summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2014-03-11xen/blkback: Check for insane amounts of request on the ring (v6).Konrad Rzeszutek Wilk
commit 9371cadbbcc7c00c81753b9727b19fb3bc74d458 upstream. commit 8e3f8755545cc4a7f4da8e9ef76d6d32e0dca576 upstream. Check that the ring does not have an insane amount of requests (more than there could fit on the ring). If we detect this case we will stop processing the requests and wait until the XenBus disconnects the ring. The existing check RING_REQUEST_CONS_OVERFLOW which checks for how many responses we have created in the past (rsp_prod_pvt) vs requests consumed (req_cons) and whether said difference is greater or equal to the size of the ring, does not catch this case. Wha the condition does check if there is a need to process more as we still have a backlog of responses to finish. Note that both of those values (rsp_prod_pvt and req_cons) are not exposed on the shared ring. To understand this problem a mini crash course in ring protocol response/request updates is in place. There are four entries: req_prod and rsp_prod; req_event and rsp_event to track the ring entries. We are only concerned about the first two - which set the tone of this bug. The req_prod is a value incremented by frontend for each request put on the ring. Conversely the rsp_prod is a value incremented by the backend for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when pushing the responses on the ring). Both values can wrap and are modulo the size of the ring (in block case that is 32). Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details. The culprit here is that if the difference between the req_prod and req_cons is greater than the ring size we have a problem. Fortunately for us, the '__do_block_io_op' loop: rc = blk_rings->common.req_cons; rp = blk_rings->common.sring->req_prod; while (rc != rp) { .. blk_rings->common.req_cons = ++rc; /* before make_response() */ } will loop up to the point when rc == rp. The macros inside of the loop (RING_GET_REQUEST) is smart and is indexing based on the modulo of the ring size. If the frontend has provided a bogus req_prod value we will loop until the 'rc == rp' - which means we could be processing already processed requests (or responses) often. The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is b/c it only tracks how many responses we have internally produced and whether we would should process more. The astute reader will notice that the macro RING_REQUEST_CONS_OVERFLOW provides two arguments - more on this later. For example, if we were to enter this function with these values: blk_rings->common.sring->req_prod = X+31415 (X is the value from the last time __do_block_io_op was called). blk_rings->common.req_cons = X blk_rings->common.rsp_prod_pvt = X The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons) is doing: req_cons - rsp_prod_pvt >= 32 Which is, X - X >= 32 or 0 >= 32 And that is false, so we continue on looping (this bug). If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp instead (sring->req_prod) of rc, the this macro can do the check: req_prod - rsp_prov_pvt >= 32 Which is, X + 31415 - X >= 32 , or 31415 >= 32 which is true, so we can error out and break out of the function. Unfortunatly the difference between rsp_prov_pvt and req_prod can be at 32 (which would error out in the macro). This condition exists when the backend is lagging behind with the responses and still has not finished responding to all of them (so make_response has not been called), and the rsp_prov_pvt + 32 == req_cons. This ends up with us not being able to use said macro. Hence introducing a new macro called RING_REQUEST_PROD_OVERFLOW which does a simple check of: req_prod - rsp_prod_pvt > RING_SIZE And with the X values from above: X + 31415 - X > 32 Returns true. Also not that if the ring is full (which is where the RING_REQUEST_CONS_OVERFLOW triggered), we would not hit the same condition: X + 32 - X > 32 Which is false. Lets use that macro. Note that in v5 of this patchset the macro was different - we used an earlier version. [v1: Move the check outside the loop] [v2: Add a pr_warn as suggested by David] [v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan] [v4: Move wake_up after kthread_stop as suggested by Jan] [v5: Use RING_REQUEST_PROD_OVERFLOW instead] [v6: Use RING_REQUEST_PROD_OVERFLOW - Jan's version] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11nbd: correct disconnect behaviorPaul Clements
commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream. Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by: Paul Clements <paul.clements@steeleye.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [xr: Backported to 3.4: adjust context] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22xen-blkfront: handle backend CLOSED without CLOSINGDavid Vrabel
commit 3661371701e714f0cea4120f6a365340858fb4e4 upstream. Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20virtio-blk: Use block layer provided spinlockAsias He
commit 2c95a3290919541b846bee3e0fbaa75860929f53 upstream. Block layer will allocate a spinlock for the queue if the driver does not provide one in blk_init_queue(). The reason to use the internal spinlock is that blk_cleanup_queue() will switch to use the internal spinlock in the cleanup code path. if (q->queue_lock != &q->__queue_lock) q->queue_lock = &q->__queue_lock; However, processes which are in D state might have taken the driver provided spinlock, when the processes wake up, they would release the block provided spinlock. ===================================== [ BUG: bad unlock balance detected! ] 3.4.0-rc7+ #238 Not tainted ------------------------------------- fio/3587 is trying to release lock (&(&q->__queue_lock)->rlock) at: [<ffffffff813274d2>] blk_queue_bio+0x2a2/0x380 but there are no more locks to release! other info that might help us debug this: 1 lock held by fio/3587: #0: (&(&vblk->lock)->rlock){......}, at: [<ffffffff8132661a>] get_request_wait+0x19a/0x250 Other drivers use block layer provided spinlock as well, e.g. SCSI. Switching to the block layer provided spinlock saves a bit of memory and does not increase lock contention. Performance test shows no real difference is observed before and after this patch. Changes in v2: Improve commit log as Michael suggested. Cc: virtualization@lists.linux-foundation.org Cc: kvm@vger.kernel.org Signed-off-by: Asias He <asias@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04xen/blkback: fix reference countingVegard Nossum
commit ea5ec76d76da9279d12027c1828544c5ccbe7932 upstream. If the permission check fails, we drop a reference to the blkif without having taken it in the first place. The bug was introduced in commit 604c499cbbcc3d5fe5fb8d53306aa0fae1990109 (xen/blkback: Check device permissions before allowing OP_DISCARD). Cc: Jan Beulich <JBeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04loop: fix crash if blk_alloc_queue failsMikulas Patocka
commit 3ec981e30fae1f3c8728a05c730acaa1f627bcfb upstream. loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[<ffffffff812057c9>] [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop] [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop] [<ffffffff81217b74>] idr_for_each+0x104/0x190 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop] [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop] [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP <ffff88043d21fe10> CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29block: fix a probe argument to blk_register_regionMikulas Patocka
commit a207f5937630dd35bd2550620bef416937a1365e upstream. The probe function is supposed to return NULL on failure (as we can see in kobj_lookup: kobj = probe(dev, index, data); ... if (kobj) return kobj; However, in loop and brd, it returns negative error from ERR_PTR. This causes a crash if we simulate disk allocation failure and run less -f /dev/loop0 because the negative number is interpreted as a pointer: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b4 IP: [<ffffffff8118b188>] __blkdev_get+0x28/0x450 PGD 23c677067 PUD 23d6d1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop hpfs nvidia(PO) ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_powersave cpufreq_conservative hid_generic spadfs usbhid hid fuse raid0 snd_usb_audio snd_pcm_oss snd_mixer_oss md_mod snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib dmi_sysfs snd_rawmidi nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd soundcore lm85 hwmon_vid ohci_hcd ehci_pci ehci_hcd serverworks sata_svw libata acpi_cpufreq freq_table mperf ide_core usbcore kvm_amd kvm tg3 i2c_piix4 libphy microcode e100 usb_common ptp skge i2c_core pcspkr k10temp evdev floppy hwmon pps_core mii rtc_cmos button processor unix [last unloaded: nvidia] CPU: 1 PID: 6831 Comm: less Tainted: P W O 3.10.15-devel #18 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff880203cc6bc0 ti: ffff88023e47c000 task.ti: ffff88023e47c000 RIP: 0010:[<ffffffff8118b188>] [<ffffffff8118b188>] __blkdev_get+0x28/0x450 RSP: 0018:ffff88023e47dbd8 EFLAGS: 00010286 RAX: ffffffffffffff74 RBX: ffffffffffffff74 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88023e47dc18 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88023f519658 R13: ffffffff8118c300 R14: 0000000000000000 R15: ffff88023f519640 FS: 00007f2070bf7700(0000) GS:ffff880247400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002b4 CR3: 000000023da1d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 0000000000000002 0000001d00000000 000000003e47dc50 ffff88023f519640 ffff88043d5bb668 ffffffff8118c300 ffff88023d683550 ffff88023e47de60 ffff88023e47dc98 ffffffff8118c10d 0000001d81605698 0000000000000292 Call Trace: [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff8118c10d>] blkdev_get+0x1dd/0x370 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff8118c365>] blkdev_open+0x65/0x80 [<ffffffff8114d12e>] do_dentry_open.isra.18+0x23e/0x2f0 [<ffffffff8114d214>] finish_open+0x34/0x50 [<ffffffff8115e122>] do_last.isra.62+0x2d2/0xc50 [<ffffffff8115eb58>] path_openat.isra.63+0xb8/0x4d0 [<ffffffff81115a8e>] ? might_fault+0x4e/0xa0 [<ffffffff8115f4f0>] do_filp_open+0x40/0x90 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50 [<ffffffff8116db85>] ? __alloc_fd+0xa5/0x1f0 [<ffffffff8114e45f>] do_sys_open+0xef/0x1d0 [<ffffffff8114e559>] SyS_open+0x19/0x20 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: 44 00 00 55 48 89 e5 41 57 49 89 ff 41 56 41 89 d6 41 55 41 54 4c 8d 67 18 53 48 83 ec 18 89 75 cc e9 f2 00 00 00 0f 1f 44 00 00 <48> 8b 80 40 03 00 00 48 89 df 4c 8b 68 58 e8 d5 a4 07 00 44 89 RIP [<ffffffff8118b188>] __blkdev_get+0x28/0x450 RSP <ffff88023e47dbd8> CR2: 00000000000002b4 ---[ end trace bb7f32dbf02398dc ]--- The brd change should be backported to stable kernels starting with 2.6.25. The loop change should be backported to stable kernels starting with 2.6.22. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13cciss: fix info leak in cciss_ioctl32_passthru()Dan Carpenter
commit 58f09e00ae095e46ef9edfcf3a5fd9ccdfad065e upstream. The arg64 struct has a hole after ->buf_size which isn't cleared. Or if any of the calls to copy_from_user() fail then that would cause an information leak as well. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13cpqarray: fix info leak in ida_locked_ioctl()Dan Carpenter
commit 627aad1c01da6f881e7f98d71fd928ca0c316b1a upstream. The pciinfo struct has a two byte hole after ->dev_fn so stack information could be leaked to the user. This was assigned CVE-2013-2147. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04xen/blkback: Check device permissions before allowing OP_DISCARDKonrad Rzeszutek Wilk
commit 604c499cbbcc3d5fe5fb8d53306aa0fae1990109 upstream. We need to make sure that the device is not RO or that the request is not past the number of sectors we want to issue the DISCARD operation for. This fixes CVE-2013-2140. Acked-by: Jan Beulich <JBeulich@suse.com> Acked-by: Ian Campbell <Ian.Campbell@citrix.com> [v1: Made it pr_warn instead of pr_debug] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-13block: do not pass disk names as format stringsKees Cook
commit ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19 upstream. Disk names may contain arbitrary strings, so they must not be interpreted as format strings. It seems that only md allows arbitrary strings to be used for disk names, but this could allow for a local memory corruption from uid 0 into ring 0. CVE-2013-2851 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-20cciss: fix broken mutex usage in ioctlStephen M. Cameron
commit 03f47e888daf56c8e9046c674719a0bcc644eed5 upstream. If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked (as is normal with the Array Configuration Utility) the process will hang as below. It attempts to acquire the same mutex twice, once in do_ioctl() and once in cciss_unlocked_open(). The BKL was recursive, the mutex isn't. Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013 [...] acu D 0000000000000001 0 3246 3191 0x00000080 Call Trace: schedule+0x29/0x70 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0x17b/0x220 mutex_lock+0x2b/0x50 cciss_unlocked_open+0x2f/0x110 [cciss] __blkdev_get+0xd3/0x470 blkdev_get+0x5c/0x1e0 register_disk+0x182/0x1a0 add_disk+0x17c/0x310 cciss_add_disk+0x13a/0x170 [cciss] cciss_update_drive_info+0x39b/0x480 [cciss] rebuild_lun_table+0x258/0x370 [cciss] cciss_ioctl+0x34f/0x470 [cciss] do_ioctl+0x49/0x70 [cciss] __blkdev_driver_ioctl+0x28/0x30 blkdev_ioctl+0x200/0x7b0 block_ioctl+0x3c/0x40 do_vfs_ioctl+0x89/0x350 SyS_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b This mutex usage was added into the ioctl path when the big kernel lock was removed. As it turns out, these paths are all thread safe anyway (or can easily be made so) and we don't want ioctl() to be single threaded in any case. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07drivers/block/brd.c: fix brd_lookup_page() raceBrian Behlendorf
commit dfd20b2b174d3a9b258ea3b7a35ead33576587b1 upstream. The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reported-by: Chris Wedgwood <cw@f00f.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-19drbd: fix for deadlock when using automatic split-brain-recoveryPhilipp Reisner
commit 7c689e63a847316c1b2500f86891b0a574ce7e69 upstream. With an automatic after split-brain recovery policy of "after-sb-1pri call-pri-lost-after-sb", when trying to drbd_set_role() to R_SECONDARY, we run into a deadlock. This was first recognized and supposedly fixed by 2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are" replacing drbd_set_role() with drbd_change_state() in that code-path, but the first hunk of that patch forgets to remove the drbd_set_role(). We apparently only ever tested the "two primaries" case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Revert "xen/blkback: Don't trust the handle from the frontend."Greg Kroah-Hartman
This reverts commit c93c85196e2c7001daa8a04b83a9d6dd4febfb59 which is commit 01c681d4c70d64cb72142a2823f27c4146a02e63 upstream. It shouldn't have been applied to the 3.4-stable tree, sorry about that. Reported-by: William Dauchy <wdauchy@gmail.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05aoe: reserve enough headroom on skbsEric Dumazet
[ Upstream commit 91c5746425aed8f7188a351f1224a26aa232e4b3 ] Some network drivers use a non default hard_header_len Transmitted skb should take into account dev->hard_header_len, or risk crashes or expensive reallocations. In the case of aoe, lets reserve MAX_HEADER bytes. David reported a crash in defxx driver, solved by this patch. Reported-by: David Oostdyk <daveo@ll.mit.edu> Tested-by: David Oostdyk <daveo@ll.mit.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05loop: prevent bdev freeing while device in useAnatol Pomozov
commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream. struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05xen-blkback: fix dispatch_rw_block_io() error pathJan Beulich
commit 0e5e098ac22dae38f957e951b70d3cf73beff0f7 upstream. Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions). Also remove a misleading and a stale (after said commit) comment. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05xen/blkback: correctly respond to unknown, non-native requestsDavid Vrabel
commit 0e367ae46503cfe7791460c8ba8434a5d60b2bd5 upstream. If the frontend is using a non-native protocol (e.g., a 64-bit frontend with a 32-bit backend) and it sent an unrecognized request, the request was not translated and the response would have the incorrect ID. This may cause the frontend driver to behave incorrectly or crash. Since the ID field in the request is always in the same place, regardless of the request type we can get the correct ID and make a valid response (which will report BLKIF_RSP_EOPNOTSUPP). This bug affected 64-bit SLES 11 guests when using a 32-bit backend. This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES source) and would crash in blkif_int() as the ID in the response would be invalid. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20loopdev: remove an user triggerable oopsGuo Chao
commit b1a6650406875b9097a032eed89af50682fe1160 upstream. When loopdev is built as module and we pass an invalid parameter, loop_init() will return directly without deregister misc device, which will cause an oops when insert loop module next time because we left some garbage in the misc device list. Test case: sudo modprobe loop max_part=1024 (failed due to invalid parameter) sudo modprobe loop (oops) Clean up nicely to avoid such oops. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20loopdev: fix a deadlockGuo Chao
commit 5370019dc2d2c2ff90e95d181468071362934f3a upstream. bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04xen/blkback: Don't trust the handle from the frontend.Konrad Rzeszutek Wilk
commit 01c681d4c70d64cb72142a2823f27c4146a02e63 upstream. The 'handle' is the device that the request is from. For the life-time of the ring we copy it from a request to a response so that the frontend is not surprised by it. But we do not need it - when we start processing I/Os we have our own 'struct phys_req' which has only most essential information about the request. In fact the 'vbd_translate' ends up over-writing the preq.dev with a value from the backend. This assignment of preq.dev with the 'handle' value is superfluous so lets not do it. Acked-by: Jan Beulich <jbeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04xen-blkback: do not leak mode propertyJan Beulich
commit 9d092603cc306ee6edfe917bf9ab8beb5f32d7bc upstream. "be->mode" is obtained from xenbus_read(), which does a kmalloc() for the message body. The short string is never released, so do it along with freeing "be" itself, and make sure the string isn't kept when backend_changed() doesn't complete successfully (which made it desirable to slightly re-structure that function, so that the error cleanup can be done in one place). Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sunvdc: Fix off-by-one in generic_request().David S. Miller
[ Upstream commit f4d9605434c0fd4cc8639bf25cfc043418c52362 ] The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21drbd: add missing part_round_stats to _drbd_start_io_acctPhilipp Reisner
commit 72585d2428fa3a0daab02ebad1f41e5ef517dbaa upstream. Without this, iostat frequently sees bogus svctime and >= 100% "utilization". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Raoul Bhatia <raoul@bhatia.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: do not allow remove of mounted-on imageAlex Elder
There is no check in rbd_remove() to see if anybody holds open the image being removed. That's not cool. Add a simple open count that goes up and down with opens and closes (releases) of the device, and don't allow an rbd image to be removed if the count is non-zero. Protect the updates of the open count value with ctl_mutex to ensure the underlying rbd device doesn't get removed while concurrently being opened. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> (based on commit 42382b709bd1d143b9f0fa93e0a3a1f2f4210707)
2013-01-17rbd: fix bug in rbd_dev_id_put()Alex Elder
In rbd_dev_id_put(), there's a loop that's intended to determine the maximum device id in use. But it isn't doing that at all, the effect of how it's written is to simply use the just-put id number, which ignores whole purpose of this function. Fix the bug. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> (cherry picked from commit b213e0b1a62637b2a9395a34349b13d73ca2b90a) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: BUG on invalid layoutSage Weil
This shouldn't actually be possible because the layout struct is constructed from the RBD header and validated then. [elder@inktank.com: converted BUG() call to equivalent rbd_assert()] Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> (based on commit 6cae3717cddaf8e5e96e304733dca66e40d56f89)
2013-01-17rbd: kill notify_timeout optionAlex Elder
The "notify_timeout" rbd device option is never used, so get rid of it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> (cherry picked from commit 84d34dcc116e117a41c6fc8be13430529fc2d9e7) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: add read_only rbd map optionAlex Elder
Add the ability to map an rbd image read-only, by specifying either "read_only" or "ro" as an option on the rbd "command line." Also allow the inverse to be explicitly specified using "read_write" or "rw". Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> (based on commit cc0538b62c839c2df7b9f8378bb37e3b35faa608)
2013-01-17rbd: kill create_snap sysfs entryAlex Elder
Josh proposed the following change, and I don't think I could explain it any better than he did: From: Josh Durgin <josh.durgin@inktank.com> Date: Tue, 24 Jul 2012 14:22:11 -0700 To: ceph-devel <ceph-devel@vger.kernel.org> Message-ID: <500F1203.9050605@inktank.com> From: Josh Durgin <josh.durgin@inktank.com> Right now the kernel still has one piece of rbd management duplicated from the rbd command line tool: snapshot creation. There's nothing special about snapshot creation that makes it advantageous to do from the kernel, so I'd like to remove the create_snap sysfs interface. That is, /sys/bus/rbd/devices/<id>/create_snap would be removed. Does anyone rely on the sysfs interface for creating rbd snapshots? If so, how hard would it be to replace with: rbd snap create pool/image@snap Is there any benefit to the sysfs interface that I'm missing? Josh This patch implements this proposal, removing the code that implements the "snap_create" sysfs interface for rbd images. As a result, quite a lot of other supporting code goes away. [elder@inktank.com: commented out rbd_req_sync_exec() to avoid warning] Suggested-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> (based on commit 02cdb02ceab1f3dd9ac2bc899fc51f0e0e744782)
2013-01-17rbd: drop dev reference on error in rbd_open()Alex Elder
If a read-only rbd device is opened for writing in rbd_open(), it returns without dropping the just-acquired device reference. Fix this by moving the read-only check before getting the reference. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> (cherry picked from commit 340c7a2b2c9a2da640af28a8c196356484ac8b50) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: send header version when notifyingJosh Durgin
Previously the original header version was sent. Now, we update it when the header changes. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit a71b891bc7d77a070e723c8c53d1dd73cf931555) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: use reference counting for the snap contextJosh Durgin
This prevents a race between requests with a given snap context and header updates that free it. The osd client was already expecting the snap context to be reference counted, since it get()s it in ceph_osdc_build_request and put()s it when the request completes. Also remove the second down_read()/up_read() on header_rwsem in rbd_do_request, which wasn't actually preventing this race or protecting any other data. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit d1d25646543134d756a02ffe4e02073faa761f2c) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: set image size when header is updatedJosh Durgin
The image may have been resized. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit 93a24e084d67ba2fcb9a4c289135825b623ec864) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: expose the correct size of the device in sysfsJosh Durgin
If an image was mapped to a snapshot, the size of the head version would be shown. Protect capacity with header_rwsem, since it may change. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit a51aa0c042fa39946dd017d5f91a073300a71577) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: only reset capacity when pointing to headJosh Durgin
Snapshots cannot be resized, and the new capacity of head should not be reflected by the snapshot. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit 474ef7ce832d471148f63a9d07f67fc5564834f1) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17rbd: return errors for mapped but deleted snapshotJosh Durgin
When a snapshot is deleted, the OSD will return ENOENT when reading from it. This is normally interpreted as a hole by rbd, which will return zeroes. To minimize the time in which this can happen, stop requests early when we are notified that our snapshot no longer exists. [elder@inktank.com: updated __rbd_init_snaps_header() logic] Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit e88a36ec961b8c1899c59c5e4ae35a318c0209d3) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Conflicts: drivers/block/rbd.c
2013-01-17aoe: do not call bdi_init after blk_alloc_queueEd Cashin
commit 0a41409c518083133e79015092585d68915865be upstream, but doesn't apply, so this version is different for older kernels than 3.7.x blk_alloc_queue has already done a bdi_init, so do not bdi_init again in aoeblk_gdalloc. The extra call causes list corruption in the per-CPU backing dev info stats lists. Affected users see console WARNINGs about list_del corruption on percpu_counter_destroy when doing "rmmod aoe" or "aoeflush -a" when AoE targets have been detected and initialized by the system. The patch below applies to v3.6.11, with its v47 aoe driver. It is expected to apply to all currently maintained stable kernels except 3.7.y. A related but different fix has been posted for 3.7.y. References: RedHat bugzilla ticket with original report https://bugzilla.redhat.com/show_bug.cgi?id=853064 LKML discussion of bug and fix http://thread.gmane.org/gmane.linux.kernel/1416336/focus=1416497 Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03NVMe: Fix uninitialized iod compiler warningKeith Busch
commit c7d36ab8fa04c213328119a9c0d66985fe204ee5 upstream. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26rbd: Fix ceph_snap_context size calculationYan, Zheng
(cherry picked from commit f9f9a1904467816452fc70740165030e84c2c659) ceph_snap_context->snaps is an u64 array Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26rbd: store snapshot id instead of indexJosh Durgin
(cherry picked from commit 77dfe99fe3cb0b2b0545e19e2d57b7a9134ee3c0) When a device was open at a snapshot, and snapshots were deleted or added, data from the wrong snapshot could be read. Instead of assuming the snap context is constant, store the actual snap id when the device is initialized, and rely on the OSDs to signal an error if we try reading from a snapshot that was deleted. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26rbd: protect read of snapshot sequence numberJosh Durgin
(cherry picked from commit 403f24d3d51760a8b9368d595fa5f48c309f1a0f) This is updated whenever a snapshot is added or deleted, and the snapc pointer is changed with every refresh of the header. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26rbd: don't hold spinlock during messenger flushAlex Elder
(cherry picked from commit cd9d9f5df6098c50726200d4185e9e8da32785b3) A recent change made changes to the rbd_client_list be protected by a spinlock. Unfortunately in rbd_put_client(), the lock is taken before possibly dropping the last reference to an rbd_client, and on the last reference that eventually calls flush_workqueue() which can sleep. The problem was flagged by a debug spinlock warning: BUG: spinlock wrong CPU on CPU#3, rbd/27814 The solution is to move the spinlock acquisition and release inside rbd_client_release(), which is the spot where it's really needed for protecting the removal of the rbd_client from the client list. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05floppy: do put_disk on current dr if blk_init_queue failsHerton Ronaldo Krzesinski
commit 238ab78469c6ab7845b43d5061cd3c92331b2452 upstream. If blk_init_queue fails, we do not call put_disk on the current dr (dr is decremented first in the error handling loop). Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13aoe: assert AoE packets marked as requiring no checksumEd Cashin
[ Upstream commit 8babe8cc6570ed896b7b596337eb8fe730c3ff45 ] In order for the network layer to see that AoE requires no checksumming in a generic way, the packets must be marked as requiring no checksum, so we make this requirement explicit with the assertion. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02xen/m2p: do not reuse kmap_op->dev_bus_addrStefano Stabellini
commit 2fc136eecd0c647a6b13fcd00d0c41a1a28f35a5 upstream. If the caller passes a valid kmap_op to m2p_add_override, we use kmap_op->dev_bus_addr to store the original mfn, but dev_bus_addr is part of the interface with Xen and if we are batching the hypercalls it might not have been written by the hypervisor yet. That means that later on Xen will write to it and we'll think that the original mfn is actually what Xen has written to it. Rather than "stealing" struct members from kmap_op, keep using page->index to store the original mfn and add another parameter to m2p_remove_override to get the corresponding kmap_op instead. It is now responsibility of the caller to keep track of which kmap_op corresponds to a particular page in the m2p_override (gntdev, the only user of this interface that passes a valid kmap_op, is already doing that). Reported-and-Tested-By: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02nbd: clear waiting_queue on shutdownPaul Clements
commit fded4e090c60100d709318896c79816d68d5b47d upstream. Fix a serious but uncommon bug in nbd which occurs when there is heavy I/O going to the nbd device while, at the same time, a failure (server, network) or manual disconnect of the nbd connection occurs. There is a small window between the time that the nbd_thread is stopped and the socket is shutdown where requests can continue to be queued to nbd's internal waiting_queue. When this happens, those requests are never completed or freed. The fix is to clear the waiting_queue on shutdown of the nbd device, in the same way that the nbd request queue (queue_head) is already being cleared. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02cciss: fix handling of protocol errorStephen M. Cameron
commit 2453f5f992717251cfadab6184fbb3ec2f2e8b40 upstream. If a command completes with a status of CMD_PROTOCOL_ERR, this information should be conveyed to the SCSI mid layer, not dropped on the floor. Unlike a similar bug in the hpsa driver, this bug only affects tape drives and CD and DVD ROM drives in the cciss driver, and to induce it, you have to disconnect (or damage) a cable, so it is not a very likely scenario (which would explain why the bug has gone undetected for the last 10 years.) Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14cciss: fix incorrect scsi status reportingStephen M. Cameron
commit b0cf0b118c90477d1a6811f2cd2307f6a5578362 upstream. Delete code which sets SCSI status incorrectly as it's already been set correctly above this incorrect code. The bug was introduced in 2009 by commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be lost.") Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Roel van Meer <roel.vanmeer@bokxing.nl> Tested-by: Roel van Meer <roel.vanmeer@bokxing.nl> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-04 16:14:03 +0000