summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2012-08-28mm: cma: fix alignment requirements for contiguous regionsMarek Szyprowski
Contiguous Memory Allocator requires each of its regions to be aligned in such a way that it is possible to change migration type for all pageblocks holding it and then isolate page of largest possible order from the buddy allocator (which is MAX_ORDER-1). This patch relaxes alignment requirements by one order, because MAX_ORDER alignment is not really needed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Michal Nazarewicz <mina86@mina86.com> Acked-by: Michal Nazarewicz <mina86@mina86.com>
2012-08-20Merge tag 'driver-core-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull one more driver core fix from Greg Kroah-Hartman: "Here is one fix for the dmesg line corruption problem that the previous set of patches caused. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: dyndbg: fix for SOH in logging messages
2012-08-18dyndbg: fix for SOH in logging messagesMarkus Trippelsdorf
commit af7f2158fde was done against master, and clashed with structured logging's change of KERN_LEVEL to SOH. Bisected and fixed by Markus Trippelsdorf. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Baron <jbaron@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-18Merge tag 'pm-for-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: - Fixes for three obscure problems in the runtime PM core code found recently. - Two fixes for the new "coupled" cpuidle code from Colin Cross and Jon Medhurst. - intel_idle driver fix from Konrad Rzeszutek Wilk. * tag 'pm-for-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it. cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify cpuidle: coupled: fix sleeping while atomic in cpu notifier PM / Runtime: Check device PM QoS setting before "no callbacks" check PM / Runtime: Clear power.deferred_resume on success in rpm_suspend() PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set
2012-08-17PM / Runtime: Check device PM QoS setting before "no callbacks" checkRafael J. Wysocki
If __dev_pm_qos_read_value(dev) returns a negative value, rpm_suspend() should return -EPERM for dev even if its power.no_callbacks flag is set. For this to happen, the device's power.no_callbacks flag has to be checked after the PM QoS check, so move the PM QoS check to rpm_check_suspend_allowed() (this will make it cover idle notifications as well as runtime suspend too). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
2012-08-17PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()Rafael J. Wysocki
The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
2012-08-17PM / Runtime: Fix rpm_resume() return value for power.no_callbacks setRafael J. Wysocki
For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
2012-08-17Merge tag 'driver-core-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are two tiny patches, one fixing a dynamic debug problem that the printk rework turned up, and the other one fixing an extcon problem that people reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: extcon: extcon_gpio: Replace gpio_request_one by devm_gpio_request_one drivers-core: make structured logging play nice with dynamic-debug
2012-08-16drivers-core: make structured logging play nice with dynamic-debugJim Cromie
commit c4e00daaa96d3a0786f1f4fe6456281c60ef9a16 changed __dev_printk in a way that broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..), but not dev_dbg(NULL,..) or pr_debug(..), which is why it wasnt noticed sooner. When dev==NULL, __dev_printk() just calls printk(), which just works. But otherwise, it assumed that level was always a string like "<L>" and just plucked out the 'L', ignoring the rest. However, dynamic_emit_prefix() adds "[tid] module:func:line:" to the string, those additions all got lost. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-08PM: Make dev_pm_get_subsys_data() always return 0 on successRafael J. Wysocki
Commits 1d5fcfec22 (PM / Domains: Add device domain data reference counter) and 62d4490294 (PM / Domains: Allow device callbacks to be added at any time) added checks for the return value of dev_pm_get_subsys_data(), but those checks were incorrect, because that function returned 1 on success in some cases. Since all of the existing users of dev_pm_get_subsys_data() don't use the positive value returned by it on success, change its definition so that it always returns 0 when successful. Reported-by: Heiko Stübner <heiko@sntech.de> Reported-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-07-31mm: factor out memory isolate functionsMinchan Kim
mm/page_alloc.c has some memory isolation functions but they are used only when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. So let's make it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge branch 'for-linus-for-3.6-rc1' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping updates from Marek Szyprowski: "Those patches are continuation of my earlier work. They contains extensions to DMA-mapping framework to remove limitation of the current ARM implementation (like limited total size of DMA coherent/write combine buffers), improve performance of buffer sharing between devices (attributes to skip cpu cache operations or creation of additional kernel mapping for some specific use cases) as well as some unification of the common code for dma_mmap_attrs() and dma_mmap_coherent() functions. All extensions have been implemented and tested for ARM architecture." * 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute ARM: dma-mapping: add support for dma_get_sgtable() common: dma-mapping: introduce dma_get_sgtable() function ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute common: dma-mapping: add support for generic dma_mmap_* calls ARM: dma-mapping: fix error path for memory allocation failure ARM: dma-mapping: add more sanity checks in arm_dma_mmap() ARM: dma-mapping: remove custom consistent dma region mm: vmalloc: use const void * for caller argument scatterlist: add sg_alloc_table_from_pages function
2012-07-30common: dma-mapping: introduce dma_get_sgtable() functionMarek Szyprowski
This patch adds dma_get_sgtable() function which is required to let drivers to share the buffers allocated by DMA-mapping subsystem. Right now the driver gets a dma address of the allocated buffer and the kernel virtual mapping for it. If it wants to share it with other device (= map into its dma address space) it usually hacks around kernel virtual addresses to get pointers to pages or assumes that both devices share the DMA address space. Both solutions are just hacks for the special cases, which should be avoided in the final version of buffer sharing. To solve this issue in a generic way, a new call to DMA mapping has been introduced - dma_get_sgtable(). It allocates a scatter-list which describes the allocated buffer and lets the driver(s) to use it with other device(s) by calling dma_map_sg() on it. This patch provides a generic implementation based on virt_to_page() call. Architectures which require more sophisticated translation might provide their own get_sgtable() methods. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-30common: dma-mapping: add support for generic dma_mmap_* callsMarek Szyprowski
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a generic method for implementing mmap user call to dma_map_ops structure. This patch converts ARM and PowerPC architectures (the only providers of dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic dma_map_ops based call and adds a generic cross architecture definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine functions. The generic mmap virt_to_page-based fallback implementation is provided for architectures which don't provide their own implementation for mmap method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-29new helper: done_path_create()Al Viro
releases what needs to be released after {kern,user}_path_create() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-26Merge tag 'driver-core-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
2012-07-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...
2012-07-23Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull the big VFS changes from Al Viro: "This one is *big* and changes quite a few things around VFS. What's in there: - the first of two really major architecture changes - death to open intents. The former is finally there; it was very long in making, but with Miklos getting through really hard and messy final push in fs/namei.c, we finally have it. Unlike his variant, this one doesn't introduce struct opendata; what we have instead is ->atomic_open() taking preallocated struct file * and passing everything via its fields. Instead of returning struct file *, it returns -E... on error, 0 on success and 1 in "deal with it yourself" case (e.g. symlink found on server, etc.). See comments before fs/namei.c:atomic_open(). That made a lot of goodies finally possible and quite a few are in that pile: ->lookup(), ->d_revalidate() and ->create() do not get struct nameidata * anymore; ->lookup() and ->d_revalidate() get lookup flags instead, ->create() gets "do we want it exclusive" flag. With the introduction of new helper (kern_path_locked()) we are rid of all struct nameidata instances outside of fs/namei.c; it's still visible in namei.h, but not for long. Come the next cycle, declaration will move either to fs/internal.h or to fs/namei.c itself. [me, miklos, hch] - The second major change: behaviour of final fput(). Now we have __fput() done without any locks held by caller *and* not from deep in call stack. That obviously lifts a lot of constraints on the locking in there. Moreover, it's legal now to call fput() from atomic contexts (which has immediately simplified life for aio.c). We also don't need anti-recursion logics in __scm_destroy() anymore. There is a price, though - the damn thing has become partially asynchronous. For fput() from normal process we are guaranteed that pending __fput() will be done before the caller returns to userland, exits or gets stopped for ptrace. For kernel threads and atomic contexts it's done via schedule_work(), so theoretically we might need a way to make sure it's finished; so far only one such place had been found, but there might be more. There's flush_delayed_fput() (do all pending __fput()) and there's __fput_sync() (fput() analog doing __fput() immediately). I hope we won't need them often; see warnings in fs/file_table.c for details. [me, based on task_work series from Oleg merged last cycle] - sync series from Jan - large part of "death to sync_supers()" work from Artem; the only bits missing here are exofs and ext4 ones. As far as I understand, those are going via the exofs and ext4 trees resp.; once they are in, we can put ->write_super() to the rest, along with the thread calling it. - preparatory bits from unionmount series (from dhowells). - assorted cleanups and fixes all over the place, as usual. This is not the last pile for this cycle; there's at least jlayton's ESTALE work and fsfreeze series (the latter - in dire need of fixes, so I'm not sure it'll make the cut this cycle). I'll probably throw symlink/hardlink restrictions stuff from Kees into the next pile, too. Plus there's a lot of misc patches I hadn't thrown into that one - it's large enough as it is..." * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits) ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file() btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file() switch dentry_open() to struct path, make it grab references itself spufs: shift dget/mntget towards dentry_open() zoran: don't bother with struct file * in zoran_map ecryptfs: don't reinvent the wheels, please - use struct completion don't expose I_NEW inodes via dentry->d_inode tidy up namei.c a bit unobfuscate follow_up() a bit ext3: pass custom EOF to generic_file_llseek_size() ext4: use core vfs llseek code for dir seeks vfs: allow custom EOF in generic_file_llseek code vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes vfs: Remove unnecessary flushing of block devices vfs: Make sys_sync writeout also block device inodes vfs: Create function for iterating over block devices vfs: Reorder operations during sys_sync quota: Move quota syncing to ->sync_fs method quota: Split dquot_quota_sync() to writeback and cache flushing part vfs: Move noop_backing_dev_info check from sync into writeback ...
2012-07-22Merge tag 'pm-for-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: - ACPI conversion to PM handling based on struct dev_pm_ops. - Conversion of a number of platform drivers to PM handling based on struct dev_pm_ops and removal of empty legacy PM callbacks from a couple of PCI drivers. - Suspend-to-both for in-kernel hibernation from Bojan Smojver. - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti Murthy. - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd. - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross. - Generic PM domains framework updates. - RTC CMOS wakeup signaling update from Paul Fox. - sparse warnings fixes from Sachin Kamat. - Build warnings fixes for the generic PM domains framework and PM sysfs code. - sysfs switch for printing device suspend times from Sameer Nanda. - Documentation fix from Oskar Schirmer. * tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits) cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch EXYNOS: bugfix on retrieving old_index from freqs.old PM / Sleep: call early resume handlers when suspend_noirq fails PM / QoS: Use NULL pointer instead of plain integer in qos.c PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock PM / Sleep: Add missing static storage class specifiers in main.c cpuilde / ACPI: remove time from acpi_processor_cx structure cpuidle / ACPI: remove usage from acpi_processor_cx structure cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure rtc-cmos: report wakeups from interrupt handler PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset olpc-xo15-sci: Use struct dev_pm_ops for power management PM / Domains: Replace plain integer with NULL pointer in domain.c file PM / Domains: Add missing static storage class specifier in domain.c file PM / crypto / ux500: Use struct dev_pm_ops for power management PM / IPMI: Remove empty legacy PCI PM callbacks tpm_nsc: Use struct dev_pm_ops for power management tpm_tis: Use struct dev_pm_ops for power management ...
2012-07-22Merge tag 'regmap-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A few fixes plus a few features, the most generally useful thing being the register paging support which can be used by quite a few devices: - Support for wake IRQs in regmap-irq - Support for register paging - Support for explicitly specified endianness, mostly for MMIO." * tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix incorrect arguments to kzalloc() call regmap: Add hook for printk logging for debugging during early init regmap: Fix work_buf switching for page update during virtual range access. regmap: Add support for register indirect addressing. regmap: Move lock out from internal function _regmap_update_bits(). regmap: mmio: Staticize regmap_mmio_gen_context() regmap: Remove warning on stubbed dev_get_regmap() regmap: Implement support for wake IRQs regmap: Don't try to map non-existant IRQs regmap: Constify regmap_irq_chip regmap: mmio: request native endian formatting regmap: allow busses to request formatting with specific endianness
2012-07-22Merge branches 'regmap-core', 'regmap-irq' and 'regmap-page' into regmap-nextMark Brown
Conflicts (trivial context stuff): drivers/base/regmap/regmap.c include/linux/regmap.h
2012-07-20[SCSI] cleanup usages of scsi_complete_async_scansDan Williams
Now that scsi registers its async scan work with the async subsystem, wait_for_device_probe() is sufficient for ensuring all scanning is complete. [jejb: fix merge problems with eea03c20ae38 Make wait_for_device_probe() also do scsi_complete_async_scans()] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-19Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Sleep: call early resume handlers when suspend_noirq fails
2012-07-19PM / Sleep: call early resume handlers when suspend_noirq failsColin Cross
Commit cf579dfb82550e34de7ccf3ef090d8b834ccd3a9 (PM / Sleep: Introduce "late suspend" and "early resume" of devices) introduced a bug where suspend_late handlers would be called, but if dpm_suspend_noirq returned an error the early_resume handlers would never be called. All devices would end up on the dpm_late_early_list, and would never be resumed again. Fix it by calling dpm_resume_early when dpm_suspend_noirq returns an error. Signed-off-by: Colin Cross <ccross@android.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-18Make wait_for_device_probe() also do scsi_complete_async_scans()Linus Torvalds
Commit a7a20d103994 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d0137 ("fix async probe regression"), so that same commit a7a20d103994 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-19Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: PM / QoS: Use NULL pointer instead of plain integer in qos.c PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
2012-07-19Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock PM / Sleep: Add missing static storage class specifiers in main.c PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset PM / Hibernate: Print hibernation/thaw progress indicator one line at a time. PM / Sleep: Separate printing suspend times from initcall_debug PM / Sleep: add knob for printing device resume times ftrace: Disable function tracing during suspend/resume and hibernation, again PM / Hibernate: Enable suspend to both for in-kernel hibernation.
2012-07-19Merge branch 'pm-domains'Rafael J. Wysocki
* pm-domains: PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset PM / Domains: Replace plain integer with NULL pointer in domain.c file PM / Domains: Add missing static storage class specifier in domain.c file PM / Domains: Allow device callbacks to be added at any time PM / Domains: Add device domain data reference counter PM / Domains: Add preliminary support for cpuidle, v2 PM / Domains: Do not stop devices after restoring their states PM / Domains: Use subsystem runtime suspend/resume callbacks by default
2012-07-19PM / QoS: Use NULL pointer instead of plain integer in qos.cSachin Kamat
Fix the following sparse warning: drivers/base/power/qos.c:465:29: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-18PM / Sleep: Add missing static storage class specifiers in main.cSachin Kamat
Fix the following sparse warnings: drivers/base/power/main.c:48:1: warning: symbol 'dpm_prepared_list' was not declared. Should it be static? drivers/base/power/main.c:49:1: warning: symbol 'dpm_suspended_list' was not declared. Should it be static? drivers/base/power/main.c:50:1: warning: symbol 'dpm_late_early_list' was not declared. Should it be static? drivers/base/power/main.c:51:1: warning: symbol 'dpm_noirq_list' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-18regmap: Fix incorrect arguments to kzalloc() callDimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-17driver core: don't trigger uevent after failureSebastian Ott
Do not send the uevent if driver_add_groups failed. Reported-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16PM / Runtime: Do not increment device usage counts before probingRafael J. Wysocki
The pm_runtime_get_noresume() calls before really_probe() and before executing __device_attach() for each driver on the device's bus cause problems to happen if probing fails and if the driver has enabled runtime PM for the device in its .probe() callback. Namely, in that case, if the device has been resumed by the driver after enabling its runtime PM and if it turns out that .probe() should return an error, the driver is supposed to suspend the device and disable its runtime PM before exiting .probe(). However, because the device's runtime PM usage counter was incremented by the core before calling .probe(), the driver's attempt to suspend the device will not succeed and the device will remain in the full-power state after the failing .probe() has returned. To fix this issue, remove the pm_runtime_get_noresume() calls from driver_probe_device() and from device_attach() and replace the corresponding pm_runtime_put_sync() calls with pm_runtime_idle() to preserve the existing behavior (which is to check if the device is idle and to suspend it eventually in that case after probing). Reported-and-tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16driver-core: Use kobj_to_dev instead of re-implementing itLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16driver core: Move deferred devices to the end of dpm_list before probingMark Brown
When deferred probe was originally added the idea was that devices which defer their probes would move themselves to the end of dpm_list in order to try to keep the assumptions that we're making about the list being in roughly the order things should be suspended correct. However this hasn't been what's been happening and doing it requires a lot of duplicated code to do the moves. Instead take a simple, brute force solution and have the deferred probe code push devices to the end of dpm_list before it retries the probe. This does mean we lock the dpm_list a bit more often but it's very simple and the code shouldn't be a fast path. We do the move with the deferred mutex dropped since doing things with fewer locks held simultaneously seems like a good idea. This approach was most recently suggested by Grant Likely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Grant Likely <grant.likely@secretlab.ca>, Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16driver core: move uevent call to driver_registerSebastian Ott
Device driver attribute groups are created after userspace is notified via an add event. Fix this by moving the kobject_uevent call to driver_register after the attribute groups are added. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16driver core: fix shutdown races with probe/remove(v3)Ming Lei
Firstly, .shutdown callback may touch a uninitialized hardware if dev->driver is set and .probe is not completed. Secondly, device_shutdown() may dereference a null pointer to cause oops when dev->driver is cleared after it has been checked in device_shutdown(). So just hold device lock and its parent lock(if it has) to fix the races. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-14get rid of kern_path_parent()Al Viro
all callers want the same thing, actually - a kinda-sorta analog of kern_path_create(). I.e. they want parent vfsmount/dentry (with ->i_mutex held, to make sure the child dentry is still their child) + the child dentry. Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2012-07-12PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unsetRafael J. Wysocki
The power/async device sysfs attribute is only used if both CONFIG_PM_ADVANCED_DEBUG and CONFIG_PM_SLEEP are set, but the code implementing it doesn't depend on CONFIG_PM_SLEEP. As a result, a build warning appears if CONFIG_PM_ADVANCED_DEBUG is set and CONFIG_PM_SLEEP is not set. Fix it by adding a #ifdef CONFIG_PM_SLEEP around the code in question. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-12PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unsetRafael J. Wysocki
The functions genpd_save_dev() and genpd_restore_dev() are not used for CONFIG_PM_RUNTIME unset, so move them under an appropriate #ifdef. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-11PM / Domains: Replace plain integer with NULL pointer in domain.c fileSachin Kamat
Fixes the following sparse warning: drivers/base/power/domain.c:1679:55: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-10PM / Domains: Add missing static storage class specifier in domain.c fileSachin Kamat
Fixes the folloiwng sparse warning: drivers/base/power/domain.c:149:5: warning: symbol '__pm_genpd_poweron' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-10PM / cpuidle: System resume hang fix with cpuidlePreeti U Murthy
On certain bios, resume hangs if cpus are allowed to enter idle states during suspend [1]. This was fixed in apci idle driver [2].But intel_idle driver does not have this fix. Thus instead of replicating the fix in both the idle drivers, or in more platform specific idle drivers if needed, the more general cpuidle infrastructure could handle this. A suspend callback in cpuidle_driver could handle this fix. But a cpuidle_driver provides only basic functionalities like platform idle state detection capability and mechanisms to support entry and exit into CPU idle states. All other cpuidle functions are found in the cpuidle generic infrastructure for good reason that all cpuidle drivers, irrepective of their platforms will support these functions. One option therefore would be to register a suspend callback in cpuidle which handles this fix. This could be called through a PM_SUSPEND_PREPARE notifier. But this is too generic a notfier for a driver to handle. Also, ideally the job of cpuidle is not to handle side effects of suspend. It should expose the interfaces which "handle cpuidle 'during' suspend" or any other operation, which the subsystems call during that respective operation. The fix demands that during suspend, no cpus should be allowed to enter deep C-states. The interface cpuidle_uninstall_idle_handler() in cpuidle ensures that. Not just that it also kicks all the cpus which are already in idle out of their idle states which was being done during cpu hotplug through a CPU_DYING_FROZEN callbacks. Now the question arises about when during suspend should cpuidle_uninstall_idle_handler() be called. Since we are dealing with drivers it seems best to call this function during dpm_suspend(). Delaying the call till dpm_suspend_noirq() does no harm, as long as it is before cpu_hotplug_begin() to avoid race conditions with cpu hotpulg operations. In dpm_suspend_noirq(), it would be wise to place this call before suspend_device_irqs() to avoid ugly interactions with the same. Ananlogously, during resume. References: [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674075. [2] http://marc.info/?l=linux-pm&m=133958534231884&w=2 Reported-and-tested-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-06regmap: Add hook for printk logging for debugging during early initMark Brown
Sometimes for failures during very early init the trace infrastructure isn't available early enough to be used. For this sort of problem defining LOG_DEVICE will add printks for basic register I/O on a specific device, allowing trace to be extracted when the trace system doesn't come up early enough to work with. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05PM / Domains: Allow device callbacks to be added at any timeRafael J. Wysocki
Make it possible to modify device callbacks used by the generic PM domains core code at any time, not only after the device has been added to a domain. This will allow device drivers to provide their own device PM domain callbacks even if they are registered before adding the devices to PM domains. For this purpose, use the observation that the struct generic_pm_domain_data object containing the relevant callback pointers may be allocated by pm_genpd_add_callbacks() and the callbacks may be set before __pm_genpd_add_device() is run for the given device. This object will then be used by __pm_genpd_add_device(), but it has to be protected from premature removal by reference counting. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-05PM / Domains: Add device domain data reference counterRafael J. Wysocki
Add a mechanism for counting references to the struct generic_pm_domain_data object pointed to by dev->power.subsys_data->domain_data if the device in question belongs to a generic PM domain. This change is necessary for a subsequent patch making it possible to allocate that object from within pm_genpd_add_callbacks(), so that drivers can attach their PM domain device callbacks to devices before those devices are added to PM domains. This patch has been tested on the SH7372 Mackerel board. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-05Merge v3.5-rc5 into driver-core-nextGreg Kroah-Hartman
This picks up the big printk fixes, and resolves a merge issue with: drivers/extcon/extcon_gpio.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-03PM / Domains: Add preliminary support for cpuidle, v2Rafael J. Wysocki
On some systems there are CPU cores located in the same power domains as I/O devices. Then, power can only be removed from the domain if all I/O devices in it are not in use and the CPU core is idle. Add preliminary support for that to the generic PM domains framework. First, the platform is expected to provide a cpuidle driver with one extra state designated for use with the generic PM domains code. This state should be initially disabled and its exit_latency value should be set to whatever time is needed to bring up the CPU core itself after restoring power to it, not including the domain's power on latency. Its .enter() callback should point to a procedure that will remove power from the domain containing the CPU core at the end of the CPU power transition. The remaining characteristics of the extra cpuidle state, referred to as the "domain" cpuidle state below, (e.g. power usage, target residency) should be populated in accordance with the properties of the hardware. Next, the platform should execute genpd_attach_cpuidle() on the PM domain containing the CPU core. That will cause the generic PM domains framework to treat that domain in a special way such that: * When all devices in the domain have been suspended and it is about to be turned off, the states of the devices will be saved, but power will not be removed from the domain. Instead, the "domain" cpuidle state will be enabled so that power can be removed from the domain when the CPU core is idle and the state has been chosen as the target by the cpuidle governor. * When the first I/O device in the domain is resumed and __pm_genpd_poweron(() is called for the first time after power has been removed from the domain, the "domain" cpuidle state will be disabled to avoid subsequent surprise power removals via cpuidle. The effective exit_latency value of the "domain" cpuidle state depends on the time needed to bring up the CPU core itself after restoring power to it as well as on the power on latency of the domain containing the CPU core. Thus the "domain" cpuidle state's exit_latency has to be recomputed every time the domain's power on latency is updated, which may happen every time power is restored to the domain, if the measured power on latency is greater than the latency stored in the corresponding generic_pm_domain structure. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-07-01PM / Domains: Do not stop devices after restoring their statesRafael J. Wysocki
While resuming a device belonging to a PM domain, pm_genpd_runtime_resume() calls __pm_genpd_restore_device() to restore its state, if necessary. The latter starts the device, using genpd_start_dev(), restores its state, using genpd_restore_dev(), and then stops it, using genpd_stop_dev(). However, this last operation is not necessary, because the device is supposed to be operational after pm_genpd_runtime_resume() has returned and because of it pm_genpd_runtime_resume() has to call genpd_start_dev() once again for the "restored" device, which is inefficient. To make things more efficient, remove the call to genpd_stop_dev() from __pm_genpd_restore_device() and the direct call to genpd_start_dev() from pm_genpd_runtime_resume(). [Of course, genpd_start_dev() still has to be called by it for devices with the power.irq_safe flag set, because __pm_genpd_restore_device() is not executed for them.] This change has been tested on the SH7372 Mackerel board. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>