows compatibilityMatthew Garrett
This feature is optional and is enabled if the BIOS requests any Windows OSI strings. It can also be enabled by the host OS. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12ACPICA: Limit maximum time for Sleep() operatorBob Moore
To prevent accidental deep sleeps, limit the maximum time that Sleep() will sleep. Configurable, default maximum is two seconds. ACPICA bugzilla 854. http://www.acpica.org/bugzilla/show_bug.cgi?id=854 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12Merge branch 'acpi_pad' into releaseLen Brown
2010-06-12Merge branch 'gpe-regression-fixes' into releaseLen Brown
2010-06-12ACPI / ACPICA: Fix sysfs GPE interfaceRafael J. Wysocki
The sysfs interface allowing user space to disable/enable GPEs doesn't work correctly, because a GPE disabled this way will be re-enabled shortly by acpi_ev_asynch_enable_gpe() if it was previosuly enabled by acpi_enable_gpe() (in which case the corresponding bit in its enable register's enable_for_run mask is set). To address this issue make the sysfs GPE interface use acpi_enable_gpe() and acpi_disable_gpe() instead of acpi_set_gpe() so that GPE reference counters are modified by it along with the values of GPE enable registers. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12ACPI / ACPICA: Fix GPE initializationRafael J. Wysocki
While developing the GPE reference counting code we overlooked the fact that acpi_ev_update_gpes() could have enabled GPEs before acpi_ev_initialize_gpe_block() was called. As a result, some GPEs are enabled twice during the initialization. To fix this issue avoid calling acpi_enable_gpe() from acpi_ev_initialize_gpe_block() for the GPEs that have nonzero runtime reference counters. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12ACPI / ACPICA: Avoid writing full enable masks to GPE registersRafael J. Wysocki
ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after an event signaled by it has been handled. However, this function writes the entire GPE enable mask to the GPE's enable register which may not be correct. Namely, if one of the other GPEs in the same register was previously enabled by acpi_enable_gpe() and subsequently disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will re-enable it along with the target GPE. To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it calls acpi_hw_low_set_gpe() with a special action value, ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the corresponding bit in its register's enable_for_run mask is set. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12ACPI / ACPICA: Fix low-level GPE manipulation codeRafael J. Wysocki
ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level, which is incorrect, because this function only enables the GPE if the corresponding bit in its enable register's enable_for_run mask is set. This causes acpi_set_gpe() to work incorrectly if used for enabling GPEs that were not previously enabled with acpi_enable_gpe(). As a result, among other things, wakeup-only GPEs are never enabled by acpi_enable_wakeup_device(), so the devices that use them are unable to wake up the system. To fix this issue remove acpi_ev_enable_gpe() and its counterpart acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with acpi_hw_low_set_gpe() that will be used instead to manipulate GPE enable bits at the low level. Make the users of acpi_ev_enable_gpe() and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and make sure that GPE enable masks are only updated by acpi_enable_gpe() and acpi_disable_gpe() when GPE reference counters change from 0 to 1 and from 1 to 0, respectively. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-11ACPI / ACPICA: Use helper function for computing GPE masksRafael J. Wysocki
In quite a few places ACPICA needs to compute a GPE enable mask with only one bit, corresponding to a given GPE, set. Currently, that computation is always open coded which leads to unnecessary code duplication. Fix this by introducing a helper function for computing one-bit GPE enable masks and using it where appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-11ACPI / ACPICA: Do not attempt to disable GPE when installing handlerRafael J. Wysocki
Commit 0f849d2cc6863c7874889ea60a871fb71399dd3f (ACPICA: Minimize the differences between linux GPE code and ACPICA code base) introduced a change attempting to disable a GPE before installing a handler for it in acpi_install_gpe_handler() which was incorrect. First, the GPE disabled by it is never enabled again (except during resume) which leads to battery insert/remove events not being reported on the Maxim Levitsky's machine. Second, the disabled GPE is still reported as enabled by the sysfs interface that only checks its enable register's enable_for_run mask. Revert this change for now, because it causes more damage to happen than the bug it was supposed to fix. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10ACPI: Disable Vista compatibility for Sony VGN-NS50B_LZhang Rui
Disable Vista compatibility for Sony VGN-NS50B_L. https://bugzilla.kernel.org/show_bug.cgi?id=12904#c46 Note that this change is a workaround, not a permanent fix. For the permanent fix is to figure out what compatibility means and to actually be compatible... Tested-by: Voldemar <harestomper@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10ACPI: fan: fix unbalanced code blockLiang Li
The code block braced with CONFIG_ACPI_PROCFS is unblanced. When CONFIG_ACPI_PROCFS=n, kernel trace will be produced like: Call Trace: [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b02c>] warn_slowpath_common+0x6c/0xc0 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30 [<c111637d>] remove_proc_entry+0x20d/0x290 [<c1116bd7>] ? proc_register+0x117/0x1f0 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50 [<c14f483c>] ? acpi_fan_init+0x0/0x2c [<c14f485f>] acpi_fan_init+0x23/0x2c [<c1001123>] do_one_initcall+0x23/0x180 [<c107dcf7>] ? init_irq_proc+0x67/0x80 [<c14d43bd>] kernel_init+0x13c/0x20e [<c1030e50>] ? schedule_tail+0x20/0x90 [<c1389e06>] ? syscall_exit+0x5/0x16 [<c14d4281>] ? kernel_init+0x0/0x20e [<c14d4281>] ? kernel_init+0x0/0x20e [<c10032f6>] kernel_thread_helper+0x6/0x30 ---[ end trace a7919e7f17c0a725 ]--- Then also bracket later error checking code with ACPI_PROCFS option to avoid mismatch problem. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10ACPI: Store NVS state even when entering suspend to RAMMatthew Garrett
https://bugzilla.kernel.org/show_bug.cgi?id=13931 describes a bug where a system fails to successfully resume after the second suspend. Maxim Levitsky discovered that this could be rectified by forcibly saving and restoring the ACPI non-volatile state. The spec indicates that this is only required for S4, but testing the behaviour of Windows by adding an ACPI NVS region to qemu's e820 map and registering a custom memory read/write handler reveals that it's saved and restored even over suspend to RAM. We should mimic that behaviour to avoid other broken platforms. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10suspend: Move NVS save/restore code to generic suspend functionalityMatthew Garrett
Saving platform non-volatile state may be required for suspend to RAM as well as hibernation. Move it to more generic code. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-09ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=Thomas Renninger
Patch is against latest Linus master branch and is expected to be safe bug fix. You get: ACPI: HARDWARE addr space,NOT supported yet for each ACPI defined CPU which status is active, but exceeds maxcpus= count. As these "not booted" CPUs do not run an idle routine and echo X >/proc/acpi/processor/*/throttling did not work I couldn't find a way to really access not onlined/booted machines. Still this should get fixed and /proc/acpi/processor/X dirs of cores exceeding maxcpus should not show up. I wonder whether this could get cleaned up by truncating possible cpu mask and nr_cpu_ids to setup_max_cpus early some day (and not exporting setup_max_cpus anymore then). But this needs touching of a lot other places... Signed-off-by: Thomas Renninger <trenn@suse.de> CC: travis@sgi.com CC: linux-acpi@vger.kernel.org CC: lenb@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-04Merge branch 'acpi-idle' into releaseLen Brown
2010-06-04ACPI: Eliminate us to pm ticks conversion in common pathVenkatesh Pallipadi
acpi_enter_[simple|bm] routines does us to pm tick conversion on every idle wakeup and the value is only used in /proc/acpi display. We can store the time in us and convert it into pm ticks before printing instead and avoid the conversion in the common path. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-04ACPI: Fix the incorrect calculation about C-state idle timeZhao Yakui
The C-state idle time is not calculated correctly, which will return the wrong residency time in C-state. It will have the following effects: 1. The system can't choose the deeper C-state when it is idle next time. Of course the system power is increased. E.g. On one server machine about 40W idle power is increased. 2. The powertop shows that it will stay in C0 running state about 95% time although the system is idle at most time. 2.6.35-rc1 regression caused-by: 2da513f582a96c053aacc2c92873978d2ea7abff (ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion) Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reported-by: Yu Zhidong <zhidong.yu@intel.com> Tested-by: Yu Zhidong <zhidong.yu@intel.com> Acked-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-04ACPI: acpi_pad: Don't needlessly mark LAPIC unstableChen Gong
As suggested in Venki's suggestion in the commit 0dc698b, add LAPIC unstable detection in the acpi_pad drvier too. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-01Merge branches 'bugzilla-14668' and 'misc-2.6.35' into releaseLen Brown
2010-05-28ACPI / EC / PM: Fix names of functions that block/unblock EC transactionsRafael J. Wysocki
The names of the functions used for blocking/unblocking EC transactions during suspend/hibernation suggest that the transactions are suspended and resumed by them, while in fact they are disabled and enabled. Rename the functions (and the flag used by them) to better reflect what they really do. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28ACPI / EC / PM: Fix race between EC transactions and system suspendRafael J. Wysocki
There still is a race that may result in suspending the system in the middle of an EC transaction in progress, which leads to problems (like the kernel thinking that the ACPI global lock is held during resume while in fact it's not). To remove the race condition, modify the ACPI platform suspend and hibernate callbacks so that EC transactions are blocked right after executing the _PTS global control method and are allowed to happen again right after the low-level wakeup. Introduce acpi_pm_freeze() that will disable GPEs, wait until the event queues are empty and block EC transactions. Use it wherever GPEs are disabled in preparation for switching local interrupts off. Introduce acpi_pm_thaw() that will allow EC transactions to happen again and enable runtime GPEs. Use it to balance acpi_pm_freeze() wherever necessary. In addition to that use acpi_ec_resume_transactions_early() to unblock EC transactions as early as reasonably possible during resume. Also unblock EC transactions in acpi_hibernation_finish() and in the analogous suspend routine to make sure that the EC transactions are enabled in all error paths. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=14668 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: native hardware cpuidle driver for latest Intel processors ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING sched: clarify commment for TS_POLLING ACPI: allow a native cpuidle driver to displace ACPI cpuidle: make cpuidle_curr_driver static cpuidle: add cpuidle_unregister_driver() error check cpuidle: fail to register if !CONFIG_CPU_IDLE
2010-05-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-28Merge branch 'ht-delete-2.6.35' into releaseLen Brown
2010-05-28Merge branch 'misc-2.6.35' into releaseLen Brown
2010-05-28Merge branches 'video' and 'video-edid' into releaseLen Brown
2010-05-28Merge branch 'acpi_enable' into releaseLen Brown
2010-05-28Merge branch 'bjorn-pci-root-v4-2.6.35' into releaseLen Brown
2010-05-28ACPI: Don't let acpi_pad needlessly mark TSC unstableVenkatesh Pallipadi
acpi pad driver kind of aggressively marks TSC as unstable at init time, on mwait capable and non X86_FEATURE_NONSTOP_TSC systems. This is irrespective of whether pad driver is ever going to be used on the system or deep C-states are supported/used. This will affect every user who just happens to compile in (or get a kernel version which compiles in) acpi pad driver. Move mark_tsc_unstable() out of init to the actual idle invocation path of the pad driver. There is also another bug/missing_feature in the code that it does not support 'always running apic timer' and switches to broadcast mode unconditionally. Shaohua, can you take a look at that please. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28drivers/acpi/sleep.h: Checkpatch cleanupAndrea Gelmini
drivers/acpi/sleep.h:3: WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversionVenkatesh Pallipadi
acpi_enter_[simple,bm] does idle timing in ns, convert it to timeval, then to us, then to pmtimer_ticks and then back to ns. This patch changes things to idle timing in ns, convert it to us, and then to pmtimer_ticks. Just saves an imul along this path, but makes the code cleaner. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28intel_idle: native hardware cpuidle driver for latest Intel processorsLen Brown
This EXPERIMENTAL driver supersedes acpi_idle on Intel Atom Processors, Intel Core i3/i5/i7 Processors and associated Intel Xeon processors. It does not support the Intel Core2 processor or earlier. For kernels configured with ACPI, CONFIG_INTEL_IDLE=y allows intel_idle to probe before the ACPI processor driver. Booting with "intel_idle.max_cstate=0" disables intel_idle and the system will fall back on ACPI's "acpi_idle". Typical Linux distributions load ACPI processor module early, making CONFIG_INTEL_IDLE=m not easily useful on ACPI platforms. intel_idle probes all processors at module_init time. Processors that are hot-added later will be limited to using C1 in idle. Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT caseLen Brown
commit d306ebc28649b89877a22158fe0076f06cc46f60 (ACPI: Be in TS_POLLING state during mwait based C-state entry) fixed an important power & performance issue where ACPI c2 and c3 C-states were clearing TS_POLLING even when using MWAIT (ACPI_STATE_FFH). That bug had been causing us to receive redundant scheduling interrups when we had already been woken up by MONITOR/MWAIT. Following up on that... In the MWAIT case, we don't have to subsequently check need_resched(), as that c heck was there for the TS_POLLING-clearing case. Note that not only does the cpuidle calling function already check need_resched() before calling us, the low-level entry into monitor/mwait calls it twice -- guaranteeing that a write to the trigger address can not go un-noticed. Also, in this case, we don't have to set TS_POLLING when we wake, because we never cleared it. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venki@google.com>
2010-05-27acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLINGLen Brown
api_pad exclusively uses MONITOR/MWAIT to sleep in idle, so it does not need the wakeup IPI during idle sleep that is provoked by clearing TS_POLLING. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Shaohua Li <shaohua.li@intel.com>
2010-05-27ACPI: allow a native cpuidle driver to displace ACPILen Brown
The ACPI driver would fail probe when it found that another driver had previously registered with cpuidle. But this is a natural situation, as a native hardware cpuidle driver should be able to bind instead of ACPI, and the ACPI processor driver should be able to handle yielding control of C-states while still handling P-states and T-states. Add a KERN_DEBUG line showing when acpi_idle does successfully register. Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-27hwmon: (asus_atk0110) Don't load if ACPI resources aren't enforcedJean Delvare
When the user passes the kernel parameter acpi_enforce_resources=lax, the ACPI resources are no longer protected, so a native driver can make use of them. In that case, we do not want the asus_atk0110 to be loaded. Unfortunately, this driver loads automatically due to its MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for the same device - this is bad. So I suggest that we prevent the asus_atk0110 driver from loading if acpi_enforce_resources=lax. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Luca Tettamanti <kronos.it@gmail.com> Cc: Len Brown <lenb@kernel.org>
2010-05-25drivers: acpi: don't use own implementation of hex_to_bin()Andy Shevchenko
Remove own implementation of hex_to_bin(). Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21ACPI: delete unused c-state promotion/demotion data strucuturesLen Brown
These were used before cpuidle by the native ACPI idle driver, which tracked promotion and demotion between states. The code was referenced by CONFIG_ACPI_PROCFS for /proc/acpi/processor/*/power, but as we no longer do promotion/demotion, that reference has been a NOP since the transition. Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (22 commits) ACPI: fix early DSDT dmi check warnings on ia64 ACPICA: Update version to 20100428. ACPICA: Update/clarify some parameter names associated with acpi_handle ACPICA: Rename acpi_ex_system_do_suspend->acpi_ex_system_do_sleep ACPICA: Prevent possible allocation overrun during object copy ACPICA: Split large file, evgpeblk ACPICA: Add GPE support for dynamically loaded ACPI tables ACPICA: Clarify/rename some root table descriptor fields ACPICA: Update version to 20100331. ACPICA: Minimize the differences between linux GPE code and ACPICA code base ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT ACPICA: Update DSDT copy/detection. ACPICA: Add subsystem option to force copy of DSDT to local memory ACPICA: Add detection of corrupted/replaced DSDT ACPICA: Add write support for DataTable operation regions ACPICA: Fix for acpi_reallocate_root_table for incorrect root table copy ACPICA: Update comments/headers, no functional change ACPICA: Update version to 20100304 ACPICA: Fix for possible fault in acpi_ex_release_mutex ACPICA: Standardize integer output for ACPICA warnings/errors ...
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...