summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2012-05-10connector/userns: replace netlink uses of cap_raised() with capable()Eric W. Biederman
In 2009 Philip Reiser notied that a few users of netlink connector interface needed a capability check and added the idiom cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise that netlink was asynchronous. In 2011 Patrick McHardy noticed we were being silly because netlink is synchronous and removed eff_cap from the netlink_skb_params and changed the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN). Looking at those spots with a fresh eye we should be calling capable(CAP_SYS_ADMIN). The only reason I can see for not calling capable is that it once appeared we were not in the same task as the caller which would have made calling capable() impossible. In the initial user_namespace the only difference between between cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets PF_SUPERPRIV if we use the capability. Since we are going to be using root privilege setting PF_SUPERPRIV seems the right thing to do. The motivation for this that patch is that in a child user namespace cap_raised(current_cap(),...) tests your capabilities with respect to that child user namespace not capabilities in the initial user namespace and thus will allow processes that should be unprivielged to use the kernel services that are only protected with cap_raised(current_cap(),..). To fix possible user_namespace issues and to just clean up the code replace cap_raised(current_cap(), CAP_SYS_ADMIN) with capable(CAP_SYS_ADMIN). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-20Merge tag 'stable/for-linus-3.4-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: - mechanism to work with misconfigured backends (where they are advertised but in reality don't exist). - two tiny compile warning fixes. - proper error handling in gnttab_resume - Not using VM_PFNMAP anymore to allow backends in the same domain. * tag 'stable/for-linus-3.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen/p2m: m2p_find_override: use list_for_each_entry_safe" xen/resume: Fix compile warnings. xen/xenbus: Add quirk to deal with misconfigured backends. xen/blkback: Fix warning error. xen/p2m: m2p_find_override: use list_for_each_entry_safe xen/gntdev: do not set VM_PFNMAP xen/grant-table: add error-handling code on failure of gnttab_resume
2012-04-18xen/blkback: Fix warning error.Konrad Rzeszutek Wilk
drivers/block/xen-blkback/xenbus.c: In function 'xen_blkbk_discard': drivers/block/xen-blkback/xenbus.c:419:4: warning: passing argument 1 of 'dev_warn' makes pointer from integer without a cast +[enabled by default] include/linux/device.h:894:5: note: expected 'const struct device *' but argument is of type 'long int' It is unclear how that mistake made it in. It surely is wrong. Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael S. Tsirkin: "Here are some virtio fixes for 3.4: a test build fix, a patch by Ren fixing naming for systems with a massive number of virtio blk devices, and balloon fixes for powerpc by David Gibson. There was some discussion about Ren's patch for virtio disc naming: some people wanted to move the legacy name mangling function to the block core. But there's no concensus on that yet, and we can always deduplicate later. Added comments in the hope that this will stop people from copying this legacy naming scheme into future drivers." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix handling of PAGE_SIZE != 4k virtio_balloon: Fix endian bug virtio_blk: helper function to format disk names tools/virtio: fix up vhost/test module build
2012-04-13Merge branch 'for-3.4/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver bits from Jens Axboe: - A series of fixes for mtip32xx. Most from Asai at Micron, but also one from Greg, getting rid of the dependency on PCIE_HOTPLUG. - A few bug fixes for xen-blkfront, and blkback. - A virtio-blk fix for Vivek, making resize actually work. - Two fixes from Stephen, making larger transfers possible on cciss. This is needed for tape drive support. * 'for-3.4/drivers' of git://git.kernel.dk/linux-block: block: mtip32xx: remove HOTPLUG_PCI_PCIE dependancy mtip32xx: dump tagmap on failure mtip32xx: fix handling of commands in various scenarios mtip32xx: Shorten macro names mtip32xx: misc changes mtip32xx: Add new sysfs entry 'status' mtip32xx: make setting comp_time as common mtip32xx: Add new bitwise flag 'dd_flag' mtip32xx: fix error handling in mtip_init() virtio-blk: Call revalidate_disk() upon online disk resize xen/blkback: Make optional features be really optional. xen/blkback: Squash the discard support for 'file' and 'phy' type. mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port() cciss: Fix scsi tape io with more than 255 scatter gather elements cciss: Initialize scsi host max_sectors for tape drive support xen-blkfront: make blkif_io_lock spinlock per-device xen/blkfront: don't put bdev right after getting it xen-blkfront: use bitmap_set() and bitmap_clear() xen/blkback: Enable blkback on HVM guests xen/blkback: use grant-table.c hypercall wrappers
2012-04-12virtio_blk: helper function to format disk namesRen Mingxin
The current virtio block's naming algorithm just supports 18278 (26^3 + 26^2 + 26) disks. If there are more virtio blocks, there will be disks with the same name. Based on commit 3e1a7ff8a0a7b948f2684930166954f9e8e776fe, add a function "virtblk_name_format()" for virtio block to support mass of disks naming. Notes: - Our naming scheme is ugly. We are stuck with it for virtio but don't use it for any new driver: new drivers should name their devices PREFIX%d where the sequence number can be allocated by ida - sd_format_disk_name has exactly the same logic. Moving it to a central place was deferred over worries that this will make people keep using the legacy naming in new drivers. We kept code idential in case someone wants to deduplicate later. Signed-off-by: Ren Mingxin <renmx@cn.fujitsu.com> Acked-by: Asias He <asias@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-12block: mtip32xx: remove HOTPLUG_PCI_PCIE dependancyGreg Kroah-Hartman
This removes the HOTPLUG_PCI_PCIE dependency on the driver and makes it depend on PCI. Cc: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: dump tagmap on failureAsai Thambi S P
Dump tagmap on failure, instead of individual tags. Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: fix handling of commands in various scenariosAsai Thambi S P
* If a ncq command time out and a non-ncq command is active, skip restart port * Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode * When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back * Changed timeout for download microcode and smart commands * If the device in write protect mode, fail all writes (do not send to device) * Set maximum retries to 2 Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Shorten macro namesAsai Thambi S P
Shortened macros used to represent mtip_port->flags and dd->dd_flag Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: misc changesAsai Thambi S P
* Handle the interrupt completion of polled internal commands * Do not check remove pending flag for standby command * On rebuild failure, - set corresponding bit dd_flag - do not send standby command * Free ida index in remove path Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Add new sysfs entry 'status'Asai Thambi S P
* Add support for detecting the following device status - write protect - over temp (thermal shutdown) * Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown * Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman) Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: make setting comp_time as commonAsai Thambi S P
Moved setting completion time into mtip_issue_ncq_command() Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09mtip32xx: Add new bitwise flag 'dd_flag'Asai Thambi S P
* Merged the following flags into one variable 'dd_flag': * drv_cleanup_done * resumeflag * Added the following flags into 'dd_flag' * remove pending * init done * Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags) Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-06Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-06xen: only check xen_platform_pci_unplug if hvmIgor Mammedov
commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-05mtip32xx: fix error handling in mtip_init()Ryosuke Saito
Ensure that block device is properly unregistered, if pci_register_driver() fails. Signed-off-by: Ryosuke Saito <raitosyo@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-30x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facilityLen Brown
The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax() - essentially it turned off the use of HLT. This workaround was commented in the code as: "disable hlt during certain critical i/o operations" "This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove." H. Peter Anvin additionally adds: "To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail. They were by far in the minority even back then." Alan Cox further says: "Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray. Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use." So, let's finally drop this. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephen Hemminger <shemminger@vyatta.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org [ If anyone cares then alternative instruction patching could be used to replace HLT with a one-byte NOP instruction. Much simpler. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-29virtio-blk: Call revalidate_disk() upon online disk resizeVivek Goyal
If a virtio disk is open in guest and a disk resize operation is done, (virsh blockresize), new size is not visible to tools like "fdisk -l". This seems to be happening as we update only part->nr_sects and not bdev->bd_inode size. Call revalidate_disk() which should take care of it. I tested growing disk size of already open disk and it works for me. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-28Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge third batch of patches from Andrew Morton: - Some MM stragglers - core SMP library cleanups (on_each_cpu_mask) - Some IPI optimisations - kexec - kdump - IPMI - the radix-tree iterator work - various other misc bits. "That'll do for -rc1. I still have ~10 patches for 3.4, will send those along when they've baked a little more." * emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits) backlight: fix typo in tosa_lcd.c crc32: add help text for the algorithm select option mm: move hugepage test examples to tools/testing/selftests/vm mm: move slabinfo.c to tools/vm mm: move page-types.c from Documentation to tools/vm selftests/Makefile: make `run_tests' depend on `all' selftests: launch individual selftests from the main Makefile radix-tree: use iterators in find_get_pages* functions radix-tree: rewrite gang lookup using iterator radix-tree: introduce bit-optimized iterator fs/proc/namespaces.c: prevent crash when ns_entries[] is empty nbd: rename the nbd_device variable from lo to nbd pidns: add reboot_pid_ns() to handle the reboot syscall sysctl: use bitmap library functions ipmi: use locks on watchdog timeout set on reboot ipmi: simplify locking ipmi: fix message handling during panics ipmi: use a tasklet for handling received messages ipmi: increase KCS timeouts ipmi: decrease the IPMI message transaction time in interrupt mode ...
2012-03-28nbd: rename the nbd_device variable from lo to nbdWanlong Gao
rename the nbd_device variable from "lo" to "nbd", since "lo" is just a name copied from loop.c. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull a few more things for powerpc by Benjamin Herrenschmidt: - Anton's did some recent improvements to EPOW event reporting on pSeries (power supply failures and such). The patches are self contained enough and replace really nasty code so I felt it should still go in - I did the vio driver registration change Greg requested, I don't see the point of leaving that til the next merge window - The remaining EEH changes I said were still pending to get rid of the EEH references from the generic struct device_node - A few more iSeries removal bits - A perf bug fix on 970 * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: Fix instruction address sampling on 970 and Power4 powerpc+sparc/vio: Modernize driver registration powerpc: Random little legacy iSeries removal tidy ups powerpc: Remove NO_IRQ_IGNORE powerpc/pseries: Cut down on enthusiastic use of defines in RAS code powerpc/pseries: Clean up ras_error_interrupt code powerpc/pseries: Remove RTAS_POWERMGM_EVENTS powerpc/pseries: Use rtas_get_sensor in RAS code powerpc/pseries: Parse and handle EPOW interrupts powerpc: Make function that parses RTAS error logs global powerpc/eeh: Retrieve PHB from global list powerpc/eeh: Remove eeh information from pci_dn powerpc/eeh: Remove eeh device from OF node
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates for 3.4-rc1 from Sage Weil: "Alex has been busy. There are a range of rbd and libceph cleanups, especially surrounding device setup and teardown, and a few critical fixes in that code. There are more cleanups in the messenger code, virtual xattrs, a fix for CRC calculation/checks, and lots of other miscellaneous stuff. There's a patch from Amon Ott to make inos behave a bit better on 32-bit boxes, some decode check fixes from Xi Wang, and network throttling fix from Jim Schutt, and a couple RBD fixes from Josh Durgin. No new functionality, just a lot of cleanup and bug fixing." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (65 commits) rbd: move snap_rwsem to the device, rename to header_rwsem ceph: fix three bugs, two in ceph_vxattrcb_file_layout() libceph: isolate kmap() call in write_partial_msg_pages() libceph: rename "page_shift" variable to something sensible libceph: get rid of zero_page_address libceph: only call kernel_sendpage() via helper libceph: use kernel_sendpage() for sending zeroes libceph: fix inverted crc option logic libceph: some simple changes libceph: small refactor in write_partial_kvec() libceph: do crc calculations outside loop libceph: separate CRC calculation from byte swapping libceph: use "do" in CRC-related Boolean variables ceph: ensure Boolean options support both senses libceph: a few small changes libceph: make ceph_tcp_connect() return int libceph: encapsulate some messenger cleanup code libceph: make ceph_msgr_wq private libceph: encapsulate connection kvec operations libceph: move prepare_write_banner() ...
2012-03-28powerpc+sparc/vio: Modernize driver registrationBenjamin Herrenschmidt
This makes vio_register_driver() get the module owner & name at compile time like PCI drivers do, and adds a name pointer directly in struct vio_driver to avoid having to explicitly initialize the embedded struct device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-03-26Merge branch 'stable/for-jens-3.4-bugfixes' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-3.4/drivers Konrad writes: I've two small fixes for the xen-blkback - and I think one more will show up eventually (a partial revert), but not sure when. So in the spirit of keeping the patches flowing, please git pull the following branch.
2012-03-24Merge tag 'stable/for-linus-3.4-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull more xen updates from Konrad Rzeszutek Wilk: "One tiny feature that accidentally got lost in the initial git pull: * Add fast-EOI acking of interrupts (clear a bit instead of hypercall) And bug-fixes: * Fix CPU bring-up code missing a call to notify other subsystems. * Fix reading /sys/hypervisor even if PVonHVM drivers are not loaded. * In Xen ACPI processor driver: remove too verbose WARN messages, fix up the Kconfig dependency to be a module by default, and add dependency on CPU_FREQ. * Disable CPU frequency drivers from loading when booting under Xen (as we want the Xen ACPI processor to be used instead). * Cleanups in tmem code." * tag 'stable/for-linus-3.4-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: Fix Kconfig dependency on CPU_FREQ xen: initialize platform-pci even if xen_emul_unplug=never xen/smp: Fix bringup bug in AP code. xen/acpi: Remove the WARN's as they just create noise. xen/tmem: cleanup xen: support pirq_eoi_map xen/acpi-processor: Do not depend on CPU frequency scaling drivers. xen/cpufreq: Disable the cpu frequency scaling drivers from loading. provide disable_cpufreq() function to disable the API.
2012-03-24xen/blkback: Make optional features be really optional.Konrad Rzeszutek Wilk
They were using the xenbus_dev_fatal() function which would change the state of the connection immediately. Which is not what we want when we advertise optional features. So make 'feature-discard','feature-barrier','feature-flush-cache' optional. Suggested-by: Jan Beulich <JBeulich@suse.com> [v1: Made the discard function void and static] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-24xen/blkback: Squash the discard support for 'file' and 'phy' type.Konrad Rzeszutek Wilk
The only reason for the distinction was for the special case of 'file' (which is assumed to be loopback device), was to reach inside the loopback device, find the underlaying file, and call fallocate on it. Fortunately "xen-blkback: convert hole punching to discard request on loop devices" removes that use-case and we now based the discard support based on blk_queue_discard(q) and extract all appropriate parameters from the 'struct request_queue'. CC: Li Dongyang <lidongyang@novell.com> Acked-by: Jan Beulich <JBeulich@suse.com> [v1: Dropping pointless initializer and keeping blank line] [v2: Remove the kfree as it is not used anymore] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-23usermodehelper: use UMH_WAIT_PROC consistentlyOleg Nesterov
A few call_usermodehelper() callers use the hardcoded constant instead of the proper UMH_WAIT_PROC, fix them. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Januszewski <spock@gentoo.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize ↵Asai Thambi S P
and start port in mtip_restart_port() This patch includes two changes: * fix incorrect value set for drv_cleanup_done * re-initialize and start port in mtip_restart_port() Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-22cciss: Fix scsi tape io with more than 255 scatter gather elementsStephen M. Cameron
The total number of scatter gather elements in the CISS command used by the scsi tape code was being cast to a u8, which can hold at most 255 scatter gather elements. It should have been cast to a u16. Without this patch the command gets rejected by the controller since the total scatter gather count did not add up to the right value resulting in an i/o error. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-22cciss: Initialize scsi host max_sectors for tape drive supportStephen M. Cameron
The default is too small (1024 blocks), use h->cciss_max_sectors (8192 blocks) Without this change, if you try to set the block size of a tape drive above 512*1024, via "mt -f /dev/st0 setblk nnn" where nnn is greater than 524288, it won't work right. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-22rbd: move snap_rwsem to the device, rename to header_rwsemJosh Durgin
A new temporary header is allocated each time the header changes, but only the changed properties are copied over. We don't need a new semaphore for each header update. This addresses http://tracker.newdream.net/issues/2174 Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: don't drop the rbd_id too earlyAlex Elder
Currently an rbd device's id is released when it is removed, but it is done before the code is run to clean up sysfs-related files (such as /sys/bus/rbd/devices/1). It's possible that an rbd is still in use after the rbd_remove() call has been made. It's essentially the same as an active inode that stays around after it has been removed--until its final close operation. This means that the id shows up as free for reuse at a time it should not be. The effect of this was seen by Jens Rehpoehler, who: - had a filesystem mounted on an rbd device - unmapped that filesystem (without unmounting) - found that the mount still worked properly - but hit a panic when he attempted to re-map a new rbd device This re-map attempt found the previously-unmapped id available. The subsequent attempt to reuse it was met with a panic while attempting to (re-)install the sysfs entry for the new mapped device. Fix this by holding off "putting" the rbd id, until the rbd_device release function is called--when the last reference is finally dropped. Note: This fixes: http://tracker.newdream.net/issues/1907 Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: small changesAlex Elder
Here is another set of small code tidy-ups: - Define SECTOR_SHIFT and SECTOR_SIZE, and use these symbolic names throughout. Tell the blk_queue system our physical block size, in the (unlikely) event we want to use something other than the default. - Delete the definition of struct rbd_info, which is never used. - Move the definition of dev_to_rbd() down in its source file, just above where it gets first used, and change its name to dev_to_rbd_dev(). - Replace an open-coded operation in rbd_dev_release() to use dev_to_rbd_dev() instead. - Calculate the segment size for a given rbd_device just once in rbd_init_disk(). - Use the '%zd' conversion specifier in rbd_snap_size_show(), since the value formatted is a size_t. - Switch to the '%llu' conversion specifier in rbd_snap_id_show(). since the value formatted is unsigned. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: do some refactoringAlex Elder
A few blocks of code are rearranged a bit here: - In rbd_header_from_disk(): - Don't bother computing snap_count until we're sure the on-disk header starts with a good signature. - Move a few independent lines of code so they are *after* a check for a failed memory allocation. - Get rid of unnecessary local variable "ret". - Make a few other changes in rbd_read_header(), similar to the above--just moving things around a bit while preserving the functionality. - In rbd_rq_fn(), just assign rq in the while loop's controlling expression rather than duplicating it before and at the end of the loop body. This allows the use of "continue" rather than "goto next" in a number of spots. - Rearrange the logic in snap_by_name(). End result is the same. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: fix module sysfs setup/teardown codeAlex Elder
Once rbd_bus_type is registered, it allows an "add" operation via the /sys/bus/rbd/add bus attribute, and adding a new rbd device that way establishes a connection between the device and rbd_root_dev. But rbd_root_dev is not registered until after the rbd_bus_type registration is complete. This could (in principle anyway) result in an invalid state. Since rbd_root_dev has no tie to rbd_bus_type we can reorder these two initializations and never be faced with this scenario. In addition, unregister the device in the event the bus registration fails at module init time. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: don't allocate mon_addrs buffer in rbd_add()Alex Elder
The mon_addrs buffer in rbd_add is used to hold a copy of the monitor IP addresses supplied via /sys/bus/rbd/add. That is passed to rbd_get_client(), which never modifies it (nor do any of the functions it gets passed to thereafter)--the mon_addr parameter to rbd_get_client() is a pointer to constant data, so it can't be modifed. Furthermore, rbd_get_client() has the length of the mon_addrs buffer and that is used to ensure nothing goes beyond its end. Based on all this, there is no reason that a buffer needs to be used to hold a copy of the mon_addrs provided via /sys/bus/rbd/add. Instead, the location within that passed-in buffer can be provided, along with the length of the "token" therein which represents the monitor IP's. A small change to rbd_add_parse_args() allows the address within the buffer to be passed back, and the length is already returned. This now means that, at least from the perspective of this interface, there is no such thing as a list of monitor addresses that is too long. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: have rbd_parse_args() report found mon_addrs sizeAlex Elder
The argument parsing routine already computes the size of the mon_addrs buffer it extracts from the "command." Pass it to the caller so it can use it to provide the length to rbd_get_client(). Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: do a few checks at build timeAlex Elder
This is a bit gratuitous, but there are a few things that can be verified at build time rather than run time, so do that. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: don't use sscanf() in rbd_add_parse_args()Alex Elder
Make use of a few simple helper routines to parse the arguments rather than sscanf(). This will treat both missing and too-long arguments as invalid input (rather than silently truncating the input in the too-long case). In time this can also be used by rbd_add() to use the passed-in buffer in place, rather than copying its contents into new buffers. It appears to me that the sscanf() previously used would not correctly handle a supplied snapshot--the two final "%s" conversion specifications were not separated by a space, and I'm not sure how sscanf() handles that situation. It may not be well-defined. So that may be a bug this change fixes (but I didn't verify that). The sizes of the mon_addrs and options buffers are now passed to rbd_add_parse_args(), so they can be supplied to copy_token(). Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: encapsulate argument parsing for rbd_add()Alex Elder
Move the code that parses the arguments provided to rbd_add() (which are supplied via /sys/bus/rbd/add) into a separate function. Also rename the "mon_dev_name" variable in rbd_add() to be "mon_addrs". The variable represents a list of one or more comma-separated monitor IP addresses, each with an optional port number. I think "mon_addrs" captures that notion a little better. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22rbd: simplify error handling in rbd_add()Alex Elder
If a couple pointers are initialized to NULL then a single "out_nomem" label can be used for all of the memory allocation failure cases in rbd_add(). Also, get rid of the "irc" local variable there. There is no real need for "rc" to be type ssize_t, and it can be used in the spot "irc" was. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: reduce memory used for rbd_dev fieldsAlex Elder
The length of the string containing the monitor address specification(s) will never exceed the length of the string passed in to rbd_add(). The same holds true for the ceph + rbd options string. So reduce the amount of memory allocated for these to that length rather than the maximum (1024 bytes). Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: have rbd_get_client() return a rbd_clientAlex Elder
Since rbd_get_client() currently returns an error code. It assigns the rbd_client field of the rbd_device structure it is passed if successful. Instead, have it return the created rbd_client structure and return a pointer-coded error if there is an error. This makes the assignment of the client pointer more obvious at the call site. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: a few simple changesAlex Elder
Here are a few very simple cleanups: - Add a "RBD_" prefix to the two driver name string definitions. - Move the definition of struct rbd_request below struct rbd_req_coll to avoid the need for an empty declaration of the latter. - Move and group the definitions of rbd_root_dev_release() and rbd_root_dev, as well as rbd_bus_type and rbd_bus_attrs[], close to the top of the file. Arrange the latter so rbd_bus_type.bus_attrs can be initialized statically. - Get rid of an unnecessary local variable in rbd_open(). - Rework some hokey logic in rbd_bus_add_dev(), so the value of "ret" at the end is either 0 or -ENOENT to avoid the need for the code duplication that was there. - Rename a goto target in rbd_add(). Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: rename "node_lock"Alex Elder
The spinlock used to protect rbd_client_list is named "node_lock". Rename it to "rbd_client_list_lock" to make it more obvious what it's for. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: move ctl_mutex lock inside rbd_client_create()Alex Elder
Since rbd_client_create() is only called in one place, move the acquisition of the mutex around that call inside that function. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>