summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2011-03-15ahci: add another PCI ID for marvellTejun Heo
1b4b:91a3 seems to be another PCI ID for marvell ahci. Add it. Reported and tested in the following thread. http://thread.gmane.org/gmane.linux.kernel/1068354 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Alessandro Tagliapietra <tagliapietra.alessandro@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14sata_fsl: Update RX_WATER_MARK for TRANSCFGPrabhakar Kushwaha
RX_WATER_MARK sets the number of locations in Rx FIFO that can be used before the transport layer instructs the link layer to transmit HOLDS. Note that it can take some time for the HOLDs to get to the other end, and that in the interim there must be enough room in the FIFO to absorb all data that could arrive. Update the new recommended value to 16. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14sata_fsl: Fix wrong Device Error Register usagePrabhakar Kushwaha
When a single device error is detected, the device under the error is indicated by the error bit set in the DER. There is a one to one mapping between register bit and devices on Port multiplier(PMP) i.e. bit 0 represents PMP device 0 and bit 1 represents PMP device 1 etc. Current implementation treats Device error register value as device number not set of bits representing multiple device on PMP. It is changed to consider bit level. No need to check for each set bit as all command is going to be aborted. Signed-off-by: Ashish Kalra <B00888@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14libata: Include WWN ID in inquiry VPD emulationHannes Reinecke
As per SAT-3 the WWN ID should be included in the VPD page 0x83 (device identification) emulation. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ata/pata_arasan_cf: fill dma chan->private from pdata->dma_privViresh Kumar
Some DMA controllers (eg: drivers/dma/dw_dmac*) allow platform specific configuration for dma transfers. User drivers need to set chan->private field of channel with pointer to configuration data. This patch takes dma_priv data from platform data and passes it to chan->private_data, in order to pass platform specific configuration to DMAC controller. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>Joe Perches
Commit 40d69ba029c8d5de51aaeb5358999266c482d00a ("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)") used pr_<level>. Add #define pr_fmt and remove DRV_NAME. Increment driver version numbers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14pata_arasan_cf: fix printk format string warningJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-14pata_arasan_cf: Adding support for arasan compact flash host controllerViresh Kumar
The Arasan CompactFlash Device Controller has three basic modes of operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card ATA using true IDE modes. Currently driver supports only True IDE mode. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14libata-sff: add ata_sff_queue_work() & ata_sff_queue_delayed_work()Viresh Kumar
This patch adds ata_sff_queue_work() & ata_sff_queue_delayed_work() routine in libata-sff.c file. This routine can be used by ata drivers to use ata_sff_wq. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ahci: AHCI mode SATA patch for Intel Patsburg SATA RAID controllerSeth Heasley
This patch adds an updated SATA RAID DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-02ahci: recognize Marvell 88se9125 PCIe SATA 6.0 Gb/s controllerPer Jessen
Recognize Marvell 88SE9125 PCIe SATA 6.0 Gb/s controller. Signed-off-by: Per Jessen <per@computer.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_LPMSergei Shtylyov
Commit 6b7ae9545ad9875a289f4191c0216b473e313cb9 (libata: reimplement link power management) removed the check of ATA_FLAG_LPM but neglected to remove the flag itself. Do it now... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_NO_LEGACYSergei Shtylyov
All checks of ATA_FLAG_NO_LEGACY have been removed by the commits c791c30670ea61f19eec390124128bf278e854fe ([libata] minor PCI IDE probe fixes and cleanups) and f0d36efdc624beb3d9e29b9ab9e9537bf0f25d5b (libata: update libata core layer to use devres), so I think it's time to finally get rid of this flag... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_MMIOSergei Shtylyov
Commit 0d5ff566779f894ca9937231a181eb31e4adff0e (libata: convert to iomap) removed all checks of ATA_FLAG_MMIO but neglected to remove the flag itself. Do it now, at last... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_{SRST|SATA_RESET}Sergei Shtylyov
These flags are marked as obsolete and the checks for them have been removed by commit 294440887b32c58d220fb54b73b7a58079b78f20 (libata-sff: kill unused ata_bus_reset()), so I think it's time to finally get rid of them... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: add debugging optionsSergei Shtylyov
The driver makes use of the two options (CONFIG_SATA_DWC_[V]DEBUG) to enable the debug output but they both are absent in drivers/ata/Kconfig... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix misuse of ata_get_cmd_descript()Sergei Shtylyov
The driver erroneously uses ata_get_cmd_descript() not only for printing out the ATA commands but also the protocol and DMA direction enums. Add functions for properly printing those out... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix return value of dma_dwc_xfer_setup()Sergei Shtylyov
The caller expects this function to return the DMA channel number on success, while it returns 0... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix compilation errors/warningsSergei Shtylyov
Fix the following compilation errors/warnings: drivers/ata/sata_dwc_460ex.c:43:1: warning: "DRV_NAME" redefined In file included from drivers/ata/sata_dwc_460ex.c:38: drivers/ata/libata.h:31:1: warning: this is the location of the previous definition drivers/ata/sata_dwc_460ex.c:44:1: warning: "DRV_VERSION" redefined drivers/ata/libata.h:32:1: warning: this is the location of the previous definition drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_exec_command_by_tag': drivers/ata/sata_dwc_460ex.c:1356: warning: passing argument 1 of `ata_get_cmd_descript' makes integer from pointer without a cast drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue': drivers/ata/sata_dwc_460ex.c:1476: warning: `err' is used uninitialized in this function drivers/ata/sata_dwc_460ex.c:1465: note: `err' was declared here drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue': drivers/ata/sata_dwc_460ex.c:1493: warning: passing argument 1 of `ata_get_cmd_descript' makes integer from pointer without a cast drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_prep': drivers/ata/sata_dwc_460ex.c:1537: error: `tag' undeclared (first use in this function) drivers/ata/sata_dwc_460ex.c:1537: error: (Each undeclared identifier is reported only once drivers/ata/sata_dwc_460ex.c:1537: error: for each function it appears in.) NB: error only happens if DEBUG_NCQ macro is defined... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: use ATA_PIO4Sergei Shtylyov
Somehow the driver was committed with a bare number for the PIO mask, instead of ATA_PIO4... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]Jeff Garzik
2011-03-02libata: separate error handler into usable componentsJames Bottomley
Right at the moment, the libata error handler is incredibly monolithic. This makes it impossible to use from composite drivers like libsas and ipr which have to handle error themselves in the first instance. The essence of the change is to split the monolithic error handler into two components: one which handles a queue of ata commands for processing and the other which handles the back end of readying a port. This allows the upper error handler fine grained control in calling libsas functions (and making sure they only get called for ATA commands whose lower errors have been fixed up). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix eh lockingJames Bottomley
The SCSI host eh_cmd_q should be protected by the host lock (not the port lock). This probably doesn't matter that much at the moment, since we try to serialise the add and eh pieces, but it might matter in future for more convenient error handling. Plus this switches libata to the standard eh pattern where you lock, remove from the cmd queue to a local list and unlock and then operate on the local list. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix locking for sas pathsJames Bottomley
For historical reasons, libsas uses the scsi host lock as the ata port lock, and libata always uses the ata host. For the old eh, this was largely irrelevant since the two locks were never mixed inside the code. However, the new eh has a case where it nests acquisition of the host lock inside the port lock (this does look rather deadlock prone). Obviously this would be an instant deadlock if the port lock were the host lock, so switch the libsas paths to use the ata host lock as well. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: plumb sas port scan into standard libata pathsJames Bottomley
The function ata_sas_port_init() has always really done its own thing. However, as a precursor to moving to the libata new eh, it has to be properly using the standard libata scan paths. This means separating the current libata scan paths into pieces which can be shared with libsas and pieces which cant (really just the async call and the host scan). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix hotplug for drivers which don't implement LPMTejun Heo
ata_eh_analyze_serror() suppresses hotplug notifications if LPM is being used because LPM generates spurious hotplug events. It compared whether link->lpm_policy was different from ATA_LPM_MAX_POWER to determine whether LPM is enabled; however, this is incorrect as for drivers which don't implement LPM, lpm_policy is always ATA_LPM_UNKNOWN. This disabled hotplug detection for all drivers which don't implement LPM. Fix it by comparing whether lpm_policy is greater than ATA_LPM_MAX_POWER. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28libata: set queue DMA alignment to sector size for ATAPI tooTejun Heo
ata_pio_sectors() expects buffer for each sector to be contained in a single page; otherwise, it ends up overrunning the first page. This is achieved by setting queue DMA alignment. If sector_size is smaller than PAGE_SIZE and all buffers are sector_size aligned, buffer for each sector is always contained in a single page. This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of udev issue IDENTIFY_PACKET with unaligned buffer triggering the problem and causing oops. This patch fixes the problem by setting sdev->sector_size to ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to sector_size. While at it, add a warning for the unlikely but still possible scenario where sector_size is larger than PAGE_SIZE, in which case the alignment wouldn't be enough. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: John Stanley <jpsinthemix@verizon.net> Tested-by: John Stanley <jpsinthemix@verizon.net> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28libata: DVR-212D can't do SETXFER DVD-RW DVR-212DFrancesco Antonacci
PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08. Add ATA_HORKAGE_NOSETXFER for it. Reported in bko#27502. https://bugzilla.kernel.org/show_bug.cgi?id=27502 Signed-off-by: Francesco Antonacci <fraanto@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28ahci: add HFLAG_YES_FBS and apply it to 88SE9128Anssi Hannula
Commit 5f173107ecad83a50 added HFLAG_YES_FBS workaround for 88SE9128 (1b4b:9123). However, that change inadvertently caused the legacy IDE interface of the controller (with the same pci id) to become associated with the AHCI driver as well, causing the driver to try to bring the interface up in vain. Fix that by matching against class as well. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt37x: inherit prereset() method for HPT374Sergei Shtylyov
Commit ab81a505ae6be069be5b67acd7e1bab3cfb53968 (pata_hpt37x: unify ->pre_reset methods) neglected to remove the initializer for the prereset() method from 'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well as to update the comment in hpt37x_init_one()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDsSeth Heasley
This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt37x: fold 'if' statement into 'switch'Sergei Shtylyov
hpt37x_init_one() has a large *if* statement which should really be folded into the *switch* statement that currently constitutes its *else* branch, reducing one level of indentation... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)Sergei Shtylyov
... the same as the 'pata_hpt366' driver does. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)Sergei Shtylyov
... in hpt_dma_blacklisted(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_mpc52xx: inherit from ata_bmdma_port_opsTejun Heo
pata_mpc52xx supports BMDMA but inherits ata_sff_port_ops which triggers BUG_ON() when a DMA command is issued. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Roman Fietze <roman.fietze@telemotive.de> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies. pata_hpt37x: actually limit HPT370 to UltraDMA/66 pata_hpt3x2n: coding style cleanup pata_hpt37x: coding style cleanup pata_hpt366: coding style cleanup pata_hpt3x2n: calculate average f_CNT pata_hpt3x2n: clarify about HPT371N support pata_hpt{37x|3x2n}: SATA mode filtering [libata] avoid needlessly passing around ptr to SCSI completion func [libata] new driver acard_ahci, for ATP8620 host controller
2011-01-07pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies.Nick Bowler
CONFIG_HAVE_PATA_PLATFORM, by virtue of where its defined, has a dependency on CONFG_ATA and CONFIG_ATA_SFF. This causes Kconfig warnings when it is selected by various architectures, such as warning: (ARCH_VEXPRESS && <choice> || ARCH_RPC && <choice> || MACH_VPAC270 && ARCH_PXA || MACH_REALVIEW_PB11MP && ARCH_REALVIEW || MACH_REALVIEW_PBA8 && ARCH_REALVIEW || MACH_REALVIEW_PBX && ARCH_REALVIEW || MACH_BAST_IDE && ARCH_S3C2410 || MACH_ANUBIS && ARCH_S3C2410) selects HAVE_PATA_PLATFORM which has unmet direct dependencies (ATA && ATA_SFF) Since this option is only used to control visibility of the CONFIG_PATA_PLATFORM option and isn't itself visible in the menu, it is straightforward to simply remove these dependencies rather than adjust all the architectures. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt37x: actually limit HPT370 to UltraDMA/66Sergei Shtylyov
The driver clearly tries to limit HPT370[A] to UltraDMA/66 if the PCI clock is less than 50 MHz but due to cut&paste type mistake this code has no effect... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt3x2n: coding style cleanupSergei Shtylyov
Fix 8 errors and 3 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt37x: coding style cleanupSergei Shtylyov
Fix 12 errors and 15 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt366: coding style cleanupSergei Shtylyov
Fix 2 errors and 11 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *switch* and open parenthesis; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also add new line after variable definition in hpt36x_init_chipset()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt3x2n: calculate average f_CNTSergei Shtylyov
Allow hpt3x2n_pci_clock() to calculate the average f_CNT register value iff HighPoint BIOS hasn't saved one, just like the 'pata_hpt37x' driver (reading the full 16-bit register, unlike what that driver does), so that this driver would work correctly on e.g. non-x86 machine with 66 MHz PCI. I'm not sure why Alan has only done this in one driver and not the other... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt3x2n: clarify about HPT371N supportSergei Shtylyov
Commit 28e21c8c0d44cd63bad4c62f94ef0c5a1cb8402c (pata_hpt3x2n: Add HPT371N support and other bits) forgot to update the driver's Kconfig entry, heading comment, and module description (that also wrongly claims support of HPT302) which may confuse users... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07pata_hpt{37x|3x2n}: SATA mode filteringSergei Shtylyov
The Marvell bridge chips used on HighPoint SATA cards do not seem to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes; these cards are based on HPT372/372A/372N/374 chips (judging from the vendor drivers), so the Linux drivers need to have a mode_filter() method for these chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2011-01-05[libata] avoid needlessly passing around ptr to SCSI completion funcJeff Garzik
It's stored in struct scsi_cmnd->scsi_done, making several 'done' parameters to functions redundant. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-05[libata] new driver acard_ahci, for ATP8620 host controllerDavid Milburn
Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-12-26pata_cs5536: avoid implicit MSR API inclusion on x86-64Jeff Garzik
We don't need or want MSR usage here, on x86-64. x86-64 was disabled intentionally in Kconfig, but commit 9272dcc232b84ccb027d6861077934055d42764d changed that. drivers/ata/pata_cs5536.c:47:1: warning: "rdmsr" redefined In file included from arch/x86/include/asm/irqflags.h:60, from include/linux/irqflags.h:15, from arch/x86/include/asm/system.h:11, from arch/x86/include/asm/processor.h:17, from include/linux/prefetch.h:14, from include/linux/list.h:7, from include/linux/module.h:9, from drivers/ata/pata_cs5536.c:33: arch/x86/include/asm/paravirt.h:146:1: warning: this is the location of the previous definition drivers/ata/pata_cs5536.c:48:1: warning: "wrmsr" redefined arch/x86/include/asm/paravirt.h:154:1: warning: this is the location of the previous definition Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 21:53:10 +0000