summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2009-12-03drbd_req.c: use part_[inc|dec]_in_flight()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-12-03Merge branch 'master' into for-2.6.33Jens Axboe
2009-12-01aoe: prevent cache aliasesPeter Horton
Prevent the AoE block driver from creating cache aliases of page cache pages on machines with virtually indexed caches. Building kernels on an AT91SAM9G20 board without this patch fails with segmentation faults after a couple of passes. Signed-off-by: Peter Horton <zero@colonel-panic.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-24Fixed a regression in resync decission code drbd_uuid_compare() [Bugz 260]Philipp Reisner
Since 8.3.3 we fail to do the resync when a partial resynch is not possible, but a full synch is necessary. This regression was introduced with 7101539930c0a89146959e7a39c09ad9c3516434 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-24add missing state change on corrupt packet header in drbd_recv_headerLars Ellenberg
Otherwise the 'state fixup' in the receiver will change to Unconnected, but the receiver will terminate itself, and any attempt at 'down'ing that drbd later will block forever. see also Bugz. #259 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-24fix in-kernel configuration serializationLars Ellenberg
this is uncritical, as we still also serialize in userland, but to correctly serialize on the CONFIG_PENDING bit, it must be wait_event(state_wait, \!test_and_set_bit) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-23cciss: change Cmd_sg_list.sg_chain_dma type to dma_addr_tAlex Chiang
A recent commit broke the ia64 build: Author: Don Brace <brace@beardog.cce.hp.com> Date: Thu Nov 12 12:50:01 2009 -0600 cciss: Add enhanced scatter-gather support. because of this hunk: --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h +struct Cmd_sg_list { + SGDescriptor_struct *sgchain; + dma64_addr_t sg_chain_dma; + int chain_block_size; +}; The issue is that dma64_addr_t isn't #define'd on ia64. The way that we're using Cmd_sg_list.sg_chain_dma is to hold an address returned from pci_map_single(). + temp64.val = pci_map_single(h->pdev, + h->cmd_sg_list[c->cmdindex]->sgchain, + len, dir); + + h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val; pci_map_single() returns a dma_addr_t too. This code will still work even on a 32-bit x86 build, where dma_addr_t is defined to be a u32 because it will simply be promoted to the __u64 that temp64.val is defined as. Thus, declaring Cmd_sg_list.sg_chain_dma as dma_addr_t is safe. Cc: Don Brace <brace@beardog.cce.hp.com> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-23cciss: fix scatter gather cleanup problemsStephen M. Cameron
On driver unload, only free up the extra scatter gather data if they were allocated in the first place (the controller supports it) and don't forget to free up the sg_cmd_list array of pointers. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: make device attrs staticAlex Chiang
No need to export those device attributes. In fact, without this patch, we can trip over a build error if cciss is a built-in and another driver also declares and exports attributes with the same name. You'll see errors like: drivers/scsi/built-in.o: multiple definition of `dev_attr_lunid' drivers/block/built-in.o: first defined here Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Fix weird usage of ENXIO in cciss_scsi.cStephen M. Cameron
cciss: Fix weird usage of ENXIO in cciss_scsi.c Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Add enhanced scatter-gather support.Don Brace
cciss: Add enhanced scatter-gather support. For controllers which supported, more than 512 scatter-gather elements per command may be used, and the max transfer size can be increased to 8192 blocks. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Do not automatically rescan on UNIT ATTENTION/LUN DATA CHANGEDStephen M. Cameron
cciss: Do not automatically rescan on UNIT ATTENTION/LUN DATA CHANGED There are problems with doing this. If, say, several logical drives are deleted at once, several such UNIT ATTENTIONS will be encountered, often during the rescan triggered by the first such UNIT ATTENTION. The block layer may be in the midst of trying to add logical drives which were just deleted (resulting in the subsequent UNIT ATTENTION(s).) Making the rescan code robust enough to tolerate this kind of thing is too complicated for the moment. So, for now, we just don't do it. Note: This UNIT ATTENTION/LUN DATA CHANGED situation only occurs on the MSA2012. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Remove unnecessary check in scan_threadStephen M. Cameron
cciss: Remove unnecessary check in scan_thread Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: fix typo that causes scsi status to be lost.Stephen M. Cameron
cciss: fix typo that causes scsi status to be lost. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: remove sendcmd() as it is no longer used.Stephen M. Cameron
cciss: remove sendcmd() as it is no longer used. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: clean up code in cciss_shutdownStephen M. Cameron
cciss: clean up code in cciss_shutdown. Send the flush cache command down with interrupts still enabled, and do not do DMA from the stack. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Remove the "withirq" parameter from various functions where possibleStephen M. Cameron
cciss: Remove the "withirq" parameter from various functions where possible Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Retry driver initiated cmds with unit attention conditionStephen M. Cameron
cciss: Retry driver initiated cmds with unit attention condition Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Fix problem with remove_from_scan_list on driver unloadStephen M. Cameron
cciss: Fix problem with remove_from_scan_list that on driver unload it doesn't remove the controller from the scan list correctly if the controller is currently being scanned for new devices. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13cciss: Make device attributes staticAlex Chiang
cciss: Make device attributes static Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-2.6.33Jens Axboe
2009-11-04drbd: performance - don't lose unplug eventsLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04Do not deadlock in drbd_disconnect() [bugz 258]Philipp Reisner
When there are many blocks on the fly (ua), and the AL gets into "starving" mode (random IO, scattered all over the device), and the connections gets interrupted, the receiver thread deadlocks in the drbd_disconnect() code path. Affected are only nodes in Primary role. The bug triggers most likely on system that mirror over "long distances" Regression introduced shortly before 8.3.3 with git commit 31e0f1250f174ac1ee317f360943a0159e19edc8 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04drbdsetup X resume-io should be usable to resume IO [Bugz 256]Philipp Reisner
When IO gets frozen due to a broken fence-peer script, the user should be able to thaw IO by the resume-io command. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04drbd: fix check for too large lower level deviceLars Ellenberg
To check wether we are truncating a very large device due to limited meta data space, we need to check the ll_dev size. Also improve the printk to suggest "flexible" or "internal". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04fix grammar in printkLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04block/ps3: fix slow VRAM IOHideyuki Sasaki
The current PS3 VRAM driver uses msleep() to wait for completion of RSX DMA transfers between system memory and VRAM. Depending on the system timing, the processing delay and overhead of this msleep() call can significantly impact VRAM driver IO. To avoid the condition, add a short duration (200 usec max) udelay() polling loop before entering the msleep() polling loop. Signed-off-by: Hideyuki Sasaki <xhide@rd.scei.sony.co.jp> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Jim Paris <jim@jtan.com> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03Merge branch 'for-linus' into for-2.6.33Jens Axboe
Conflicts: block/cfq-iosched.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-29loop: fix NULL dereference if mount failsAlexey Dobriyan
Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop") started to pass NULL bdev to ioctl hook. Steps to reproduce: [boot with loop.max_part=1] [mount -o loop something so mount fails] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online CPU 0 Modules linked in: zfs nvidia(P) [last unloaded: zfs] Pid: 15177, comm: mount Tainted: P 2.6.32-rc4-zfs #2 Satellite X200 RIP: 0010:[<ffffffff811486ee>] [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP: 0018:ffff88003b3d5bb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000 R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da FS: 00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920) Stack: ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000 <0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0 <0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000 Call Trace: [<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250 [<ffffffff811547d9>] ? rb_insert_color+0x109/0x140 [<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40 [<ffffffff812f84c6>] ? wait_for_common+0x66/0x170 [<ffffffff8105a280>] ? default_wake_function+0x0/0x10 [<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50 [<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210 [<ffffffff811d2522>] lo_release+0x72/0x80 [<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0 [<ffffffff810f937b>] blkdev_put+0xb/0x10 [<ffffffff810f93b9>] blkdev_close+0x39/0x60 [<ffffffff810ccef3>] __fput+0xd3/0x230 [<ffffffff810cd06d>] fput+0x1d/0x30 [<ffffffff810c9680>] filp_close+0x50/0x80 [<ffffffff81061f11>] put_files_struct+0x81/0x100 [<ffffffff81061fde>] exit_files+0x4e/0x60 [<ffffffff81063ec5>] do_exit+0x6b5/0x730 [<ffffffff8107b279>] ? up_read+0x9/0x10 [<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0 [<ffffffff81063f81>] do_group_exit+0x41/0xc0 [<ffffffff81064012>] sys_exit_group+0x12/0x20 [<ffffffff81030deb>] system_call_fastpath+0x16/0x1b Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86 RIP [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP <ffff88003b3d5bb8> CR2: 00000000000000b8 ---[ end trace c0b4d3c3118d1427 ]--- Fixing recursive fault but reboot is needed! Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-28drbd: fix in_flight rw indexingJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-22virtio_blk: Revert serial number supportRusty Russell
This reverts "Add serial number support for virtio_blk, V4a". Turns out that virtio_pci, lguest and s/390 all have an 8 bit limit on virtio config space, so noone could ever use this. This is coming back later in a cleaner form. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: john cooper <john.cooper@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com>
2009-10-22virtio: let header files include virtio_ids.hChristian Borntraeger
Rusty, commit 3ca4f5ca73057a617f9444a91022d7127041970a virtio: add virtio IDs file moved all device IDs into a single file. While the change itself is a very good one, it can break userspace applications. For example if a userspace tool wanted to get the ID of virtio_net it used to include virtio_net.h. This does no longer work, since virtio_net.h does not include virtio_ids.h. This patch moves all "#include <linux/virtio_ids.h>" from the C files into the header files, making the header files compatible with the old ones. In addition, this patch exports virtio_ids.h to userspace. CC: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-22virtio_blk: revert QUEUE_FLAG_VIRT additionChristoph Hellwig
It seems like the addition of QUEUE_FLAG_VIRT caueses major performance regressions for Fedora users: https://bugzilla.redhat.com/show_bug.cgi?id=509383 https://bugzilla.redhat.com/show_bug.cgi?id=505695 while I can't reproduce those extreme regressions myself I think the flag is wrong. Rationale: QUEUE_FLAG_VIRT expands to QUEUE_FLAG_NONROT which casus the queue unplugged immediately. This is not a good behaviour for at least qemu and kvm where we do have significant overhead for every I/O operations. Even with all the latested speeups (native AIO, MSI support, zero copy) we can only get native speed for up to 128kb I/O requests we already are down to 66% of native performance for 4kb requests even on my laptop running the Intel X25-M SSD for which the QUEUE_FLAG_NONROT was designed. If we ever get virtio-blk overhead low enough that this flag makes sense it should only be set based on a feature flag set by the host. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-13Merge branch 'for-linus' into for-2.6.33Jens Axboe
2009-10-13cciss: Add cciss_allow_hpsa module parameterStephen M. Cameron
Add cciss_allow_hpsa module parameter. This parameter causes the cciss driver to ignore any Smart Array devices known to be supported by the hpsa driver. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-13cciss: Fix multiple calls to pci_release_regionsStephen M. Cameron
Fix multiple calls to pci_release_regions. If cciss_pci_init fails, it already does any necessary call to pci_release_regions, so this does not need to be done again in cciss_init_one in that case. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07drbd: needs __ratelimit()Randy Dunlap
drbd_int.h uses __ratelimit(), so it needs to #include ratelimit.h: drivers/block/drbd/drbd_int.h:1765: error: implicit declaration of function '__ratelimit' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06drbd: Work on permission enforcementPhilipp Reisner
Now we have the capabilities of the sending process available, use them to enforce CAP_SYS_ADMIN. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05drbd: fixup for reverted dual in_flight patchJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05Merge branch 'master' into for-2.6.33Jens Axboe
2009-10-04Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ...
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01drbd: remove tracing bitsJens Axboe
They should be reimplemented in the current scheme. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01dropping unneeded include autoconf.hLars Ellenberg
It is force-included on the gcc command line since at least 2.6.15. Explicit include lines seem to break compilation now in certain configurations. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-01The DRBD driverPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-10-01cciss: fix build when !PROC_FSAlexander Beregalov
Fix these build errors when CONFIG_PROC_FS is not set: drivers/block/cciss.c: In function 'cciss_show_raid_level': drivers/block/cciss.c:623: error: 'RAID_UNKNOWN' undeclared (first use in this function) drivers/block/cciss.c:626: error: 'raid_label' undeclared (first use in this function) drivers/block/cciss.c: In function 'cciss_geometry_inquiry': drivers/block/cciss.c:2696: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01cciss: cciss_host_attr_groups should be constJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01cciss: Dynamically allocate the drive_info_struct for each logical drive.Stephen M. Cameron
cciss: Dynamically allocate the drive_info_struct for each logical drive. This reduces the size of the per-hba ctlr_info structure from 106936 bytes to 8132 bytes. That's on 32-bit systems. On 64-bit systems, the improvement is even bigger. Without this, the ctlr_info struct is so big that the driver won't even load on a 64 bit system if CISS_MAX_LUN was at it's current setting of 1024 logical drives. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01cciss: Add usage_count attribute to each logical drive in /sysStephen M. Cameron
Add usage_count attribute to each logical drive at /sys/devices/<dev>/ccissX/cXdY/usage_count for controller X, logical drive Y. The usage count is the number of times the device has currently been opened. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01cciss: Add a "raid_level" attribute to each logical drive in /sysStephen M. Cameron
and change get rid of some magic numbers in raid lavel decoding. Add raid_level attribute to each logical drive at /sys/devices/<dev>/ccissX/cXdY/raid_level for controller X, logical drive Y Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 18:32:39 +0000