summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2017-08-30ACPI: EC: Fix regression related to wrong ECDT initialization orderLv Zheng
commit 98529b9272e06a7767034fb8a32e43cdecda240a upstream. Commit 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) introduced acpi_ec_ecdt_start(), but that function is invoked before acpi_ec_query_init(), which is too early. This causes the kernel to crash if an EC event occurs after boot, when ec_query_wq is not valid: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 ... Workqueue: events acpi_ec_event_handler task: ffff9f539790dac0 task.stack: ffffb437c0e10000 RIP: 0010:__queue_work+0x32/0x430 Normally, the DSDT EC should always be valid, so acpi_ec_ecdt_start() is actually a no-op in the majority of cases. However, commit c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) caused the probing of the DSDT EC as the "boot EC" to be skipped when the ECDT EC is valid and uncovered the bug. Fix this issue by invoking acpi_ec_ecdt_start() after acpi_ec_query_init() in acpi_ec_init(). Link: https://jira01.devtools.intel.com/browse/LCK-4348 Fixes: 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) Fixes: c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) Reported-by: Wang Wendy <wendy.wang@intel.com> Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removalJames Morse
commit 7d64f82cceb21e6d95db312d284f5f195e120154 upstream. When removing a GHES device notified by SCI, list_del_rcu() is used, ghes_remove() should call synchronize_rcu() before it goes on to call kfree(ghes), otherwise concurrent RCU readers may still hold this list entry after it has been freed. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Fixes: 81e88fdc432a (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ACPI: ioapic: Clear on-stack resource before using itJoerg Roedel
commit e3d5092b6756b9e0b08f94bbeafcc7afe19f0996 upstream. The on-stack resource-window 'win' in setup_res() is not properly initialized. This causes the pointers in the embedded 'struct resource' to contain stale addresses. These pointers (in my case the ->child pointer) later get propagated to the global iomem_resources list, causing a #GP exception when the list is traversed in iomem_map_sanity_check(). Fixes: c183619b63ec (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug) Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ACPI / scan: Prefer devices without _HID/_CID for _ADR matchingRafael J. Wysocki
[ Upstream commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 ] The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27acpi/nfit: Fix memory corruption/Unregister mce decoder on failurePrarit Bhargava
commit 7e700d2c59e5853c9126642976b4f5768f64c9b3 upstream. nfit_init() calls nfit_mce_register() on module load. When the module load fails the nfit mce decoder is not unregistered. The module's memory is freed leaving the decoder chain referencing junk. This will cause panics as future registrations will reference the free'd memory. Unregister the nfit mce decoder on module init failure. [v2]: register and then unregister mce handler to avoid losing mce events [v3]: also cleanup nfit workqueue Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: lszubowi@redhat.com Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27Revert "ACPI / EC: Enable event freeze mode..." to fix a regressionLv Zheng
commit 9c40f956ce9b331493347d1b3cb7e384f7dc0581 upstream. On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier EC event freezing timing causes acpitz-virtual-0 to report a stuck 48C temparature. And with EC firmware revisioned as 1.14, without reverting back to old EC event freezing timing, the fan still blows up after a system resume. This reverts the culprit change so that the regression can be fixed without upgrading the EC firmware. Fixes: d30283057ecd (ACPI / EC: Enable event freeze mode to improve event handling) Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168 Tested-by: Damjan Georgievski <gdamjan@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ACPI / EC: Drop EC noirq hooks to fix a regressionLv Zheng
commit 662591461c4b9a1e3b9b159dbf37648a585ebaae upstream. According to bug reports, although the busy polling mode can make noirq stages execute faster, it causes abnormal fan blowing up after system resume (see the first link below for a video demonstration) on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can be fixed by upgrading the EC firmware on that machine. However, many reporters confirm that the problem can be fixed by stopping busy polling during suspend/resume and for some of them upgrading the EC firmware is not an option. For this reason, drop the noirq stage hooks from the EC driver to fix the regression. Fixes: c3a696b6e8f8 (ACPI / EC: Use busy polling mode when GPE is not enabled) Link: https://youtu.be/9NQ9x-Jm99Q Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129 Reported-by: Andreas Lindhe <andreas@lindhe.io> Tested-by: Gjorgji Jankovski <j.gjorgji@gmail.com> Tested-by: Damjan Georgievski <gdamjan@gmail.com> Tested-by: Fernando Chaves <nanochaves@gmail.com> Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com> Tested-by: Denis P. <theoriginal.skullburner@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07Revert "ACPI / button: Change default behavior to lid_init_state=open"Benjamin Tissoires
commit 878d8db039daac0938238e9a40a5bd6e50ee3c9b upstream. Revert commit 77e9a4aa9de1 (ACPI / button: Change default behavior to lid_init_state=open) which changed the kernel's behavior on laptops that boot with closed lids and expect the lid switch state to be reported accurately by the kernel. If you boot or resume your laptop with the lid closed on a docking station while using an external monitor connected to it, both internal and external displays will light on, while only the external should. There is a design choice in gdm to only provide the greeter on the internal display when lit on, so users only see a gray area on the external monitor. Also, the cursor will not show up as it's by default on the internal display too. To "fix" that, users have to open the laptop once and close it once again to sync the state of the switch with the hardware state. Even if the "method" operation mode implementation can be buggy on some platforms, the "open" choice is worse. It breaks docking stations basically and there is no way to have a user-space hwdb to fix that. On the contrary, it's rather easy in user-space to have a hwdb with the problematic platforms. Then, libinput (1.7.0+) can fix the state of the lid switch for us: you need to set the udev property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'. When libinput detects internal keyboard events, it will overwrite the state of the switch to open, making it reliable again. Given that logind only checks the lid switch value after a timeout, we can assume the user will use the internal keyboard before this timeout expires. For example, such a hwdb entry is: libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:* LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07acpi, nfit: Fix the memory error check in nfit_handle_mce()Vishal Verma
commit fc08a4703a418a398bbb575ac311d36d110ac786 upstream. The check for an MCE being a memory error in the NFIT mce handler was bogus. Use the new mce_is_memory_error() helper to detect the error properly. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170519093915.15413-3-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-27ACPI / power: Avoid maybe-uninitialized warningArnd Bergmann
commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21ACPI / EC: Use busy polling mode when GPE is not enabledLv Zheng
commit c3a696b6e8f8f75f9f75e556a9f9f6472eae2655 upstream. When GPE is not enabled, it is not efficient to use the wait polling mode as it introduces an unexpected scheduler delay. So before the GPE handler is installed, this patch uses busy polling mode for all EC(s) and the logic can be applied to non boot EC(s) during the suspend/resume process. Link: https://bugzilla.kernel.org/show_bug.cgi?id=191561 Tested-by: Jakobus Schurz <jakobus.schurz@gmail.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21ACPI / scan: Set the visited flag for all enumerated devicesRafael J. Wysocki
commit f406270bf73d71ea7b35ee3f7a08a44f6594c9b1 upstream. Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) attempted to fix a problem with ACPI-based enumerateion of I2C/SPI devices, but it forgot to ensure that the visited flag will be set for all of the other enumerated devices, so fix that. Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885 Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)Dan Williams
commit b03b99a329a14b7302f37c3ea6da3848db41c8c5 upstream. While reviewing the -stable patch for commit 86ef58a4e35e "nfit, libnvdimm: fix interleave set cookie calculation" Ben noted: "This is returning an int, thus it's effectively doing a 32-bit comparison and not the 64-bit comparison you say is needed." Update the compare operation to be immune to this integer demotion problem. Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Fixes: 86ef58a4e35e ("nfit, libnvdimm: fix interleave set cookie calculation") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ACPI: save NVS memory for Lenovo G50-45Zhang Rui
[ Upstream commit cbc00c1310d34139a63946482b40a6b261a03fb9 ] In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431 Tested-by: Przemek <soprwa@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Drop unnecessary code ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ACPI / button: Change default behavior to lid_init_state=openLv Zheng
[ Upstream commit 77e9a4aa9de10cc1418bf9a892366988802a8025 ] More and more platforms need the button.lid_init_state=open quirk. This patch sets it the default behavior. If a platform doesn't send lid open event or lid open event is lost due to the underlying system problems, then we can compare various combinations: 1. systemd/acpid is used to suspend system or not, systemd has a special logic forcing open event after resuming; 2. _LID returns a cached value or not. The result is as follows: 1. lid_init_state=method 1. cached 1. resumed by lid: (x) event=close (x) systemd=suspends again (x) acpid=suspends again (x) state=close 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. lid_init_state=open 1. cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (x) state=close 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 3. lid_init_state=ignore 1. cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (x) state=close 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close As a conclusion: 1. With systemd changed, lid_init_state=ignore has only one problem and the problem comes from an underlying issue, not userspace and kernel lid handling. 2. Without systemd changed, lid_init_state=open can be the default behavior as the pass ratio is not much worse than lid_init_state=ignore. 3. lid_init_state=method is buggy, we can have a separate patch to make it deprectated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ACPI / sysfs: Provide quirk mechanism to prevent GPE floodingLv Zheng
[ Upstream commit 9c4aa1eecb48cfac18ed5e3aca9d9ae58fbafc11 ] Sometimes, the users may require a quirk to be provided from ACPI subsystem core to prevent a GPE from flooding. Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx provided via AML table, and OSPM is lacking of the knowledge to get _Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may still occur. The existing quirk mechanism can be enabled/disabled using the following commands to prevent such kind of GPE flooding during runtime: # echo mask > /sys/firmware/acpi/interrupts/gpe00 # echo unmask > /sys/firmware/acpi/interrupts/gpe00 To avoid GPE flooding during boot, we need a boot stage mechanism. This patch provides such a boot stage quirk mechanism to stop this kind of GPE flooding. This patch doesn't fix any feature gap but since the new feature gaps could be found in the future endlessly, and can disappear if the feature gaps are filled, providing a boot parameter rather than a DMI table should suffice. Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071 Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08ACPI: Do not create a platform_device for IOAPIC/IOxAPICJoerg Roedel
commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08ACPI: Fix incompatibility with mcount-based function graph tracingJosh Poimboeuf
commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22ACPI / blacklist: Make Dell Latitude 3350 ethernet workMichael Pobega
[ Upstream commit 708f5dcc21ae9b35f395865fc154b0105baf4de4 ] The Dell Latitude 3350's ethernet card attempts to use a reserved IRQ (18), resulting in ACPI being unable to enable the ethernet. Adding it to acpi_rev_dmi_table[] helps to work around this problem. Signed-off-by: Michael Pobega <mpobega@neverware.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520Alex Hung
[ Upstream commit 9523b9bf6dceef6b0215e90b2348cd646597f796 ] Precision 5520 and 3520 either hang at login and during suspend or reboot. It turns out that that adding them to acpi_rev_dmi_table[] helps to work around those issues. Signed-off-by: Alex Hung <alex.hung@canonical.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15nfit, libnvdimm: fix interleave set cookie calculationDan Williams
commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream. The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14acpi, nfit: fix acpi_nfit_flush_probe() crashDan Williams
commit e471486c13b82b1338d49c798f78bb62b1ed0a9e upstream. We queue an on-stack work item to 'nfit_wq' and wait for it to complete as part of a 'flush_probe' request. However, if the user cancels the wait we need to make sure the item is flushed from the queue otherwise we are leaving an out-of-scope stack address on the work list. BUG: unable to handle kernel paging request at ffffbcb3c72f7cd0 IP: [<ffffffffa9413a7b>] __list_add+0x1b/0xb0 [..] RIP: 0010:[<ffffffffa9413a7b>] [<ffffffffa9413a7b>] __list_add+0x1b/0xb0 RSP: 0018:ffffbcb3c7ba7c00 EFLAGS: 00010046 [..] Call Trace: [<ffffffffa90bb11a>] insert_work+0x3a/0xc0 [<ffffffffa927fdda>] ? seq_open+0x5a/0xa0 [<ffffffffa90bb30a>] __queue_work+0x16a/0x460 [<ffffffffa90bbb08>] queue_work_on+0x38/0x40 [<ffffffffc0cf2685>] acpi_nfit_flush_probe+0x95/0xc0 [nfit] [<ffffffffc0cf25d0>] ? nfit_visible+0x40/0x40 [nfit] [<ffffffffa9571495>] wait_probe_show+0x25/0x60 [<ffffffffa9546b30>] dev_attr_show+0x20/0x50 Fixes: 7ae0fa439faf ("nfit, libnvdimm: async region scrub workqueue") Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / APEI: Fix NMI notification handlingPrarit Bhargava
commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / CPPC: set an error code on probe error pathDan Carpenter
commit 501634759d55a5b56967de6d9465acf02bbc3565 upstream. We should return -EINVAL (instead of 0) if get_cpu_device() fails. Fixes: 158c998ea44b (ACPI / CPPC: add sysfs support to compute delivered performance) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for HP Pavilion dv6Hans de Goede
commit 6276e53fa8c06a3a5cf7b95b77b079966de9ad66 upstream. The HP Pavilion dv6 has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1204476 Link: https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1416940 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for Dell XPS 17 L702XHans de Goede
commit 350fa038c31b056fc509624efb66348ac2c1e3d0 upstream. The Dell XPS 17 L702X has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there also is an issue with the brightnesskeys on this laptop, they do not generate key-press events in anyway. That is not solved by this patch. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123661 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06tools/testing/nvdimm: unit test acpi_nfit_ctl()Dan Williams
A recent flurry of bug discoveries in the nfit driver's DSM marshalling routine has highlighted the fact that we do not have unit test coverage for this routine. Add a self-test of acpi_nfit_ctl() routine before probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl() and if any of the tests fail "nfit_test.0" will be unavailable causing the rest of the tests to not run / fail. This unit test will also be a place to land reproductions of quirky BIOS behavior discovered in the field and ensure the kernel does not regress against implementations it has seen in practice. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06acpi, nfit: fix bus vs dimm confusion in xlat_statusDan Williams
Given dimms and bus commands share the same command number space we need to be careful that we are translating status in the correct context. Otherwise we can, for example, fail an ND_CMD_GET_CONFIG_SIZE command because max_xfer is zero. It fails because that condition erroneously correlates with the 'cleared == 0' failure of ND_CMD_CLEAR_ERROR. Cc: <stable@vger.kernel.org> Fixes: aef253382266 ("libnvdimm, nfit: centralize command status translation") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06acpi, nfit: validate ars_status output buffer sizeDan Williams
If an ARS Status command returns truncated output, do not process partial records or otherwise consume non-status fields. Cc: <stable@vger.kernel.org> Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06acpi, nfit, libnvdimm: fix / harden ars_status output length handlingDan Williams
Given ambiguities in the ACPI 6.1 definition of the "Output (Size)" field of the ARS (Address Range Scrub) Status command, a firmware implementation may in practice return 0, 4, or 8 to indicate that there is no output payload to process. The specification states "Size of Output Buffer in bytes, including this field.". However, 'Output Buffer' is also the name of the entire payload, and earlier in the specification it states "Max Query ARS Status Output Buffer Size: Maximum size of buffer (including the Status and Extended Status fields)". Without this fix if the BIOS happens to return 0 it causes memory corruption as evidenced by this result from the acpi_nfit_ctl() unit test. ars_status00000000: 00020000 00000000 ........ BUG: stack guard page was hit at ffffc90001750000 (stack is ffffc9000174c000..ffffc9000174ffff) kernel stack overflow (page fault): 0000 [#1] SMP DEBUG_PAGEALLOC task: ffff8803332d2ec0 task.stack: ffffc9000174c000 RIP: 0010:[<ffffffff814cfe72>] [<ffffffff814cfe72>] __memcpy+0x12/0x20 RSP: 0018:ffffc9000174f9a8 EFLAGS: 00010246 RAX: ffffc9000174fab8 RBX: 0000000000000000 RCX: 000000001fffff56 RDX: 0000000000000000 RSI: ffff8803231f5a08 RDI: ffffc90001750000 RBP: ffffc9000174fa88 R08: ffffc9000174fab0 R09: ffff8803231f54b8 R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000003 R15: ffff8803231f54a0 FS: 00007f3a611af640(0000) GS:ffff88033ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90001750000 CR3: 0000000325b20000 CR4: 00000000000406e0 Stack: ffffffffa00bc60d 0000000000000008 ffffc90000000001 ffffc9000174faac 0000000000000292 ffffffffa00c24e4 ffffffffa00c2914 0000000000000000 0000000000000000 ffffffff00000003 ffff880331ae8ad0 0000000800000246 Call Trace: [<ffffffffa00bc60d>] ? acpi_nfit_ctl+0x49d/0x750 [nfit] [<ffffffffa01f4fe0>] nfit_test_probe+0x670/0xb1b [nfit_test] Cc: <stable@vger.kernel.org> Fixes: 747ffe11b440 ("libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06acpi, nfit: fix extended status translations for ACPI DSMsVishal Verma
ACPI DSMs can have an 'extended' status which can be non-zero to convey additional information about the command. In the xlat_status routine, where we translate the command statuses, we were returning an error for a non-zero extended status, even if the primary status indicated success. Return from each command's 'case' once we have verified both its status and extend status are good. Cc: <stable@vger.kernel.org> Fixes: 11294d63ac91 ("nfit: fail DSMs that return non-zero status by default") Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-11-25Merge branches 'acpi-sleep-fixes' and 'acpi-wdat-fixes'Rafael J. Wysocki
* acpi-sleep-fixes: Revert "ACPI: Execute _PTS before system reboot" * acpi-wdat-fixes: watchdog: wdat_wdt: Select WATCHDOG_CORE
2016-11-21Revert "ACPI: Execute _PTS before system reboot"Rafael J. Wysocki
Revert commit 2c85025c75df (ACPI: Execute _PTS before system reboot) as it is reported to cause poweroff and reboot to hang on Dell Latitude E7250. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187061 Reported-by: Gianpaolo <gianpaoloc@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14Revert "ACPICA: FADT support cleanup"Rafael J. Wysocki
Pavel Machek reports that commit 6ea8c546f365 (ACPICA: FADT support cleanup) breaks thermal management on his Thinkpad X60 and T40p, so revert it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187311 Fixes: 6ea8c546f365 (ACPICA: FADT support cleanup) Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11Merge branch 'device-properties'Rafael J. Wysocki
* device-properties: ACPI / platform: Add support for build-in properties
2016-11-10ACPI / platform: Add support for build-in propertiesHeikki Krogerus
We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-29Merge branches 'acpica-fixes', 'acpi-pci-fixes' and 'acpi-apei-fixes'Rafael J. Wysocki
* acpica-fixes: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination * acpi-pci-fixes: ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages * acpi-apei-fixes: ACPI / APEI: Fix incorrect return value of ghes_proc()
2016-10-29ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()Lv Zheng
In the code path of acpi_ev_initialize_region(), there is namespace modification code unlocked. This patch tunes the code to make sure such modification are always locked. Fixes: 74f51b80a0c4 (ACPICA: Namespace: Fix dynamic table loading issues) Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-29ACPICA: Dispatcher: Fix an unbalanced lock exit path in ↵Lv Zheng
acpi_ds_auto_serialize_method() There is a lock unbalanced exit path in acpi_ds_initialize_method(), this patch corrects it. Fixes: 441ad11d078f (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization) Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-29ACPICA: Dispatcher: Fix order issue of method terminationLv Zheng
The last step of the method termination should be the end of the method serialization. Otherwise, the steps happening after it will face the race issues that cannot be protected by the method serialization mechanism. This patch fixes this issue by moving the per-method-object deletion code prior than the end of the method serialization. Otherwise, the possible race issues may result in AE_ALREADY_EXISTS error in a parallel environment. Fixes: 74f51b80a0c4 (ACPICA: Namespace: Fix dynamic table loading issues) Reported-and-tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI / APEI: Fix incorrect return value of ghes_proc()Punit Agrawal
Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com> Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQsSinan Kaya
Commit 103544d86976 ("ACPI,PCI,IRQ: reduce resource requirements") replaced the addition of PIRQ_PENALTY_PCI_USING in acpi_pci_link_allocate() with an addition in acpi_irq_pci_sharing_penalty(), but f7eca374f000 ("ACPI,PCI,IRQ: separate ISA penalty calculation") removed the use of acpi_irq_pci_sharing_penalty() for ISA IRQs. Therefore, PIRQ_PENALTY_PCI_USING is missing from ISA IRQs used by interrupt links. Include that penalty by adding it in the acpi_pci_link_allocate() path. Fixes: f7eca374f000 (ACPI,PCI,IRQ: separate ISA penalty calculation) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI/PCI: pci_link: penalize SCI correctlySinan Kaya
Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stagesSinan Kaya
We do not want to store the SCI penalty in the acpi_isa_irq_penalty[] table because acpi_isa_irq_penalty[] only holds ISA IRQ penalties and there's no guarantee that the SCI is an ISA IRQ. We add in the SCI penalty as a special case in acpi_irq_get_penalty(). But if we called acpi_penalize_isa_irq() or acpi_irq_penalty_update() for an SCI that happened to be an ISA IRQ, they stored the SCI penalty (part of the acpi_irq_get_penalty() return value) in acpi_isa_irq_penalty[]. Subsequent calls to acpi_irq_get_penalty() returned a penalty that included *two* SCI penalties. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-14Merge tag 'acpi-extra-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "This includes a couple of fixes needed after recent changes, two ACPI driver fixes (fan and "Processor Aggregator"), an update of the ACPI device properties handling code and a new MAINTAINERS entry for ACPI on ARM64. Specifics: - Fix an unused function warning that started to appear after recent changes in the ACPI EC driver (Eric Biggers). - Fix the KERN_CONT usage in acpi_os_vprintf() that has become (particularly) annoying recently (Joe Perches). - Fix the fan status checking in the ACPI fan driver to avoid returning incorrect error codes sometimes (Srinivas Pandruvada). - Fix the ACPI Processor Aggregator driver (PAD) to always let the special processor_aggregator driver from Xen take over when running as Xen dom0 (Juergen Gross). - Update the handling of reference device properties in ACPI by allowing empty rows ("holes") to appear in reference property lists (Mika Westerberg). - Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi)" * tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT ACPI / PAD: don't register acpi_pad driver if running as Xen dom0 ACPI / property: Allow holes in reference properties MAINTAINERS: Add ARM64-specific ACPI maintainers entry ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n ACPI / fan: Fix error reading cur_state
2016-10-14Merge branches 'acpi-fan', 'acpi-ec', 'acpi-drivers' and 'acpi-osl'Rafael J. Wysocki
* acpi-fan: ACPI / fan: Fix error reading cur_state * acpi-ec: ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n * acpi-drivers: ACPI / PAD: don't register acpi_pad driver if running as Xen dom0 * acpi-osl: acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
2016-10-14Merge branches 'device-properties' and 'acpi-misc'Rafael J. Wysocki
* device-properties: ACPI / property: Allow holes in reference properties * acpi-misc: MAINTAINERS: Add ARM64-specific ACPI maintainers entry
2016-10-12acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONTJoe Perches
acpi_os_vprintf currently always uses a KERN_CONT prefix which may be followed immediately by a proper KERN_<LEVEL>. Check if the buffer already has a KERN_<LEVEL> at the start of the buffer and avoid the unnecessary KERN_CONT. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-12ACPI / PAD: don't register acpi_pad driver if running as Xen dom0Juergen Gross
When running as Xen dom0 a special processor_aggregator driver is needed. Don't register the standard driver in this case. Without that check an error message: "Error: Driver 'processor_aggregator' is already registered, aborting..." will be displayed. Signed-off-by: Juergen Gross <jgross@suse.com> [ rjw: Minor fixups ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 11:24:50 +0000